Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹7.9 Cr
EMD Value
₹7.9 L
Closing Date
20 Jun 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Package No. GAJ-001-AMA Repair and Renovation work under execution of AMA HOSPITAL projects in the facilities of DHH Paralakhemundi and CHC Chandragiri, in the Gajapati District of Odisha
NBCC/ODISHA/ZO/NHM/NIT/23-24/048
NBCC/ODISHA/ZO/NHM/NIT/23-24/048
Open Tender-Domestic
Civil Works General
Gajapati, Odisha
₹11,800
₹7.9 L
20 Jun 2023
9 Jun 2023
20 Jun 2023
20 Jun 2023
22 Jun 2023
Head Description of Item Unit Qnty. Rate Amount
"AMA HOSPITAL" projects in the facilities
of DHH Paralakhemundi
Providing 12 mm thick cement plaster with
cement mortar of mix (1:6) with screened and
washed sharp sand for mortar and finished
smooth to the rough surface of walls in all
heights after racking out joints including
watering and curing, rounding of corners,
providing grooves where ever necessary with
cost, conveyance, royalties and taxes of all
materials with cost of all labour, T&P, and
scaffolding required for the work etc. complete
in all respect as directed by the Engineer in
Providing 16 mm thick cement plaster with
cement mortar of mix (1:6) with screened and
washed sharp sand for mortar and finished
smooth to the rough surface of walls in all
heights after racking out joints including
watering and curing, rounding of corners,
providing grooves where ever necessary with
cost, conveyance, royalties and taxes of all
materials with cost of all labour, T&P, and
scaffolding required for the work etc. complete
in all respect as directed by the Engineer in
Providing 6 mm thick cement plaster with
cement mortar of mix (1:4) with screened and
washed sharp sand for mortar and finished
smooth to R.C.C. work after closed deep
chipping & slurry treatment including watering
and curing, rounding of corners, providing
grooves where ever necessary with cost,
conveyance, royalties and taxes of all
materials with cost of all labour, T&P, and
scaffolding required for the work etc. complete
in all respect as directed by the Engineer in
Finishing plastered surfaces of walls with
cement base wall putty of approved make and
finishing the surface smooth and even by sand
papering to receive paint in walls, at all
heights with staging wherever necessary with
cost, conveyance, taxes of all materials, cost
of all labour, all T&P etc. required for the work
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of Industrial vitrified
tiles (30x30)cm in floors of approved make
laid on 20 mm thick cement mortar (1:4) (1
22 19 cement : 4 course sand) and filling joints with 0 0.00 0.00 0.00
slurry including cost of all materials, labour
T&P etc required for the work all complete as
per direction of the Engineer-in-charge
Supply & Fixing of Prelaminated particle board
18MM (Novapan standard type)
26 22 (I.S.I.)including cost of materials all taxes 0 0.00 0.00 0.00
labour, T&P etc.complete as per direction of
Engineer-in-charge.
Supplying, fitting, fixing of 6mm thick black
glass as panel fitted with rubber beading
29 25 including locking arrangement including cost 0 0.00 0.00 0.00
of materials all taxes labour, T&P etc.complete
as per direction of Engineer-in-charge.
Supplying, fitting, fixing of 12mm thick
prelaminated particle board including cost of
materials all taxes labour, T&P etc.complete as
per direction of Engineer-in-charge.
Supplying fitting and fixing of stainless steel of
304 grade in hand railing using 50mm dia of
2mm thick circular pipe with balustrade of size
32mm x 32mm x 2mm @ 0.90 mtr C/C and
stainless square pipe bracing of size 32mm x
32mm x 2mm in 3 rows in staircase as per
approved design and specification buffing,
polysing etc with cost conveyance taxes of all
materials labour T&P require for the work
complete in respect.
Dismentling of ,berg,perlin including all etc
required to complete the work.
Dismentling of old door and window including
all etc required to complete the work
Supplying, fitting & fixing of 25mm thick GRC
Paver Block in floors of approved make laid on
20 mm thick cement mortar (1:4) (1 cement :
40 36 4 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P etc
required for the work all complete as per
direction of the Engineer-in-charge
Factory made 30mm/32mm flush door shutter
(nonsal hard wood framefixed with 4mm BWR
42 38 ply on both side of frame) with all labour, iron 0 0.00 0.00 0.00
fittings, and wooden hinged cleats etc fitted
and fixed complete in all respect
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing & Fixing of Acoustical Mineral Fibre
Board of RH-99 with microperforated,finely
granulated surface texture , beveled tegular
edge with 6mm Black Revealed exposed grid
Suspended False Ceiling System, with tiles of
Humidity Resistance (RH) of 99%, NRC Upto
0.5, αw value 0.6, CAC- 34dB ,Light
Reflectance >85%, thermal Conductivity k =
0.052- 0.057 w/m K, Colour White, Fire
Performance Class- 0/ Class -1 (BS476 Part
6&7) in module size of 600 X 600 X 16 mm
with Bio Block coating on the face of the tile,
suitable for Green Building application, with
Recycled content of 63%, fixed to G.I.grids of
system with 15mm white flanges incorporating
44 40 a 6mm central reveal in white/black colour 0 0.00 0.00 0.00
and with a web height of 38mm , having
stiches both perpedicular and horizontal to
make it stronger, and a load carrying capacity
of minimum 15.68 Kgs/Sqm. The Main
Runners & Cross Tees to have mitred ends &
“birdsmouth” notches to provide mitred
cruciform junctions. The T Sections have a
Galvanizing of 120 grams per SQM & passed
through 500 hrs of Salt test. The main G.I.
runner spaced at 1200mm centre to centre
securely fixed to the structural soffit using G.I.
suspension system at 1200mm maximum
centr to centre & not more than 150mm from
spliced joints. The First/Last suspension
system at the end of each main runner should
Painting two coats with approved weather seal
paints of approved colour, shade on wall
surface over a coat of wall primer including
46 42 sand papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances, taxes of all materials and cost of
all labour with T&P etc, complete as per
specification & direction of Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and installing uPVC- Casement
openable doors made out of lead free green
profiles of KÖMMERLING make with a
GREENLINE mark with frame dimension of
58mm x 69mm x 50mm for doors and sash
dimension of sash dimension of 58mm x
93mm x 54mm for doors with corners fusion
welded, fully reinforced with Galvanized steel
of 1.2 mm to 2 mm. The sash will be fitted
with 6mm clear glass (toughened). The
physical properties of the profiles like Vicat
softening temperature, density, tensile
strength, hardness, weatherability, impact
48 44 strength and Modulus of Elasticity should be 0 0.00 0.00 0.00
tested in accordance with ASTM/DIN-ISO
standards and the thermal conductivity as per
IS standards. The profile manufacturer should
be a certified member of IGBC and should
have extrusion facility in India and the
windows to be assembled and installed by an
authorised fabrication partner . The windows
must be installed complete with all kinds of
ironmongery (including EPDM gaskets,bridging
wedges and glass packers) and with suitable
water draining system. Application of Silicon
sealant from Inside / Outside of Dowcorning /
GE or equivalent.
Painting two coats to new Iron work with
approved enamel paints of approved colour,
shade including sand papering, polishing the
50 46 surface, cost, conveyances, taxes of all 0 0.00 0.00 0.00
materials and cost of all labour with T&P etc,
complete as per specification & direction of
Engineer-in-charge.
Finishing plastered surfaces of walls with
cement base wall putty of approved make and
finishing the surface smooth and even by sand
papering to receive paint in walls, at all
heights with staging wherever necessary with
cost, conveyance, taxes of all materials, cost
of all labour, all T&P etc. required for the work
Priming one coat wall primer make an even
finished surface in all floors and heights to wall
surface of approved make and shade including
60 56 sand papering, applying putty wherever 0 0.00 0.00 0.00
necessary & cost of scaffolding, staging
charges with cost, conveyance, taxes of all
materials, cost of all labour, T&P etc. complete
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Wall painting with plastic emulsion paint for
two coat with any approved paint wherever
65 61 necessary with cost, conveyance, taxes of all 0 0.00 0.00 0.00
materials, cost of all labour, all T&P etc.
Painting two coats with approved weather seal
paints of approved colour, shade on wall
surface over a coat of wall primer including
70 66 sand papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances, taxes of all materials and cost of
all labour with T&P etc, complete as per
specification & direction of Engineer-in-charge.
75 71 Gate(two) nos and Parking 0 0.00 0.00 0.00
Earth work excavation of foundation in all
76 72 kinds of soil including all etc required to Cum 418.95 244.02 1,02,233.47
complete the work.
Supplying sand filling in foundation with well
77 73 watering with all etc required to complete the Cum 204.32 527.70 1,07,820.20
CC (1:3:6) using 40mm size cbhg metal of
78 74 approved quality with well watering with all Cum 131.67 5895.99 7,76,296.73
etc to complete the work.
CC (1:2:4) using 12mm size cbhg chips of
79 75 approved quality with well watering with all Cum 67.67 7586.46 5,13,392.12
etc to complete the work.
RCC (1:1.5:3) using 12mm size cbhg chips of
80 76 approved quality with well watering with all 0 0.00 0.00 0.00
etc to complete the work.
Fly ash brick masonry(1:6) with well watering
with all etc required to complete the work.
Supplying and Fixing of M.S. Grills, M.S.Doors,
M.S. Gate etc including cost,conveyance of all
89 85 materials,priming,and labour for fitting fixing kg 3304.00 83.43 2,75,639.50
etc.complete as per the instruction of Engineer-
Supplying corrosion resistance steel including
cutting ,bending,binding in proper position
including all etc required to complete the
12MM thick cement plaster (1:6) OVER BRICK
91 87 MASONRY with well watering including all etc sqm 121.80669 174.17 21,214.83
required to completete the work.
Dismentling of Brick masonry for opening
92 88 including all etc required to completete the cum 7.9047619 1370.81 10,835.94
Dismentling of cement concrete for opening of
93 89 including all etc required to completete the cum 168.22562 171.76 28,895.00
Applying two coats with WEATHER paint over
94 90 a coat of primer including all etc required to sqm 641.82156 100.30 64,374.70
complete the work.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying fitting and fixing of black
/blue/brown granite tile of approved qualite
95 91 for main gate including all etc required to sqm 93.866171 3232.96 3,03,465.95
complete the work as per the instruction of
Engineer in charge.
Supplying fitting and fixing of square steel
pipe gate of approved qualite for main gate
including all etc required to complete the work
as per the instruction of Engineer in charge.
Supplying fitting and fixing of industrial floor
97 93 tile (300mmx300mm) size of approved quality sqm 418.21561 1164.31 4,86,930.95
including all etcrequired to complete the work
Applying two coats with enamel paint to wood
98 94 and iron door and window with grill with all etc sqm 92.264638 189.74 17,506.66
to complete the work.
Supplying fitting and fixing of vetrified tile
99 95 (600x 600) mm of approved quality including sqm 46.096654 1264.37 58,283.23
all etc required to complete the work.
Supplying fitting and fixing of wall tile (600x
100 96 300) mm of approved quality including all etc sqm 23.791822 1112.86 26,476.92
required to complete the work.
Providing corrugated G.S. sheet roofing
including vertical / curved surface fixed with
polymer coated J or L hooks, bolts and nuts 8
mm diameter with bitumen and G.I. limpet
washers or with G.I. limpet washers filled with
white lead, including a coat of approved steel
primer and two coats of approved paint on
overlapping of sheets complete (up to any
pitch in horizontal/ vertical or curved
surfaces), excluding the cost of purlins, rafters
and trusses and including cutting to size and
shape wherever required
Providing and fixing 15 cm wide, 45 cm overall
semi-circular plain G.S. sheet gutter with iron
102 98 brackets 40x3mm size, bolts, nuts and 0 0 0.00 0.00
washers etc., including making necessary
connections with rain water pipes complete.
0.80 mm thick with zinc coating not less than
Extra for providing and fixing wind ties of 40x
6 mm flat iron section.
Providing and fixing precoated galvanised iron
profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-
charge) 0.50 mm (+ 0.05 %) total coated
thickness with zinc coating 120 grams per sqm
as per IS: 277, in 240 mpa steel grade, 5-7
microns epoxy primer on both side of the
sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25
105 101 microns minimum to avoid scratches during sqm 418.0602 792.43 3,31,283.03
transportation and should be supplied in single
length upto 12 metre or as desired by
Engineer in-charge. The sheet shall be fixed
using self drilling /self tapping screws of size
(5.5x 55 mm) with EPDM seal, complete upto
any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins, rafters
and trusses and including cutting to size and
shape wherever required
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing precoated galvanised steel
sheet roofing accessories 0.50 mm (+0.05 %)
total coated thickness, Zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side
of the sheet and polyester top coat 15-18
microns using self drilling/ self tapping screws
Supplying fitting and fixing of MS square pipe
107 103 and perlin in Veccine front shredder including kg 14070.903 83.43 11,73,879.17
all etc required to complete the work.
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift and
stacking the soil upto a lead of 100 metre and
including dewatering, removing slush, shoring
and strutting (as required), complete as per
specification and as directed by the Engineer-
Filling in foundation trenches and plinth, with
well gravelled sand including laying the earth
in layers not exceeding 23.5 cm thick ramming
& watering with all leads & lifts including cost
of all labour,T&P completed as directed by the
Engineer-in-charge.
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
111 107 40mm nominal size) as levelling course in Cum 47.61 5895.99 2,80,681.78
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement : 2 sand : 4 stone agregate
112 108 12mm nominal size) as levelling course in Cum 3.93 7586.46 29,795.49
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
113 109 cement : 6 fine sand) including necessary Sqm 23.42 174.17 4,079.03
scaffolding, curing etc. all complete at all
floors and all heights.
Supplying fitting and fixing of granite tile of
114 110 approved quality including all etc required to Sqm 87.09 3232.96 2,81,558.83
complete the work.
Supplying, fitting & fixing of 30cm x 20cm
Ceramic wall tiles of premium grade having
thickness 6.5mm to 6.7mm confirming to IS
13753 in dadoes, skirting and risers of steps
laid on 12 mm thick cement mortar (1:3) (1
115 111 cement : 3 course sand) jointed with slurry Sqm 18.58 1112.86 20,676.82
mixed with pigment to match the shades of
the tiles etc. complete including cost of all
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Stainless steel
of 304 grade in hand ralling using 50mm dia
of 2mm thick circular pipe with Balustrade of
size 32mm X 32mm X 2mm @ 0.90mtr. C/C
and stainless square pipe bracing of size
32mm X 32mm X 2mm in 3 rows in stair case
as per approved design and specification,
buffing, polishing etc with cost, conveyance,
taxes, all materials, labour, T&P etc. required
for the complete in all respect.
Earth work in excavation of foundation inall
kinds of soil with all lead and lift including
118 114 dressing and leveling the bed and depositing Cum 48.71 244.02 11,886.41
the excavated materials with all cost,
conveyance etc. complete.
Supplying and filling foundation and plinth
with sand, well watered and rammed including
all cost, conveyance, royalty, taxes etc.
CC (1:3:6) in foundaton and floor using hard
Fly Ash Brick in Cement Motor (1:6) in
Foundation & Plinth etc complete.
R C C M-25 grade with 20mm and down
122 118 graded size CBHG chips including hoisting and 0.00 0.00 0.00 0.00
laying, watering etc complete
Fly Ash Brick in Cement Motor (1:6) in
Superstructure etc complete.
12mm thick cement plaster in cement mortar
(1:6) etc complete.
16mm thick cement plaster in cement mortar
(1:6) etc complete.
Painting two coats to new Iron work with
129 125 approved enamel paints of approved coloured Sqm 68.04 189.74 12,910.18
Painting two coats with approved weather seal
130 126 paints of approved colour, shade on wall Sqm 727.91 100.30 73,009.37
surface etc comeplete
Priming one coat with approved Water Bound
131 127 Wall cement Primer on Plastered Surface in Sqm 727.93 81.07 59,010.08
Strengthening, cutting,bending binding of
steel etc complete
Supplying fitting and fixing of grill in boundary
133 129 of square bar of approved quality including all Qntl 697.03 83.43 58,150.09
etc required to complete the work.
134 130 Repair of Water proofing treatment 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade as
per approved designs and drawings having a
minimum compressive strength (in work test)
250 Kg. / Square cm. in 15 cm. cubes at 28
days after mixing and test conducted in
accordance with I.S. 516 using 12 mm. to 20
mm. size black hard crushed broken granite
stone chips and screened and washed sharp
sand for mortar of approved quality from
approved quarry, washed and cleaned (
20mm. size chips not to exceeds 25 % ) to be
mixed in concrete mixture with Portland slag
cement (PSC) including hoisting, lowering,
laying and compaction concrete by using
vibrators, watering and curing for 28 days,
centering and shuttering then after
dismantling and removing debris from the
work site and finishing the exposed surface
smooth providing grooves or beads wherever
necessary including cost, conveyance, loading,
unloading, royalties and taxes of all materials
and cost of all labours, sundries, T & P
required of the work etc. complete in all
respect as directed by the Engineer-in-Charge.
But excluding cost and conveyance of M.S.
rods or Tor steel and binding wires and labour
charges for straightening, cutting, bending
etc. of M.S. rods or tor steel tying the grills
and placing in proper position.
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL (VIZAG)
make including bending, binding, welding and
joining if necessary and tying the grills and
placing in position as required for R.C.C. Work
and for providing fan hooks as required,
hoisting, lowering, laying including cost,
conveyances, taxes of M.S. Rod or tor steel
and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight of
B.I.S. for M.S. Rods or tor steel only. Wastage
if any, including weight of binding wire will not
be considered for measurement) etc. complete
as per specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
143 139 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
145 141 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
cement mortar of mix 1:4 (1 cement : 4
coarse sand) including necessary scaffolding,
curing etc. all complete at all floors and all
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
granite crusher broken chips on new work in
Earth work in excavation of foundation inall
kinds of soil with all lead and lift including
152 148 dressing and leveling the bed and depositing Cum 59.98 244.02 14,636.56
the excavated materials with all cost,
conveyance etc. complete.
Supplying and filling foundation and plinth
with sand, well watered and rammed including
all cost, conveyance, royalty, taxes etc.
CC (1:3:6) in foundaton and floor using hard
Fly Ash Brick in Cement Motor (1:6) in
Foundation & Plinth etc complete.
R C C M-25 grade with 20mm and down
156 152 graded size CBHG chips including hoisting and 0.00 0.00 0.00 0.00
laying, watering etc complete
Fly Ash Brick in Cement Motor (1:6) in
Superstructure etc complete.
12mm thick cement plaster in cement mortar
(1:6) etc complete.
16mm thick cement plaster in cement mortar
(1:6) etc complete.
