ADDITION/ALTERATION AND SPECIAL REPAIRS TO OFFFICERS MARRIED ACCN TO BLDG NO P-13 AT INS CHILKA UNDER GE CHILKA

Amount

Taking down existing waterproofing treatment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100M complete all as specified and as directed.

M&l water proofing treatment to roof as per per manufacturer's instructions with the following specification:-. (a) 15 mm thick plastering in cement mortar 1:4 mixed with and including water proofing compound @3% by weight of cement including preperation of roof surfaces. (b) Applying evenly a coat of bitumineous primer @ 0.5 litre per Sqm (c) Applying evenly a coat of hot blow bitumen 85/25 grade @ 1.2 Kg per Sqm (d) Applying APP based polymeric membrane minimum 3 mm thick and minimum weighing 3kg/sqm laid on primed surface by LPG forced torch application with a side & end overlaps of minimum 100 mm. (e) Applying evenly a coat of hot blown bitumen 85/ 25 grade @ 1.2 Kg per Sqm over water proofing membrane (f) Applying a coat of bituminous based aluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturer's instructions (g) Testing for water tightness by water ponding at least 72 hours

Demolition of cement concrete unreinforced in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each including easing and adjusting as required including refixing with existing chowkhats complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowklats complete all as specified and as directed.

S&F 35 mm thick 2nd class hard wood, Glazed & skeleton door shutters, open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a); supplied & fitted to Chowkats complete all as specified and as directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 75 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply only 50 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

S&F mild steel work as in flat iron of size 25X3mm as in hold fasts complete all as specified and as directed.

S&F Second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like articles not exceeding 200 Cucm each complete all as specified and as directed.

S&F 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section including fixing blots and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 300 mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer including preperation of new wooden surfaces of any description exceeding 10 cm width or girth complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick style considering of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded both side Prelam PVC sheet used PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification and as shown on drawing complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F anodised powder coated of any colour (thickness of powder coating not less than 50 micron) aluminium window/ventilator shutters, side hung type without sash bars , aluminium sections minimum weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking , anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long (1 No) in skelton shutter, stainless steel butt hinges type B-21 75 mm long (02 Nos) ,friction hinges 300mm (01 pair) in glazed shutter suitable handle 1No and 100 mm size powder coated aluminium tower bolt (02 Nos) with aluminium flat and screws complete all as specified and directed Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window / ventilator shutters, fixed type without sash bars, aluminium sections minimum weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed. Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window/ventilator shutters of sliding type without sash bar, aluminium sections minimum weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, rollers, holding and with locking arrangements complete all as specified and as directed. Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein.

S&F 75 mm long brass handle, cast type, polished bright complete all as specified and as directed

S&F 100 mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply only 4.8 mm thick plain sheet glass ,ordinary quality, in square exceeding 0.5 Sqm each pane fixed to aluminium joinery complete all as specified and as directed.

Supply only 4.8 mm thick frosted sheet glass ,ordinary quality, in square exceeding 0.5 Sqm each pane fixed to aluminium joinery complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed to joinery complete all as specified and as directed.

S&F 18 mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, fixed to aluminium/ timber joinery complete all as specified and as directed.

S&F for anodised powder coated of any colour (thickness of powder coated not less than 50 micron) aluminium grill of make "Deco grill" and DG-202 model with aperature size 60mmx45mm fixed with suitable channel complete all as specified as directed.

Dismantling of floor, health or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and applying cement slurry @3 kg/Sqm complete all as specified and as directed.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350mmx250mm or 450mmx350mmx 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L for Vitrified ceramic tiles 9 to10 mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match (light shade) in and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

S&F standard aluminium door seal with nylon brush (minium length 1.2m) at lower side to fit at the bottom of door shutter with screws complete all as specified and as directed.

Demolition of brick or stone masonary work built in cement mortar including all quoins , arches, pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L brickwork with fly ash bricks, straight or curved on plan to any radius as in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

S&F Cabinet mirror with PVC body having overall size 330mm x430mm including all accessries as required complete all as specified and as directed. Make:-Prayag Cat No 551 or equivelent as approved.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F in repair 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bend with access door complete all as specified & directed.

S&F 75 mm bore PVC (SWR) bend with access door complete all as specified & directed.

