Remaining Works of Miscellaneous Civil Works Outdoor Electrical Landscape at Jallandhar Circuit House Diu.

Civil Works :

Excavation for foundation upto 1.5m depthincluding sortingout and stacking of usefulmaterials and disposing of the excavated stuffupto 50 metre lead.(E) Hard rock

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(D) Soft rock not requiring Blasting.

Excavation for foundation from 1.5 m to 3.0 m depth including sorting out and stacking of useful materials and disposing of the excavated stuff upto 50 mt.lead (E) HARD ROCK

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth consoladating each deposited layer by ramming and watering.

Providing and laying cement concrete 1 : 2 : 4 ( 1 cement : 2 coarse sand :4 graded stone aggregate 40 mm nominal size) and curing complete including cost of formwork in complete. (A) foundation and plinth

M-25 Providing and laying controlled cement concrete M-250 and curing complete excluding the cost of form work and excluding reinforcement (B) For Slab (Grade slab,Basement slab,Ground floor,first floor,secound floor

Construction of 300 mm thick compacted granular sub grade (Grade -1, Crushed B T material of 53 mm to 26.5 mm @35%, 26.5 mm to 4.75 mm @ 45 %, below 2.36 mm @ 20%) by providing close graded material, mixing in a machanical mix plant at OMC carriage of mix material to work site, spreading uniform layers with motor grader on prepared surface and compacting in two layer of 150 mm thick each layer with vibratory power roller to achieve desire density, complete clause as per 401.

Steel work welded in built up sections framed work including cutting hoisting fixing in postion and applying a priming coat of red lead paint.(A)In beams and joists channels and angles, tees,flats with connecting cleats as in main and cross beams,hip and jack rafters connected to common rafters and the like. (for grill )

White Stone Bela mesonry block in course in superstructure with stone of approved quality in Lime Mortar 1 :5 (1- Cement :5- course sand) including packing the joints etc. complete. (more than 1 O ton)

Providing 20mm thick cement plaster in Sqm single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1 :3 ( 1-cement:3-sand)

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1 :3 (1-cement : 3- sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement 1-sand) etc. comolete.

Labour Charges edge finished for Granite

P and L 20 mm thick lather polish granite flooring over 20mm (average)base of cement mortar 1:4 (1- cement :4- coarse sand ) on new surface or fixing on existing flooring by adhesive material including dismantle of existing flooring and jointed with colour cement slurry including finished with flush pointing and cleaning the surface etc. complete for antiskit sira gray or equivelent (upto 10 ton)

Finishing wall with weather proof exterior sqm emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Providing and fixing shot blasted paver block of M 35 grade of Super / Vyara / Duracrete 60 mm thick to be fixed on cement mortar bedding 1 : 6 (1 cement : 6 coarse sand) including joint filled up with coloured cement to match the shade of tiles and colour (in different colour combination) complete as directed by architect

Washed Pabble stone plaster on exterior walls height up to 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 pabble stone 8 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings, sample make and approved with consultant complete as per specification and direction of Engineer-in- charge (payment for providing grooves shall be made separately).

Mains & Wires Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (general wiring + in street light) (a) with medium class Rigid PVC pipe and accessories (a) 2 wire 2.5 sq. mm

Fire Detection System SITC of UL Listed, Analogue Addressable Microprocessor based 2 loop fire alarm control panel expandable up to 4 loop capable of taking minimum 99 detectors and 99 devices per loop like MCP, Hooters, control modules, response indicators etc. and shall contain central processing unit, LCD Display up to 960 character as per the detailed specification complete with battery backup of 24 hours operation and 30 minutes alarm operation with battery charger and annunciator window etc. System shall have provision to integrate with life safety facilities. i.e. HVAC, PA Lift or elevator by providing NO/NC contacts and BMS compatibility shall be through MODBUS/Bacnet protocol. The Panel shall be UL Listed / FM Approved Make Morley,Siemens,Notifire,Apollo,Hochiki

SITC of Active Repeater panel with LCD display complete system function keys for programming and control like system reset, Alarm Acknowledge, Alarm Silence, Trouble Acknowledge etc. as per specification. UL Listed / FM Approved Make Morley,Siemens,Notifire,Apollo,Hochiki