Painting two coats to new Iron work with
166 162 approved enamel paints of approved coloured Sqm 16.37 189.74 3,106.11
Painting two coats with approved weather seal
167 163 paints of approved colour, shade on wall Sqm 148.27 100.30 14,871.48
surface etc comeplete
Priming one coat with approved Water Bound
168 164 Wall cement Primer on Plastered Surface in Sqm 513.27 81.07 41,608.75
Strengthening, cutting,bending binding of
steel etc complete
Supplying fitting and fixing of grill in boundary
170 166 of square bar of approved quality including all Kg 503.53 83.43 42,007.49
etc required to complete the work.
171 167 Waste Management 0 0.00 0.00 0.00
Earth work in excavation of foundation inall
kinds of soil with all lead and lift including
172 168 dressing and leveling the bed and depositing Cum 59.98 244.02 14,636.56
the excavated materials with all cost,
conveyance etc. complete.
Supplying and filling foundation and plinth
with sand, well watered and rammed including
all cost, conveyance, royalty, taxes etc.
CC (1:3:6) in foundaton and floor using hard
Fly Ash Brick in Cement Motor (1:6) in
Foundation & Plinth etc complete.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
R C C M-25 grade with 20mm and down
176 172 graded size CBHG chips including hoisting and 0 0.00 0.00 0.00
laying, watering etc complete
Fly Ash Brick in Cement Motor (1:6) in
Superstructure etc complete.
12mm thick cement plaster in cement mortar
(1:6) etc complete.
16mm thick cement plaster in cement mortar
(1:6) etc complete.
Painting two coats to new Iron work with
186 182 approved enamel paints of approved coloured Sqm 16.37 189.74 3,106.11
Painting two coats with approved weather seal
187 183 paints of approved colour, shade on wall Sqm 148.27 100.30 14,871.48
surface etc comeplete
Priming one coat with approved Water Bound
188 184 Wall cement Primer on Plastered Surface in Sqm 513.27 81.07 41,608.75
Strengthening, cutting,bending binding of
steel etc complete
Supplying fitting and fixing of grill in boundary
190 186 of square bar of approved quality including all Qntl 203.53 83.43 16,979.83
etc required to complete the work.
191 187 C.C ROAD ,S/F OF PAVER BLOCK 0.00 0.00 0.00 0.00
Earth work in excavation of foundation inall
kinds of soil with all lead and lift including
192 188 dressing and leveling the bed and depositing Cum 440.69 244.02 1,07,538.94
the excavated materials with all cost,
conveyance etc. complete.
Supplying and filling foundation and plinth
with sand, well watered and rammed including
all cost, conveyance, royalty, taxes etc.
CC (1:3:6) in foundaton and floor using hard
Fly Ash Brick in Cement Motor (1:6) in
Foundation & Plinth etc complete.
P C C (1:2:4) grade with 20mm and down
196 192 graded size CBHG chips including hoisting and Cum 54.40 7586.46 4,12,703.21
laying, watering etc complete
Supplying fitting and fixing of paver block of
197 193 approved quality including all etc required to sqm 1470.11 1020.70 15,00,541.28
complete the work.
12mm thick cement plaster in cement mortar
(1:6) etc complete.
199 195 Sub-Total of Civil Works 0 0.00 0.00 2,43,54,266.83
200 1 Plumbing Works 0 0.00 0.00 0.00
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to
IS:15778, having thermal stability for hot &
cold water supply, including all CPVC plain &
201 2 brass threaded fittings including fixing the pipe 0.00 0.00 0.00 0.00
with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete
as per direction of Engineer-in-Charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
GI/PVC pipes, class-IV (10 k.g. F/cm) on
firming I.S.4985 of the following nominal bore,
tube fittings and clamps including making
good the wall, ceiling and floor, testing all
complete as per specification and direction of
the Engineer in charge.
207 8 20mm dia PVC ASTM pipe (sch-80) Mtrs. 40.00 161.66 6,466.40
208 9 25mm dia PVC ASTM pipe (sch-80) Mtrs. 80.00 221.96 17,756.64
209 10 32mm dia PVC ASTM pipe (sch-80) Mtrs. 140.00 291.70 40,837.44
210 11 40mm dia PVC ASTM pipe (sch-80) Mtrs. 160 383.50 61,360.00
Supplying all materials, labour T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all joiniting
211 12 materials including cost & conveyance of all 0 0.00 0.00 0.00
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Con-CHR-
053KN Jaquar make)
15mm dia CP two in one bib cock (Con-CHR-
041KN Jaquar make)
214 15 15 mm dia CP S.B. Bib cock(CON-CHR-037KN) Each 20.00 1277.70 25,554.08
15mm dia CP Long Body Bib cock (Con-CHR-
107KN Jaquar make)
20mm dia CP consealed stop cock(Con-CHR-
083KN Jaquar make)
217 18 25mm dia brass full way valve (Shakti make) Each 10.00 1095.28 10,952.76
218 19 32mm dia brass full way valve (Shakti make) Each 10.00 1603.50 16,035.02
219 20 40mm dia brass full way valve (Shakti make) Each 10.00 2035.85 20,358.54
15mm dia CP Health faucet (Con-ALD-MCH-
573 Jaquar make)
221 22 15mm CP Extension piece Each 180.00 69.97 12,595.32
Supplying all materials , labour, T&P and fixing
rotational moulded polyethylene cylindrical
vertical water storage tanks conforming to
IS:12701/1996 including cutting holes through
the tank and fixing mild steel tubes and
fittings and providing extra sockets and jam
nuts, fixing ball valve etc. including hoisting
upto a height of 5 metres above ground level
and placing the tank to the required position
and providing 5.40 mtr. lengthx0.25 mtr width
KB brickwork in cement mortar (1:6) of
0.46m height in staging and 0.13mtr thick
circular protection wall of 0.46mtr height to
224 25 support the tank,12mm thick cement plaster 0.00 0.00 0.00 0.00
in cement mortar (1:6) over brick work, RCC
slab of size 1.60mX1.60m and 0.10m thick
,RCC beam of 0.25mx0.30m and 3.40m
average length in cement concrete (1:2:4)
using 12mm size crusher broken hard black
granite chips and required steel reinforcement
including centering and
shuttering,watering,curing ,cost of all
materials,conveyance of all materials to
worksite , payment of royalty, all taxes etc.all
complete as per approved drawing , P.H.
specification and direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
225 26 2000 liters capacity PVC water storage tank Each 10.00 42437.76 4,24,377.56
supplying all materials, labour, T&P and
cutting holes through existing brick work
including making good the damages in cement
mortar (1:4) for taking G.I. Pipes and fittings/
226 27 P.V.C. pipes and fittings including watering, 0.00 0.00 0.00 0.00
curing, cost & conveyance of all materials to
worksite, payment of royality, taxes etc. all
complete as per direction of Engineer-in-
Supplying all materials , labour, T&P and
cutting holes in RCC floors and roofs upto
19cm thick for passing P.V.C pipes and G.I
fittings etc. , and repairing the holes after
insertion of pipe etc. with cement concrete
(1:2:4) including finishing complete so as to
make it leak-proof as per P.H. specification
and direction of Engineer-in-charge
Supplying all materials, labour, T&P and
cutting grooves in pucca floors and walls for
taking G.I./P.V.C. pipes and making good the
230 31 damages including watering , curing , cost & 0.00 0.00 0.00 0.00
conveyance of all materials to worksite,
payment of royality, taxes etc all complete as
per direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and fitting
and fixing U-PVC SWR soil waste ventilating
pipes and fittings of the following outside
diameter conforming to ISI No 13592/1992 to
walls with nails, bobbins and wooden plugs or
laying in trenches including jointing with
supply of approved rubber lubricant by non-
heat application method/as per manufacturer's
specification, testing, earthwork in excavation
in all kinds of soil and refilling of trenches ,
cost & conveyance of all materials to worksite,
payment of taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
233 34 110mm U-PVC SWR Pipe (Supreme /Ashirvad) Mtr. 200.00 541.38 1,08,276.80
110mm U-PVC ‘P’ Trap(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC door bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC offset without ear(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Cowl(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC S/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC D/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Door tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Socket(Ori
Plast/Finolex/Supreme Make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing
vitreous china water closet, squatting pan
(Indian type W.C pan/Orissa pattern squatting
pan) duly embedded in cement concrete
(1:5:10) using 4cm size hard granite metal
including fixing a pair of vitreous china
250mm x 130mm x30mm footrest, fixing
100mm dia HCI 'p' or 's' trap (with/without
50mm dia horn) for water colset squatting pan
including jointing the trap with pan in cement
mortar (1:1) cutting the floor and mending
good the damages , cost & conveyance of all
materials to worksite, payment of royality ,
taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
580mm size Orissa pan
(Hindware/Parryware/Neycer make)
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or M.S.
brackets complete with fittings such as
siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP
brass handle,unions and couplings for
connection with inlet, outlet and overflow
246 47 pipes, 32mm dia CP long flush bend, 15mm 0 0.00 0.00 0.00
dia pvc inlet connection pipe including cutting
holes and making good the same and
connecting the flush bend with cistern and
closet and connceting the inlet pipe with
suupply main , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm.
247 48 Dia CP long flush bend ( Slimline-white- Each 35.00 1853.07 64,857.52
Parryware make )
Supplying all materials, labour, T&P and fixing
the following vitreous china Wash Down Water
Closet(European type W.C. pan)with integral
'p' or 's' trap to the floor with wooden plug and
chromium plated pedestal screws including
jointing the trap with soil pipe in cement
248 49 mortar (1:1) fixing plastic seat and cover for 0 0.00 0.00 0.00
wash down water closet with chromium plated
brass hinges and rubber buffers including
polishing , cost & conveyance of all materials
to worksite, payment of royality, taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
European water closet with 'p' trap
plain(Hindware /Parryware /Neycer make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs, screws
and cement etc, fixing pedestal for wash basin
recessed at the back for the reception of pipes
and fittings, fixing PVC waste pipe of 32mm
nominal diameter for wash basin including
brass check nut complete, fixing pillar taps
capstan head screw down high pressure
lettered 'Hot' and 'Cold' with long screws,
shanks and back nuts of 15mm dia nominal
bore, fixing 15mm dia PVC inlet connection
pipe and making connection with pillar cocks
and supply mains for wash basin, fixing 32mm
dia CP brass waste, cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as perP.H specification and
direction of the Engineer-in-charge
550mmx400mm W.H.basin
(Hindware/Parryware/Neycer make)with
251 52 15mm dia C.P.pillar cock (Plaza make) with Each 30.00 4636.10 1,39,083.06
Supplying all materials, labour, T&P for fitting
& fixing plain edge kitchen/wall sink of all
standard sizes with a pair of bracket, C.P.
252 53 waste, trap & P.V.C. waste pipe & painting Each 4.00 5843.48 23,373.91
brackets including supply of cement concrete
& mortar etc. all complete. 24” x 18” x 10”
Supplying all materials, labour, T&P and fixing
standard sized CP towel rail complete with CP
253 54 brass brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of the
Engineer in charge
254 55 25mmx600mm long CP towel rail Each 20.00 827.65 16,553.04
Supplying all materials, labour, T&P and fixing
standard sized glass-shelf with CP brass
brackets and guard rail complete fixed to
wooden plugs with CP screws as per
specification and direction of Engineer in
600mmx125mm plate glass shelf with CP/NP
Supplying all materials, labour, T&P and fixing
mirror of superior glass mounted on
6mm.thick A.C. sheet or ply wood sheet and
fixed to wooden plugs with CP screws and
washers complete as per specification and
direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled
Supplying all materials, labour, T&P and fixing
CP soap holder complete with CP brass
260 61 brackets fixed to wooden plugs with CP screws 0 0.00 0.00 0.00
as per specification and direction of the
Engineer in charge
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red
lead and yarn nail complete as per direction of
Engineer in charge.
263 64 ½” x 5” CP Shower (Plaza Deluxe Make) Each 20.00 570.53 11,410.60
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and
cutting holes through existing brick or laterite
masonry wall for taking U-PVC pipes and
fittings including making good the damages
etc. all complete as per P.H. specification and
direction of Engineer-in-charge
Supplying all materials , labour, T&P and
cutting of RCC chajja for taking HCI or U-PVC
pipe and fittings including making good the
damages etc. all complete as per P.H.
specification and direction of Engineer-in-
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside
size 760mmx760mmx460mm with cement
concrete (1:3:6) using 40mm size crusher
broken hard black granite metal on bed , KB
brick work in cement mortar (1:6) in
foundation and plinth, moulding and shaping
the channel inside and benching with cement
concrete (1:2:4) using 12mm size crusher
broken hard black granite chips, 12mm thick
cement plaster (1:3) with cement punning to
inside, cement flush pointing (1:3) to outside,
R.C.C cover slab (1:2:4) using 12mm size
crusher broken hard black granite chips with
R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc.all complete
as per approved drawing, P.H specification
and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast
cover slab in cement concrete (1:2:4) mix
using 12mm size crusher broken HG chips,
foundation concrete (1:4:8) using 40mm size
crusher broken HG metal on bed and around
268 69 trap, KB brick work in cement mortar (1:6) in Each 15.00 1719.97 25,799.52
foundation and plinth and inside 12mm thick
cement plastering (1:3) finished with a
floating coat of neat cement including fixing
100mmx100mm size HCI gully trap,
150mmX150mm size CI grating etc.all
complete as per drawing, specification and
direction of Engineer-in-charge
Supplying all materials labour T&P filling sand
in lavatories well watered and rammed
including lead of materials to work site.210 x
Supplying all materials, labour, T&P and
providing cement concrete ( 1:3:6 ) with
40mm size crusher broken hard black granite
metal including watering, curing,cost of all
materials, conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge. 210 x 0.10
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with
12mm size crusher broken hard black granite
chips including watering, curing,cost of all
materials, conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge
Supplying, fitting and fixing of Antiskid
Ceramic Floor Tiles in flooring using special
plain / printed series Ceramic Floor Tile of
premium grade ( having minimum thickness 7
mm to 8 mm & size 300 mm x 300 mm,
confirming to I.S 13755 of approved quality
and shade in floors, treads on steps and
landings on 20 m.m thick bed of cement
mortar of mix (1:4) laid in proper slope and
gradient with screened & washed sharp river
sand for mortar and fixing with neat white
cement slurry,grouting the joints with neat
white cement slurry mixed with required
quantities of pigments (Tiles are to be
immersed in the water for required time
before use) of approved make to match the
shades of the Ceramic Floor Tiles if required
including cost, conveyance, loading,
unloading, stacking, royalties , all taxes, cost
of all Labour, Labour cess ,Sundries, T&P
required for the work , Watering , Curing for
required days , cleaning the flooring space
manually etc. complete in all respect as
directed by the Engineer-in-charge.
273 74 Kajaria/Somany/Johnson tile 60cmx60cm 0 0.00 0.00 0.00
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:4) on
brick work including watering,curing,cost of all
275 76 materials, conveyance of all materials to 0 0.00 0.00 0.00
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in
dado skirting on 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
277 78 site , payment of royalty, all taxes etc all 0 0.00 0.00 0.00
complete as per P.W.D specification and
direction of Engineer-in-charge( ceramic wall
tiles of premium grade having thickness
6.5mm to 6.7mm conforming to IS 13753 of
size Kajaria/Somany/Johnson tile 60cmx30cm
special plain / printed series to be pre-
approved by the Engineer-in-charge )
278 79 Kajaria/Somany/Johnson tile 60cmx30cm 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Factory made single leaf Solid WPC (Wood
polymer) composite door shutter of 25mm
thickcompacted with wood grain finish
structural foam panel of 29mm thickness and
a density of 20kg/cu.mtr shall be used as core
material for fitting the metal fittings such as
tower bolts, aldrops, handles etc shall be
provided. A structural adhesive compatible
with (EPS) foam shall be used for bending the
core material, The material and process for
280 81 manufacturing the door shutters shall conform sqm 32.50 4048.11 1,31,563.51
to RV-TIFAC composites Design Centre's
standards and specifications and the door
shutters Conforming to relevant
I.S.specification. The finish of door shutter will
be plain colour white/ Ivory/ Beige/ Light
grey/ Mahogany/ Teak wood or any other
colour using high quality pigments. Three
heavy whight mild steel butt hinges type-I(ISI
marked) size 100mm are to be fitted on one
side of shutter.
Factory made Solid WPC door frame of size
95mmx55mm fabricated .The door frame
consist of four segments which are provided
with plug-in-socket arrangement in-situ in the
mould. The segments are plugged in and are
joined together by means of screw. The WPC
frame shall be provided with The material and
process for manufacturing the door frames
shall conform to Relavent I.S.specification.
The finish of door frame will be plain colour
white/ Ivory/ Beige/ Light grey/ Golden
brown/Mahogany/ Teak wood/sand
stone/Champagne/Pastel blue or any other
colour using high quality pigments complete
in all respect as per specification and direction
of the Engineer in charge
Supplying all materials, labour, T&P and
providing fitting and fixing (Aqua guard) pure
chill 80 PSS UV of size 750 x 570 x 1350mm
hight with water storage capacity 80 liter's
282 83 along with 2 noa of faucets 1 for cold water 0 0.00 0.00 0.00
and 1 for normal water including a flow of 1.5
ltr per munite etc all complete as per approved
drawing , specification and direction of the
Engineer in charge
283 84 Aqua guard pure Chill 80 PSS UV Each 2.00 102635.22 2,05,270.44
Supplying all materials, labour, T&P and laying
in trenches (to level or slope) unplasticized
P.V.C. pipe conforming to IS 4985/2000 of the
following out side dia for class- 3 (0.60mpa )
including jointing with supply of approved
solvent cement by non-heat application
method/as per manufacture's specification,
provoding and laying in trench cement
concrete (1:4:8) with 40mm size hard granite
metal in the type C-1 standard bedding
surrounding or encasing including concrete for
bedding and curing etc all complete as per
P.H. specification and direction of the Engineer
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials labor T&P and
constructing MH chamber of sizes earth work
in excavation in all kinds of soil CC(1:1:8) with
black granite chips size 46mm brick work with
K.B. brick having crossing strength not less
than 75 Kg /CM2 to 90 Kg/CM2s in
CM(1:6)12mm C.P(1:8) inside MH chamber
over benching with cement slush pointing
287 88 (1:3)outside the MH chamber providing 0 0.00 0.00 0.00
painting MS or CI step iron RCC(roof of slab
with CC(1:2:4)with black granite chips size
12mm bending binding tying the grills placing
of the reinforcement providing RCC color of
required size refilling the cavity around the MH
chamber with excavated earth including
channeling the bed of MH etc all complete as
per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18” dia
Supplying all materials labour T&P and
constructing 1.20m dia x 2.00 m deep soak
way pit with dry brick having crossing strength
not less than 75Kg/CM2 to 99Kg/CM2 in
CM(1:6) for the remaining 0.4572mm height
of wall at top CC(1:3)inside and outside inside
fill with dry brick khoa size 38mm ,CM thick
289 90 RCC perforated slab to a height of 1.9012m Each 2.00 19544.46 39,088.92
from bottom covered by means of 50mmthick
RCC wall cover in pieces filled with iron plugs
including earth work in excavation refilling of
cavity around the pit and painting the iron
works complete as per PHD design and
specification including carriage of all materials
290 91 Rain Water Harvesting 0 0.00 0.00 0.00
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
granite crusher broken chips on new work in
Providing, Fitting & Fixing of 110mm dia PVC
Rain water pipe with cost, conveyance,
royalties of all materials with cost of all
labour,labour cess, and T&P required for the
work etc. complete in all respect as directed
by the Engineer in charge.
