REPAIRS TO POINT WIRING AND SUMMER APPLIANCES TO OTM AND MD ACCN AT AGE AURANGABAD UNDER GE (S) AHMEDNAGAR

Amount

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations /laying of cables or for manholes, pits etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming of soil in layers not exceeding 25 cm thick complete all as specified and as directed

Removing excavated soil to distance not exceeding 50 m and deposting where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed

M&L for sand cushioning with natural dry unwashed river sand and punning down in layers complete all as specified and as directed Note : For measurement purpose only punned thickness of sand shall be considered.

Supply and laying reinforced factory made precast concrete cable protection covers class LV type-2, flat size 250mm x 150mm x 40mm, ISI marked complete all as specified and as directed

Taking down carefully copper/aluminum point wiring (Light, Fan, Socket or power) complete including fittings such as switches, ceiling rose, regulator, sockets etc and making good disturbed surfaces of walls, floors etc and matching with existing surface complete all as specified and as directed.

M&L for point wiring (Light Point) complete with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insluated and unsheathed cable 650/1100 volts grade, confirming to IS-694 1990, drawn through and including PVC casing capping 32mm /25 mm width with all accessories as specified with modular cover plate with frame and modular metal flux boxes, blank plate for mounting fitting & fixture like switches sockets and fan regulators etc including copper earth contunity wire for PVC insulated of size 1.5 Sqmm for one light point controlled by one way switch complete all as specified and as directed.

All as per serial item No. 7 but for one fan point controlled by one way switch and regulator.

All as per serial item No.7 but for one 3 pin socket outlet, 5 Amps on same board.

All as per serial item No 7 but for one 3 pin socket outlet , 5 Amps on independent board but below the switch board of light points in the same vertical plane.

All as per serial Item No 7 but for one light point controlled by two, two way switch.

All as per serial item No 7 but for one bell point controlled by one bell push.

All as per serial item No. 7 but for one 3 pin socket outlet, 5 Amps on independent board complete all as specified and as directed.

All as per serial item No.7 but with 4.0 Sqmm copper conductor cable for socket outlet 15 Amps complete all as specified and as directed.

S&F modular switch, single pole, one way, 5/6 Amps, 1 module complete all as specified and as directed.

S&F in repairs, modular switch, single pole, one way, 16 Amps, 1 module complete all as specified and as directed

S&F modular bell switch, 5/6 Amp, 1 module complete all as specified and as directed.

S&F modular switch, 2 way, 1 module complete all as specified and directed.

S&F modular socket, 6 Amp, 2/3 pin, combined, 2 module complete all as specified and as directed

S&F modular socket, 6 A/16 Amp, 2/3 pin, combined, 2 module complete all as specified and as directed.

S&F modular fan regulator, step type, 120W, 2 module complete all as specified and as directed

S&F ceiling rose, surface bakelite, three terminal type complete all as specified and as directed

S&F in repairs, decorative, ultra slim, square profile LED lighting fixture with extruded polycarbonate, environmental friendly , energy efficient of capacity 18 Watt , appx 4 feet long, 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

S&F in repairs, decorative, ultra slim, square profile LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient of capacity 10 Watt, 2 feet long, 3000 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

S&F in repairs, LED luminaire, 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser, soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed

S&F in repairs, unique slimest recess cum surface LED panel LED luminaire, 300 mm x 300 mm, 24 watt, 6500K ,220 V AC with high efficiency PMMA diffuser, soft glare free light complete with driver, holders & LED lamp including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed

S&F in repairs, LED light fitting 1x 9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

S&F in repairs, lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in repairs, lamp LED 9/10 Watt, 230 volts 50 Hz AC complete all as specified and as directed.

S&F in repairs, MCB DB double door 4 way TPN with suitable rated busbar 240 V complete all as specified and as directed

S&F in repairs, MCB DB double door 16 way SPN with suitable rated busbar 240 V complete all as specified and as directed

S&F in repairs, MCB DB double door 12 way SPN with suitable rated busbar 240 V complete all as specified and as directed

S&F in repairs, MCB DB double door 8 way SPN with suitable rated busbar 240 V complete all as specified and as directed

S&F in repairs, MCB DB double door 4 way SPN with suitable rated busbar 240 V complete all as specified and as directed

S&F in repairs, MCB DB single door 2 way SPN with suitable rated busbar 240 V complete all as specified and as directed

S&F in repairs, of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and as directed

S&F in repairs, of MCB SP, C Curve, 6 to 32 Amps 10 KA single pole AC 230 volts complete all as specified and as directed.

