8215 PROVN OF TOILET URINALS AND WASHBASIN IN TRG AREA BLDG NO P 95 TRAINING SHED AT AIPT PROVN OF FLOORING WITH TILES IN NISHAN HUT NO T 30 AND PROVN OF HARD STANDING FOR EW SPECIAL VEHICLES AT 13 EW BN UNDER GE CENTRAL PUNE

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete and removing rubbish off the premises complete all as directed.

Rough excavation n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / disintegrated rock complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard/ dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting in out hard/ dense soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material exc 1.5 km but n exc 5.0 km and depositing outside of Mod land complete all as specified and directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L of hardcore of guage exc 63mmbut n exc. 100 mm, deposited,spread and levelled in layersn exc. 15 cm thick with broken stone or boulder, watered and rolled/rammed to a true surface complete all as specified and directed.

M & L for sand filling under floor including watering and consolidation complete all as specified and directed.

M & L for plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and directed.

M & L RCC (1:1.5:3) (nominal mix) type A1 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

All as per item No 11 here-in-before but in chajjas.

All as per item No 11 here-in-before but in lintel, beam etc.

All as per item No 11 here-in-before but slab supported on walls complete all as specified and directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.

M & L for precast cement concrete block masonry not exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-4 and setting in CM 1:4 complete all as specified and directed.

M & L for 40mm thick damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4 type B-0 mixed with WPC as per manufacturer’s instructions including necessary formwork complete all as specified and directed. Note : WPC shall be measured and paid separately.

Cutting chases, pinning in making good to facings where required and pointing in CM 1:4 for consealed water tubing etc complete all as specifed and directed.

Use and waste of formwork to roof beams, lintels and soffits of roof projections etc and similar items including edges complete all as specified and directed.

All as per item No 19 here-in-before but to sides of footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.

All as per item No 19 here-in-before but to chajjas and similar items including edges complete all as specified and directed.

All as per item No 19 here-in-before but soffits of suspended slab etc complete all as specified and directed.

All as per item No 19 here-in-before in before but to edges of concrete flats, floors roofs n exc 20cm wide

S & F 40 mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both sides complete all as specified directed by Engr-in-Charge.

S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guage complete all as shown in drg and specifed.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg and specified.

S & F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F aluminium anodised handles, fabricated type of size 150 mm complete all as specified and directed.

S & F aluminium alloy sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm complete all as specified and directed.

S & F aluminium (die cast) body door closer hydraulically regulated desingnation No 2, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg all as specified and directed.

S & F ventilators / louvers using 5 mm thick x 10 cm wide frosted glass strips inside & stainless steel wire cloth 0.36 mm dia and 1.18 mm width of aperture from outside using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as specified & as directed :- (a) SP- 20048, (b) Glazing clips - 19352

S & F pressed steel door frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate including filling with PCC (1:3:6) type C1complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 all as specified and directed.

S & F roof trusses (framed), trussed, purlins, rails fastenings and heavy bracket framing incuding distance pieces, eleats etc confirming to Fe 410-W or Fe 310W (grade E-250) quality A complete all as specified and directed.

S & F plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes without any attachment conforming to Fe-410W (grade E-250) quality 'A' complete all as specified and directed.

M & L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.

All as per item No 37 here-in-before but 8 to 10mm dia as in stirrups spacers and binders.

M & L for 09 mm thick Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 mm in size, of approved brand/make, laid over and including aluminium anodised (powder coated) snap grid frame work of size not less then 600 x 600mm hung from ceiling using 4mm GI suspension wire spaced at 1200 c/c on main runners including making niches for fan light all as specified and directed

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M & L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M & L for 75mm thick Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in plinth protection/paving finished even and fair all as specified and directed.

M & L for 150mm thick plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in hardstanding complete all as specified and directed.

M & L for machine cut kota stone slab flooring 18 to 20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick screed bed in cm (1:6) including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge in steps or other sittuation complete all as specified and directed.

S & F 20mm thick granite (of any type) work (table rubbed and polished) for wall lining(veneering to wall) 12mm thick in cement mortar(1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM (1:6) complete all as specifed and directed.

M & L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all specified and directed.

M & L for coloured designer glazed ceramic tiles of size 300 x 450 x 7mm / 300 x 600 x 7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L for 25mm thick plain cement concrete (1:2:4) type B0 using 12.5mm graded aggregate as in sub base of floor complete all as specified and directed.

M & L for designed chequered coloured tiles (path tiles) of size 250 x 250x 22 mm thick laid over and including 15mm thick screed bed in cm (1:6) set and jointed in neat cement slurry andpointed in coloured cement matching with tiles complete all as specified and directed.

M & L for forming contraction (dummy) joints 65mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M & L for 10mm thick rendering in CM 1:6 over brick / conc wall surfaces trowelled to even & smooth w/o using extra cement for internal wall complete all as specified and directed.

All as as per item No 53 here-in-before but 15mm thick in CM 1:4 mixed with WPC as per manufacturer's instruction for external wall complete. Note: WPC shall be measured and paid separately.

All as as per item No 53 here-in-before but 5mm thick in CM 1:3 as in ceiling complete.

Supply only water proofing compound.

M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

All as per item No 57 here-in-before but on ceiling.

M & L for preparation of newly pastered or unplatered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

M & L for preparation of new wooden surface of any description and applying two coats of synthetic enamel paint over one coat of pink primer, over 10cm in width or girth complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specifed and directed.