Repair and renovation of drain with precast
Earth work in excavation of foundation inall
kinds of soil with all lead and lift including
294 95 dressing and leveling the bed and depositing Cum 70.05 244.02 17,093.88
the excavated materials with all cost,
conveyance etc. complete.
Supplying and filling foundation and plinth
with sand, well watered and rammed including
all cost, conveyance, royalty, taxes etc.
CC (1:3:6) in foundaton and floor using hard
Fly Ash Brick in Cement Motor (1:6) in
Foundation & Plinth etc complete.
CC M30 grade with 12MM to 20mm and down
298 99 graded size CBHG chips including hoisting and Cum 30.33 6549.94 1,98,659.80
laying, watering etc complete
R C C M-25 grade with 20mm and down
299 100 graded size CBHG chips including hoisting and 0 0.00 0.00 0.00
laying, watering etc complete
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
301 102 Drain slab near Eye ward Cum 97.33 1115.69 1,08,590.11
Fly Ash Brick in Cement Motor (1:6) in
Superstructure etc complete.
12mm thick cement plaster in cement mortar
(1:6) etc complete.
16mm thick cement plaster in cement mortar
(1:6) etc complete.
Painting two coats to new Iron work with
306 107 approved enamel paints of approved coloured Sqm 12.40 189.74 2,352.83
Painting two coats with approved weather seal
307 108 paints of approved colour, shade on wall Sqm 390.18 100.30 39,135.05
surface etc comeplete
Priming one coat with approved Water Bound
308 109 Wall cement Primer on Plastered Surface in Sqm 390.18 81.07 31,630.33
Strengthening, cutting,bending binding of
steel etc complete
Supplying fitting and fixing of grill in boundary
310 111 of square bar of approved quality including all Qntl. 278.81 83.43 23,260.04
etc required to complete the work.
Applying two coats with enamel paint to iron
311 112 grill over a coat of primer including alletc Sqm 45.31 168.98 7,655.74
required to complete the work.
312 113 Sub-Total of Plumbing Works 0 0.00 0.00 61,54,736.27
313 1 Electrical Works 0 0.00 0.00 0.00
314 2 INTERNAL ELECTRICAL WORK 0 0.00 0.00 0.00
Recessed wirring to light point/ fan point/
exhaust fan point/ call bell point with 1.5
sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked Make-
Finolex/Anchor/Polycab/HAVELLS/RR
KABLE/KEI or equievalant reputed make A
catagory ISI marked as approved with 20 mm
dia PVC flexible non metallic conduit FRLS
type ISI marked Make-AKG/Anchor/Havells or
equievalant reputed make A catagory ISI
marked as approved 6A modular type (anti
bactorial & flame retradant type) switch ISI
marked Make-Schneider/legrand/Panasonic or
equievalant reputed make & model A catagory
ISI marked as approved, and ceiling rose ISI
marked Make- Anchor/Havells of modular
type G.I box with metallic cover plate (both
side) (anti bactorial & flame retradant type)
Make-Schneider/legrand /Panasonic or
equievalant reputed make & model A catagory
ISI marked as approved of suitable size,
modular box with 1.5 sq. Mm FRLSH PVC
insulated single core multistandard copper
conductor as earth wire including all
accessories and connection as per direction of
Engineer -in -Charge. CATAGORY AS
FOLLOWS ,complete suitable for IPH standard
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked
Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm dia
PVC flexible non metallic conduit FRLS type
ISI marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI
marked as approved with 6A modular
type((anti bactorial & falme retradant type))
switch ISI marked Make-Schneider/legrand
/Panasonic or equievalant reputed make &
319 7 model A catagory ISI marked as approved, Nos 50.00 1211.86 60,593.00
and ceiling rose ISI marked Make-
Schneider/legrand/Panasonic or equievalant
reputed make & model A catagory ISI marked
as approved of modular type G.I box with
metallic cover plate (both side)(anti bactorial
& falme retradant type) Make-
Schneider/legrand /Panasonic or equievalant
reputed make & model A catagory ISI marked
as approved, of suitable size, modular box
with 1.5 sq. Mm FRLS PVC insulated single
core multistandard copper conductor as earth
wire including all accessories and connection
as per direction of Engineer -in -Charge.
CATAGORY AS FOLLOWS ,complete suitable
for IPH standard hospital.(Maximum 02 nos
Supplying ,fixing of 6A Plug on the same
board in existing switch board with complete
fitting by 01 no of 6A switch & socket
(modular type)( (anti bactorial & flame
retradant type)) & other required accessories
of ISI marked as approved as per direction of
Engg. -in -Charge. Make-
Schneider/legrand/Panasonic or equievalant
reputed make & model A catagory ISI marked
as approved, complete suitable for IPH
standard hospital.(Maximum 02 nos point in
one circuit).All the switches & sockets should
be warrantied for a replacement period of 2
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( (anti bactorial
& flame retradant type)) with suitable size
modular box & cover(anti bactorial & falme
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
make & model ISI marked as approved ,
complete suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a period of 10 years against
manufacturing defects against which ncessary
test report & Warrnaty certificate to be
submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01 no
of 16A switch & socket(modular type)((anti
bactorial & flame retradant type)) with
suitable size modular box & cover(anti
322 10 bactorial & falme retradant type) including Nos 45.00 761.10 34,249.50
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge.. Make-Schneider/legrand/Panasonic
or equievalant reputed make A catagory ISI
marked as approved, (For equipement power)
Supplying,fixing of 2x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no
of 16A+2 no 6A switch & socket(modular
type) ( (anti bactorial & falme retradant type)
with suitable size modular box & metallic cover
plate (both side)(anti bactorial & falme
retradant type)including supplying of all
323 11 required accessories of ISI marked as Nos 21.00 1629.58 34,221.18
approved as per direction of engg-in-
charge..Make-Schneider/legrand /Panasonicor
equievalant reputed make & model A catagory
ISI marked as approved, (For equipement
power)complete suitable for IPH standard
hospital.(Maximum 02 nos point in one
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 3x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no
of 16A+3 nos 6A switch & socket(modular
type) ( (anti bactorial & falme retradant type)
with suitable size modular box & metallic cover
plate (both side)(anti bactorial & falme
retradant type)including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider/legrand /Panasonic or
324 12 equievalant reputed make & model A catagory Nos 10.00 2323.42 23,234.20
ISI marked as approved, (For equipement
power)complete suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within warranty
period for acceptance of materials.
Receass wiring for circuit/submain wiring with
the following mentioned size PVC FRLSH/LSZH
insulated, copper conductor, single core cable
(Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE)
or equievalant reputed make A catagory ISI
marked as approved, in recessed PVC conduit
Heavy duty FRLS of mentioned size
(AKG/Anchor/Kinjal or equievalant ISI
marked as approved) as required as per
direction of Engg.-in-Charge. Ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
327 15 conductor in 20 mm dia non metallic heavy Mtr 200.00 171.10 34,220.00
duty flexible conduit.(BDB to LSB/LIGHT
CKT/5A PLUG/INVERTER POINT TO EACH
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor .in 25 mm dia non metallic heavy
duty flexible conduit(LDB to LSB/5A SOCKET)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit .(PDB to PSB/ GAYSER
POINT/AC POINT/ROOM LIGHT CONTROL TO
CORRIDOOR POINT/DG PANEL ESSENTIAL
LOAD) (2X4+1X1.5)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
330 18 conductor in 32 mm dia non metallic heavy Mtr 200.00 289.10 57,820.00
duty flexible conduit.(PDB to PSB/GAYSER.
POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core 2.5
sq. mm copper wire for earth continuty
conductor in 25 mm dia non metallic heavy
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core 4
sq. mm copper wire for earth continuty
conductorin 32 mm dia non metallic heavy
duty flexible conduit .(LFDB TO FLOOR PANEL
TO TPN BDB light ) (4X10+2X4)
4 nos single core 16 sq. mm copper wire for
phase and neutral and 02 nos of single core
10 sq. mm copper wire for earth continuty
conductor in 40 mm dia non metallic heavy
duty flexible conduit.(FLOOR PANEL TO TPN
BDB power) (4X16+2X10)
Supply and drawing of following sizes FRLS
PVC insulated single core multistrand copper
conductor in existing surface / PVC conduit as
Supplying and fixing of following Modular type
switch / socket on the existing switch box /
cover including connections etc as
required.Make-L&T/Legrand/Roma
341 29 5/6Amps modular switchswitch No 25.00 81.42 2,035.50
342 30 5/6Amps modular socket No 21.00 87.32 1,833.72
343 31 15/16Amps modular switch No 12.00 128.62 1,543.44
344 32 15/16Amps modular socket No 12.00 177.00 2,124.00
Supplying and fixing of following Modular type
345 33 base & cover as follow.Make- 0 0.00 0.00 0.00
L&T/Legrand/Roma
346 34 Modular blanking plate No 20.00 20.12 402.38
347 35 Modular base & cover for 1 module No 16.00 71.35 1,141.67
348 36 Modular base & cover for 2 module No 20.00 105.20 2,103.94
349 37 Modular base & cover for 4 module No 20.00 146.36 2,927.11
350 38 Modular base & cover for 6 module No 20.00 188.43 3,768.68
351 39 Modular base & cover for 8 module No 20.00 225.03 4,500.52
352 40 Modular base & cover for 12 module No 12.00 320.16 3,841.89
Supplying and fixing 20 amps, 240 volts, SPN,
industrial type socket outlet, with 2 pole and
earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel
353 41 enclosure, on surface or in recess, with Nos 12.00 726.88 8,722.56
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in-Charge.. .
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 32 amps, 415 volts, TPN,
industrial type socket outlet, with 4 pole and
earth metal enclosed plug top along with 32
amps. C-series, TP MCB, in sheet steel
354 42 enclosure, on surface or in recess, with Nos 4.00 5128.28 20,513.12
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in-Charge.. .
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
355 43 cover plate (both side)(anti bactorial type) 0 0.00 0.00 0.00
plate for modular switches in recess etc as
required as per direction of Engg.-in-Charge.
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
including cutting the wall and making good the
same in case of recessed conduit as required
as per direction of Engg.-in-Charge .
Supply and fixing modular type indicator on
the existing switch box/cover . Equievalant
higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved as required
as per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and installation of AC starter
Modular type, Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved coil voltage-
415 Volt A.C. & O/L range of 9-14A range on
mod Box of suitable size including modular
363 51 coveras required as per direction of Engg.-in- Nos 20.00 730.42 14,608.40
Charge .All the Components should be
warrantied for a replacement period of 5 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover.
Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved .as required
as per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked
conforming to IS-1258/1987 in place of ceiling
rose as per direction of Engg.-in-Charge .
Supplying,fixing of Blanking plate(modular
type)( (anti bactorial & flame retradant type))
in existing switch box(anti bactorial & flame
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider/legrand /Panasonic ,
complete suitable for IPH standard hospital.
367 55 Light fitting Fixture & Fan 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha or
368 56 equievalant reputed make & model A catagory Nos 15.00 3683.96 55,259.40
ISI marked as approved ) of exhaust fan in
the existing wall, including fixing &
conntection as required as per direction of
Engg.-in-Charge.
Supplying, installation, testing and
commssioning of 1200 mm sweep
white/milky colour ceiling fan Make-
Equievalant higher model with 5 star
Havells/almonard/Anchor/Panasonic/Us
haor equievalant reputed make & model
A catagory ISI marked as approved )
including wiring the down rod of
standard length (upto 30 cm) with 1.5 sq
mm PVC insulated, copper conductor,
single core cable etc. as required as per
direction of Engg.-in-Charge,Replacement
.(With fan Regulator)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
Recess mounted LED luminaire made up of
CRCA powder coated sheet steel housing of
595 X 595 mm x 70 mm size with of not more
than 25W and system lumens output not less
than 3250 lumens (130 lm/ wt) with
diffusers for better light transmission and pure
effect with High luminous flux LEDs for better
light output, CRI not less than 80, CCT of
5700-6500 degree K, THD less than
10%,internal surge protection of 3 KV,
complete with Non integrated isolated
electronic driver (protects the output
/secondary side from any disturbance on the
input / primary side ensuring safe
operation)and all other accessories suitable for
operation on140- 270 V, 50 Hz ,L70 @50,000
burning hrs (5 years warranty)supply .as
required as per direction of Engg.-in-Charge
(Make: Panasonic/LT/Trilux /Philips/Wipro or
equievalant reputed make & model A catagory
ISI marked as approved.) .
Supplying and fixing of Energy
efficient recessed mounted LED
luminaire made up of CRCA powder
coated housing, Top opening clean room
LED luminaire of 600 X 600 x 65 mm
size with of 45 W and system lumens
output not less than 4500 lumens , IP65
,dust free & zero maintenance , anti glare
high transmittance PMMA diffuser ,
operating volatge range 150-265 V, high
performance potentiometric electronic
driver for zero maintenance , 2.5 KV
internal urge protection, L70 B 50:
50,000 hrs., CRI not less than 80, CCT of
5700-6500 degree K, THD less than
10%,,IP 65 protection complete with all
other accessories suitable for operation
on 230 V, 50 Hz supply as required as per
direction of Engg.-in-Charge.
(Make:Panasonic /PHILIPS/ Wipro or
equievalant reputed make & model A
catagory ISI marked as approved ) .
.Each CLEAN ROOM FITTING FOR OT ICU
Supplying and fixing of Energy efficient
surface mounted square shape 20 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20
watt and lumen output of 1500 lumens, , CRI
not less than 80,CCT of 6000 degree K,THD
372 60 less than 10%, with electronic driver, internal Nos 100.00 1791.24 1,79,124.00
surge protection of 2.5 KV , L70 B50: 30000
hrs (2 yrs warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of Engg.-in-
Charge. ( Make : Panasonic
/Trilux/Osram/PHILIPS/Wipro or equievalant
reputed make & model A catagory ISI marked
as approved).The luminaire should be
Replacement Warranty will be 5 years
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
130 lumens/watt ) of size 595 x595 x 70 mm ,
,CRI not less than 80,CCT of 5700-6500
degree K,THD less than 10%, with Non
integrated isolated driver (protects the output
/secondary side from any disturbance on the
input / primary side ensuring safe operation),
all other accessories , life : 50,000 burning
hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on
230 V, 50 Hz supply as required as per
direction of Engg.-in-Charge. ( Make :
Panasonic / LT /Wipro/PHILIPS or
equievalant reputed make & model A catagory
ISI marked as approved.) The luminaire
should be Replacement Warranty will be 5
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than 2200
lumen complete with electronic driver and all
374 62 other accessories with diffuser having 5 years Nos 50.00 940.46 47,023.00
warranty i/c connection etc as required as
per direction of Engg.-in-Charge. (Similar to
Panasonic/PHILIPS/LT/wipro or equievalant
reputed make & model A catagory ISI marked
SITC of Sleek LED 10 watt mirror light
fitting with extruded polycarbonate
housing,High optically efficient
diffuser,above wash basin complete with
all accessoriesetc. directly on wall,
including connection with 1.5 sq. mm
375 63 FRLS PVC insulated, copper conductor, Nos 32 863.76 27,640.32
single core cable and earthing etc. as
required as per direction of Engg.-in-
( Make : WIPRO / PHILIPS/Panasonic or
equievalant reputed make & model A
catagory ISI marked as approved. )
SITC of IP 20 Non-integral flexible LED strip
light,High optically efficient diffuser,, 4000K
with 12 w/mtr @ 5Mtr pool with Driver extra
376 64 as required as per direction of Engg.-in- Nos 4 1792.42 7,169.68
Charge ( Make : Panasonic PHILIPS/Wipro or
equievalant reputed make & model A catagory
ISI marked as approved. )
Supplying and fixing of small focus light for
small monuments as 30W , 5700 K required
as per direction of Engg.-in-Charge Make :
Panasonic/PHILIPS/LT/WIPRO or equievalant
reputed make & model A catagory ISI marked
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing extra conduit down rod of
20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
378 66 required as per direction of Engg.-in-Charge . Nos 152.00 38.94 5,918.88
(Note : More than 5 cm length shall be
rounded to the nearest 10 cm and 5 cm or less
shall be ignored)of ISI mark as approved.
Supply and fixing of Electronics socket type
fan regulator.Make-Legrand/Havells/Anchor
380 68 BDBS,DB,AC DB,FLOOR PANELS ,MCBS 0 0.00 0.00 0.00
Supplying and fixing of following mentioned
way, three pole/single pole and neutral, sheet
steel,double door MCB distribution board, 415
volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall
be fabricated to withstand IK09,the DB should
be properly pre-treated with 7 tank process
and duly powder coated, phosphatized with
381 69 powder coated finish, on surface/recess, 0 0.00 0.00 0.00
complete with terminal blocks,with suitable
size FR PVC insulated copper conducter up to
terminal blocks, tinned copper busbar, neutral
busbar, earth bar, din bar. Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
Acti 9/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
as approved. as per direction of Engg.-in-
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting with
100A Copper Bus Bar for each phase, with
382 70 neutral Bus bar, Earth Bar & Cable ties for Nos 2.00 2558.24 5,116.48
cable management, prefitted masking sheet,
IP43-IK09 with metal door(FOR LIGHT,POWER
INDOOR,3-PH,POWER LOAD) Warranty on DB
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution board
250V on surface/recess complete with tinned
copper bus bar, neutral bus bar, earth bar, din
bar, detachable gland plate, interconnections,
phosphatized and powder painted including
earthing etc. as required (but with out MCB/
RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS
LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
door)(only each EM. CONNECTION UPS LOAD)
8 Way(8+24) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting with
100A Copper Bus Bar for each phase, with
neutral Bus bar, Earth Bar & Cable ties for
cable management, prefitted masking sheet,
IP43-IK09 with metal door(FOR LIGHT,POWER
INDOOR,3-PH,POWER LOAD)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 6-20 amps rating, 240
volts, C series, Double poles MCB of Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
386 74 reputed make & model A catagory ISI marked Nos 12.00 392.94 4,715.28
as approved in the existing MCB DB complete
with connections as per direction of Engg.-in-
Charge. .MCB should have the fault indication
system in different colour for ON, OFF & TRIP
condition or Mid trip position for Trip
conditions for easier identification of fault.