SITC of Analog Addressable multi sensor detector with LED indication, electronic addressing, multiple sensitivity levels, pre-alarm option, non-volatile memory having provision for self diagnostics and history log, dust and dirt resistant with drift compensation, plug-in design, with compatible mounting bases, junction box and other accessories as required and working on 19 - 24 V DC supply all complete as required. The detectors shall be UL Listed / FM approved. Make Morley,Siemens,Notifire,Apollo,Hochiki

SITC of Analog Addressable Photo-electric type, smoke detector with Bi-color LED indication, electronic addressing, multiple sensitivity levels, pre-alarm option, non-volatile memory having provision for self diagnostics and history log, dust and dirt resistant with drift compensation, plug-in design, with compatible mounting bases, junction box and other accessories as required and working on 19 - 24 V DC supply all complete as required. The detectors shall be UL Listed / FM approved. Make Morley,Siemens,Notifire,Apollo,Hochiki

SITC of Analog Addressable Heat detector with operating temperature of 57 Deg C & 9 Deg C rate of rise of temperature, with Bi-color LED indication, electronic addressing, multiple sensitivity levels, pre-alarm option, non-volatile memory having provision for self diagnostics and history log, dust and dirt resistant with drift compensation, plug-in design, with compatible mounting bases, junction box and other accessories as required and working on 19 - 24 V DC supply all complete as required. The detectors shall be UL Listed / FM approved. Make Morley,Siemens,Notifire,Apollo,Hochiki

Supply, installation, testing & Commissioning of Addressable Manual call points. The same shall be of ABS plastic, square in shape and 4 "x 4" in size. It shall have a "Break glass" message embedded on the glass. The addressable module shall be enclosed along with the break glass in a junction box. Make Morley,Siemens,Notifire,Apollo,Hochiki

Supply, installation, testing & Commissioning of Addressable strobe cum sounder. The strobe cum sounder shall be made of ABS plastic and have the Db level of 90dbs and a multi tone facility. The addressable control Module shall be fitted in a junction box. Make Morley,Siemens,Notifire,Apollo,Hochiki

Beam Detector Addressable loop powered beamdetector, 10-100m range, 4 fixed sensitivity levels, 2 automatic variable sensitivity modes, Numerical indicators to aid Beam alignment, Standby, Fault and Alarm LED indicator, Automatic Drift compensation, Complies to EN54-12, LPCB Approved Make Morley,Siemens,Notifire,Apollo,Hochiki

Supply, installation, testing & Commissioning Addressable Fault isolator modules Make Morley,Siemens,Notifire,Apollo,Hochiki

Supply, installation, testing & Commissioning of Battery pack suitable for back up of 4 hours with charger in case of Alarm condition.

Supply, installation, testing & Commissioning of response indicator Make Morley,Siemens,Notifire,Apollo,Hochiki

Supply, installation, testing & Commissioning of 2c x 1.5 Sq.mm FRLS Unarmored cable Make Polycab,Avocab,Finolex

Supplying & erecting Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots, Inbuilt Auto attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / E1 & VOIP program me through Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialling facility, QSIG protocol on PRI, 95 / STD / ISD / Local- Locking ,Class of Service, Quick Dial- Single Digit dialling of any two external numbers, Once only ring device, Boss/Secretary- Do not Disturb Facility, Power Down Mode, Hot Line, Hot Outward Dialling, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing. With Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF,CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most Calculation(ASMDR), DID Direct Inverse Dialling, External Music Input, Fax Homing, Global Directory Printing. with following capacities [D] No. Extension - 64 , No. of Junction -18 , No. of expandable ports -222 , Operator Console 01 - Compatible - ISDN and Networking Make NIC Or Equivelant

Supplying & erecting push button type telephone instrument having speaker phone Caller ID & hands free dialling system & 30 memories with display system (a) Single line BPL / SONY/ BEETEL,Panasonic or equivalent make

Supplying & erecting Panasonic / SONY or equivalent make push button type Two way Cord Less telephone instrument Speaker Phone having feather light key pad 30 days standby battery life, hands free speaker phone, 19 station speed dialler, inter com with 2 way paging & lock key one touch dialler.

