Stock Storage under JSV Division Jubbal in Tehsil Jubbal Distt Shimla HP

Amount

Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in R.S. Joists, channels, angles, tees etc. with in all leads and lifts as directed by the Engineer Incharge

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/softs/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)

Providing and fixing of corrugated pre painted G.l Sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8mm diameter with bitumen and G.I. Limpet washers filled with white lead complete excluding the cost of purlins refters and trusses. 0.63mm thick sheet.

Providing and fixing of bulk head light for new office building with in all leads and lifts.

Providing an fixing of door closer (Heavy duty) with in all leads and lifts.

Providing an fixing of door stopper with in all leads and lifts.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. onnection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

3 ltrs cap

25 ltrs cap

Painting two coats (excluding priming coat) of approved make on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter complete in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge.With readymixed paint other than white.

Providing and fixing following anodized stainless steel fittings of anodized transparent and shade with necessary screw etc.complete

Sliding door bolts 200x16mm.

M.S. tower bolts (Barrel type) leads and lifts. 200x10mm.

M.S. tower bolts (Barrel type) leads and lifts. 150x10mm.

M.S. handles 125mm dia

M.S. handles 100mm dia

Providing and fixing vitreous China wash down water closet (European type. W.C. Pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1Cement : 1 Sand) (Seat and cover to be measured and paid for separately) Ordinary type.

Prorviding and fixing vitreous china wash basin with single hole for piller tap with C.I. or M.S. brackets painted white Flat back 550mmx400mm within all leads and lifts and as directed by the Engineer-in-charge.including cutting holes and making good the same but excluding fittings:-with in all leads and lifts as per the directions of the Engineer in charge.

P/F C.P. Brass Bib tap with capstan head(15mm dia) with in all leads and lifts as per the directions of the Engineer in charge.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement: 3 sand) jointed with cement slurry mixed with pigment to match the shade. of tiles as required complete.

10 mm Cement plaster in single coat on the fair side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth.complete in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge. In cement mortar 1:4 (1 cement: 4 sand)

Providing and fixing PVC Water tank 1000 Ltrs Premium Quality Tripple layer of Jai Bharat/ Sintex/ Diplast/ ISI mark with Inlet and outlet arrangement complete in all respect as per direction of Engineer-in-Charge with in all leads and lifts.

Wiring for light point/fan point/exhaust fan/call bell point with 1.5 Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. with in all leads and lifts as per direction of the Engineer-in-Charge. Group A.

Wiring for power plug with 2x4 Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke sinige core (flexible) copper conductor cable in PVC casing & capping along with 1 No. 4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.with in all leads and lifts as per direction of the Engineer-in-Charge. Group

Wiring for power plug with 4x4 Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke sinige core (flexible) copper conductor cable in PVC casing & capping along with 2 No. 4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.with in all leads and lifts as per direction of the Engineer-in-Charge. Group

Wiring for circuit/sub-main with following size PVC insulated heat resistant lame retardant (HIRFR) and low smoke sinige core (flexible) copper conductor cable in PVC casing & capping along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

2x1.5 Sq.mm.

2x10 Sq.mm.

Supplying & fixing metal box of following sizes (nominal size) on surface or in recess suitable for fixing phenolic aminated sheet cover in front including painting etc. as required:-

100mm. 100mm.x60mm. Deep

180mm.x100mm.x60mm. Deep

200mm.x150mm.x75mm. Deep

250mm.x300mm.x100mm. Deep

Supplying and fixing following rating Piano-type switch/socket on the existing switch box/cover including connections etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

S.P. 5/6 Amps one way switch, piano type.

S.P. 15/16 Amps one way switch, porcelain base/paino type.

5 pn 5/6 Amps socket outlet, poreclain base/piano type.

6 pin 15/16 Amps socket outlet, porcelain base/piano type.

Supplying and fixing bakelite batten/angle holder including connections etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Supplying and erection of 6 amps, to 32 amps, rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge. Single pole. Cat-A

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge. 40 Amps.

Supplying and fixing of following way, single pole and netural sheet steel MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels inter-connections phosphatized and powder painted, including earthing etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge. Single door-6 way

Earthing with G.I. earth pipe 4.5mtr. Long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Extra for using salt and charcoal for pipe earth eletrode complete as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. Below ground level for earth electrode conductor, including soldering etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing sleek and decorative strip type fixture with domestic electronic ballast and colored engineering plastic end plates, suitable for 28 watt FTL (TS), complete with all accessoris (excluding the T-8 tube), connections, testing and commissioning etc. as required. 1x 28 watt-FTL (TS) (Category-A with in all leads and lifts as per direction of the Engineer-in-

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Supplying and fixing Ding-Dong/Electronic musical bell, suitable for D.C./A.C. single phase, 230 volts complete as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing laying and fixing of one No. aluminuim conductor, PVC insulated and PVC sheathed, armoured/LPE power cable, working voltage 1100 volts grade on surface etc. of the required size. Armoured cable 4 sq. m (twin core) with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing of following sizes of PVC casing and capping on surface as required:-

Providing and fixing PVC Water tank 1000 Ltrs Premium Quality Tripple layer of Jai Bharat/ Sintex/ Diplast/ ISI mark with Inlet and outlet arrangement complete in all respect as per direction of Engineer-in-Charge with in all leads and lifts.

Laxman Singh (BID ID -529338)

AJAY KUMAR (BID ID -529353)