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles MCB of
Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
387 75 reputed make & model A catagory ISI marked Nos 100.00 155.76 15,576.00
as approved. the existing MCB DB complete
with connections as per direction of Engg.-in-
Charge. MCB should have the fault indication
system in different colour for ON, OFF & TRIP
condition or Mid trip position for Trip
conditions for easier identification of fault.
Supplying and fixing 40 Amps rating, TPN, 415
volts, RCCB,300mA .Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB complete
with connections, testing and commissioning
etc. as required as per direction of Engg.-in-
Charge. .(4W TPN BDB IC)AC ODU
CONTROLLER). The
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABBor equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge.
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge.
Supplying and fixing 63Amps DP 240
volts, RCCB,300mA Make-Equievalant
higher model of
Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant
reputed make & model A catagory ISI
marked as approved in the existing MCB
DB in the existing MCB DB complete with
connections as per direction of Engg.-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
392 80 make & model A catagory ISI marked as Nos 6.00 3116.38 18,698.28
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge.(for power
BDB & AC ODU, 8 way TPN BDB IC).
S/IT/C Of Earthing with copper earth plate
600 mm x 600mm x 6 mm thick ISI marked
including accessories and providing masonary
394 82 with cover plate having loccking arrangement Nos 2.00 16398.46 32,796.92
and watering pipe etc (WITH charcoal and
salt) as required as per direction of Engg.-in-
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class B
G.I. pipe of 3.0 metre long with arrangements
for fitting/ termination of G.I. flat / wire with
G. I. nut bolts & washers including cost of
395 83 burnt wood charcoal, salt, foreign soil, water Nos 4.00 2954.72 11,818.88
pouring arrangements, brick masonary
enclosure on top with removable RCC cover
complete with labour for excavation of pit in
all kinds of soil & rock as required and as per
direction of Engineer-in-charge.
Providing and fixing 4 mm dia copper wire on
396 84 surface or in recess for loop earthing as Mtr 100.00 113.28 11,328.00
required.as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
Providing and fixing 50mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
Supplying and making brick massonary
pedastal with extra super structure including
cement plastering etc as required as per
direction of Engg.-in-Charge.
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
401 89 following size cables as per direction of Engg.- 0 0.00 0.00 0.00
in-Charge. Ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free after
sales service within warranty period for
acceptance of materials
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
404 92 following size cables as per direction of Engg.- 0 0.00 0.00 0.00
in-Charge. Ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free after
sales service within warranty period for
acceptance of materials
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
410 98 trench in one horizental formation including Mtr 12.00 153.40 1,840.80
excavation ,sand coushing protection covering
and refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM but not exceeding 120 SQ. MM
direct in ground in the trench in one horizental
formation including excavation ,sand coushing
protection covering and refilling the trench etc
as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
120 SQ. MM but not exceeding 400 SQ. MM
direct in ground in the trench in one horizental
formation including excavation ,sand coushing
protection covering and refilling the trench etc
as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
413 101 exceeding 25 SQ. MM direct in ground in the Mtr 28.00 49.56 1,387.68
EXISTING PIPE etc as required as per direction
of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
414 102 25 SQ. MM but not exceeding 400 SQ. MM Mtr 22.00 68.44 1,505.68
direct in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM in open duct etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
416 104 25 SQ. MM in open duct 400 SQ. MM direct in Mtr 20.00 54.28 1,085.60
ground in the EXISTING PIPE etc as required
as per direction of Engg.-in -charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
417 105 exceeding 25 SQ. MM in surface with shaddle Mtr 26.00 95.58 2,485.08
and screw etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
418 106 exceeding 120 SQ. MM From 25 SQ. MM in Mtr 20.00 151.04 3,020.80
surface with shaddle and screw etc as required
as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
419 107 exceeding 400 SQ. MM From 120 SQ. MM in Mtr 8.00 154.58 1,236.64
surface with shaddle and screw etc as required
as per direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs
for following mentioned size cable.as per
direction of Engg.-in-Charge.
Providing,fixing and laying of following dia
G.I. pipe (medium class) in ground complete
426 114 with G.I fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-in-
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground complete
with fitting incl. trenching(75 mm depth)and
refilling as per direction of Engg.-in-Charge.
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
CONNECTED LOAD) BUILDING LIGHT)as per
direction of Engg.-in-Charge. Warrentee
period of replacement of panel & accessories
must be 5 years & compelete test certificate
must be submitted along with panel board
including component list.
In commer- 01 no 63A 4P MCB 10kA,C
series with on/off trip indication Light load for
each floor. ( Make-LEGRAND-Ekinox3 DB/
432 120 Siemens-Betaguard/ Schneider- Acti 9/L&T 0 0.00 0.00 0.00
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model)or equievalant
make with proper model ISI marked)
Busbar- 04 numbers of 63Amps,50kA
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by
suitable size DMC insulator.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Out going- 06 nos 32A 2P MCB 10kA,C series
UPS Light load for each area UBDB. ( Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
434 122 Schneider- Acti 9/L&T (Equievalant 0 0.00 0.00 0.00
model)/Panasonic(Equivalant model)
/ABB(Equivalant model)or equievalant make
with proper model ISI marked)
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-60Amps Ammeter with
436 124 CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or 0 0.00 0.00 0.00
equievalant make & model)
(iii) 01 set of 0-500 voltmeter
437 125 .(DIGITAL)(Sicure/L&T or equievalant make & 0 0.00 0.00 0.00
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
CONNECTED LOAD) BUILDING POWER/AC)as
per direction of Engg.-in-Charge.
In commer- 01 no 125A 4P MCCB 25kA, with
ROM & S. Link. (make-
440 128 ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI 0 0.00 0.00 0.00
marked)(Icu=100%Ics)with shunt trip.with
axulary for BMS or equievalant make.
Busbar- 04 numbers of 125Amps,50kA
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by
suitable size DMC insulator.
Out going- 04 nos 63A 4P MCB 10kA,C series
for power BDB. ( Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model)or equievalant
make with proper model ISI marked)
Out going- 02 nos 32A 4P MCB 10kA,C series
forExtra power BDB. ( Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
443 131 Acti 9/L&T (Equievalant 0 0.00 0.00 0.00
model)/Panasonic(Equivalant model)
/ABB(Equivalant model)or equievalant make
with proper model ISI marked)
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of MFM with
445 133 CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or 0 0.00 0.00 0.00
equievalant make & model)
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
CONNECTED LOAD) BUILDING EMERGENCY
LIGHT)as per direction of Engg.-in-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
In commer- 01 numbers of 63 Amps 4P
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=50% Isc) with shunt trip &
axulary for BMS & mechnical inter locking for
one incommer source to other.
Busbar- 04 numbers of 100Amps Electrolytic
copper busbar duly sleeved by color coded
PVC sleeve & supported by suitable size DMC
Out going- 04 nos 32A 2P MCB UPS Light
load for each floor.
Out going- 03 nos 32A 4P MCB OT/ICU
POWER/OT MACHINE OR Bed head panel
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-100Amps Ammeter Digital
type & CTS.(DIGITAL)
(iii) 01 set of 0-500 voltmeter Digital
NB- This panel should have proper earth by
suitable rated copper flat.
456 144 UPS SYSTEM(For OT & COMMON AREA) 0 0.00 0.00 0.00
Supply ,installation ,testing & commissioning
of 10KVA UPS SYSTEM WITH suitable size
battery bank, rated of battery , IGBT based
inverter system with inbuilt isolation
transformer & automatic phase sicuency
corrector of 3ph in put to 3 ph
output,415V,protection for fault by
OL,UV,EF,GF,OC,Ph. Sicuency release of
equievalant model of Numeric/ RELLIO/
Emersion or equievalant reputed make A
catogory, ISI marked as approved ) including
supply of rack inverter stand with sufficient
backup upto 30 minutes with all required
accessories to complete the job including all
connection.LOAD OF OT,ICU,BLOOD BANK) as
per direction of Engg.-in-Charge.
CABLE TRAY /RACE WAY FOR DISTRIBUTION
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of Legrand -
Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved
.The Load bearing capacity of the Cable Trays
should be minimum of 104.8Kg/meter at the
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 300mm(W), of Legrand -
Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved
.The Load bearing capacity of the Cable Trays
should be minimum of 104.8Kg/meter at the
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 400mm(W), of Legrand -
Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved
.The Load bearing capacity of the Cable Trays
should be minimum of 104.8Kg/meter at the
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
GALVANIZED(GC) AS PER EN-ISO-1461 ,
FLOOR RACE WAY WITH JUNCTION with
internal dimensions of size 38mm(H) x
225mm(W), of reputed make ISI marked
as approved .(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge.(3 COMPARTMENT TOTAL 54
MM HEIGHT,COST WITHOUT GST,WITH LESS
DISCOUNT(REPUTED FACTORY MADE ISI
463 151 STREET LIGHT SYSTEM 0 0.00 0.00 0.00
Supplying, Erection, Fixing, connection &
testing of LED BOUNDRY WALL Light of
elegant look Panasonic/philips/wiproor
equievalant reputed make & model A
catogory, ISI marked as approved 35 W LED
street light having die cast aluminium housing
with toughened glass having lumen efficacy
of 110 lm/w or more (As per LM 79 report of
464 152 third party NABL lab) ,IP 65 protection or Sets 20.00 3779.54 75,590.80
more , LED street light model will be vide
Panasonic / Philips/LT/WIPRO make or
equievalant reputed make A catagory ISI
marked as approved having warrantied for a
period of 5 years . The luminaire should be
supplied along with bracket maintenance free
for inspection as required as per direction of
Engg.-in-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, Erection, Fixing, connection &
testing of Panasonic 40 LED GATE Light of
Panasonic / Philips/LT/WIPRO or equievalant
reputed make A catagory ISI marked as
465 153 approved maintenance free having 2 years Sets 8 11952.22 95,617.76
warranty G.I P ipe with braket including MCB
box & including with foundation as per the
Drawing for inspection as required & as per
direction of Engg.-in-Charge.
Supply of materials and installation of pipe
earth electrode made out of 50mm dia class B
G.I. pipe of 3.0 metre long with arrangements
for fitting/ termination of G.I. flat / wire with
G. I. nut bolts & washers including cost of
burnt wood charcoal, salt, foreign soil, water
466 154 pouring arrangements, brick masonary Nos 4 2954.72 11,818.88
enclosure on top with removable RCC cover
complete with labour for excavation of pit in
all kinds of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on
467 155 surface or in recess for loop earthing as Mtr 200 113.28 22,656.00
required as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
S/I/T&Commissioning of LT OUT DOOR FLOOR
mounted cubical type MCB ENCLOSURE made
out by 2mm CRCA steel sheet duly derusted &
pented by simens gray powder cote paint is
designed as G.A drawing. (FOR USE) with 20A
TPN MCB 01 NOLegrand/Schneider/L&T/ABB
or equievalant make & model as per direction
of Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
2 years of acceptance of materials
Supplying,laying of 3cx2.5 sq.mm copper
flexible cable with insulated cover of reputed
make,ISI marked with all other concerned
materials as per direction of Engg.-in-Charge.
470 158 Ncessary test report & Warrnaty certificate to mtrs 200 125.08 25,016.00
be submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
471 159 LIGHTENING PROTECTION SYSTEM 0 0 0.00 0.00
AIR TERMINAL & ACCESSORRIES LIGHTNING
ARRESTER+ MAST:
Providing and fixing of lightning conductor
finial made of 25 mm dia 300 mm long, G.I
472 160 tube,having single prong at top, with 85 mm NOS 16 454.30 7,268.80
dia 3 mm thick G.I base plate including holes
etc complete as required with as per direction
of Engg.-in-Charge.(RATE REFERING OSR
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Reveting, sweating and soldering of copper /
G.I. tape ( with another copper / G.I. tape,
base of the finial or any other metallic object)
as required .as per direction of Engg.-in-
Charge. (RATE REFERING OSR 2018 SOR NO-
Providing and fixing of G.I. tape 20 mm x 3
mm thick on parapet or surface of wall for
lightning conductor complete as required. (For
horizontal run) as per direction of Engg.-in-
Charge.(RATE REFERING OSR 2018 SOR NO-
Providing and fixing of G.I. tape 20 mm x 3
mm thick on parapet or surface of wall for
lightning conductor complete as required. (For
virtical run) as per direction of Engg.-in-
Charge. (RATE REFERING OSR 2018 SOR NO-
Providing and fixing of testing joint, made of
20 mm x 3 mm thick G.I. strip, 125 long with
4 nos of G.I. bolts, check nuts and spring
washer etc complete as required as per
direction of Engg.-in-Charge. (RATE REFERING
OSR 2018 SOR NO-4.12)
Providing and laying of G.I. tape 32 mm x 6
mm from earth electrode directly in ground as
required as per direction of Engg.-in-Charge.
.(RATE REFERING OSR 2018 SOR NO-4.14)
Maintenance free Safe Earthing Electrodes
with ISI G.I. pipe dia 75mm as Secondary
electrode with wall thickness of 2.6 mm and
the Primary Earthing Electrode will be 50mm X
6mm X 1no M.S. hot dipped galvanized strip
filled with a highly conductive & non-corrosive
compound in between the Primary Earthing
and the secondary Earthing, the Surface Area
in will be 7,06,500sqmm for 3mtrs length and
Cross Sectional Primary conducting area is
300 sq.mm. An Solid G.I. Base plat seals the
unit at the bottom. as per direction of Engg.-
in-Charge. (MES-GFC ground Filling compound
will be provided in 25 kgs Bags.)(MES-GFC
ground Filling compound will be provided in 25
kgs Bags.)(2 bags required for each earthing
electrode.)(FOR lightening protection &
Building Electrification).The entire earthing
system should be Replacement Warranty will
be 5 years.Make-OBO/Star-x/ABB or
equievalant reputed make & model A
Supply,installation, testing and commissioning
480 168 of 4 P&T & 14 Extensions Hybrid EPABX Set 2 15930.00 31,860.00
Supply,installation, testing and commissioning
481 169 of RJ11 Modular Complete in concealed Set 25 531.00 13,275.00
manner including termination of cable
Supply & Laying of 2 Core 0.5mm telephone
482 170 cable using Rigid PVC Pipe in concealed Rmt 655 76.70 50,238.50
manner per running metre of cable laid.
Supply,installation, testing and commissioning
483 171 of Electronic Push Button Telephone with Nos 25 826.00 20,650.00
Supply,installation, testing and commissioning
of GSM FCT Terminal
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply,installation, testing and commissioning
of Lightening Protector for P&T Lines
Supply,installation, testing and commissioning
of 12v 7 Ah Battery including termination
Supply,installation, testing and commissioning
488 176 of RJ45 Modular Complete in concealed Set 15.00 1602.44 24,036.60
manner including termination of cable
Supply & Laying of Cat 6 cable using Rigid PVC
489 177 Pipe in concealed manner per running metre of Rmt 399.00 67.26 26,836.74
Supply,installation, testing and commissioning
of Patch Panel, 6U Rack, Cable Manager,
Cooling Fan x 2 Nos., Earthing Kit, Power
Supply,installation, testing and
commissionining of 1 Mtr Patch Cord
Supply,installation, testing and
commissionining of 3 Mtr Patch Cord
Supply & Laying of RG59+ 3 Core cable using
493 181 Rigid PVC Pipe in concealed manner per Rmt 600.00 128.62 77,172.00
running metre of cable laid.
Supply,installation, testing and commissioning
of BNC & DC Connectors
Supply,installation, testing and
495 183 commissionining of 4 TB CCTV Surveillance Nos 1.00 15104.00 15,104.00
Supply,installation, testing and
commissionining of 10 Amps Power Supply
Supply,installation, testing and commissioning
of Smart 32" LED Monitor
Supply,installation, testing and commissioning
of 10 Mtrs HDMI Cable
Supply,installation, testing and commissioning
Supply,installation, testing and commissioning
of Wireless Mouse
501 189 ASSESS CONTROL SYSTEM 0 0.00 0.00 0.00
[S-B251CB] Biometric Controller - Secureye -
503 191 CABLING & ACCESSORIES 0 0.00 0.00 0.00
SL - Cat6 - AKG Pipe
Supply & laying of Cat 6 Cable in AKG PVC
Double lock casing caping including all
per running metre of cable used..( As Required
Pipe Laying - Concealed
Wall chasing and installation of PVC pipe in a
505 193 concealed manner per running metre of pipe No 43.00 89.68 3,856.24
laid..( As Required )
506 194 SYSTEM INSTALLATION 0 0.00 0.00 0.00
System Installation, testing and
508 196 BIOMATERIC READER 0 0.00 0.00 0.00
[S-B100CB] Biometric Controller - Secureye -
Finger print + RFID Reader
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
EM Lock - Secureye - 600 Lbs Single Door
Exit Switch - Secureye - Exit Switch
EM Lock Bracket - Vantage - Z Bracket
[AD-125AOD (PS012)] DC Power Supply - ERD
SL - Cat6 - AKG Pipe
Supply & laying of Cat 6 Cable in AKG PVC
Double lock casing caping including all
per running metre of cable used.( As Required
SL - 2C 1.0 PC - AKG Pipe
Supply & laying of 2 core 1 sq mm power
PVC Pipe/Double lock casing caping including
accessories, per running metre of cable
Pipe Laying - Concealed
Wall chasing and installation of PVC pipe in a
519 207 concealed manner per running metre of pipe No 20.00 76.70 1,534.00
laid..( As Required )
520 208 SYSTEM INSTALLATION 0 0.00 0.00 0.00
System Installation, testing and
521 209 commissioning charges. No 2.00 19706.00 39,412.00
522 210 NURSE Calling system 0 0.00 0.00 0.00
Supply, Installation, Testing & commissoning
Charges of VDE 0834 APPROVED PATIENT
HANDSET WITHOUT VOICE shall consist of :
- 1 x RJ 45 Jack for connecting in to
connection module with autodisconnecting
technology intellifix
- Membrane Key pand with Nurse Call Button
- Soft touch buttons for Optinally controll of
room and bed lights
- Integrated Finder and reassurance light
- Antimicrobial Coating
- Cradle for mouting the handset
Supply, Installation, Testing & commissoning
Charges of SITC OF VDE 0834 complied
BEDSIDE CONNECTION MODULE WITHOUT
VOICE for connecting the patient handset shall
consist of :-Mounting rail with board, 2 x RJ45
sockets for connecting the data bus
-Membrane keypad with Call button and
Cancel / Presence Button and integrated
524 212 reassurance LED light No's 6.00 11174.60 67,047.60
- 1x RJ 45 socket with for connecting without
voice Patient handset
- 1 x 5 Pole DIN connector to be used as a
diagnostic port
- 4 x RJ 12 connection to be used for
connecting Buttons and Lamp module
- Antimicrobial Keypand
- It should include Countersunk fitting Box
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation, Testing & commissoning
Charges of Pull Button with integrated finder
lights or reassurance light, micro switch with a
2 metre pull cord and aluminous grip with a
nurse symbol printed on it, Countersunk
switchbox etc., complete. Pull cord
characteristics with max. force at break 120N
(ca.12 kg) for hygiene reasons it must also be
possible to change the pull cord very easily
using a snap hook for Basic Device, 4 screw-
type terminals for connecting the power
supply circuit etc., complete.