Float cum boost Charges for EPABX System with C] Current Rating - 25A, Voltage Rating - 48 V

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm (a) Unarmoured 6) Twenty Pairs Make Polycab,Finolex,RR

Dlink 24-Port Managed Gigabit Stackable Switch including Combo SFP ports, 10/100/1000BASE-T ports (RJ45), Gigabit Combo ports (RJ45/SFP)

Dlink 24 Port Patch Panel With Cable Management bar for improved management Accepts Cat5e+ and Cat6 keystone Jacks Mounts in standard 19 inch racks

SITC of OM2 Duplex patch cord SC-LC 2Mtr. make of Legrand cat. No. 033063

SITC of OM2 Duplex patch cord SC-LC 3Mtr. make of Legrand cat. No. 033076

Supply, Installation, Testing & Commissioning of Single Port face Plate, Information Outlet & Back Box

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [D] CAT - 6 Make Finolex,D-link,Polycab

Dlink 15U Wall Mount Rack with Accessories

Dlink 22U Rack with Accessories for Networking

Dlink 9U Wall Mount Rack with Accessories

Supply, Installation, Testing & Commissioning of 64 CH IP Network Video Recorder, Dual-OS design, Upto 12MP Recording, H.264+, 02-HDMI / 02-VGA Output. 16 CH Synchronous Playback, 8 SATA Interfaces (6TB Each), Raid0, Raid1, Raid5, Raid10 Support, 1 eSATA, 02-10/100/1000Mbps Network Interfaces, 3xUSB, Alarm I/O 16/4.. Recording for 15 days @720P X 15 FPS . Make UNV,Honeywell,Hi-Focus,Hochiki,Apollo

Supply, Installation, Testing & Commissioning of IP IR Vari Focal 2MP IR Mini-Bullet Network Camera,1/2.7” 2Megapixel progressive CMOS· H.265+ & H.265 dual-stream encoding· 25/30fps@1080P(1920×1080)· DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC· Multiple network monitoring: Web viewer, CMS(DSS/PSS) & DMSS· 2.8~12mm varifocal lens· Max IR LEDs Length 40m· Micro SD card memory, IP67, PoE Make UNV,Honeywell,Hi-Focus,Hochiki,Apollo

Supply, Installation, Testing & Commissioning of IP IR Vari Focal 1/2.7” 2Megapixel progressive Dome Camera CMOS· H.265+ & H.265 dual-stream encoding· 25/30fps@1080P(1920×1080)· DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC· Multiple network monitoring: Web viewer, CMS(DSS/PSS) & DMSS· 2.8~12mm varifocal lens· Max IR LEDs Length 30m· Micro SD card memory, IP67, PoE 12532 Make UNV,Honeywell,Hi-Focus,Hochiki,Apollo

Supply, Installation, Testing & Commissioning of PTZ Camera 1/2.8” 2Megapixel STARVIS™ CMOS· Powerful 30x optical zoom· Starlight technology· Max. 50/60fps@1080P· Auto-tracking and IVS· IR distance up to 200m· Support PoE+· IP67, IK10 Make UNV,Honeywell,Hi-Focus,Hochiki,Apollo

Supply, Installation, Testing & Commissioning of 55" Professional Display with HDMI Cable of 30 mtr. Sony,Sumsung,LG,Panasonic

Supply, Installation, Testing & Commissioning of 16+2 Port POE Network Switch, Network Protocol and Standard IEEE 802.3i,IEEE 802.3u,IEEE 802.3x IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at Port 16 10/100Mbps RJ45 port 2 10/1000Mbps RJ45 port 2 Gigabite SFP port PoE 16 10/100Mbps RJ45 port support PoE Max power 150W Single port max 30W Indicator 18 Link/Act LEDs 16 POE LEDs, Store-and-Forward Switch Volume(Full-duplex):7.2Gbps Packet forwarding rate:5.36Mbps Input power 100-240V/50-60Hz Make D-link,Cisco,Netgear

Supply, Installation, Testing & Commissioning of Wheather Proof Protection Box 85 x 85

Supply, Installation, Testing & Commissioning of 6 TB Surveillance Hard Disk. Make WD,Segate,HP

