Construction of JSV Division Office Building at Chowari in Tehsil Bhattiyat Distt Chamba HP SH Providing EI Survilance System Fire Safety Etc in Division Office Building

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.Group C.complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 2x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Wiring for circuit / sub-main with 2x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supply and fixing profile lighting 19/25mm icluding 60 LED with aluminium profle and diffusser.and driver PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (fle HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

2 modules ( Size 78mmx78mmx50mm)

Bell push, Modular.

TV. Socket outlet, modular.

Telephone Socket outlet, modular.

Supplying and fixing of 25mm dia size of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as requiredcomplete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and fixing ding dong bell, suitable for D.C./A.C. single phase,230 volts complete as required:- complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and fixing WIRE LESS Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Providing installation, Testing and commissioning of Ceiling Fan with step electronic fan regulator paino type, including wiring the down rod of standred length (up to 30 Cm) with 16/0.20 mm twin twisted flixible, cotton braided cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.1200 mm Sweep mmsweep 1200 mm sweep 1200 mm etc.complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-Make:- Bajaj/ Usha/Crompton Greavs or equivalent make.Exhaust Fan, Light duty, (Domestic) 300 mm sweep complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and fixing of fancy wall bracket containing thread type LED lamp holder (s) of all sizes and shapes, complete with all accessories but excluding LED lamp including making connections, testing etc. as required. Mirror light LED 5W. complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and fixing LED retrofit lamp suitable for 9 Watt LED, B-22 holder base fittings with polycarbonate diffuser and aluminium heat sink as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Providing and installation of INSTANT type Electric water heater (Geyser) of 3 Ltr. Capacity (catA) by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- (Make:- Usha/ Racold/ Havells) complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Providing and fixing decorative extruded tube fixture having high quality design suitable for LED tube up to 20Watt (2000 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, including one no. tube rod 20 Watt complete with all accessories, connections, testing and commissioning etc. as required.LED Tube Fixture 20Watt (1135mm x22mmx37mm)Make:-/Panasonic/Havells/Anchor complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and fixing surface mounting following size LED solution suitable for surface application with the use of the latest technology 6/12 Watt (600/1200 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required.Make:-/Panasonic/Havells/Anchor LED 6 Watt Round (Dia: 125 mm Height: 30 mm) complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and fixing surface/recess mounting following size LED solution suitable for surface application with the use of the latest technology 6/12/18 Watt (600/1200/1800 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required.Make:- /Panasonic/Havells/Anchor complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

LED 9 Watt Round (LXW: 125 mmX125MM. Height: 30 mm)

LED 18 Watt Square (LXW: 225 mmX225MM. Height: 30 mm)

Providing and Fixing of 1200 mm X 300 mm LED fixture 36 W +/- 1W Recess mounted fixture with HET Plastic diffuser with CRCA Powder Coated housing having minimum system lumen efficacy 100lm/W with P.F.>0.95 with THD<10%. The LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of 5700 K with CRI of minimum 80. The Input voltage range shall be 150V to 270V , 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects.Make:-/Panasonic/Havells/Anchor Sauver (Surface)-36W/1ft.x4ft.

Providing and errection of LED 45 watt Street light luminaries, powder coated pressure die-cast aluminium SMDLED Street light with heat resistant toughened glass including connections, testing and commisioning etc. as required.Make:-Jaquar/Panasonic/ Wipro LED Street Light, 45 Watt

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Single pole in the existing MCB DB complete with connections etc. as required:-(Make:- C&S /Havells)complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and fixing 40 Amps. rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required:-(Make:- C&S /Havells)complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and fixing 63 Amps. rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCBO), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required:-(Make:- C&S /Havells)complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying and fixing 40Amps. rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required :-(Make:- C&S /Havells) complete in all respect and as per the direction of Engineer- in-Charge.

Supplying and fixing 63 Amps. rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required :-(Make:- C&S /Havells) complete in all respect and as per the direction of Engineer- in-Charge.

Supplying and fixing 16 way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.complete in all respect and as per the direction of Engineer-in-Charge.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required ccomplete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supplying, installation testing and commissioning of 2 Ton capacity Cassette type (Hot & Cold) Air Conditioning unit with cool surround 360 Degree super slim design with built in drain pump of LLoyd make confirming to I.S.I.-1391 Established since1884 with ammendment No.1(except power consumption norms) fitted with hermatically shielded air compressor as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In- Charge.