Supply, Installation, Testing & commissoning
Charges of SITC OF VDE 0834 approced STAFF
TERMINAL consist of :
- Bright 6.5 inch TFT display with wide viewing
angle, resolution of 800 x 480 pixel and LED
backlight for displaying all details
- Interactive operation via touch sensor field
- 2 unit foot postions for different angles of
526 214 inclination or wall mounting, No's 1.00 65018.00 65,018.00
- Answering receiver for speaking discretely,
- Microphone and loudspeaker for hands-free
speech (incl. volume control),
- Automatic changeover between hands-free
and discrete speaking,
- 100BaseTX interface to the system switch,
- 2.8 m connection cable with an RJ45
connection plug, which is protected
from disconnection
Supply, Installation, Testing & commissoning
Charges of LAMP module For optical indication
of calls, presences and reminders in the
relevant colours conforming to VDE0834
- 4 light chambers with light reflectors for
homogeneous illumination,
- 1 light chamber fitted with 3 ultra bright red
- 1 light chamber fitted with 3 ultra bright
- 1 light chamber fitted with 3 ultra bright
- 1 light chamber fitted with 3 ultra bright blue
- Every light chamber conforms to the light
strength set out by VDE0834,
- the LED life expectancy is approximately
100,000 operating hours,
Supply, Installation, Testing & commissoning
Charges of EVENT DATABASE LICENSE which
528 216 will enable of lgging of all the events (e.g. No's 1.00 172327.20 1,72,327.20
Calls, Presences Etc. ) on the management
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation, Testing & commissoning
Charges of VDE 0834 APPROVED SYSTEM
SWITCH (FIELD SWITCH) to form a
decentralized node for data exhange hub
- 1 x RJ45 socket, 100Mb IP Port (IEEE802.3
100BaseTX), galvanically isolated conformant
with EN 60950 and VDE 0834
- 8 x RJ45 POE sockets, each with a 100Mb IP
system port (IEEE802.3 100BaseTX) for
connection of all IP capable system modules,
529 217 - 2 x 2 x RJ45 sockets for connecting the I/O No's 2.00 61607.80 1,23,215.60
data buses capable of connection up to 125
Buttons, Patient Handset Etc with inbuilt
Power supply to Buttons
- Supervised 24VDC output for extrnal devices
e.g. Lamp module
- Also have the Netorking feature Layer 2 NSP
Ethernate type 0x3000, IEEE 802.1p Priority,
IEEE 802.1Q VLANs, RFC 768 UDP, RFC 783
TFTP Protocol (revision 2), RFC 793 TCP, RFC
826 ARP, RFC 854 TELNET, RFC 951 BOOTP,
RFC 2236 IGMPv2
Supply, Installation, Testing & commissoning
530 218 Charges of Display Output Module, Display No's 1.00 18644.00 18,644.00
device not Included
Supply, Installation, Testing & commissoning
Charges of Room Terminal without Display
Supply, Installation, Testing & commissoning
Charges of Room terminal with speech
function for fitting in patient rooms and other
important rooms as a communication center
Supply , Laying, testing & commissioning of
CAT6e cable in rigid PVC
Pipe/Concealed/Casing Caping per running
metre of cable used
Supply, Installation, Testing & commissoning
Charges of Manangement Centre used during
the commissioning of the system for reading in
the system topology, for uploading the fi
rmware and the system confi guration, for
operating interfaces to foreign systems, for
logging of all system events and as a central
location for system confi guration and remote
maintenance. The minimum requirements for
the management center are as follows: - Intel
Xeon E3 2,3 GHz or similar, 4 GB RAM,1 x 500
GB HDD, 1 x DVD harddrive, 2 x Gbit LAN
Ethernet RJ45, 4 x USB V2.0, 1 x PCI or 1 x
PICe socket, Preloaded SUSE Linux enterprise
server from V.11-SP1 and Nurse Call
Necessary Softwares and licesnces
535 223 CATV system Backbone Connectivity 0 0.00 0.00 0.00
Supply , Installation, testing , commissioning
of TV socket wih base & cover complete.
Supply , Laying, testing & commissioning of
537 225 RG6 Solid Copper cable in PVC Pipe/Casing Mtr's 244.00 103.84 25,336.96
caping per mtr. of cable used.
538 226 AUDIO VIDEO SYSTEM 0.00 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply,Installation,Testing & Commissioning
of 55 INCH (139 cm) ultra HD (4K) LED
smart TV , with launch year must be 2023 ,
inbuilt speaker of minium 40 watt , inbuilt
storage memory of minium 8 GB , support ios
, android , inbuilt wifi , bluetooth connection ,
port for external USB drive .(Make:-SONY /LG
Supply and fixing of Modular metal box on
surface or in recess with suitable size of
Modular cover in front including providing and
fixing 16Amp socket outlet and 16Amp
Modular switches connection (Make of
Modular Switch- Schineider cripsal x
/panasonic europa /Legrand myrius / L&T
englaze or eq or eq )
Supply and fixing of modular 6Amp plug with
6Amp switch on existing board (Make of
541 229 Modular Switch- Schineider cripsal x Each 6.00 227.74 1,366.44
/panasonic europa /Legrand myrius / L&T
Recessed wiring to submain in the following
sq.mm FRLS PVC insulated single core
multistrand copper conductor of ISI marked
conforming to IS-694/1990 in the following
dia non-metallic heavy duty flexible conduit
542 230 1.6 mm thick along with the following sq.mm 0 0.00 0.00 0.00
FRLS PVC insulated single core multistrand
copper conductor as earth wire as
required.(Make of wire-Finolex /L&T / Havells /
544 232 Solar Lighting System 0.00 0.00 0.00 0.00
Supply,Installation,Testing & Commissioning
of 7 Mtr long Galvanized PU painted octagonal
pole with solar pannel of 150 watt / 165 watt /
12 v poly (make - luminous ) with suitable
angel pannel holder and bracket on top of
pole with 60 watt solar LED light ( 2 IN 1)
battery inbuilt in light , fully concrete
foundation base with stell rods of jindal , 8
SWG aluminium wire for earthing of pole ,with
all other wiring material ( 3 core 4 sq mm
flexible copper DC cable 5 mtr ) ,MC 4
Connector , Pole Thickness-3.1mm with
foundation nuts and bolts and bracket of
suitable for holding 1 No of 60 Watt LED DC
light (2 in 1) . pole Make (Bajaj or
equivalent of Klite/Valmount) with 60 W LED
solar DC light with( 2 in 1) and battery in
built .(Make:-Bajaj / Philips/panasonic/K-lite )
546 234 Campus Lighting _ High Mast 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply,Transportation & Erection of 12.5 mtr.
High mast pole of Bottom dia 360 mm,Top dia
150 mm, plate Thickness - 3/3 mm ,
Baseplate of 470mm dia and Pcd 445 mm,
(Bajaj/Utkarsh/Havells/ RR ispat / Utkal
Galvanisor/Valmont make) with its related
accessories.Mast shaft made from H.T.Steel of
hot dip galvanised and suitable for wind speed
220km/hr as per IS 875.It should also be
included with head frame,raising & lowering
system comprising two continuous SS wire
rope of 6mm dia,trailing cable,double drum
winch, galvanised lantern carriage
arrangement suitable for installation of 8
Nos.luminaries symmetrically and its control
547 235 gear box,motor,manual operating Each 1.00 399859.52 3,99,859.52
handle,motor mounting plate,stopper,Junction
box,lightening protection,4mm2, 4 core
flexible copper cable from bottom junction box
to top Luminaires , MCB control including
foundation acc,the mast shall have integral
power tools installed inside the base
compartment for raising & lowering operation
of top bracket with Luminaries with
Construction of suitable shallow foundation
with 1:2:4 or M20
grade concrete for the High mast considering
the safe soil bearing capacity at site as
10T/sq.mtr.at 2 mtrs depth with all materials
and labour charges (as per drawing).Supply &
Fitting of foundation bolts of size-M24 / 750 *
Supply,Installation,Testing & Commissioning
of 250 watt LED Flood Light Luminaire with
efficiencymore than 120 Lumens/watt and
indivisual LED with secondary optics made in
high pressure die-cast housing with toughned
glass and heat sink in Aluminium extrusion
with IP 66 protection complete of (
Havels/panasonic / Bajaj / phillips ) make.
Supply & fixing of Decorative Round Arm
bracket with all accessories suitable for fixing
of 8 Nos Flood light fittings including clamp &
Supply & Installation of LED type single dome
550 238 aviation obstruction light.Type-BGAV 302 LED Each 1.00 6230.40 6,230.40
of Bajaj/Havells/HPL make.
Suppy & Laying of 4 Core 6 sq mm PVC
insulated copper unarmoured Cable inside 32
mm dia HMS pipe (
Polycab/Havells/Nicco/Glowstar) make.
S/F of Special Earthing complete with
provision of 600x600x3.15mm thick copper
plate along with 25x5mm copper strip in
40mm dia G.I.pipe
including soldering of strip if necessary and
providing masonary enclosure with cover plate
having locking arrangement and watering pipe
etc. with charcoal and salt as required.
Supply and laying of 32mm 6kgf/cm2 ID
553 241 HDPE pipe of ISI marked as per direction Mtr 55.00 99.12 5,451.60
of engineer in charge
Cable trenching with HDPE pipe in all type of
soil with excavation of earth,laying of cable
with sand cushing and brick laying etc.& filling
of loose soil upto ground level.
555 243 Sub-Total of Electrical Works 0 0.00 0.00 76,29,394.74
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
557 2 Supply of A,C with indoor and outdoor unit 0 0.00 0.00 0.00
1.5 TR high wall split A.C 3Star
(Make:Toshiba/Hitachi/Carrier/Diakin or eq.
559 4 REFRIGRANT PIPING 0 0.00 0.00 0.00
Supply,installation of hard/soft copper
refregrant piping,complete with fitting of
bends and other nesessary material to
complete the job.
561 6 1 TR to 3 TR high wall split A.C mtr 120.00 988.84 1,18,660.80
Supply,installation & fabrication of MS base
563 8 frame for both indoor and outdoor unit and 0 0.00 0.00 0.00
other nesessary material to complete the job.
564 9 1 TR to 3 TR high wall split A.C no 120.00 1984.76 2,38,171.20
Supply,installation & fabrication of Insulated
drain water piping from indoor to nearestdrain
point separate to all and other nesessary
material to complete the job.
568 13 SHEET METAL WORKS 0.00 0.00 0.00 0.00
Supply,laying of control cable and other
nesessary material to complete the job.
571 16 For 1 TR to3 TR high wall split A.C no 150.00 145.14 21,771.00
572 17 Sub-Total of HVAC Works 0 0.00 0.00 10,65,334.68
573 1 Firefighting Works 0 0.00 0.00 0.00
574 2 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System Supplying,
installation, testing and commissioning of CO2
type Fire Extinguisher 4.5 kg capacity
confirming to IS: 2878 made from ISI marked
seamless cylinder confirming to IS: 7285,
fitted with ISI marked controlled valve
confirming to IS: 3224, high pressure 1mtr
discharge hose & horn complete with initial
gas charged with carrying handle & wall
mounting bracket as per direction of Engineer-
in-charge. (Make:CS-FIRE/SUNMAX/CANEXE
or equievalant )
Supplying, installation, testing and
commissioning of Mechanical Foam type 9 litre
capacity Fire Extinguisher, ISI marked, IS:
10204, containing 540 ml AFFF liquid ISI
marked, IS: 4989 Part II and a polyurethane
coated CO2 Gas Cartridge, ISI marked, IS:
4947 complete with gunmetal union cap, nylon
hose with plastic foam making branch and wall
mounting bracket as per direction of Engineer-
577 5 AUTOMATIC FIRE DETECTION SYSTEM 0 0.00 0.00 0.00
Supplying, installing ,testing and
commissioning of Digital Manual Call Point,
Flush mount Resettable (Non-Breaking Glass),
Supplied with surface mount back box and
579 7 Special Reset Key, Optional Each 4.00 6323.62 25,294.48
Accossories:4556356, 4556520(Certified by
LPCB) as per direction of Engineer-in- charge.
(Make:GST/HONEY-WELL/COOPER or
580 8 Electronic Hooters 0.00 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, installing ,testing and
commissioning of Intelligent Sounder Strobe,
Addressable Sounder with Visible Indicator, 16
tones, high/low consumption modes, can be
loop owered or 24VDC powered, 83-89dB
(Certified by LPCB) as per direction of
Engineer-in- charge. (Make:GST/HONEY-
WELL/COOPER or equievalant )
Supplying and drawing of 2X1.5 sq.mm PVC
insulated PVC Sheathed FRLS copper cable
with 20 mm dia medium class PVC conduit
583 11 surface/ recessed conduit with all accessories Mtr. 122.00 115.64 14,108.08
as per direction of Engineer-in-
charge.(MakeFINOLEX/POLYCAB/RR or
Supplying & laying of 2x1.5 sqmm fire alarm
armoured cable,600/1000V rated with
annealed copper conductor having XLPE
insulation, steel wire armouring & FRLS outer
sheath complete as required as per direction
of Engineer-in-charge.
Supplying and fixing metal box of following
sizes (nominal size) on surface or in recess
with suitable size of phenolic laminated, sheet
cover in front including painting etc. as
required. 100 mm X 100 mm X 60 mm
deep.as per direction of Engineer-in-charge.
Supply Installation of Sinage floor, entery Exit,
Stair cass,Lift and other.as per direction of
Engineer-in-charge.(Make:COOPER/ASES or
Supplying, installation, testing &
commissioning of 2 zone,voice alarm controller
with USB, MP3 player (including 2 zone button
paging station) with seamless integration
facility with main fire alarm panel for voice
evacuation complete as required
Supplying, installation, testing &
commissioning of digital audio amplifier 250
Watt, 25V rms operating at 240 Volt AC
Supply complete as required.
Supplying, installation, testing &
commissioning of ceiling/wall mounted loud
speaker, 3/15 Watt in ABS enclosure complete
Supplying and drawing of speaker cable Single
pair, 2-core, 1.5 sqmm in existing conduits
592 20 Sub-Total of Firefighting Works 0 0.00 0.00 5,68,456.74
594 2 ITE MAP, SINAGE AND LED LETTER BOARD 0.00 0.00 0.00 0.00
Supplying fitting and fixing of ACP Sheet with
alluminum framing ( Red colure with yellow
595 3 border ) of front side portico incluiding staging Sft 970.14 587.64 5,70,092.78
in all floor, cost of all accessories, materials,
labours & T&P etc.complete excluding GST.
Supplying fitting and fixing of LED Letter
Board at DHH, Paralakhemundi incluiding cost
of all accessories, materials, labours & T&P
etc.complete excluding GST.
LED Letter DISTRICT HEAD QUARTER
597 5 HOSPITAL, PARALAKHEMUNDI (Odia & 1686.00 318.60 5,37,159.60
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
LED Letter ATTENDANT REST SHED, / Sq.
PARALAKHEMUNDI (Odia & English) Inch
Supplying fitting and fixing of Steel Site Map
and Sinage at DHH, PARALAKHEMUNDI
incluiding cost of all accessories, materials,
labours & T&P etc.complete excluding GST.
Supplying fitting and fixing of Name plate at
DHH, PARALAKHEMUNDI incluiding cost of all
accessories, materials, labours & T&P
etc.complete excluding GST.
Supplying of approved colour with branding
601 9 including painting material material including SQM 2090.25 76.70 1,60,322.18
all etc required to complete the work.
Surface dressing of the ground including
removing Vegetation and making up
undulations and in-equalities not exceeding 15
cms in depth/ height including disposal of
rubbish lead upto 50m (at least 5m away from
the dressed area).
Supplying and stacking of good earth at site
including royalty and carriage upto 5 km lead
complete (earth measured in stacks will be
reduced by 20% for payment), 200mm thick.
Supplying and stacking sludge at site including
royalty and carriage upto 5 km lead complete
(sludge measured in stacks will be reduced by
8% for payment).
Uprooting weeds from the trenched area after
10 to 15 days of its flooding with water
including disposal of uprooted vegetation,
breaking clods and fine dressing the ground
including all materials and labour complete as
per direction of Engineer-In-Charge.
Providing and laying Neelgiri/Mexican grass
turf with earth 50mm to 60mm thickness of
existing ground prepared with proper level and
ramming with tools wooden (Dhurmos) and
607 15 than rolling the surface with light roller make Sqm 675.00 221.83 1,49,734.04
the surface smoothen and light waterning with
sprinkler and maintenance
for 30 days or more till the grass establish
properly, as per direction of officer-in-charge.