Supply, Installation, Testing & Commissioning of OnLine Interactive UPS 1 KVA Microprocessor control, Built-in automatic voltage regulator(AVR), Extended battery run-time Cold stary capability, Smart battery management, Generator compatibility, LCD/LED display, Off mode charging Inverter Efficiency: >72%, Input Voltage: 230V, DC Voltage: 12 V, Output Waveform Type: Stepped Sinewave, Ingress Protection: IP 20, Operating Temperature: 0 - 40 ° C, Output Connection: 1W+N+G Make Numeric,Arrow Power,APC,Emesion,Kesara,Suvik

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed. Cat III CG,Orient,Bajaj,Hawells

Supply and installation of 6 W ceiling loudspeaker, suitable for 100 V connection with power tapping of: 6, 3 and 1.5 Watt. It is a full range loudspeaker for speech and music,complete as per the detail technical specification and as per the instruction of site Engineer. Make Bosch,Ahuja,Honeywell,Bose,Workpro,Mpro

Supply and installation of 6 W Wall Mount loudspeaker, suitable for 100 V connection with power tapping of: 6, 3 and 1.5 Watt. It is a full range loudspeaker for speech and music,complete as per the detail technical specification and as per the instruction of site Engineer. Make Bosch,Ahuja,Honeywell,Bose,Workpro,Mpro

Supply and installation of Master controller,each connected router shall have 12 trigger inputs,24Vdc output shall be available to supply power to external relays, business call and BGM audio, up to 60 zones, 8 call stations and two remote control panels,complete as per the detail technical specification and as per the instruction of site Engineer. Make Bosch,Ahuja,Honeywell,Bose,Workpro,Mpro

Supply and installation of 480 W Booster Amplifier having frequency range 60hz to 15Khz and distortion <1%,operations 230v AC and 24VDC,complete as per the detail technical specification and as per the instruction of site Engineer.480 Watt PLENA Booster Amplifier Make Bosch,Ahuja,Honeywell,Bose,Workpro,Mpro

Supply and installation of 240W Booster Amplifier having frequency range 60hz to 15Khz and distortion <1%,operations 230v AC and 24VDC,complete as per the detail technical specification and as per the instruction of site Engineer. Make Bosch,Ahuja,Honeywell,Bose,Workpro,Mpro

Supply and installation of CD player,Disc playback modes,USB Directplaybackmodes,Tuner/Reception/Transmission,Connectivity USB. complete as per the detail technical specification and as per the instruction of site Engineer. Make Bosch,Ahuja,Honeywell,Bose,Workpro,Mpro

Supplying, installing, testing and commissioning of 2 core 1.5 sq mm armored Sheilded twin twisted cores cables with 25mm PVC Conduit ISI Mark with annealed tinned copper (ATC) conductor having Cross linkable Low smoke zero halogen insulation and LSZH inner and outer sheath Armored cables as per standards. Cables shall be estimated per Speaker basis as per the drawings. The quoted rate shall be inclusive of suitable saddles, hardware, junction boxes etc. complete as per specifcation. Make Avocab,Polycab,Finolex

1 Year Comprahensive service warrenty of CCTV System, Fire Alerm System,PA System,Networking, Epbax System.

BU BOX.(1-5) / ELECTRONIC EXPANSION VALVE.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (D) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (D) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (D) 4 core 6 Sq. mm

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (A) 6 to 32/63 Amp. Cat-III

Mains & Wires Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (general wiring + in street light) (a) with medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm

Supply and Laying of Earth wire for Outdoor JB 1 wire 6sqmm Pvc Copper Flexible FRLS Wire with Copper Lugging .

SITC FP MCB Enclosure of IP65 Water Tight Junction Box with 63AFP MCB With necessary clamp for mounting of the J.B. J. B. Should be provided with cable Connectors + IP65 Glands + IP65 Grommets. connectors to connect 2 nos. of 6/10 sq. mm. x 4 core cables+ Earthing wires. of Legrand,Schineider,Hensel make

Supply and fixing of perforated type Galvanized GI cable trays of the following sizes Of Wide 200 mm x 50 mm Including Required Fixing Material Like Fastners,Bullet, Rod Etc..