SITC of Bullet Camera 1/3” 2MP Progressive scan CMOS . Min. Illumination [email protected]. Effective Pixels 2688(H) x1520(V). Angle of View • Horizontal: 104°–27° , Vertical: 55°–15°, Diagonal: 124°–31°. Shutter Speed Auto/Manual, 1/3~1/100000s. Lens 2.7mm~13.5mm Motorized. Gain Control(AGC) Auto/Manual. Video Compression H.265+/H.265/H.264+/H.264. S/N Ratio More than 50dB or better. Streaming Capability Triple Streaming, (2560 × 1440@25 fps); (704 × 576@25 fps); (704 × 480@30 fps). Privacy Masking Upto 4 Areas. Smart Analytics Tripwire, Intrusion. Motion Detection Off / On (4 Zone, Rectangle). ICR Switch. Digital Zoom 16x. Audio Input/ Output 1 IN /1 OUT. Audio Compression G.711A/G.711Mu/G.726/AAC . Alarm IN/Output 1 IN/1 OUT. Wide Dynamic Range Upto 120dB or better. Ethernet RJ-45 (10/100M Base-T). IR Range of 60 Mtr. Micro SD Card (support max. 256 GB); NFS. Weather Proof Rating IP67. Certificates CE,FCC, UL, BIS.Make-: Bosch/CP PLUS/Honeywell with Two year warrenty complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

SITC of Dome Camera 1/3” 2MP Progressive scan CMOS . Min. Illumination [email protected]. Effective Pixels 2688(H) x1520(V). Angle of View • Horizontal: 104°–27° , Vertical: 55°–15°, Diagonal: 124°–31°. Shutter Speed Auto/Manual, 1/3~1/100000s. Lens 2.7mm~13.5mm Motorized. Gain Control(AGC) Auto/Manual. Video Compression H.265+/H.265/H.264+/H.264. S/N Ratio More than 50dB or better. Streaming Capability Triple Streaming, (2560 × 1440@25 fps); (704 × 576@25 fps); (704 × 480@30 fps). Privacy Masking Upto 4 Areas. Smart Analytics Tripwire, Intrusion. Motion Detection Off / On (4 Zone, Rectangle). ICR Switch. Digital Zoom 16x. Audio Input/ Output 1 IN /1 OUT. Audio Compression G.711A/G. 711Mu/G.726/AAC. Alarm IN/Output 1 IN/1 OUT. Wide Dynamic Range Upto 120dB or better. Ethernet RJ-45 (10/100M Base-T). IR Range of 60 Mtr. Micro SD Card (support max. 256 GB); NFS. Weather Proof Rating IP67 IK10. Certificates CE,FCC, UL, BIS.Make-: Bosch/CP PLUS/Honeywell Two year warrenty complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

SITC of Network Video Recorder HD Quad-core processor. Operating System Embedded LINUX. IP Camera Input 8 channel With 2 TB HD. Video Output 1 HDMI, 1 VGA. Compression H.265+/H.264+ dual codec decoding. Video Resolution 3840× 2160, 1920× 1080, 1280× 1024, 1280× 720, 1024× 768. Max 640Mbps (Incoming + Outcoming) ,Up to 12MP resolution preview and playback. Motion Detection MD Zones: 396(22×18).Hard Disk 2 SATA III ports, up to 10TB Each. Alarm Input 4 Channel, Low Level Effective, Green Terminal Interface. Alarm Output 2 Channel, NO/NC Programmable, Green Terminal Interface. Smart Phone iPhone, iPad, Android Phone. Trigger Events Recording, PTZ, Tour, Video Push, Snapshot, and Screen Tips. Recording Mode Manual, Schedule (Regular, Continuous), MD (Video detection: Motion Detection, Tampering, Video Loss), Stop. Search Mode • Time/Date, MD & Exact search (accurate to second),Smart Search.Backup Mode USB Device/Network. Interface Ports • 1 HDMI, 1 VGA, 2 USB(1 Rear USB3.0,1 Front USB2.0), 1 RS485, 1 RS232. Ethernet 1 RJ-45 port (10/100M/1000M). Make-: Bosch/CP PLUS/Honeywell five year warrenty complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