Providing & laying Selection no. 1 grass turf
with earth 50mm to 60mm thickness of
existing ground prepared with proper level and
ramming with required tools wooden and than
608 16 rolling the surface with light roller make the Sqm 225.00 90.53 20,369.16
surface smoothen and light watering the same
maintenance for 30 days or more till the grass
establish properly,as per direction of officer in
Provision of plantation all around the campus
with suitable Plants and Shurbs where
required including all material and labour
611 19 Aglaonema crispum(6'' DIA) Nos 20.00 59.00 1,180.00
612 20 Alpinia sanderae(10'' dia) Nos 20.00 106.20 2,124.00
613 21 Anthurium andreanum(10'' dia) Nos 20.00 106.20 2,124.00
614 22 Asparagus densiflorus(6'' dia) Nos 20.00 47.20 944.00
615 23 Caladium bicolor(6'' dia) Nos 20 59.00 1,180.00
616 24 Calathea bella Nos 20.00 59.00 1,180.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
617 25 Chlorophytum comosum(6'' dia) Nos 20.00 47.20 944.00
618 26 Costus melartifolius(10'' dia) Nos 20.00 106.20 2,124.00
619 27 Curculigo capitulata (6'' dia) Nos 20.00 59.00 1,180.00
620 28 Dracaena deremensis(10'' dia) Nos 20.00 106.20 2,124.00
621 29 Furcaria foetida(10'' dia) Nos 20.00 106.20 2,124.00
622 30 Heliconia rostrata(10'' DIA) Nos 20.00 106.20 2,124.00
623 31 Hemigraphis colorata(6'' DIA) Nos 20.00 59.00 1,180.00
624 32 Kaempferia roscoeana Nos 20.00 59.00 1,180.00
625 33 Leea coccinea(6'' DIA) Nos 20.00 59.00 1,180.00
626 34 Livistonia rotundifolia(10'' DIA) Nos 20.00 118.00 2,360.00
627 35 Ophiopogon jaburan(6'' DIA) Nos 20.00 59.00 1,180.00
628 36 Pandanus sanderi(6'') Nos 20.00 59.00 1,180.00
629 37 Philodendron bipinnatifidum Nos 20.00 153.40 3,068.00
630 38 Philodendron erubescens Nos 20.00 153.40 3,068.00
631 39 Philodendron williamsii Nos 20.00 153.40 3,068.00
632 40 Rhoeo spathacea (yellow) Nos 20.00 70.80 1,416.00
633 41 Spathyphyllum clevelandii Nos 20.00 59.00 1,180.00
634 42 Wedellia chinensis(10'' DIA) Nos 20.00 70.80 1,416.00
Provision of plantation all around the campus
635 43 with suitable tress where required including 0 0.00 0.00 0.00
all material and labour charge.
636 44 Araucaria bidwillii Nos 10.00 177.00 1,770.00
637 45 Cinnamomum camphora Nos 10.00 118.00 1,180.00
638 46 Cryptomeria japonica Nos 10.00 177.00 1,770.00
639 47 Cupressus sempervirens Nos 10.00 177.00 1,770.00
640 48 Filicium decipiens Nos 10.00 118.00 1,180.00
641 49 Murraya exotica Nos 10.00 118.00 1,180.00
643 51 Thuja orientalis Nos 10.00 118.00 1,180.00
644 52 Bougainvillea Nos 10.00 59.00 590.00
646 54 Gardenia jasminoides Nos 10.00 118.00 1,180.00
Plantation of Trees, Shrubs, and Hedge at site
i/c watering and removal of unsaverieable
material’s as per direction of officer in charge
(excluding cost of plant & water)
648 56 Labour for Maintainace Month 6.00 35400.00 2,12,400.00
Providing and laying at or near ground level
factory made kerb stone of M-25 grade
cement concrete in position to the required
line, level and curvature, jointed with cement
mortar 1:3 (1 cement: 3 coarse sand),
including making joints with or without
grooves (thickness of joints except at sharp
curve shall not to more than 5mm), including
making drainage opening wherever required
complete etc. as per direction of Engineer-in-
charge (length of finished kerb edging shall be
measured for payment). (Precast C.C. kerb
stone shall be approved by Engineer-in-
Supply & installation of inter lock kerb stone of
650 58 solid gray 300 X 300 X 150 mm inluding cost Cum 64.42 10163.99 6,54,764.17
of all labour & materials etc.
651 59 Master Plan of facilities NO 1.00 236000.00 2,36,000.00
652 60 Mosquito Repellent nets 0 0.00 0.00 0.00
Supplying fitting and fixing of UPVC window
with mosquito net sliding type of approved
quality including all etc required to complete
654 62 Queue Management - Civil work. 0 0.00 0.00 0.00
Touch screen based token dispenser - upto 32
Token calling unit with LCD display -
656 64 keys'PREV' and 'NEXT', one 'CALL' key, one Nos 3.00 14720.50 44,161.50
'RETAIN' key and a 'CLOSE' key
Token hub - 20 ports for Conneting All
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Token display unit- single line ; 6 digits; 4
digit for token no, 2 digits for counter no
TV interface unit ( model name :
660 68 32 inch LCD screen for waiting hall Nos 1.00 21830.00 21,830.00
661 69 HDMI cable 2 metres Nos 1.00 1770.00 1,770.00
662 70 Supply of D-Link CAT6 cable and PVC conduit Nos 1.00 88500.00 88,500.00
663 71 Installation testing and commissioning Nos 1.00 23600.00 23,600.00
Providing fitting and fixing of partition walling
aluminium anodized section No.9210 and
9270 powder coated as single groove and
double groove respectively as hortzontal and
vetrical member and section 4600 as tapered
clip and jointing angle No.1855 etc as per
direction of engineer in charge excluding cost
of laminagted board.
Providing fitting fixing of aluminium door with
anodized aluminium door section of 9202
powder coated as vertical member, 9201 as
top, 9200 as bottom and middle member with
frame section as 4660 and bottom member
666 74 with frame section no.9221 and tappered clip Kg 243.18 574.10 1,39,609.15
No.4660 and the frame to be complete by
means of jointing anngle No.1855 including
cost of labour T&P hire charges of drilling
machine, labour charges etc complete
execuding cost of laminated boad.
Providing fitting and fixing of prelaminated
667 75 particle board/ACP Sheet in partition wall SQM 325.51 552.35 1,79,794.85
incluiding all cost etc complete.
Providing fitting and fixing of 6mm thick plain
668 76 glass in partition wall incluiding all cost etc SQM 405.97 652.37 2,64,844.64
Supplying of steel chair for sitting
arrangement of patient attendant waiting area
in MCH and DHH of approved quality including
all etc required to complete
Supplying fitting and fixing of Counter Table /
670 78 Wardrobe in SNCU Nurse room incluiding all SQM 19.51 25545.04 4,98,358.21
cost etc complete.
Supply & Installation of Network IP RUGGED
DOME with 1/3"4MP CMOS Image sensor
having 2688x1520 resolution and minimum
illumination. of 0.03 lux [email protected] Colour of
148 ft (45m IR Distance) Smart IR, WDR (120
dB), 3D DNR Noise reduction, upto 4
672 80 configurable zones for Privacy masking & NOS 5.00 31978.00 1,59,890.00
motion Detection, BLC /HLC, Onvif Profile S,
Profile G, with H.265, IR, TDN and 2.7-
13.5MM MFZ lens, POE 8.5 W max power
Consumption, IP67 & IK10, 16X Digital Zoom,
SD card provision of 128GB UL Listed.
Honeywell/Axis/Pelco
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply & Installation of Network IP RUGGED
DOME with 1/3"4MP CMOS Image sensor
having 2688x1520 resolution and minimum
illumination of 0.03 lux [email protected] Colour of
82 ft (25m IR Distance) Smart IR, WDR (120
dB), 3D DNR Noise reduction, upto 4
configurable zones for Privacy masking &
motion Detection, BLC /HLC, Onvif Profile S,
Profile G, with H.265,IR,TDN and 2.8 MM fixed
lens, F 2.0 POE 8.5 W max power
Consumption, IP66, 16X Digital Zoom, UL
Listed. Make-Honeywell/Axis/Pelco
Supply & Installation of Network IP BULLET
Camera with 1/3"4MP CMOS Image sensor
having 2688x1520 resolution and minimum
illumination of 0.03 lux [email protected] Colour of
98 ft (30m IR Distance) Smart IR, WDR (120
dB), 3D DNR Noise reduction, upto 4
configurable zones for Privacy masking &
motion Detection, BLC /HLC, Onvif Profile S,
Profile G, with H.265,IR,TDN and 3.6 MM fixed
lens, F 2.0, POE 11.74 W max power
Consumption, IP66, 16X Digital Zoom, UL
Listed. Honeywell/Axis/Pelco
Supply, Installation, Testing & Commissioning
of IP Network TDN PTZ Camera with auto
tracking, 1/1.9" CMOS, 2 MP @ 25fps, triple
stream, Min. Illumination required 0.005 lux @
F1.6 (color) & 0.0005 lux @ F 1.6(B/W) or
better, 120dB True WDR or better, Min. Pixels
1920 x 1080, triple stream, FL 4.8mm-120
mm Zoom 25x motorized focus zoom lens &
16 x digital zoom, BLC, HLC, 3DNR, Electronic
Image Stabilitzation, Privacy Mask,
Internal/External Illuminatrion range with
upto 200m IR distance, Dual channel Audio
G.711a/G.711u/AAC, 128GB SD card support,
Alarm: 7 In/2 out, PoE, H.264 High Profile and
MJPEG, POE Class 5 and 12V DC/24VAC, IP
66, Having Operating temp range: -10°C to
65° C. Certifications: ONVIF Profile S
compliant, UL, CSA 60950- 22, CE (EN 50130-
4 & EN 55022), FCC Part 15 & ROHS
Supply & Installation of 64 Channel fully
Featured NVR with High decoding capability
for Ultra 4K HD viewing and recording, up to
12MP(4K) resolution live view, Preview &
Playback, Internal storage supports 8 HDDs
expandable up to 64 TB (8 TB each). Record
bit Rate (320Mbps), 2 HDMI/VGA
simultaneous video, usb ports 3 (2 rear
PC communications and keyboard).) The Quick
Wizard and full PoE support (for up to 16
channels) make setup fast and easy. Monitor
from anywhere using the mobile apps for both
Apple and Android devices (smartphones,
tablet computers, and laptops). EU: EN60950-
1, North America UL listed to UL/CSA, 60950-
1 Make-( Axis/ Pelco /Honeywell )
SITC of AV 4U- Wall mounting Rack with 1
677 85 FAN, 6Skt PDU, H/D Self, 1no Cable NOS 4.00 10030.00 40,120.00
Manager and H/W Screw Pkt.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
S/F of 24 port POE unmanaged Switch with 2
S/F of 24port Patch pannel loaded with
680 88 S/L of CAT6 UTP Cable Grey METER 3500.00 49.56 1,73,460.00
681 89 S/L of Fibre Optical Cable Black METER 800.00 127.44 1,01,952.00
S/F of 55" SMART LED DISPLAY
UNIT with inbuild speaker
S/F of Fiber Module (CISCO/TP
684 92 S/F of CAT6e 1 meter Patch Cord NOS 50.00 247.80 12,390.00
685 93 S/F of 8 Port POE Switch With 2 SFP Port NOS 2.00 14750.00 29,500.00
686 94 S/F of PVC pipe, flexible and accessories. METER 2000.00 88.50 1,77,000.00
687 95 S/f Of PVC Box with connector NOS 50.00 70.80 3,540.00
SITC of AV 16U-600W/600D Floor Standing
Rack with 18 2nos FAN, 6Skt PDU, H/D Self,
1no Cable Manager and H/W Screw Pkt. Make-
Valrack/Netrack/APW
Configutation, Testing and Commissioning of
689 97 the 19 Surveillance system with 5 years JOB 1.00 70800.00 70,800.00
690 98 Kayakalpa_Quality Certification 0 0.00 0.00 0.00
Energy Audit by BEE Certified Energy Auditor (
691 99 Includes the Auditors' fee, Audit Report fees, Set 1.00 354000.00 3,54,000.00
Certification Fees and other incidentals)
Procurement of AQI for outdoor and critical
Areas ( For DHH 6 Units, CHC-3 Units, )
Procurement of Renewable Energy Materials (
693 101 Under Eco-Friendly)- Potable Bio-Gas Plant, Set 1.00 87320.00 87,320.00
Solar Light at BMW Area)
Sensor Based Lights in Bath Rooms, Store
694 102 Rooms, Herbal garden (Energy Efficient Each 26.00 1180.00 30,680.00
Facility-Under Eco-Friendly Hospital)
695 103 Procurement of Watermeter Each 26.00 3776.00 98,176.00
Procurement of Areators (For water
696 104 conservation) -At Bathrooms, Handwashing Each 3.00 1321.60 3,964.80
Stations, Kitchen areas)
Development and printing of Posters and SOPs
697 105 (Subject Specific -especially for Eco-Friendly Each 67.00 1652.00 1,10,684.00
Hospital, which also includes designing cost)
Procurement of Air Purifier (4 or 5 star, UV-C,
HEPA Technology Air purifier))-
Indoor/Out door sports materials procuremnts
699 107 (Eco-Friendly Hospital), Carrom, Chess, Set 1.00 24780.00 24,780.00
Badminton, Vollyball
Surgical Scrub Station (stainless Steel)-
1200X600X1000 Mm Ht, Each Cost INR
75000, (DHH-LR, MOT, Old-OT, SNCU), CHC-
Automatic Liquid Soap dispenser touch less-
wall mounted DHH-63 Units, CHC-15
Sinages/Important Information for visually
702 110 challeged/impaired persons (Braille)- (DHH- Each 7.00 3304.00 23,128.00
7displays, CHC-3 displays)
Exhaust fan with Hooding at Kitchen &
703 111 Bathroom (Eco-Friendly Hospital) DHH- 17 Each 17.00 3776.00 64,192.00
nos. CHC-09 nos
Water Heater-(Geyser) (10 liters)-DHH ( Old
Building-02, New Building-05), CHC( 04)
705 113 Amenities for cafeteria (Chair, Table, Shelf) SEt 1.00 61360.00 61,360.00
Procurement of eco-friendly office stationary
under Eco-friendly category of Kayakalp
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
707 115 Sub-Total of Other Works 0 0.00 0.00 1,29,69,947.46
Sub-Total for "AMA HOSPITAL" projects
in the facilities of DHH Paralakhemundi
"AMA HOSPITAL" projects in the facilities
of CHC Chandragiri
Dismentling of Old tile including all etc
required to complete the work.
Supplying fitting and fixing of vetrified tile non
sketing of size(600x600) mmof approved
quality including all etc required to complete
Supplying fitting and fixing of Glazed wall tile
of size(300x600) of approved
quality(SOMANY/JONSON/KAJRIYA) including
all etc required to complete the work.
Dismentling of Old door and window including
all etc required to complete the work.
Supplying and installing uPVC- Casement
openable doors made out of lead free green
profiles of KÖMMERLING make with a
GREENLINE mark with frame dimension of
58mm x 69mm x 50mm for doors and sash
dimension of sash dimension of 58mm x
93mm x 54mm for doors with corners fusion
welded, fully reinforced with Galvanized steel
of 1.2 mm to 2 mm. The sash will be fitted
with 6mm clear glass (toughened). The
physical properties of the profiles like Vicat
softening temperature, density, tensile
strength, hardness, weatherability, impact
715 5 strength and Modulus of Elasticity should be sqm 22.91 10576.34 2,42,356.44
tested in accordance with ASTM/DIN-ISO
standards and the thermal conductivity as per
IS standards. The profile manufacturer should
be a certified member of IGBC and should
have extrusion facility in India and the
windows to be assembled and installed by an
authorised fabrication partner . The windows
must be installed complete with all kinds of
ironmongery (including EPDM gaskets,bridging
wedges and glass packers) and with suitable
water draining system. Application of Silicon
sealant from Inside / Outside of Dowcorning /
GE or equivalent.
Dismentling of False ceiling including all etc
required to complete the work.
Supplying fitting and fixing of false ceiling with
717 7 andize frame including all etc required to sqm 177.02 1892.01 3,34,929.50
complete the work.
Earth work excavation of foundation in all kind
718 8 of soil including all etc required to complete Cum 94.38 244.02 23,030.99
Supplying and filling foundation and plinth
with sand, well watered and rammed including
all cost, conveyance, royalty, taxes etc.
CC (1:3:6) in foundaton and floor using hard
Fly Ash Brick in Cement Motor (1:6) in
Foundation & Plinth etc complete.
CC M30 grade with 12MM to 20mm and down
722 12 graded size CBHG chips including hoisting and Cum 37.97 7494.77 2,84,576.42
laying, watering etc complete
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
R C C M-25 grade with 20mm and down
723 13 graded size CBHG chips including hoisting and Cum 22.66 17008.99 3,85,423.76
laying, watering etc complete
Fly Ash Brick in Cement Motor (1:6) in
Superstructure etc complete.
12mm thick cement plaster in cement mortar
(1:6) etc complete.
16mm thick cement plaster in cement mortar
(1:6) etc complete.
Strengthening, cutting,bending binding of
steel etc complete
Painting two coats with approved weather seal
730 20 paints of approved colour, shade on wall sqm 3056.41 104.19 3,18,459.58
surface etc comeplete
Priming one coat with approved Water Bound
731 21 Wall cement Primer on Plastered Surface in sqm 7832.72 81.07 6,34,967.28
Applying two coats with enamel paint to iron
732 22 grill over a coat of primer including alletc sqm 211.43 189.74 40,117.81
required to complete the work.
Applying two coats with putty for smooth
733 23 surface of including all etc required to sqm 2451.05 82.72 2,02,745.56
complete the work.
Applying two coats with plastic emulsion paint
over putty work for smooth surface of
including all etc required to complete the
Earth work excavation of foundation in all
735 25 kinds of soil including all etc required to Cum 47.73 244.02 11,647.86
complete the work.
Supplying sand filling in foundation with well
736 26 watering with all etc required to complete the cum 20.05 915.68 18,362.91
CC (1:3:6) using 40mm size cbhg metal of
737 27 approved quality with well watering with all cum 10.48 6355.01 66,592.49
etc to complete the work.
CC (1:2:4) using 12mm size cbhg chips of
738 28 approved quality with well watering with all cum 31.75 8131.73 2,58,150.29
etc to complete the work.
R.C.C. work of M-25 grade with 20mm and
down grade black hard granite (crusher
broken) stone chips including hoisting and
Fly ash brick masonry(1:6) with well watering
with all etc required to complete the work.
Supplying fitting and fixing of MS angle with
cahannel for cow catcher of approved quality
including all etc required to complete the
Supplying corrosion resistance steel including
cutting ,bending,binding in proper position
including all etc required to complete the
12MM thick cement plaster (1:6) OVER BRICK
749 39 MASONRY with well watering including all etc sqm 88.07 183.84 16,191.26
required to completete the work.
Dismentling of Brick masonry for opening
750 40 including all etc required to completete the cum 27.10 1370.81 37,151.81
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Dismentling of cement concrete for opening of
751 41 including all etc required to completete the cum 141.70 177.96 25,215.45
Applying two coats with WEATHER paint over
752 42 a coat of primer including all etc required to SQM 641.8216 107.50 68,994.53
complete the work.
Supplying fitting and fixing of black
/blue/brown ACP board of approved quality
753 43 with al frame for main gate including all etc sqm 61.33829 2596.00 1,59,234.20
required to complete the work as per the
instruction of Engineer in charge.
Supplying fitting and fixing of square steel
pipe gate of approved qualite for main gate
including all etc required to complete the work
as per the instruction of Engineer in charge.
Supplying fitting and fixing of vetrified tile
755 45 (600x 600) mm of approved quality including sqm 37.17 1284.67 47,757.10
all etc required to complete the work.