Dismantal of Piping & wiring and doing Zari work , RePiping & Rewiring and Doing Plaster work on zari work .

Dismantal of Concealed Box & Reinstallation of Concealed box with Zari work and Plaster work for Finishing work

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections. 2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs. 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators with alarm Load on generator. 5) Indicators Load on mains Engine fails to start . Emergency stop battery charger. The AMF Panel of following capacity (D) AMF Control Panel for 380 KVA3 phase DG Set

Supplying and erecting Acoustic enclosure (canopy) made out of 18 SWG, CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 The resin bonded Rockwool covered from inside level not more than 75 dB at a distance of 1 mtr, as PVCT norms , on provided foundation suitable for following size of DG Set. The enclosures for following capacity of DG sets. For 380 KVA

Supplying,Erecting, Testing & Commisioning of Compact Secondary Substation Comprising of 3 way 11KV SF6 Type RMU (Motorized) with Two Isolating Switches 630A with 630KVA, 11/0.415KV, Copper Wound, 2 Winding, 3 Phase, Oil Filled Transformer with Cable Box On HV & LV Side with Relavent is & as Per Technical Specification. LT Panel Shall Have One Incomer 1250A, 4 Pole Manually Operated Air Circuit Breaker with 4 Nos. O/G of Adequate Capacity as Define in the Technical Specification with Transformer Support Channel of Size 125x65mm and Support System For Supporting Cables.

Providing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from Electric shock

Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply.

Supplying rubber matting of 12 mm thickness as per IS 5424 and of required length and breadth with good insulation property for 22 KV

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall hook.

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of approved enamelled silver paint.

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes)

Providing and erecting cable end terminatation kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable for 11 KV XLPE cable 3core 95 & 120 Sq.mm - 185 sq.mm (A) Outdoor type

Providing and erecting cable end terminatation kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable for 11 KV XLPE cable 3core 95 & 120 Sq.mm - 185 sq.mm (B) Indoor Type

Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off, inner sheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments. 3 Core 185 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge, sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lengthwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Engineer-in-charge. (D) 100 mm dia.

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. [B] For 6.5 KG Capacity

Supplying and erecting enamelled iron GI sheet 1.25mm (18 gauge) Caution boards/Danger boards with signages of size 200mm x 150mm as per IS 2551 of 1982 in approved language viz. English, Hindi as approved by Engineer Incharge erected at directed position.

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. [C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc.. -Length of Pipe : 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg. For DG Body & Neautral, Transformer Neautral & Body, Circuit Braker ,LA, and All Panels

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable for safe earthing device.

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp.

Supplying & erecting funnel type earthing having earth plate of following size burred in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following specification (C) with 60 x 60x 0.315 cms. Copper earth Plate

Providing & laying. Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II ) Anti Rodent type with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and backfilling the same to make ground as per original. (A)50 mm dia

Providing & laying. Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II ) Anti Rodent type with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and backfilling the same to make ground as per original.(B)90 mm dia

Providing & laying. Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II ) Anti Rodent type with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and backfilling the same to make ground as per original.(C)120 mm dia.

Providing and fixing Decorative Outdoor Light Fixture fitting The product will be robust and with high quality finish IP 65/67 fitting . The rates will include LED light fixtures of minimum 10 to 40W. The contractor will have to get the product specifications approved from the Consultant/Engineer Incharge and than approve the product on site or at the office of the U.T. at Daman.

Providing and fixing Decorative Indoor Light Fixture fitting The product will be robust and with high quality finish. The rates will include LED light fixtures of minimum 30W. The contractor will have to get the product specifications approved from the Consultant/Engineer Incharge and than approve the product on site or at the office of the U.T. at Daman.

Providing and fixing Garden Bollard Lights in Aluminium body- IP 65/67 fitting. The product will be robust and with high quality finish. The rates will include LED light fixtures of minimum 8W. The rates will include the junction box for connection to the main supply on theBollard. The contractor will have to get the product specifications approved from the Consultant/Engineer Incharge and than approve the product on site or at the office of the U.T. at Daman.

Providing and fixing Decorative Outdoor Light Fixture fitting The product will be robust and with high quality finish IP 65/67 fitting . The rates will include LED light fixtures of minimum 40W. The contractor will have to get the product specifications approved from the Consultant/Engineer Incharge and than approve the product on site or at the office of the U.T. at Daman.