S&F in repairs, of MCB SPN, C Curve, 40-63 Amps 10 KA single pole AC 230 volts complete all as specified and as directed.

S&F in repairs, of MCB TPN, C Curve 40-100 Amps, 415 V complete all as specified and as directed.

S&F in repairs, of MCB TPN, C Curve 16-32 Amps, 415 V complete all as specified and as directed.

S&F in repairs, bell multi music type, AC, 230 volts, single phase complete all as specified and as directed.

M&L for sub main wiring with 2 runs of 10 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size casing / caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 10 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of casing/caping, complete all as specified and as directed. NOTE: (i) Proper colour coding shall be adopted for wiring (for phase- RED, YELLOW, BLUE for Earth-Green and Neutral-Black) (ii) Two run of 10 Sqmm (one run for phase & one run for neutral) with one run of 10 sqmm cable for earth and one run of PVC casing & caping shall be measured as one unit.

M&L for sub main wiring with 2 runs of 6.0sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC Casing Caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 6.0 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing / caping / Conduit complete all as specified and as directed. Note : Two runs of 6.0 Sqmm cable, one run of 6.0 Sqmm cable and one run of PVC casing/caping shall be measured as one unit.

M&L for sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC Casing Caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 4.0 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/Conduit, complete all as specified and as directed. Note : Two runs of 4.0 Sqmm cable, one run of 4.0 Sqmm cable and one run of PVC casing/caping shall be measured as one unit.

M&L for sub main wiring with 2 runs of 2.5 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 2.5 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/conduit, complete all as specified and as directed. Note : Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm cable and one run of PVC casing/caping shall be measured as one unit.

S&F in repairs, post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including suitable size of GI pipe as per lamp size including connection and testing complete all as specified and as directed.

S&F in repairs, 1100 V Gde heavy duty cable PVC insulated aluminium Stranded conductor served with inner sheathing of PVC tape and over all pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size 4.0 sqmm complete all as specified and as directed.

S&F in repairs,t 1100 V Gde heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size 6.0 sqmm complete all as specified and as directed.

S&F in repairs, 1100 V Gde heavy duty cable PVC insulated aluminium Stranded conductor served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistrand conductor size 10.0 sqmm complete all as specified and as directed.

S&F in repairs, of plug top 3 pin of capacity 5/6 Amp complete all as specified and as directed

S&F in repairs, of plug top 3 pin of capacity 15/16 Amp complete all as specified and as directed

S&F in repairs, of LED driver unit ISI marked suitable for recessed mounting fitting of 15/18 Watts complete all as specified and as directed.

S&F in repairs, LED driver unit, ISI marked suitable for recessed mounting fitting of 24 Watts complete all as specified and as directed.

S&F in repairs, garden light of bamboo type -IP 65 of capacity 9/8 watt, 6000K new generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source with PCC base for fixing of lights with proper nut & bolts including electric connection wire complete all as specified and as directed. Make- Cat part No of Havells LHEVBDP7IN6K008 or eqivelant to Crompton/Bajaj/Philips/C&S/Surya/Halonix/Luker

S&F in repairs, 35/40 Watt building mounted LED security light fitting complete made up of pressure die cast housing with toughned glass and individual high power LED with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2 m long bend to shape required fixed to pole / wall with 02 Nos mld steel clamps made out of flat iron 40 x 5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting, complete all as specified and as directed

M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

Disconnecting electrical connection, dismantling the accessories carefully of 1.5 tonne air conditioner and transporting to workshop if required for repairs, cleaning the air filters and exposed surface and refixing the air conditioner in its original position after repairs and testing all as specified and as directed. Note : (i) The parts to be replaced shall be of make as per AC under repair (ii) S&F in repairs of parts will be measured and paid separately.