Supplying fitting and fixing of wall tile (600x
756 46 300) mm of approved quality including all etc sqm 23.79 1408.68 33,515.16
required to complete the work.
Earth work in excavation of foundation inall
kinds of soil with all lead and lift including
757 47 dressing and leveling the bed and depositing Cum 848.43 244.02 2,07,037.28
the excavated materials with all cost,
conveyance etc. complete.
Supplying and filling foundation and plinth
with sand, well watered and rammed including
all cost, conveyance, royalty, taxes etc.
CC (1:3:6) in foundaton and floor using hard
Fly Ash Brick in Cement Motor (1:6) in
Foundation & Plinth etc complete.
P C C (1:2:4) grade with 20mm and down
761 51 graded size CBHG chips including hoisting and Cum 90.29 8131.73 7,34,214.26
laying, watering etc complete
Supplying fitting and fixing of paver block of
762 52 approved quality including all etc required to sqm 1015.09 1020.70 10,36,102.36
complete the work.
12mm thick cement plaster in cement mortar
(1:6) etc complete.
16mm thick cement plaster in cement mortar
(1:6) etc complete.
Painting two coats with approved weather seal
765 55 paints of approved colour, shade on wall sqm 390.92 111.04 43,406.97
surface etc comeplete
Priming one coat with approved Water Bound
766 56 Wall cement Primer on Plastered Surface in sqm 390.92 81.07 31,690.32
Earth work excavation of foundation in all
767 57 kinds of soil including all etc required to cum 329.51 244.02 80,407.57
complete the work.
Supplying sand filling in foundation with
768 58 well watering with all etc required to cum 164.75 915.68 1,50,861.39
complete the work.
CC (1:3:6) using 40mm size cbhg metal of
769 59 approved quality with well watering with all cum 56.12 6355.01 3,56,658.61
etc to complete the work.
CC (1:2:4) using 12mm size cbhg chips of
770 60 approved quality with well watering with all cum 42.52 8131.73 3,45,736.99
etc to complete the work.
12MM thick cement plaster (1:6) OVER BRICK
771 61 MASONRY with well watering including all etc sqm 157.77 183.84 29,005.66
required to completete the work.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Dismentling of Brick masonry for opening
772 62 including all etc required to completete the cum 27.10 1370.81 37,151.81
Dismentling of cement concrete for opening of
773 63 including all etc required to completete the cum 141.70 177.96 25,215.45
Applying two coats with WEATHER paint over
774 64 a coat of primer including all etc required to SQM 641.82 104.19 66,873.96
complete the work.
Supplying fitting and fixing of industrial floor
775 65 tile (300mmx300mm) size of approved quality sqm 278.81 1183.89 3,30,081.97
including all etcrequired to complete the work
Applying two coats with enamel paint to wood
776 66 and iron door and window with grill with all etc sqm 72.75 189.74 13,803.48
to complete the work.
Supplying fitting and fixing of GCI Sheet
777 67 including all etc required to complete the sqm 139.41 1021.04 1,42,338.38
Providing and fixing 15 cm wide, 45 cm overall
semi-circular plain G.S. sheet gutter with iron
778 68 brackets 40x3mm size, bolts, nuts and 0 0.00 0.00 0.00
washers etc., including making necessary
connections with rain water pipes complete.
0.80 mm thick with zinc coating not less than
Extra for providing and fixing wind ties of 40x
6 mm flat iron section.
Providing and fixing precoated galvanised iron
profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-
charge) 0.50 mm (+ 0.05 %) total coated
thickness with zinc coating 120 grams per sqm
as per IS: 277, in 240 mpa steel grade, 5-7
microns epoxy primer on both side of the
sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25
781 71 microns minimum to avoid scratches during Sqm 269.42 792.43 2,13,493.51
transportation and should be supplied in single
length upto 12 metre or as desired by
Engineer in-charge. The sheet shall be fixed
using self drilling /self tapping screws of size
(5.5x 55 mm) with EPDM seal, complete upto
any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins, rafters
and trusses and including cutting to size and
shape wherever required
Providing and fixing precoated galvanised steel
sheet roofing accessories 0.50 mm (+0.05 %)
total coated thickness, Zinc coating 120 grams
per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side
of the sheet and polyester top coat 15-18
microns using self drilling/ self tapping screws
Supplying fitting and fixing of MS square pipe
783 73 and perlin in Veccine front shredder including kg 6944.84 83.43 5,79,380.22
all etc required to complete the work.
784 74 Sub-Total of Civil Works 0 0.00 0.00 1,35,83,585.45
785 1 Plumbing Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to
IS:15778, having thermal stability for hot &
cold water supply, including all CPVC plain &
786 2 brass threaded fittings including fixing the pipe 0 0.00 0.00 0.00
with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete
as per direction of Engineer-in-Charge
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
GI/PVC pipes, class-IV (10 k.g. F/cm) on
firming I.S.4985 of the following nominal bore,
tube fittings and clamps including making
good the wall, ceiling and floor, testing all
complete as per specification and direction of
the Engineer in charge.
792 8 20mm dia PVC ASTM pipe (sch-80) Mtrs. 20.00 161.66 3,233.20
793 9 25mm dia PVC ASTM pipe (sch-80) Mtrs. 20.00 221.96 4,439.16
794 10 32mm dia PVC ASTM pipe (sch-80) Mtrs. 20.00 291.70 5,833.92
795 11 40mm dia PVC ASTM pipe (sch-80) Mtrs. 20.00 383.50 7,670.00
Supplying all materials, labour T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all joiniting
796 12 materials including cost & conveyance of all 0 0.00 0.00 0.00
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Con-CHR-
053KN Jaquar make)
15mm dia CP two in one bib cock (Con-CHR-
041KN Jaquar make)
799 15 15 mm dia CP S.B. Bib cock(CON-CHR-037KN) Each 20.00 1277.70 25,554.08
15mm dia CP Long Body Bib cock (Con-CHR-
107KN Jaquar make)
20mm dia CP consealed stop cock(Con-CHR-
083KN Jaquar make)
802 18 25mm dia brass full way valve (Shakti make) Each 10.00 1095.28 10,952.76
803 19 32mm dia brass full way valve (Shakti make) Each 5.00 1603.50 8,017.51
804 20 40mm dia brass full way valve (Shakti make) Each 5.00 2035.85 10,179.27
15mm dia CP Health faucet (Con-ALD-MCH-
573 Jaquar make)
806 22 15mm CP Extension piece Each 100.00 69.97 6,997.40
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and fixing
rotational moulded polyethylene cylindrical
vertical water storage tanks conforming to
IS:12701/1996 including cutting holes through
the tank and fixing mild steel tubes and
fittings and providing extra sockets and jam
nuts, fixing ball valve etc. including hoisting
upto a height of 5 metres above ground level
and placing the tank to the required position
and providing 5.40 mtr. lengthx0.25 mtr width
KB brickwork in cement mortar (1:6) of
0.46m height in staging and 0.13mtr thick
circular protection wall of 0.46mtr height to
809 25 support the tank,12mm thick cement plaster 0 0.00 0.00 0.00
in cement mortar (1:6) over brick work, RCC
slab of size 1.60mX1.60m and 0.10m thick
,RCC beam of 0.25mx0.30m and 3.40m
average length in cement concrete (1:2:4)
using 12mm size crusher broken hard black
granite chips and required steel reinforcement
including centering and
shuttering,watering,curing ,cost of all
materials,conveyance of all materials to
worksite , payment of royalty, all taxes etc.all
complete as per approved drawing , P.H.
specification and direction of Engineer-in-
810 26 2000 liters capacity PVC water storage tank Each 6.00 42437.76 2,54,626.54
supplying all materials, labour, T&P and
cutting holes through existing brick work
including making good the damages in cement
mortar (1:4) for taking G.I. Pipes and fittings/
811 27 P.V.C. pipes and fittings including watering, 0 0.00 0.00 0.00
curing, cost & conveyance of all materials to
worksite, payment of royality, taxes etc. all
complete as per direction of Engineer-in-
Supplying all materials , labour, T&P and
cutting holes in RCC floors and roofs upto
19cm thick for passing P.V.C pipes and G.I
fittings etc. , and repairing the holes after
insertion of pipe etc. with cement concrete
(1:2:4) including finishing complete so as to
make it leak-proof as per P.H. specification
and direction of Engineer-in-charge
Supplying all materials, labour, T&P and
cutting grooves in pucca floors and walls for
taking G.I./P.V.C. pipes and making good the
815 31 damages including watering , curing , cost & 0 0.00 0.00 0.00
conveyance of all materials to worksite,
payment of royality, taxes etc all complete as
per direction of the Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fitting
and fixing U-PVC SWR soil waste ventilating
pipes and fittings of the following outside
diameter conforming to ISI No 13592/1992 to
walls with nails, bobbins and wooden plugs or
laying in trenches including jointing with
supply of approved rubber lubricant by non-
heat application method/as per manufacturer's
specification, testing, earthwork in excavation
in all kinds of soil and refilling of trenches ,
cost & conveyance of all materials to worksite,
payment of taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
818 34 110mm U-PVC SWR Pipe (Supreme /Ashirvad) Mtr. 100.00 541.38 54,138.40
110mm U-PVC ‘P’ Trap(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC door bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC offset without ear(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Cowl(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC S/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC D/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Door tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Socket(Ori
Plast/Finolex/Supreme Make)
Supplying all materials, labour, T&P and fixing
vitreous china water closet, squatting pan
(Indian type W.C pan/Orissa pattern squatting
pan) duly embedded in cement concrete
(1:5:10) using 4cm size hard granite metal
including fixing a pair of vitreous china
250mm x 130mm x30mm footrest, fixing
100mm dia HCI 'p' or 's' trap (with/without
50mm dia horn) for water colset squatting pan
including jointing the trap with pan in cement
mortar (1:1) cutting the floor and mending
good the damages , cost & conveyance of all
materials to worksite, payment of royality ,
taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
580mm size Orissa pan
(Hindware/Parryware/Neycer make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or M.S.
brackets complete with fittings such as
siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP
brass handle,unions and couplings for
connection with inlet, outlet and overflow
831 47 pipes, 32mm dia CP long flush bend, 15mm 0 0.00 0.00 0.00
dia pvc inlet connection pipe including cutting
holes and making good the same and
connecting the flush bend with cistern and
closet and connceting the inlet pipe with
suupply main , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm.
832 48 Dia CP long flush bend ( Slimline-white- Each 30.00 1853.07 55,592.16
Parryware make )
Supplying all materials, labour, T&P and fixing
the following vitreous china Wash Down Water
Closet(European type W.C. pan)with integral
'p' or 's' trap to the floor with wooden plug and
chromium plated pedestal screws including
jointing the trap with soil pipe in cement
833 49 mortar (1:1) fixing plastic seat and cover for 0 0.00 0.00 0.00
wash down water closet with chromium plated
brass hinges and rubber buffers including
polishing , cost & conveyance of all materials
to worksite, payment of royality, taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
European water closet with 'p'
trapplain(Hindware/Parryware/Neycer make)
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs, screws
and cement etc, fixing pedestal for wash basin
recessed at the back for the reception of pipes
and fittings, fixing PVC waste pipe of 32mm
nominal diameter for wash basin including
brass check nut complete, fixing pillar taps
capstan head screw down high pressure
lettered 'Hot' and 'Cold' with long screws,
shanks and back nuts of 15mm dia nominal
bore, fixing 15mm dia PVC inlet connection
pipe and making connection with pillar cocks
and supply mains for wash basin, fixing 32mm
dia CP brass waste, cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as perP.H specification and
direction of the Engineer-in-charge
550mmx400mm W.H.basin
(Hindware/Parryware/Neycer make)with
836 52 15mm dia C.P.pillar cock (Plaza make) with Each 20.00 4636.10 92,722.04
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P for fitting
& fixing plain edge kitchen/wall sink of all
standard sizes with a pair of bracket, C.P.
837 53 waste, trap & P.V.C. waste pipe & painting Each 4.00 5843.48 23,373.91
brackets including supply of cement concrete
& mortar etc. all complete. 24” x 18” x 10”
Supplying all materials, labour, T&P and fixing
standard sized CP towel rail complete with CP
838 54 brass brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of the
Engineer in charge
839 55 25mmx600mm long CP towel rail Each 20.00 827.65 16,553.04
Supplying all materials, labour, T&P and fixing
standard sized glass-shelf with CP brass
brackets and guard rail complete fixed to
wooden plugs with CP screws as per
specification and direction of Engineer in
600mmx125mm plate glass shelf with CP/NP
Supplying all materials, labour, T&P and fixing
mirror of superior glass mounted on
6mm.thick A.C. sheet or ply wood sheet and
fixed to wooden plugs with CP screws and
washers complete as per specification and
direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled
Supplying all materials, labour, T&P and fixing
CP soap holder complete with CP brass
845 61 brackets fixed to wooden plugs with CP screws 0 0.00 0.00 0.00
as per specification and direction of the
Engineer in charge
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red
lead and yarn nail complete as per direction of
Engineer in charge.
848 64 ½” x 5” CP Shower (Plaza Deluxe Make) Each 20.00 570.53 11,410.60
Supplying all materials , labour, T&P and
cutting holes through existing brick or laterite
masonry wall for taking U-PVC pipes and
fittings including making good the damages
etc. all complete as per P.H. specification and
direction of Engineer-in-charge
Supplying all materials , labour, T&P and
cutting of RCC chajja for taking HCI or U-PVC
pipe and fittings including making good the
damages etc. all complete as per P.H.
specification and direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside
size 760mmx760mmx460mm with cement
concrete (1:3:6) using 40mm size crusher
broken hard black granite metal on bed , KB
brick work in cement mortar (1:6) in
foundation and plinth, moulding and shaping
the channel inside and benching with cement
concrete (1:2:4) using 12mm size crusher
broken hard black granite chips, 12mm thick
cement plaster (1:3) with cement punning to
inside, cement flush pointing (1:3) to outside,
R.C.C cover slab (1:2:4) using 12mm size
crusher broken hard black granite chips with
R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc.all complete
as per approved drawing, P.H specification
and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast
cover slab in cement concrete (1:2:4) mix
using 12mm size crusher broken HG chips,
foundation concrete (1:4:8) using 40mm size
crusher broken HG metal on bed and around
853 69 trap, KB brick work in cement mortar (1:6) in Each 10.00 1719.97 17,199.68
foundation and plinth and inside 12mm thick
cement plastering (1:3) finished with a
floating coat of neat cement including fixing
100mmx100mm size HCI gully trap,
150mmX150mm size CI grating etc.all
complete as per drawing, specification and
direction of Engineer-in-charge
Supplying all materials labour T&P filling sand
in lavatories well watered and rammed
including lead of materials to work site.234 x
Supplying all materials, labour, T&P and
providing cement concrete ( 1:3:6 ) with
40mm size crusher broken hard black granite
metal including watering, curing,cost of all
materials, conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge. 234 x 0.10
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with
12mm size crusher broken hard black granite
chips including watering, curing,cost of all
materials, conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge 234 x 0.10
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing ceramic tiles in floors,
treads or steps and landing on 25mm thick
bed of cement mortar (1:1) ( 1 cement : 1
sand ) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
site , payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge ( ceramic floor
tiles of premium grade having thickness 7mm
to 8mm conforming to IS 13755 of size
Kajaria/Somany/Johnson tile 60cmx60cm
special printed series to be pre-approved by
the Engineer-in-charge )
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:4) on
brick work including watering,curing,cost of all
858 74 materials, conveyance of all materials to Sqm 150.00 185.50 27,824.40
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in
dado skirting on 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
859 75 site , payment of royalty, all taxes etc all sqm 130.41 1408.68 1,83,706.48
complete as per P.W.D specification and
direction of Engineer-in-charge( ceramic wall
tiles of premium grade having thickness
6.5mm to 6.7mm conforming to IS 13753 of
size Kajaria/Somany/Johnson tile 60cmx30cm
special plain / printed series to be pre-
approved by the Engineer-in-charge )
Factory made single leaf Solid WPC (Wood
polymer) composite door shutter of 25mm
thickcompacted with wood grain finish
structural foam panel of 29mm thickness and
a density of 20kg/cu.mtr shall be used as core
material for fitting the metal fittings such as
tower bolts, aldrops, handles etc shall be
provided. A structural adhesive compatible
with (EPS) foam shall be used for bending the
core material, The material and process for
860 76 manufacturing the door shutters shall conform Rmt 20.00 4048.11 80,962.16
to RV-TIFAC composites Design Centre's
standards and specifications and the door
shutters Conforming to relevant
I.S.specification. The finish of door shutter will
be plain colour white/ Ivory/ Beige/ Light
grey/ Mahogany/ Teak wood or any other
colour using high quality pigments. Three
heavy whight mild steel butt hinges type-I(ISI
marked) size 100mm are to be fitted on one
side of shutter.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Factory made Solid WPC door frame of size
95mmx55mm fabricated .The door frame
consist of four segments which are provided
with plug-in-socket arrangement in-situ in the
mould. The segments are plugged in and are
joined together by means of screw. The WPC
frame shall be provided with The material and
process for manufacturing the door frames
shall conform to Relavent I.S.specification.