S&F 110 mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair 50 mm bore low density plyethylene(LDPE) pipe of pressure rating 6 kgf/sqcm as in waste pipe to wash hand basin, kitchen sink, urinal etc complete all as specified and as directed.

S&F 500 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections including dismantling existing unserviceable water tank complete all as specified and as directed.

S&F 1000 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections including dismantling existing unserviceable water tank complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40mm garaded stone aggregate as in plinth protection,laid in alternate panel including necessary use and waste of form work as requieed, surface finished even and fair complete all as specified and as directed .

S&F in repair PVC low level flushing cistern of 10 litre capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repair stainless steel sink with draining board made out of 1.0 mm thick sheet for kitchen with plug , washers waste pipe , cast iron cantilever brackets connecting union over all size 915mmX460mm with bowl size 410mmX330mmX160mm complete all as specified and as directed .

S&F stainless steel plate rack of size 24x30x10 inch complete all as specifed and as directed. Make:-Prayag cat part No P-330 or equivalent as approved.

S&F in repair 15 mm dia chromium plated bib cock sink tap regular spout(W/M) with flange , fancy type screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. Make:- Prayag cat No 6316 or equivalent as approved

S&F in repair 15mm bore dia, Bib taps chromium plated , fancy type screwed down for iron pipe and fixed complete all as specified and directed. .

S&F in repair Brass chromium plated tubular towel rail, 20mm dia , D type, 600mm long complete all as specified and directed.

S&F in repair 15 mm bore dia stop valves ,fancy type , chromium plated with long shank and cup (concealed type) , with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600mm complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Fixing only 15 mm bore old galvanised iron steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed.

Fixing only 20 mm bore old galvanised iron steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.

S&F 15 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 20 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.

M&L 40 mm thick cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in floooring , surface finished even and smooth using extra cement complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or on concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L 15 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement, surface finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately.

M&L 10 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.

M&L 5 mm thick rendering in cement mortar 1:3 on ceiling , surface finished even and fair complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion (Anti dust) paint exterior grade (100% acrylic) over a coat of primer on newly plastered surfaces of walls of any description over 10 cm width or girth etc complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty including preperation of newly plastered surfaces of wall complete all as specified and as directed.

M&L applying three coat of white wash on wall including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L applying three coat of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying two coat of weather proof acrylic emulsion, anti dust paint exterior grade (100% acrylic) of silver steak shade of asian paint over a coat of primer on old decorated external surfaces of walls of any description over 10 cm width/girth etc on columns/pillars , RCC chajja and facia of approved colour complete all as specified and as directed.

M&L for applying two coat of white wash on ceiling including preparation of old decorated plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying two coats of oil bound distemper of approved shade over a coat of alkali resistant primer over and including 1 mm thick wall care putty on wall including complete removal of existing treatment of old decorated surface of wall complete all as specified and as directed.

M&L for applying two coat of white wash on walls including preparation of old decorated plastered surfaces of wall complete all as specified and as directed.

S&F in repair 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F Continuous piano hinges mild steel, bright finish or electrogalvanised 30mm width of flaps (when open) complete all as specified and as directed.

S&F in repairs 140 mm Floor door stopper of aluminium alloy body and tongue, anodised with hard draw steel spring complete all as specified and as directed.

S&F in repair Brass chromium plated shower rose of size 125 mm with swivel joint for fixing to GI pipe of 15mm dia complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint of approved shade including preparation of old painted steel surface of any description over 10 cm width or girth complete all as specified and as directed.

S&F in repair chromium plated fancy type health faucet with hose & hook for EWC including all necessary fitting complete all as specified and as directed. Make :- Prayag Cat No 452 or equivalent as approved.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) ,white including fixing bolts (excluding flushing cistern & Pipe) including necessary connection to trap and flushing pipe complete all as specified and as directed.

S&F in repair plastic water closet seat (EWC), white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F 20 mm bore dia ball valve , high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed (mininimum weight -210 gms) complete all as specified and as directed.

S&F in repair 100 mm diameter of outlet of Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 580mm X 450mm with brackets complete all as specified and as directed.

Rounding for edges of stone slab one edge, such as in steps cooking platform and other similar work complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel curtain rod with fixing decorative bracket complete all as specified and as directed.

S&F in repair grating doom 100 mm dia of PTMT (minimum weight 25 gms) complete all as specified and as directed.