Disconnecting, cutting and taking out unserviceable sealed unit compressor of window type Air conditioner 1.5/2.0 Ton capacity, any make & model and supply and fixing new compressor of same make as existing for window type air conditioner 1.5/2.0 Ton capacity soldering, welding, brazing as required including charging of refrigerant gas and oil in the exchanged compressor, making electric & mechanical connections of air conditioner at site and testing on load complete all as specified and as directed

Disconnecting, cutting and taking out unserviceable sealed unit compressor of split type Air conditioner 1.5/2.0 Ton capacity, any make and model and supply and fixing new compressor of same make as existing for split type air conditioner 1.5/2.0 Ton capacity soldering, welding, brazing as required including charging of refrigerant gas and oil in the exchanged compressor, making electric & mechanical connections of air conditioner at site and testing on load complete all as specified and directed.

S&F in repairs, starting relay for 1.5/2.0 TR air conditioner complete all as specified and as directed.

S&F in repairs, gas regulating valve for 1.5/2.0 TR air conditioner complete all as specified and as directed.

S&F in repairs, over load protection relay for 1.5/2.0 TR air conditioner complete all as specified and as directed. .

S&F in repairs, thermostate switch for 1.5/2.0 TR air conditioner complete all as specified and as directed. .

S&F in repairs, starting capacitor 80/100 Mfd for 1.5/2.0 TR air conditioner all as specified and as directed. .

S&F in repairs, running capacitor 36 Mfd for 1.5/2.0 TR air conditioner complete all as specified and as directed. .

S&F in repairs, front panel PVC grill type for 1.5/2.0 TR air conditioner complete all as specified and as directed. .

S&F in repairs, air filter for 1.5/2.0 TR air conditioner complete all as specified and as directed.

Supply only in replacement, remote control as per existing model suitable for AC of any capacity all as specified and as directed. .

S&F in repairs, blower motor, 230 V, AC, 50 HZ, single phase complete with blower fan for split type AC of 1.5/2.0 TR capacity of any make complete all as specified and as directed.

S&F in replacement PCB card suitable for 1.5/2.0TR capacity of split AC's complete all as specified and as directed.

S&F in repairs, blower motor 230 V, AC, 50 HZ, single phase complete with fan blade, 230 volts, suitable for 1.5/2.0 TR window type AC, any make all as specified and as directed.

S&F in repairs, evaporator suitable for 1.5TR window type AC, any make all as specified and as directed.

Taking out window/split AC any type for servicing and cleaning with vaccume cleaner/soft brissle brush/washing as required and removing all dirt, checking wiring and other components and refixing the same in its position including testing on load complete all as specified and as directed.

Disconnecting electrical connection, dismantling the accessories carefully of 165 to 310 Ltrs capacity refrigerator, any type/make and transporting to workshop if required for repairs, cleaning the exposed surface and refixing the refrigerator in its original position after repairs and testing all as specified and as directed. Notes : (i) The parts to be replaced shall be of existing make of refrigerator. (ii) Parts shall be measured and paid separately assupply and fix in repairs .

Disconnecting, cutting and taking out unserviceable sealed unit compressor of refrigerator upto 165 ltrs capacity, any make & model and supply and fixing company repaired compressor of same make for refrigerator, soldering, welding, brazing as required including gas charging in the compressor, making electric & mechanical connections at site and testing on load complete all as specified and as directed.

Disconnecting, cutting and taking out unserviceable sealed unit compressor of refrigerator above 165 ltrs and upto 310 ltrs capacity, any make & model and supply and fixing company repaired compressor of same make for refrigerator, soldering, welding, brazing as required including gas charging in the compressor, making electric and mechanical connections at site and testing on load complete all as specified and as directed.

S&F in repairs, starting relay for 165 to 310 Ltrs capacity refrigerator all as specified and as directed.

S&F in repairs, thermostatic switch auto type for 165 to 310 Ltrs capacity refrigerator all as specified and as directed.

S&F in repairs, condenser coil unit with necessary fixing arrangements and testing for 165 to 310 Ltrs capacity refrigerator all as specified and as directed.