SITC of Layer -2 4+2 Port Gigabit PoE 10/100/1000Mbps Switch. port1-port 8 can support 250m supply power. PoE Power Budget 250W. LED light 26 Link/Act Indicator light, 16 PoE indicator light, 1 Power indicator light. PoE Standard IEEE 802.3i IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at. Prioritize the identified video data to make video transmission smoother. Automatic detection power of port, power off and restart the device. Make-:Molex/CP PLUS/D-Link Two year warrenty

SITC of 8-port 19" 1 U jack panel which Should Be made of ABS, Should be 19" 1U straight Patch Panel, 8-port,Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks, Should have rear cable management shelf metallic powder coated Make:-D-Link/Systimax/Molex

SITC of 17U Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangements and as per the specifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Makes:-Netrack/ Comrack/D-Link With Two year warrenty

SITC of 55" LED Monitor, Smart, Full HD, HDMI Port, Component Video Inputs, 1 Digital Audio Out, Make: LG/Panasonic/Samsung/Gilma with Two year warrenty

SITC of Wirless Mouse Make HP/DELL/LOGITECH. All required

SITC of CAT 6 UTP Cable.Transmission frequency of 250 MHz (Minimum),cable Should be 4 pair and Cable should be jacket FR PVC Lbp 69% required with certification report. Make:- Molly/D-link/Systimax complete in all respect and as per the direction of Engineer-in-Charge.

SITC of Webcam 1080 Full HD 30 FPS ,Plug and Play setup,wide angle view of video calling on Skype,Zoom,Microsoft terms and other apps.Make Logitech,HP,eMeet. complete in all respect and as per the direction of Engineer-in-Charge.

SITC of 3core 1.5sqmm power cable. Make: KEI, Havells,L&T complete in all respect and as per the direction of Engineer-in- Charge.

SITC of 3core HDMI cable 4K.. Make: Cablewise, Hi. complete in all respect and as per the direction of Engineer-in-Charge.

SITC of RJ 45 Connector Socket with Modular Box and Cover Plate 2M. Make: D Link complete in all respect and as per the direction of Engineer-in-Charge.

Providing, installation, testing and commissioning of 'Silent' type Diesel Generating Set as per CPCB-IV norms alongwith having Prime Power Rating of 60 kVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 Volt suitable for 50Hz, 3 Phase System and consisting of the following and as per specifications and conditions: Makes:- Sudhir/Kirloskar/Ashok Leyland. complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In- Charge.

Providing/filling Diesel in the existing Diesel Set of Generator as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. complete in all respect and as per the direction of Engineer-in-Charge.

Providing and laying 1:4:8 (1 cement : 4 Coarse sand : 8graded stone aggregate 20 mm nominal size) in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering , finishing and reinforcement complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Centering and shuttering including strutting propping etc. and removal of form work for Retaining walls, return walls, (any thichness) including attached pilasters buttresses, plinth and string courses fillets, kerbs and steps etc.

Providing and laying in position 1:2:4 cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-(Make:- KEI/ Plaza/Havells)Armoured cable 35 sq. mm (3.5 core)

Supplying and fixing TP&N copper bus-bar chamber suitable for 415 volts capacity with 4 No. copper strip bus-bars each of length and x-section suitable for following current carrying capacities, enclosure made of sheet steel, dust protected, duly powder painted with detachable gland plate and other accessories including drilling holes on the board, making connections, earthing etc. as required.100 A Copper Busbar Chambers complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Providing and fixing 100Amp.rating, four pole, 415 volts, On-Load change over switch unit, in sheet steel enclosure, with side handle operation, including drilling holes on the board, making connections, etc. as required comlete in all respect.Make Havells/Bentec/L&T. complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Providing, laying, jointing and testing in following sizes of MS Class 'C' (heavy class) pipes Conforming to IS: 1239/3589 with accessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories as required.Make. TATA, JINDAL HISSAR etc.complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

M.S. Pipe25 mm

M.S. Pipe 80 mm

M.S. Pipe 100 mm

Proviidng ,Installing and commissioning of Frist Aid hose reel with MS Construstion spray painted in post office red (swinging type hose reel drum) Conforming tp IS 884 with upto date amendments complete with 30 mtr long and 20 mm nominal internal dia heavy duty r water hose thermoplastic (Teitile reinforced )type II, 20 mm dia globe valve stop cock. Tetrminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete as required.Make. Life Safety, Atasee, Ceasefire etc complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer- In-Charge.