S&F in repair 15 mm center hole wash basin mixer with all accessories as per manufacturer's instructions and as required at site complete all as specified and as directed Make:-Prayag Cat No 6650 or equivalent as approved.

S&F in repair 15 mm wall mixer 3 in 1 with bend pipe with all accessories as per manufacturer's instructions and as required at site complete all as specified and as directed. Make:- Prayag Cat No 6480 or equivalent as approved.

Supply only water proofing compound complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F toilet paper holder, vitreous China white, box type fixed to walls with chromium plated brass screws complete all as specified and as directed.

S&F Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden or plastic cleats (minimum weight 90 grams) complete all as specified and as directed.

S&F sheet metal enclosure single pole and neutral with two pin and earth plug and socket complete with on single pole MCB 20 Amp complete complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F 10 Watt LED Bulk Head fitting Environmenatal friendly, ultra morden, energy saving, surface mounted, decorative oval bulk head edge- lit LED luminaries comprising of high brightness LEDs complete all as specified and as directed. Make:- Bajaj cat No BIBWP10WLED (Product code 112334) or Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or Philips Cat Part No.WT202WLED6SCWPSUSIPC as approved.

S&F 20 Watt tubelight fitting with lamp, Endura linear LED Wall mounted LED batten with polycarbonate housing & intergated driver for efficient heat dissipation with complete fitting complete all as specified and as directed. Make:- Havell Cat part No.- LUMILINEBS20WLED830SPCWH or Bajaj Cat part No. BCLSB 20 WH as approved

M&L for spray painting with white synthetic enamel paint including preparation of old surface of the ceiling fan of any make/model/sweep, filling cavities with filler after cleaning dust in situ or in other position complete all as specified and as directed. Make :- Berger paint(Luxol)/Asian paint (Apcolite) / Jenson & Nicholson paint Ltd (Brolac)

Taking down defective ceiling fan from its position and refixing the same after necessary minor repair such as oiling , greasing and provn of three core flexible copper wire from ceiling rose to connector of fan complete all as specified and as directed.

S&F in repair capacitor/ condenser of ceiling fan 2.5 mfd of approved make complete all as specified and as directed. Make :- Nicco/Havells/Universal

S&F in repair of ball bearing 6201 / 6202 / 6203 including metal filling, machining if required complete all as specified and as directed. Make :- SKF/NBC as approved

S&F in repair of fan clamp with nut & bolt and rubber bush suitable for ceiling fan of any sweep and make complete all as specified.

M&L for rewinding of ceiling fan motor of 1200 mm sweep of any make with super enameled copper wire of existing gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts and washers, split pins etc complete all as specified and as directed

S&F non metallic ventilating fan,250 mm sweep, 900 RPM, AC single phase,230 V including louvers and necessary connection with multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing complete all as specified and as directed . Make :- Bajaj /Havells/Crompton Greaves /Khaitan/Almonard as approved.

S&F ceiling fian white/Ivory in colour of 1200 mm sweep ,BEE 5 Star rating with all fittings including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose complete all as specified and as directed. Make :-Bajaj /Havells/Crompton Greaves /Khaitan/Almonard as approved.

S&F 25 liter capacity geyser,AC, single phase,230 Volt with and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose complete all as specified and as directed. Make :- Havells/Crompton Greaves /Khaitan/Almonard as approved.

M&L cutting opening through brick/stone wall built in cement mortar for fixing exhaust fan of 300/450 mm sweep and making good the disturbed surface in cement mortar 1:4 and applying two coats of white wash to match with the existing complete all as specified and as directed.

S&F in replacement of 9 Watt tube light fitting with lamp, Endura linear LED, wall mounted batten with polycarbonate housing and intigrated driver for efficient heat dissipation having THD<20% with complete including connection with two core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make:- Havells Cat part No LUMILINEBS9WLED865SPCWH or Bajaj Cat part No BCLSB 10WH as approved.

S&F in replacement of LED street light 25W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 and 32 mm dia galvanised iron pipe light grade bracket having 1.5 m length with suitable clamp with nuts and bolts for fixing complete all as specified and as directed . Make :- Bajaj Cat Part No.ENXT P 30L WH CR PC SD 25 W or Havells Cat Part No : VILUMINASL25WLED757SASYB as approved.

HARI HARA NAYAK

D RAVICHANDRAN