S & F GI tubing "medium grade" galvanized with all fittings and fixed complete to walls and ceilinng or laid in floors etc complete all as specified and directed for the following bore :-

15mm dia

20mm dia

M & L PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls / laid in floors complete all as specified and directed.

All as per item No 63 here-in-before but 75mm bore.

M & L PVC (SWR) bends of 110 mm bore of any radius complete all as specified and directed.

M & L 110mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

M & L 75mm PVC (SWR) vent cowl complete all as specified and directed.

S & F 75mm bore sand cast Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank double layered 1000 ltr capacity (Cylinderical vertical with closed top) with tank nipple and 20mm bore ball brass valve hoisted and fixed in position complete all as specified and directed.

S & F 20mm bore gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F 15 mm bore chromium plated fancy type angular stop cock with wall flange conforming to cat No Con-053KN of Make Jaquar of eqivalent model from the make list given in PS

S & F 15 mm bore chromium plated 2 way bib cock with wall flange confirming to CAT No. 29041 of make : Jaquar (fusion)" or equivalent model from the make list given in the PS.

S & F 15 mm bore pillar taps chromium plated, fancy type as per Cat No.Con-021KN Jaquar of or equivalent model from the make list given in the PS.

S & F 15mm bore stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as per cat No Con-053 KN of make jaquar or equivalent model from the make list given in PS all as specified and directed.

S & F CP towel rail 20 mm dia and 600 mm long including brackets conforming to CAT No. ACN-1111N of "Jaquar" or or equivalent model from the make list given in the PS.

S & F chromium plated pegstay (set of three) complete all as specified and directed.

S & F chromium plated toilet paper holder conforming to CAT No. F5001109 of Cera or equivalent model from the make list given in the PS all as specified and directed.

S & F Health faucet conforming to CAT No. ALD-573 of make "Jaquar" or equivalent model from the make list given in the PS.

S & F Vitreous China Urinal, Half stall type, white excluding push cock, flush pipe and waste pipe etc complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured , including fixing bolts etc including PVC seat cover white flat bottom and CP or aluminium anodised hinging devices etc. complete all as specified and directed.

Supply and fix PVC Valve less syphonic action type flushing cistern 10 litres capacity low level white ,with inlet ball valve float and handle including brackets complete all as specified and directed.

S & F oval shaped coloured vitreous china WHB table top Colonia snow white, fancy type of overall size 595 x 380 mm, cat No 7751 of cera or equivalent model from the make list given in the PS including 32 mm CP waste coupling, PVC waste pipe etc complete, including granite slab counter of black colour as approved and of size 1.20mtr x 0.60 mtr includingrounding edges cutting nitches rounding edges etc complete, horizontally supported by 01 No of 35 mm thick cuddappa stone slab one side mirror polished complete all as specified and directed by Engr-in-Charge.

S & F 15mm dia 600 mm long PVC connection pipe with 2 Nos CP brass check nutscomplete all as specified and directed.

S & F 32mm bore PVC waste pipe complete all as specified and directed.

S & F SGSW gully trap of size 150mm x 150mm square or round mouthed, type P incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F 75mm dia castiron floor trap with steel grating including jointing with solvent cement complete all as spd and directed.

M & L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed with collars laid in trenches and jointed as specified complete all as specified and directed.

M & L for PCC 1:4:8 type D2 using 40mm graded agg as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specifed and directed..

M & L for Cutting into existing manholes for connecting new drains of 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

S & F PTMT grating square of 150mm size for nahani/ floor trap including jointing complete all as specified and directed.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through duly concealed conduits in wall /roof/ floor along with suitable fittings, with MS sunken boxes of 1.6 mm thick, of suitable size including Modular cover plate and frame for housing modular switches sockets etc along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for One light point controlled by one, one way switch complete all as specified and directed.

S & F Modular Switch single pole, one way 6 Amp all as specified.

S & F for ceiling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified.

S & F for MCB DB, SPN, sheet metal enclosure, 2 way, single door, fixed on wall making good to disturbed surfaces, and connecting with existing cable complete all as specified and directed.

S & F for MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified and as directed.

S & F for wall mounted LED tube light fitting T-8 20 watts with output of 2000 lumens , box type light fitting, 230 volts with extruded CRCA sheet coated heat shrink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and directed.

S & F bulkhead luminaire including LED bulb 10 att all as per cat No 112334 B1BWP 10W LED of Bajaj or equivalent model of from the make given in the PS

S&F LED mirror light fitting 10 watt complete in all respect having high luminaire, integrated LED channel with white acrylic cover of 10W cap.Cat Part No BCLSB10WH of Bajaj or equivalent model from the make list given in the PS.

M & L for Sub main wiring complete with two single core 2.5 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 2.5 sqmm in and including PVC conduits and accessories complete all as specified. Note:- Making good of disturbed surfaces will be done by contractor without any claims. (Note :- 3 runs of 2.5 Sqmm conductor and one run of PVC Conduit shall be measured as one unit length.)

S & F exhaust fan of sweep 300mm with louver heavy duty single phase suitable for 230 volts 50 HZ,1400 rpm and connecting up complete including provision of 3 core flexible cord from ceiling rose to connector of fan with cable of suitable size. Make :- Bajaj or equivalent model from the make list given in the PS.

Suma Construction