Garwa Providing DI pipe for raw water rising main DI distribution system repair of SS Tank and providing FHTC under JJM category II in village Garwa

Amount

Supply & Erection of Horizontal spindle split casing type pumping sets of miniuim four star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. (A) Clear water pump set (At W/W ) 1200 LPM, 40 mtrs head 20 BHP

Supply, erection, testing and commissioning Wall mounted (B) Raw water pump set (At W/W ) 1200 LPM 12 mtrs head 7.50 BHP

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- for clear water pumpset 1200LPM 40 mtr Head. a) Main switch 63 Amp. 2 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 1200 LPM x 40 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) change over swithc 63 amp 1No.

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- for clear water pumpset 1200LPM 12 mtr Head. a) Main switch 63 Amp. 2 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 1200 LPM x 12 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) change over swithc 63 amp 1No.

Supply erection testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 6 mm complete in all respects with accessories like thimble etc.

Taking out second layer to bottom layer filter media and wasing cleaning and screening and replacing the same into filter beds

Taking out 2" thick RCC bed plates and replacing into the same filter bed after washing and cleaning.

Providing and fixing of complete floating arm and floating drum fabricate of GI sheet of 16 guage with M.S. bolts made of M.S. flat and C.I. flange welded on it with coller one side and other side wire mash welded to prevent foreign elements to enter in floating arm fixed with CI swall bend with C.I. base plate fixed with anchor bolts in water tank haudi 8" i/d Floating arm complete in all respect as per specification of Engineer-In-Charge

Supply erection , testing of light fittings including wire in the Pump Chamber with material upto 10 points including switch , button , plug, PVC conduict pipe & copper wire etc. as per approved specifications.

Providing & fixing celling fan 1400 mm 56" with speed adjuster make (make crompton, usha, Bajaj) complete in respect.

Bidder Name

Amount

RAMBIR CONTRACTOR(GSTN-06BJEPR8814D1Z6)

Balwan Singh contractor(GSTN-NA)

M/S S.S.B. CONSTRUCTION COMPANY(GSTN-NA)

SANDEEP KUMAR CONTRACTOR(GSTN-NA)

Naveen Kumar Contractor(GSTN-NA)

M/S S.S.B. CONSTRUCTION COMPANY

SANDEEP KUMAR CONTRACTOR

Naveen Kumar Contractor

Balwan Singh contractor

Balwan Singh contractor

SANDEEP KUMAR CONTRACTOR

M/S S.S.B. CONSTRUCTION COMPANY

Naveen Kumar Contractor