S&F in repairs, Lamp 15 watt with holder and bracket for 165 to 310 Ltrs capacity refrigerator complete all as specified and as directed.

S&F in repairs, freezer assembly and testing for 165 to 310 Ltrs capacity refrigerator complete all as specified and as directed.

S&F in repairs, freezer door handle with springs/hinges for 165 to 310 Ltrs capacity refrigerator complete all as specified and as directed.

S&F in repairs, magnetic rubber gasket for 165 to 310 Ltrs capacity refrigerator complete all as specified and as directed.

S&F in repairs, door switch for 165 to 310 Ltrs capacity refrigerator complete all as specified and as directed.

S&F in repairs, bottle shelves for 165 to 310 Ltrs capacity refrigerator complete all as specified and as directed.

S&F in repairs, vegetable tray for 165 to 310 Ltrs capacity refrigerator complete all as specified and as directed.

S&F in repairs, cabinet shelves for 165 to 310 Ltrs capacity refrigerator complete all as specified and as directed.

S&F in repairs, crisper glass for 165 to 310 Ltrs capacity refrigerator complete all as specified and as directed.

Disconnecting water and electrical connection, dismantling the accessories carefully of water cooler, 40-80 Ltrs and 120-160 Ltrs of any type and make and transporting to workshop if required for repairs, cleaning the exposed surface and refixing the water cooler in its original position, connecting up of water/electric connections after repairs and testing all as specified and as directed. Note : (i) The parts to be replaced shall be of existing make of refrigerator. (ii) Parts shall be measured and paid separately as supply and fix in repairs.

Disconnecting, cutting and taking out unserviceable sealed unit compressor of water cooler storage type 40-80 Ltrs capacity any make & model and supply and fixing compressor of same make for water cooler storage type 40-80 Ltrs capacity soldering, welding, brazing as required including charging of refrigerant gas and oil in the exchanged compressor, making electric & mechanical connections and water connection, installation of water cooler at site and testing on load complete all as specified and as directed.

Disconnecting, cutting and taking out unserviceable sealed unit compressor of water cooler storage type 120-160 Ltrs capacity any make & model and supply and fixing compressor of same make for water cooler storage type 120-160 Ltrs capacity soldering, welding, brazing as required including charging of refrigerant gas and oil in the exchanged compressor, making electric and mechanical connections and water connection, installations of water cooler at site and testing on load complete all as specified and as directed.

S&F in repairs, condensing coil unit suitable for water cooler of cap 40-80 litre complete all as specified and as directed.

S&F in repairs, condensing coil unit suitable for water cooler of cap 120-160 litre complete all as specified and as directed.

S&F in repairs, relay for water cooler any capacity complete all as specified and as directed.

S&F in repairs, over load protector relay for water cooler any capacity complete all as specified and as directed.

S&F in repairs, thermostat switch suitable for water cooler any capacity complete all as specified and as directed.

S&F in repairs, condenser motor with blade and fixing brackets with complete assembly for water cooler complete all as specified and as directed.

S&F in repairs, condenser filter with capilary tube for water cooler complete all as specified and as directed.

S&F in repairs, capacitor 10 mfd including necessary electrical connections, lugs, insulation tape etc complete suitable for water cooler of any capacity, all as specified and as directed.

S&F in repairs, running capacitor 36 Mfd for water cooler complete all as specified and as directed.

S&F in repairs, wiring kit for internal connections for water cooler complete all as specified and as directed.

S&F in repairs, push cock/lift cock of brass, 15 mm bore, chromium plated, self closing type with back plate assembly, suitable for water cooler of any capacity complete all as specified and as directed.

S&F in repairs, float vlave assembly, 15 mm bore with brass body and polythene float ball, high pressure type suitable for water cooler complete all as specified and as directed.

S&F in repairs, stainless steel water tray, double tap type including 20mm bore drain out plug suitable for water coller complete all as required at site and as directed.

S&F in repairs, 20mm bore, UPVC drain out pipe not exceeding 1.5 mtr length including necessary fitting/accessories as required at site complete all as specified and directed.

