Renovation and Up-gradation of Assam State Consumer Disputes Redressal Commission at House fed Complex, Central Block, 5th floor, Beltola Basistha Road, Guwahati-6

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :15.12.2: Of area beyond 3 sq. metres

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.15.23.2: For thickness of tiles above 25 mm and up to 40 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.11.41A3: Glazed Vitrified tiles Matt/Antiskid finish 11.41A.3.1: Size of Tile 600 x 600 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately)Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made..26.86.6: Frame size 65 x 125 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 26.88.2: 35 mm thick

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.6.13.1: Cement mortar 1:3 (1 cement :3 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for :5.9.3: Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.5.22.A6: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size de rived from natural sources).

12 mm cement plaster of mix :13.1.1: 1:4 (1 cement: 4 fine sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.8.2.2: Granite of any colour and shade 8.2.21.1: Area of slab upto 0.50 sqm

Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :13.43.1: Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :13.60.1: Two or more coats on new work

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :17.3.1: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.17.73.2: 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :17.10.1: Kitchen sink with drain board 17.10.1.3: 510x1040 mm bowl depth 250 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall b) 18.7.2: 20 mm nominal outer dia Pipes

b) 18.7.3: 25 mm nominal outer dia Pipes

Providing fitting fixing PVC panels for wall and ceiling (plain) with meterials & installation including labour, carriage etc. as director and specified.

Providing erecting cutting and fixing of 420mm depth free standing file cabinet/ rack with laminated finished erected/making to be made with 19 mm thick Greenply Plywood on all frame structure and required partition with self member as per required height with providing fixing of edge binding in all plywood edges cutting and pasting with fixing for 1.5 mm thick decorative laminated sheet in both side of ply surface inluding all hardware fittings like, nails, fevicol, pasting tap, handle, lock, hinges, tower bolt, magnate catcher etc. as a complete with all necessary required materials and labour as directed by the concerned department.

PRODUCT-AL-60 WORSTATION: Table top and 1200 HT partitions specification: partion: AL60, Height 1200mm Tale top, 25mm thick Pre-laminated particle board finished with 2mm edge lipping. Tile Finisherers partition:Partition is made of 60mm thick with fabric above and laminate below the table top. Fabric magnatic and laminate board markers are provide for each worstation. .Return and end screen 525L*12mm fabric magnetic screens . Support MS MS Brackets and gable ends Wire Management: Cement Hole provide on table top : Recovery provided below table top. Mobile Pedestal 2D+ IF size 400W x450Dx500HT Pedestal: Pedestal are made of 18mm thick, PLB withg 2 drawer units 1 filling folder unit. The Drawer units are made with the use of castors. The drawer units are provided finger groved handle and suitable locks CPU TROLLEY AND KEYBOARD TRAY Make Federlite 1200L x 600D x750 HT.

Visitor Module table & Reception Table:-Model: Edge Table Specification Table top 25mm thick per laminated board with 2mm edge lipping. Supported on 50x 50mm square powder coated legs. Front Modesty wire namagement: race way below table top with gronet hole Mobile Pedestal 20D+ IF size 400W x450Dx500HT Pedestal: Pedestal are made of 18mm thick, PLB withg 2 drawer units 1 filling folder unit. The Drawer units are made with the use of castors. The drawer units are provided finger groved handle and suitable locks CPU TROLLEY AND KEYBOARD TRAY Make Federlite 1table size 150x600x750 HT side table size 900x450x750 HT with Return Screen.

Workstation & Receiption Chairs Model: Contact Project MB. Medium mesh back chair Single lock synchro mechanism Fixed arms NYLON base Make: Federlite.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.1.24.1: 5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Bell push

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.1.27.1: 1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

6 Module (200mmX75mm)

12 Module (200mm X 150mm)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular base & cover plate for modular switches in recess etc. as required (a) 1/2 Modulke (89mm x89mm)

(b) 3 Modulke (117mm x89mm)

(d) 6 Modulke (214mm x89mm)

Supplying with fitting fixing of surface & wall mounted LED luminaries complete with all accessories including driver directly on wall/ ceiling including connection with 1.5 sq mm PVC insulated S.C. copper conductor as required and as directed by the department (Crompton/Phillipos/ Bajaj/ Havells or equivalent considering the mother items rate and specification) 18W 4 ft LED Batten

Supplying and commissioning of the following indoor recessed Type Round Luminaris complete with all accessories including driver in the false ceiling (armstrong/ Gypsum or similar type) mounted with necessary support and connection with 1.5 sqm PVC insulated SC copper conductor as required and as directed by the deptt. (Surya or equivalent make) 15W, recessed round Type LED fitting.