Providing and fixing Decorative Garden Light poles with Light FIxture in Aluminium or FRP body- IP 65/67 fitting The product will be robust and with high quality finish. The rates will include LED light fixtures of minimum 25W. The rates will include the junction box for connection to the main supply on the pole. The contractor will have to get the product specifications approved from the Consultant/Engineer Incharge and than approve the product on site or at the office of the U.T. at Daman.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (E) LED Strip Light (b) Minimum 4.8W per meter,(2 wire, IP-65) with Driver complete Cat III.

Supply,installation,testing & commissioning outdoor control pillar 415V ,3 phase,50 Hz with neutral bus fabricated from 14 SWG MS sheet with appropriate size supporting angle complete with 7 Tank processing and powder coating. main incomer 250A,4P,MCCB,ESCO , Make ATS-250A 300 Series, Load manger of Schneider Make PM210, Tinned Copper Busbars, CT 250/5A 100A contactor timer & 6nos. of 63A FP MCB ,6 Nos 32A FP MCB 06 nos 25A DP MCB for distribution.The job includes complete internal wiring 2 nos of earth studs on panel.The panel shall be IP65 with panel type locking arrangement.Further the job includes installation of pillar by providing cement concrete foundation with height 450mm above gnd level complete with excavation,plastering,curing painting,installation etc..

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (J) 3 1/2 core 400 Sq.mm ( 185 Sq. mm 1/2 core)

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size not exceeding 400 sq.mm direct in the existing DWC Pipe , etc. complete as required.

Clearing site Clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Surface dressing of ground Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. In all kind of soil

Bed/plot preparation Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm,refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).

Supplying and stacking of good earth(averge 60 cm filling) at site including royalty and carriage complete (earth measured in stacks will be reduced bv 20% for payment)

Cow Dung Manure Supplying and stacking of well decayed cow dung manure at site including and carriage complete (Cow dung manure measured in stacks will reduced bv 8% for Pavment).

Vermi compost Supplying and stacking of good quality vermi compst at site of "Brown Gold" make or equalent including and carriage complete. Dose : 1 bag of 50 kg in 1000 sqft of area

DAP Fertilizer (basic dose) Supplying DAP fertilizr on site FOR delivery. Dose : 1 bag of 50 kg in 3000 sqft of area

UREA Fertilizer Supplying UREA fertilizr on site FOR delivery. Dose : 1 bag of 50 kg in 20000 sqft of area

Providing Labour for dressing and spreading of cow dung manure and DAP with soil and leveling for plantation of lawn @ distance of 15cm by 15cm, rolling by light roller, water irrigation. Maintanance up to 90 days after completion of lawn plantation. (including weeding,watering,spreading,Termite treatment,gap filling,Lawn mowing in time etc complete)

Ixora mini-pink

Red bhaji broad leaf

Ixora hyb.-red

Ixora hyb.-pink

Fiscus panda small

Nikadevia

Accalypha red

Golden fiscus

Fiscus kingbush

Fiscus Traingular small

Fiscus safari small

Bouganvillia Torch glory

Ixora pink mini

Bouganvillia Thima

Agave Geminifolia

Accalypha jawa

Night queen

Kamini

Day king

Wall creepers

Clededron enermi

Red roses

Golden Dhurrenta

Ticoma Gavdichavdi

Trees list Bismarkia palm

Coconut west coast tall

Terminalia green

Terminalia red

Terminalia verigated

Royal palm

Areca palm

Pride of india

Tabebuia rosea

Lagestromia Thorolli

Bottle brush

Sita Ashok

conocarpeus

Black fiscus hedges

Champo-white

Champo-red

Champo-pink

Foxtail palm

Desi Neem

tabubia Rosea

Desi Asopalav

Kitchen Garden chilles

valor papdi

brinjal

advina pan

Dhania

Garlic

Tometo

Methi

Tulsi

PLANTATION LABOUR Providing labour for planting below listed plants/shrubbery/trees with following detailed sequence/specs. 1) Making pit of 60x60x60 cm deep for tree & 20x20x20 cm,25x25x25 cm & 30x30x30 cm for shrubs as per instructed by landscape consultant. 2) mixing Farm Yard manure (FYM) with soil into pit, Dose as per instructed by consultant. 3) Making Termite treatment with proper mixing of soil within pit ,Dose as per instructed by Consultant. 4) Placing sapeling in centre of pit with support of bamboo above ground as per instructed by consultant. 5) Throughly mixing & pressing of soil in pit with proper "Khamna" & watering as per instructed by consultant. with maintainance upto 90 days after completion of plantation job. White grass