M&L for cutting and removing the corroded portion of the water cooler body (outer cover), any make and providing 3mm thick stainless steel sheet in corroded portion and fixing/rebetting/brazing with existing sheet including fixing of all accessories complete all as directed.

M&L for prepartion of surface and removing dents & spray painting to water cooler of any size and type/make with two coats of synthetic enamel paint over one coat of red oxide primer and writting SM/MES No. with back paint complete all as specified and as directed.

M&L in repairs, mild steel framework in stand for water cooler/ refrigerator/ desert cooler etc of suitable size as required, made out of mild steel sections such as 40mm x 40mm x 6mm/25mm x 25mm x 3mm mild steel angle iron & 40mm x 6mm mild steel flat iron, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and grouting into the wall/floor etc if required, complete all as specified and as directed.

S&F in repairs, door rubber gasket for water cooler of any type complete all as specified and as directed.

M&L in repairs, rewinding of fan motor suitable for water cooler of any capacity of any make with super enameled copper wire of existing size and weight as required including replacement of bushing and capacitor complete all as specified and as directed.

S&F in repairs, fan motor, 1/5 HP, 240 volts, single phase, AC supply, suitable for water cooler of any capacity all as specified and as directed.

Disconnecting electrical connection, dismantling the accessories carefully of air cooler/desert cooler of any type/make and transporting to workshop if required for repairs, cleaning the air filters and exposed surface and refixing the air cooler/ desert cooler in its original position after repairs and testing all as specified and as directed. Notes : (i) The parts to be replaced shall be of existing make. (ii) Parts shall be measured and paid separately as supply and fix in repair.

S&F in replacement of fan motor, 3 speed, single phase 230V AC supply, connecting and testing for desert cooler of any type and capacity all as specified and as directed.

S&F in repairs, water circulating pump motor 1/26 HP (Tullu pump) 230 V, single phase, 1440 RPM, suitable for any type of air cooler/desert cooler fixed complete all as specified and as directed.

S&F in repairs, dry grass pads (khas grass), 25 mm thick, fixed at three side of desert cooler complete all as specified and as directed.

M&L for prepartion of surface and removing dents & spray painting to air cooler/desert cooler of any size and type/make with two coats of synthetic enamel paint over one coat of red oxide primer and writting SM/MES No. with back paint complete all as specified and as directed.

S&F in repairs, desert cooler capacitor 4.0 mfd complete all as specified and as directed.

Dismantling the body of desert cooler of 1800/1400 cum/hr capacity by opening/cutting the nut/bolts and taking out old motor and pump for reuse, reassembling the complete desert cooler after repair work and making connection and testing complete all as specified and as directed. Note : Repair work shall be measured and paid separately.

M&L in repairs, old rusted water storage bottom of desert cooler of 1800/1400 cum/hr capacity, made out of 2mm thick mild steel sheet, duly painted with two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and as directed.

M&L in repairs, old rusted side panels of desert cooler of 1800/1400 cum/hr capacity, made out of 2mm thick mild steel sheet duly painted with two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and as directed.

M&L in repairs, old rusted front panel of desert cooler of 1800/1400 cum/hr capacity, made out of 2mm thick mild steel sheet duly painted with two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and as directed.

M&L in repairs/replacement of MS bracket with ring for fan motor including nuts & bolt for desert cooler of any type and capacity all as specified and as directed.

M&L in repairs, fan blade made of aluminium for desert cooler of any type and capacity all as specified and as directed.

M&L in repairs, fan blade made of plastic of superior quality for desert cooler of any type and capacity all as specified and as directed.

S&F in repairs, switch piano, flush type, 6 amp, 230V, AC, one way all as specified and as directed.

M&L in repairs, PVC water distributor with PVC elbow and pipe for desert cooler of any type and capacity all as specified and as directed. Note:- The unit rate quoted shall deemed to be included the cost of elbow - 03 Nos, pipe-03 Nos of required length and dia and distributor -01 No .

S&F in repairs, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc PVC pipe, 15mm dia, heavy duty all as specified and as directed.

S&F in repairs, 3 speed regulator switch for desert cooler complete all as specified and as directed.

S&F in repairs, mounting frame/ stand suitable for outdoor unit of split AC of any size complete all as required at site all as specified and as directed.