Supply, installation, testing & commissioning of : Gun metal ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type 'A')Make. Life Safety,Atasee,Ceasfire etc,.complete in all respect and as per the direction of Engineer-in-Charge.

Providing, fixing of 63 mm dia, 15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Gunmetal male & female instantaneous type coupling (IS 903).Make. Life Safety ,Atasee,Ceasfire. complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Providing & fixing 63 mm dia Gun metal Branch pipe with Gun metal with 20 mm (nominal internal dia) Size Gun metal Nozzle with standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe & Nozzle shalll Confirm I.S 903.Make. Life Safety,Atasee,Ceasfire. complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Providing &fixing fibre glass reinforced Fire Hose Cabinet ( 30"x24"x10") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words" Hose Cabinet" on the Box complete as requried. Make. Life Safety,Atasee,Ceasfire. complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Providing Gunmetal Collecting head with 63 mm dia instantaneous type inlet +150 mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 20kg/mm2 including necessary support complete in all respect. Make. Life Safety,Atasee,Ceasefire.Two way

Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm.Make. Zoloto, Sant,LP.100mm complete in all respect and as per the direction of Engineer-in-Charge.

Providing and fixing Cast Cast Iron/steel double flanged Dual Plate type with gunmetal seat non-return valve confirming to class - I of IS including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications complete in all respect.Make. Zoloto,Kartar, etc.100 mm dia complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supply, Installing, testing and commissioning of 100mm dial type pressure gauge gate valve with all accessories as requried. Make. Guru.,SystemSensor,Fbig.etc. complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

SITC Pressure switchs for Main Pump including necessary wiring up to control panel and Ballvalve. Make. Danfoss,Sant,LP.complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Supply, Installing, testing and commissioning of 25mm dia Ball valve with all accessories as requried.Make. Unik,Sant,LP. complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

Terrace Pumpset Lubi Make pump in back pull out design (end suction type ) having 100 mm suction, 65 mm delivery,CI casing , CI impeller and CS shaft with gland packing arrangement coupled on common baseplate tp Lubi/ABB/CEL or equivalent (at our option ) make 3.75KW/5HP, 2900RPM TEFC sq.cage induction motor suitable for 3 phase,415V,50Hz Ac Supply confirmimg to through suitable flexible coupling ,, 450 LPM, including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

SITC of Cubical type Automatic panel for ground level pump fabricated from 1.6mm thick CRCA sheet wall mountedtype made 1.8SWG IP 42 compartmentalised withhinged locable doors, dust and vermin proof.powder coated of approved shade after 7 tank treatment process,cable alley,inter connection,Incomer 63 amp . TP MCCB with voltmeter.Ampere Meterinbuilt 72 mm meter, Outgoing 10 HP DOL Starter and auto/Manual switch with R/Y/B Three phase indication pump running staus indication push buttion start and stop etc. and internal wiring,earth terminal nimbering,suitable 4 wire 415V ac 50 Hz 10HP Dol Starter control wire FR copper conductor etc complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-in-Charge.

Supplying of 4 Kg. ABC MAP-50% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases.Make Minimax,atasee,Cease Fire etc.complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-in-Charge.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size.Armoured cable 25 sq. mm ( 3.5 core) complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-in-Charge.

SITC of Non Return Vaive 100mm dia including flange and nut bolt etc. as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-in-Charge.

SITC of Smoke Detectors.Make Agni complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-in-Charge.

Wiring for circuit for smoke detectors with 1.5 Sqmm 2 core PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit as required. complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-in-Charge.

SITC of MCP for smoke detectors in each floor complete with testing commissiong etc. as required.

SITC of Fire alert Syren complete with testing commissiong etc. as required.

SITC of smoke detection control panel four zone suitable for maximum forty nos. of smoke detectors complete with testing commissiong etc. as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-in-Charge.

SITC of EPBX 16 Channel telesoft make complete with testing commissiong etc. as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.

SITC of Telephone set Beetal Make complete with testing commissiong etc. as required complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-in-Charge.

Arun Malhotra (BID ID -605774)

Vishal Suri (BID ID -605781)