Supplying with fitting fixing Recessed mounted LED luminaries complete with all accessories including driver directly on false ceiling including cutting ceiling & connection with 1.5 sq mm PVC insulated S.C. copper conductor as required and as directed by the department (Phillipos or equivalent considering the mother items rate and specification) 6W recessed round Type LED fitting.

Supplying with fitting fixing Recessed mounted LED luminaries complete with all accessories including driver directly on false ceiling including cutting ceiling & connection with 1.5 sq mm PVC insulated S.C. copper conductor as required and as directed by the department (Bajajs or equivalent considering the mother items rate and specification) 36W 600mmx 600mm LED recessed fitting.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.2.10.1: Single pole

Single pole and neutral

Supplying fitting fixing following 4P 240-440V 'C' Series 10 ka MCB in the existing DB/ panel as specified and directed by the department (Havells or equivalent make) 63A 4P 240-440V 'C' Series 10 ka MCB

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2.4.2: 6 way (4 + 18), Double door

Supplying including fitting fixing of AC Starter of 20 A Motor Starter for AC machine in the existing 2/3 Module modular box with front plate as directed by the deptt. (a) 20 A Modular Motor Starter (havells of Equivalent mke)

Supplying including fitting fixing of following 4 strip Aluminium Bus Bar with enclosure as specified as directed by the deptt. (havells of Equivalent mke) 100A 4 Strip 4 way Bus Bar

Supplying including fitting fixing of following 4 Pole on line Change Over Switch with enclosure as specified as directed by the deptt. (havells of Equivalent mke) 125A 4 Pole On-Line Change Over

Supplying including installation, testing and commissioning of Air Water Cooled Diesel Generator set coupled to suitable alternator of 220/415V, AC, 1/3-Phase 0.8 p.f. mounted on a 1) M.S. Fabricated base frame, 2) M.S. fuel tank of required capacity, 3) Residual Silencer, 4) AMF Panel, 5) Suitable batteries with lead, 5) First fill of lube oil, 6) Acoustic Enclosure complete with all accessories including minimum 100leters of Diesel for initial starting as specified and directed by the department conforming to IS comprising the Technical Specification as per manufacturer. Greaves or equivalent make: 40/32KVA/KW-3.0 PHASE- Size 1887mm (L) X 1080mm (B) X 1322mm (H)-Approx Wt. 1270kg

Supply with installation & commissioning of readymade maintenance free CPRI approved chemical earthing system with 100 MM dia. 2.9 Meters length corrosion free centrifugally Cast Iron Earthing Electrode complete with Reslow/BFC Grounding chemical compound ( 40 KG) and Advance Earth Pit cover (CI) of size 300 mmx300 mm including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the Deptt. 100 mm Dia Chemical Earthing

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply of following size PVC/XLPE insulated and PVC sheathed I.IKV gd Solid Aluminum conductor up to 10 sqmm, balance stranded conductor, XLPE nsulated, cores laid up. PVC tape innersheathed. Armour (Aluminium wire for single core up to 70 sqmm, balance Aluminium strip, Glavanised wire for cables upto 2x 10 sqmm,. 3xl0 sqmn,.4x6 sqnm, & balance all galvanised steel strip), extruded PVC Type ST2 sheathed. 650/1 100V grade as per IS 7908(Part I) 1988 armoured U.G. cable as specified and directed by the dept. (Havells or equivalent make) 35.0 sqmm 4 core

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.7.1.1: Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.7.7.1: Upto 35 sq. mm (clamped with 1mm thick saddle)

Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Buildrite Constructions