S&F in repairs, metalic plug top, 3 pin for AC point, single phase, 240 volts, AC, ISI marked, all as specified and as directed.

S&F in repairs, metalic socket, 3 pin for AC point, single phase, 240 volts, AC ISI marked all as specified and as directed.

S&F in repairs, commercial plywood, 4.0 mm thick, provided in existing window, upto double story bldg, including cutting of plywood to opening size of desert cooler/ window AC etc as required all as specified and as directed. Note : The area of plywood with external dimensions shall be measured for payment without any deductions for openings.

M&L for repairs to voltage stabilizer 1.0/2.0 KVA , single phase, 230V, 50Hz, any type, including replacement of rectifier, circuit board, relay, indicating lamps, volt meter and socket outlet etc and testing all as specified and as directed.

M&L for repairs to voltage stabilizer 3.0 KVA to 5.0 KVA , single phase, 230V, 50Hz, any type, including replacement of rectifier, circuit board, relay, indicating lamps, volt meter and socket outlet etc and testing all as specified and as directed.

S&F in repairs, sheet metal enclosure, single pole with two pin earth plug and socket with one single pole MCB, 10 Amps, 240 volts complete all as specified and as directed.

M&L in repairs, three core copper conductor cable, flexible of size 2.5 Sqmm for connections complete all as specified and as directed.

M&L in repairs, three core copper conductor cable, flexible of size 4 Sqmm for connections complete all as specified and as directed.

Supply only refrigeration gas F-22/R-22 (Mefron/Refron) in returnable cylinder complete all as specified and as directed

Supply only refrigeration gas R-134 (Mefron/Refron) in returnable cylinder complete all as specified and as directed

S&F in repairs, 15mm bore, gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, all as specified and as directed.

S&F in repairs, 20mm bore, gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, all as specified and as directed.

S&F in repairs, 25mm bore, gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, all as specified and as directed.

Disconnecting water and electrical connection, dismantling the accessories carefully of RO system of capacity 12 Ltrs, cleaning the exposed surface and refixing the same to its original position, connecting up of water/electric connections after repairs and testing all as specified and as directed. Note : (i) The parts to be replaced shall be of existing make. (ii) Parts will be measured and paid separately as supply and fix in repairs.

S&F in repairs, pre filter for 12 Ltr capacity RO system complete all as specified and as directed.

S&F in repairs, carbon block filter for 12 Ltrs capacity complete all as specified and directed.

S&F in repairs, UV filter for 12 Ltr capacity RO system complete all as specified and as directed.

S&F in repairs, membrance for 12 Ltr capacity RO system complete all as specified and as directed.

S&F in repairs, pressure pump for 12 Ltr capacity RO system complete all as specified and as directed.

S&F in repairs, 15 mm bore, galvanised iron pipes, medium grade with all fittings and fixed complete to walls and ceilings, laid in floors or laying in trenches complete all as specified and as directed

S&F in repairs 20 mm bore, galvanised iron pipes, medium grade with all fittings and fixed complete to walls and ceilings, laid in floors or laying in trenches complete all as specified and as directed

Supply, laying and testing 10 Sqmm, 2 Core, XLPE insulated, PVC sheathed cable, conforming to relevant IS, ISI marked, earthed system, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, in trenches/wall/floor/pole complete and making connection including suitable size aluminium lugs, including taking out existing cable and cable covers all as specified and as directed

Supply, laying and testing 25 Sqmm, 3.5 Core, XLPE, insulated, PVC sheathed cable, conforming to relevant IS, ISI marked, earthed system, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, in trenches/wall/floor/pole complete and making connection including suitable size aluminium lugs and taking out existing cable and cable covers all as specified and as directed

Supply, laying and testing 35 Sqmm, 3.5 Core, XLPE insulated, PVC sheathed cable, conforming to relevant IS, ISI marked, earthed system, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, in trenches/wall/floor/pole complete and making connection including suitable size aluminium lugs and taking out existing cable and cable covers all as specified and as directed

SONU ENTERPRISES

M/s. Gurudatt Electricals And Engineers, Aurangabad

Shri Sai Enterprises