Ixora mini-pink

Red bhaji broad leaf

Ixora hyb.-red

Ixora hyb.-pink

Fiscus panda small

Nikadevia

Accalypha red

Golden fiscus

Fiscus kingbush

Fiscus Traingular small

Fiscus safari small

Bouganvillia Torch glory

Ixora pink mini

Bouganvillia Thima

Agave Geminifolia

Accalypha jawa

Night queen

Kamini

Day king

Wall creepers

Clededron enermi

Red roses

Golden Dhurrenta

Ticoma Gavdichavdi

Trees list Bismarkia palm

Coconut west coast tall

Terminalia green

Terminalia red

Terminalia verigated

Royal palm

Areca palm

Pride of india

Tabebuia rosea

Lagestromia Thorolli

Bottle brush

Sita Ashok

conocarpeus

Black fiscus hedges

Champo-white

Champo-red

Champo-pink

Foxtail palm

Desi Neem

tabubia Rosea

Desi Asopalav

Kitchen Garden chilles

valor papdi

brinjal

advina pan

Dhania

Garlic

Tometo

Methi

Tulsi

Providing & installing big "Stone Boulders" using hydra on site as landscape element with following size as location suggested by consultant 5 Tonne (approx. 1.2 m x 1.8 mt high )

7 tonne (approx.1.8 mx2.4 m)

9 tonne (approx.3 m x 4.5 m)

Landscape works : Hardscape Providing & fixing of White River (Stone) Pables size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.

Providing and constructing stone cladding on fountain front wall as detailed drawing at all depths heights, and leads and as directed by EIC

Landscape works : Art & Sculpture Terracota Relief Panel 20 sqmt Designing, Providing & fixing art relief work in 50 mm thick terracota panel with 1x1 mt grid having overall size up to 20 smt panel with following specifications. First Theme should be developed by artist alongwith consultant on Diu local architecture, & cultural ( Folk Dance, temples, traditional male female dress, colorful dhol, folk art) to the art work. Approve this theme to Authority & make prototype of the same. The cost will include materials like claywork, firing,labour & supervision. First piece should be supervised by consultant in to workshop & upto his satisfaction it will be proceed further. The cost will include transportation in temperproof & shockproof packing to site. It is vendor responsbility of art wotk damage until installation. Art panel to fixed on RCC surface with special cement adhesive (kerakol company) including scafollding,finishing etc with final fixing etc complete as per EIC. The cost will also include spraying PU coating on final installed art panel.

Landscape works : Misscelenous RCC Garden Bench Providing & fixing precast RCC Garden bench with following specs. Seating length of bench : 1350 mm, Base width : 620 mm, Front height : 450 mm, Back height : 1000 mm Size of 7 no reinforced concrete plank : 1350x100x50 mm with terracota red colour painted All components are manufactured by using M-30 grade of concrete using vibro compaction process. All parts are joined togather with galvanized nuts & bolts of suitable size and all bolts are sealed after assembly. Bench top and back planks are treated with special anti-corrosive,waterproof coating so as to make surfaces glossy and waterproof.

Water cascade fountain (1.2 m wide) Providing & installing water cascade fountain as per following specification All connecting plumbing line/accesaries 1 mt SS tube fixed in wall SS water collection tube-5'x2'x2' Submersible pump set 11Hp (prima make ) Electrical panel led light controller Outdoor Penal 12w water Proof LED Light Warm white 1.5 sq mm 4-core cable flexible 2.5 sq mm Flat cable flexible including Transportin and insttlation charge & all taxes

Landscape works : Services PVC Pipes CPVC Pipe SOR 13.5 - 40 mm daimeter

CPVC Pipe SOR 13.5 - 50 mm daimeter

PVC SWR pipes IS 13592 for Drain - 75 MM diameter

Sprinklers,Valves & Assesories Pop Up 3 to 4.5 mtr Radius with 1804 Spray Head

Swing Joint 1/2"

P.P. Clamp Saddle 1/2"

PVC Ball Valve 50mm

Hydrent- 3/4"Brass Body

Hydrent Opener & Key- 3/4"

Valve Box 6" - Round, Heavy Duty

P.P. Clamp Saddle 3/4" - Hydrent

Drip and Assesories Drip Lateral, Plain 16mmx4kg - Brown

Emmitting Drip Line 16mm,3.4LPH,50cm- Brown

Gromet & Take off 17 mm

Ring Joiners 17mm

Tee/Elbow 17 mm

Dripper 4 LPH, PC

Flush Valve 40mm

Lateral Hold Stake ( GI Coated)

Head Unit Isolation Valves 63mm

Double Acting Air Release Valve 1"

P.P. Clamp Saddle 1" - for ARV

Valve Box 6" - Round, Heavy Duty

3" Disc Filter

Pressure Gauge-Glyserene filled

Pressure Relief Valve 2"

Non Return Valve 2"

Submersible Pump - 3 Lps @ 45 Mtr Head, Three Phase - Stainless Steel Body,Vertical Multistage with Starter Panel

Pressure Switch & Panel

PVC Fittings & Accessories

Automation work For Irrigation Automation Controller 18 Station (ESP LXME) with Additional Modules

Solenoid Valve 1 1/2" with 12" Rectangular Heavy Duty Valve Box

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-incharge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).

Fabricated work: Providing Fabrication & erection of structure steel structure as per drawings including materials, consisting of plates, rolled steel joists, channels, angles, chequered plates etc and also rectangular / square hollow steel sections, insert plates in RCC/Brickwork, anchor bolts for steel structure, sleeve pipes, anchor nuts, washers etc, straightening of raw steel if required, fabrication of steel structures with primer and minimum two coats of anti corrosive paint, incuding Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. including preparation of supplementary sketches and detailed bill of materials supply of bolts, nuts, washers, shims, packs, putty. gas, welding electrodes and all other consumables, as required and carrying out surface preparation all complete. The scope includes loading, transportation ,unloading and delivery and erection site of all fabricated structures, alignment and welding of all structures true to line, level, plumb and dimension, including rectification if any, splicing, site assembly all as per technical specifications and drawings, ,all complete . Contactor shall provide certificate for the fabrication structure. Rate inclusive of shop drawing.

Providing anf fixing multicell polycarbonate sheet of minimum thickness 10 mm with 3 cell 4 wall having wall flenge and supporting wall thickness as per manufaturer specification extruded translucent panel with vertical standing seam at both side of ther panel with snap on connector to intyerlock the panels with a single/double tooth greep/lock mechanisum to ensure maximum uplift capacity including end cap/ alluminium U profile (Mill finish) for end panel shall be coexetruded both side UV protected with antiglare colour to Prevent glare. The panel shall be fixed to pre installed structural MS frame work (MS structure shall be paid saperatly in relavent Item) and be secured with snap on connector at all level including all accesaries like screw, washer , flashing, trims etc.. complete as desired including transportation lift scaffloding etc.conforming to specification and direction of Engg. In charge.

Providing TMT Bar FE 500/5000 reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton)

Providng and laying of expansion joint polyurethane sealent treatment in the expansion joint including cleaning the joint as per direction of EIC. (50 mm width *25 mm deep)

providing and appliying acrylic textured plaster of 2mm thickness of approved shade and finishing with trowel finish/ gun spray finish by mechanical means (compressor ) consisting of 1st coat of exterior cement primer , 2nd coat of acrylic plaster required shade , pattern etc. complete as per manufacturers specifications & directions of engineer in charge . rates quoted to include all the patterns as directed including preparing the base surface, attanding to broken edges , corners or patches of plastered surface and filling with cementitious grout , scaffolding , staging , cleaning the surface etc. complete as directed by Engineer in charge . (The backing coat plaster will be paid under separate item)

Krishna Buildspace Pvt.Ltd.