The finish of door frame will be plain colour
white/ Ivory/ Beige/ Light grey/ Golden
brown/Mahogany/ Teak wood/sand
stone/Champagne/Pastel blue or any other
colour using high quality pigments complete
in all respect as per specification and direction
of the Engineer in charge
Supplying all materials, labour, T&P and laying
in trenches (to level or slope) unplasticized
P.V.C. pipe conforming to IS 4985/2000 of the
following out side dia for class- 3 (0.60mpa )
including jointing with supply of approved
solvent cement by non-heat application
method/as per manufacture's specification,
provoding and laying in trench cement
concrete (1:4:8) with 40mm size hard granite
metal in the type C-1 standard bedding
surrounding or encasing including concrete for
bedding and curing etc all complete as per
P.H. specification and direction of the Engineer
Supplying all materials labor T&P and
constructing MH chamber of sizes earth work
in excavation in all kinds of soil CC(1:1:8) with
black granite chips size 46mm brick work with
K.B. brick having crossing strength not less
than 75 Kg /CM2 to 90 Kg/CM2s in
CM(1:6)12mm C.P(1:8) inside MH chamber
over benching with cement slush pointing
865 81 (1:3)outside the MH chamber providing 0.00 0.00 0.00 0.00
painting MS or CI step iron RCC(roof of slab
with CC(1:2:4)with black granite chips size
12mm bending binding tying the grills placing
of the reinforcement providing RCC color of
required size refilling the cavity around the MH
chamber with excavated earth including
channeling the bed of MH etc all complete as
per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18”
dia RCC Cover )
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials labour T&P and
constructing 1.20m dia x 2.00 m deep soak
way pit with dry brick having crossing strength
not less than 75Kg/CM2 to 99Kg/CM2 in
CM(1:6) for the remaining 0.4572mm height
of wall at top CC(1:3)inside and outside inside
fill with dry brick khoa size 38mm ,CM thick
867 83 RCC perforated slab to a height of 1.9012m Each 4.00 19544.46 78,177.83
from bottom covered by means of 50mmthick
RCC wall cover in pieces filled with iron plugs
including earth work in excavation refilling of
cavity around the pit and painting the iron
works complete as per PHD design and
specification including carriage of all materials
868 84 Sub-Total of Plumbing Works 0 0.00 0.00 21,66,466.37
869 85 Electrical Works 0 0.00 0.00 0.00
870 1 AUDIO VIDEO SYSTEM AT OPD 0 0.00 0.00 0.00
Supply,Installation,Testing & Commissioning
of 55 INCH (139 cm) ultra HD (4K) LED
smart TV , with launch year must be 2023 ,
inbuilt speaker of minium 40 watt , inbuilt
storage memory of minium 8 GB , support ios
, android , inbuilt wifi , bluetooth connection ,
port for external USB drive .(Make:-SONY /LG
Supply and fixing of Modular metal box on
surface or in recess with suitable size of
Modular cover in front including providing and
fixing 16Amp socket outlet and 16Amp
Modular switches connection (Make of
Modular Switch- Schineider cripsal x
/panasonic europa /Legrand myrius / L&T
englaze or eq or eq )
Supply and fixing of modular 6Amp plug with
6Amp switch on existing board (Make of
873 4 Modular Switch- Schineider cripsal x Each 4.00 227.74 910.96
/panasonic europa /Legrand myrius / L&T
Recessed wiring to submain in the following
sq.mm FRLS PVC insulated single core
multistrand copper conductor of ISI marked
conforming to IS-694/1990 in the following
dia non-metallic heavy duty flexible conduit
874 5 1.6 mm thick along with the following sq.mm Mtr 30.00 192.34 5,770.20
FRLS PVC insulated single core multistrand
copper conductor as earth wire as
required.(Make of wire-Finolex /L&T / Havells /
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply,Installation,Testing & Commissioning
of 7 Mtr long Galvanized PU painted octagonal
pole with solar pannel of 150 watt / 165 watt /
12 v poly (make - luminous ) with suitable
angel pannel holder and bracket on top of
pole with 60 watt solar LED light ( 2 IN 1)
battery inbuilt in light , fully concrete
foundation base with stell rods of jindal , 8
SWG aluminium wire for earthing of pole ,with
all other wiring material ( 3 core 4 sq mm
flexible copper DC cable 5 mtr ) ,MC 4
Connector , Pole Thickness-3.1mm with
foundation nuts and bolts and bracket of
suitable for holding 1 No of 60 Watt LED DC
light (2 in 1) . pole Make (Bajaj or
equivalent of Klite/Valmount) with 60 W LED
solar DC light with( 2 in 1) and battery in
built .(Make:-Bajaj / Philips/panasonic )
Supply,Installation,Testing & Commissioning
of 55 INCH (139 cm) ultra HD (4K) LED
smart TV , with launch year must be 2023 ,
inbuilt speaker of minium 40 watt , inbuilt
storage memory of minium 8 GB , support ios
, android , inbuilt wifi , bluetooth connection ,
port for external USB drive .(Make:-SONY /LG
Supply and fixing of Modular metal box
on surface or in recess with suitable size
of Modular cover in front including
providing and fixing 16Amp socket outlet
and 16Amp Modular switches connection
(Make of Modular Switch- Schineider
cripsal x /panasonic europa /Legrand
myrius / L&T englaze or eq or eq )
Supply and fixing of modular 6Amp plug
with 6Amp switch on existing board
878 9 (Make of Modular Switch- Schineider Each 4.00 227.74 910.96
cripsal x /panasonic europa /Legrand
myrius / L&T englaze or eq
Recessed wiring to submain in the following
sq.mm FRLS PVC insulated single core
multistrand copper conductor of ISI marked
conforming to IS-694/1990 in the following
dia non-metallic heavy duty flexible conduit
879 10 1.6 mm thick along with the following sq.mm 0.00 0.00 0.00 0.00
FRLS PVC insulated single core multistrand
copper conductor as earth wire as
required.(Make of wire-Finolex /L&T / Havells /
SUPPLY,ERECTION AND TESTING OF PATIENT
881 12 CALLING SYSTEM / DIGITAL DISPLAY FOR 0.00 0.00 0.00 0.00
QUEUE MANAGEMENT
Touch screen based token dispenser -
upto 32 services
Token calling unit with LCD display -
883 14 keys'PREV' and 'NEXT', one 'CALL' key, Nos 1.00 14720.50 14,720.50
one 'RETAIN' key and a 'CLOSE' key
Token hub - 20 ports for Conneting All
Token display unit- single line ; 6 digits; 4
digit for token no, 2 digits for counter no
TV interface unit ( model name :
887 18 32 inch LCD screen for waiting hall Nos 1.00 21830.00 21,830.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
888 19 HDMI cable 2 metres Nos 1.00 1770.00 1,770.00
889 20 Supply of D-Link CAT6 cable and PVC conduit Nos 1.00 88500.00 88,500.00
890 21 Installation testing and commissioning Nos 1.00 23600.00 23,600.00
SUPPLY,ERECTION AND TESTING OF IP
BASED CCTV CAMERA
Supply & Installation of Network IP RUGGED
DOME with 1/3"4MP CMOS Image sensor
having 2688x1520 resolution and minimum
illumination. of 0.03 lux [email protected] Colour of
148 ft (45m IR Distance) Smart IR, WDR (120
dB), 3D DNR Noise reduction, upto 4
configurable zones for Privacy masking &
motion Detection, BLC /HLC, Onvif Profile S,
Profile G, with H.265, IR, TDN and 2.7-
13.5MM MFZ lens, POE 8.5 W max power
Consumption, IP67 & IK10, 16X Digital Zoom,
SD card provision of 128GB UL Listed.
Supply & Installation of Network IP
BULLET Camera with 1/3"4MP CMOS
Image sensor having 2688x1520
resolution and minimum illumination of
0.03 lux [email protected] Colour of 98 ft
(30m IR Distance) Smart IR, WDR (120
dB), 3D DNR Noise reduction, upto 4
configurable zones for Privacy masking &
motion Detection, BLC /HLC, Onvif Profile
S, Profile G, with H.265,IR,TDN and 3.6
MM fixed lens, F 2.0, POE 11.74 W max
power Consumption, IP66, 16X Digital
Supply, Installation, Testing & Commissioning
of IP Network TDN PTZ Camera with auto
tracking, 1/1.9" CMOS, 2 MP @ 25fps, triple
stream, Min. Illumination required 0.005 lux @
F1.6 (color) & 0.0005 lux @ F 1.6(B/W) or
better, 120dB True WDR or better, Min. Pixels
1920 x 1080, triple stream, FL 4.8mm-120
mm Zoom 25x motorized focus zoom lens &
16 x digital zoom, BLC, HLC, 3DNR, Electronic
Image Stabilitzation, Privacy Mask,
Internal/External Illuminatrion range with
upto 200m IR distance, Dual channel Audio
G.711a/G.711u/AAC, 128GB SD card support,
Alarm: 7 In/2 out, PoE, H.264 High Profile and
MJPEG, POE Class 5 and 12V DC/24VAC, IP
66, Having Operating temp range: -10°C to
65° C. Certifications: ONVIF Profile S
compliant, UL, CSA 60950- 22, CE (EN 50130-
4 & EN 55022), FCC Part 15 & ROHS
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply & Installation of 64 Channel fully
Featured NVR with High decoding capability
for Ultra 4K HD viewing and recording, up to
12MP(4K) resolution live view, Preview &
Playback, Internal storage supports 8 HDDs
expandable up to 64 TB (8 TB each). Record
bit Rate (320Mbps), 2 HDMI/VGA
simultaneous video, usb ports 3 (2 rear
PC communications and keyboard).) The Quick
Wizard and full PoE support (for up to 16
channels) make setup fast and easy. Monitor
from anywhere using the mobile apps for both
Apple and Android devices (smartphones,
tablet computers, and laptops). EU: EN60950-
1, North America UL listed to UL/CSA, 60950-
SITC of AV 4U- Wall mounting Rack with 1
896 27 FAN, 6Skt PDU, H/D Self, 1no Cable NOS 1.00 10030.00 10,030.00
Manager and H/W Screw Pkt.
S/F of 24 port POE unmanaged Switch with 2
S/F of 24port Patch pannel loaded with
899 30 S/L of CAT6 UTP Cable Grey METER 300.00 49.56 14,868.00
900 31 S/L of Fibre Optical Cable Black METER 300.00 127.44 38,232.00
S/F of 55" SMART LED DISPLAY UNIT with
inbuild speaker
902 33 S/F of Fiber Module NOS 7.00 2950.00 20,650.00
903 34 S/F of CAT6e 1 meter Patch Cord NOS 50.00 247.80 12,390.00
904 35 S/F of 8 Port POE Switch With 2 SFP Port NOS 2.00 14750.00 29,500.00
905 36 S/F of PVC pipe, flexible and accessories. METER 200.00 88.50 17,700.00
906 37 S/f Of PVC Box with connector NOS 30.00 70.80 2,124.00
SITC of AV 16U-600W/600D Floor Standing
Rack with 18 2nos FAN, 6Skt PDU, H/D Self,
1no Cable Manager and H/W Screw Pkt. Make-
Valrack/Netrack/APW
Configutation, Testing and Commissioning of
the 19 Surveillance system
909 40 INTERNAL ELECTRICAL 0.00 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Recessed wirring to light point/ fan point/
exhaust fan point/ call bell point with 1.5
sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked Make-
Finolex/Anchor/Polycab/HAVELLS/RR
KABLE/KEI or equievalant reputed make A
catagory ISI marked as approved with 20 mm
dia PVC flexible non metallic conduit FRLS
type ISI marked Make-AKG/Anchor/Havells or
equievalant reputed make A catagory ISI
marked as approved 6A modular type (anti
bactorial & flame retradant type) switch ISI
marked Make-Schneider/legrand/Panasonic or
equievalant reputed make & model A catagory
ISI marked as approved, and ceiling rose ISI
910 41 marked Make- Anchor/Havells of modular 0 0.00 0.00 0.00
type G.I box with metallic cover plate (both
side) (anti bactorial & flame retradant type)
Make-Schneider/legrand /Panasonic or
equievalant reputed make & model A catagory
ISI marked as approved of suitable size,
modular box with 1.5 sq. Mm FRLSH PVC
insulated single core multistandard copper
conductor as earth wire including all
accessories and connection as per direction of
Engineer -in -Charge. CATAGORY AS
FOLLOWS ,complete suitable for IPH standard
hospital. All the switches & sockets should be
warrantied for a replacement period of 2
years against defects with ncessary test
report & Warrnaty certificate to be submitted
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked
Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm dia
PVC flexible non metallic conduit FRLS type
ISI marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI
marked as approved with 6A modular
type((anti bactorial & falme retradant type))
switch ISI marked Make-Schneider/legrand
/Panasonic or equievalant reputed make &
914 45 model A catagory ISI marked as approved, Nos 20.00 1211.86 24,237.20
and ceiling rose ISI marked Make-
Schneider/legrand/Panasonic or equievalant
reputed make & model A catagory ISI marked
as approved of modular type G.I box with
metallic cover plate (both side)(anti bactorial
& falme retradant type) Make-
Schneider/legrand /Panasonic or equievalant
reputed make & model A catagory ISI marked
as approved, of suitable size, modular box
with 1.5 sq. Mm FRLS PVC insulated single
core multistandard copper conductor as earth
wire including all accessories and connection
as per direction of Engineer -in -Charge.
CATAGORY AS FOLLOWS ,complete suitable
for IPH standard hospital.(Maximum 02 nos
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying ,fixing of 6A Plug on the same
board in existing switch board with complete
fitting by 01 no of 6A switch & socket
(modular type)( (anti bactorial & flame
retradant type)) & other required accessories
of ISI marked as approved as per direction of
Engg. -in -Charge. Make-
Schneider/legrand/Panasonic or equievalant
reputed make & model A catagory ISI marked
as approved, complete suitable for IPH
standard hospital.(Maximum 02 nos point in
one circuit).All the switches & sockets should
be warrantied for a replacement period of 2
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( (anti bactorial
& flame retradant type)) with suitable size
modular box & cover(anti bactorial & falme
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
make & model ISI marked as approved ,
complete suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a period of 10 years against
manufacturing defects against which ncessary
test report & Warrnaty certificate to be
submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01 no
of 16A switch & socket(modular type)((anti
bactorial & flame retradant type)) with
suitable size modular box & cover(anti
bactorial & falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge.. Make-Schneider/legrand/Panasonic
or equievalant reputed make A catagory ISI
marked as approved, (For equipement
power)All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 2x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no
of 16A+2 no 6A switch & socket(modular
type) ( (anti bactorial & falme retradant type)
with suitable size modular box & metallic cover
plate (both side)(anti bactorial & falme
retradant type)including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider/legrand /Panasonicor
918 49 equievalant reputed make & model A catagory Nos 10.00 1629.58 16,295.80
ISI marked as approved, (For equipement
power)complete suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of 3x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no
of 16A+3 nos 6A switch & socket(modular
type) ( (anti bactorial & falme retradant type)
with suitable size modular box & metallic cover
plate (both side)(anti bactorial & falme
retradant type)including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider/legrand /Panasonic or
919 50 equievalant reputed make & model A catagory Nos 8.00 2323.42 18,587.36
ISI marked as approved, (For equipement
power)complete suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within warranty
period for acceptance of materials.
Receass wiring for circuit/submain wiring with
the following mentioned size PVC FRLSH/LSZH
insulated, copper conductor, single core cable
(Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE)
or equievalant reputed make A catagory ISI
marked as approved, in recessed PVC conduit
Heavy duty FRLS of mentioned size
(AKG/Anchor/Kinjal or equievalant ISI
marked as approved) as required as per
direction of Engg.-in-Charge. Ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
922 53 conductor in 20 mm dia non metallic heavy Mtr 80.00 171.10 13,688.00
duty flexible conduit.(BDB to LSB/LIGHT
CKT/5A PLUG/INVERTER POINT TO EACH
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor .in 25 mm dia non metallic heavy
duty flexible conduit(LDB to LSB/5A SOCKET)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit .(PDB to PSB/ GAYSER
POINT/AC POINT/ROOM LIGHT CONTROL TO
CORRIDOOR POINT/DG PANEL ESSENTIAL
LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
925 56 conductor in 32 mm dia non metallic heavy Mtr 80.00 289.10 23,128.00
duty flexible conduit.(PDB to PSB/GAYSER.
POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core 2.5
sq. mm copper wire for earth continuty
conductor in 25 mm dia non metallic heavy
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core 4
sq. mm copper wire for earth continuty
conductorin 32 mm dia non metallic heavy
duty flexible conduit .(LFDB TO FLOOR PANEL
TO TPN BDB light ) (4X10+2X4)
4 nos single core 16 sq. mm copper wire for
phase and neutral and 02 nos of single core
10 sq. mm copper wire for earth continuty
conductor in 40 mm dia non metallic heavy
duty flexible conduit.(FLOOR PANEL TO TPN
BDB power) (4X16+2X10)
Supply and drawing of following sizes FRLS
PVC insulated single core multistrand copper
conductor in existing surface / PVC conduit as
Supplying and fixing of following Modular type
switch / socket on the existing switch box /
cover including connections etc as
required.Make-L&T/Legrand/Roma
936 67 5/6Amps modular switchswitch No 20.00 81.42 1,628.40
937 68 5/6Amps modular socket No 16.00 87.32 1,397.12
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
938 69 15/16Amps modular switch No 19.00 128.62 2,443.78
939 70 15/16Amps modular socket No 19.00 177.00 3,363.00
Supplying and fixing of following Modular type
940 71 base & cover as follow.Make- 0 0.00 0.00 0.00
L&T/Legrand/Roma
941 72 Modular blanking plate No 12.00 20.12 241.43
942 73 Modular base & cover for 1 module No 16.00 71.35 1,141.67
943 74 Modular base & cover for 2 module No 14.00 105.20 1,472.76
944 75 Modular base & cover for 4 module No 14.00 146.36 2,048.98
945 76 Modular base & cover for 6 module No 15.00 188.43 2,826.51
946 77 Modular base & cover for 8 module No 15.00 225.03 3,375.39
947 78 Modular base & cover for 12 module No 8.00 320.16 2,561.26
Supplying and fixing 20 amps, 240 volts, SPN,
industrial type socket outlet, with 2 pole and
earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel
948 79 enclosure, on surface or in recess, with Nos 10.00 726.88 7,268.80
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in-Charge.
Supplying and fixing 32 amps, 415 volts, TPN,
industrial type socket outlet, with 4 pole and
earth metal enclosed plug top along with 32
amps. C-series, TP MCB, in sheet steel
enclosure, on surface or in recess, with
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in-Charge.. . Equievalant
949 80 higher model of Make- Nos 2.00 5128.28 10,256.56
Legrand/Schneider/Siemens/panasonic
equievalant reputed make & model A catagory
ISI marked as approved.All the Components
should be warrantied for a replacement period
of 5 years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
cover plate (both side)(anti bactorial type)
plate for modular switches in recess etc as
required as per direction of Engg.-in-Charge.
MAKE-Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
950 81 model A catagory ISI marked as approved .All 0.00 0.00 0.00 0.00
the Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
including cutting the wall and making good the
same in case of recessed conduit as required
as per direction of Engg.-in-Charge .MAKE
KINJAL/ AKG/Anchor or equievalant reputed
make A catagory ISI marked as approved
Supply and fixing modular type indicator on
the existing switch box/cover . Equievalant
higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved as required
as per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and installation of AC starter
Modular type, Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved coil voltage-
415 Volt A.C. & O/L range of 9-14A range on
mod Box of suitable size including modular
958 89 coveras required as per direction of Engg.-in- Nos 10.00 730.42 7,304.20
Charge .All the Components should be
warrantied for a replacement period of 5 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover.
Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved .as required
as per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked
conforming to IS-1258/1987 in place of ceiling
rose as per direction of Engg.-in-Charge .All
960 91 the Components should be warrantied for a EACH 100.00 71.98 7,198.00
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of Blanking plate(modular
type)( (anti bactorial & flame retradant type))
in existing switch box(anti bactorial & flame
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider/legrand /Panasonic ,
961 92 complete suitable for IPH standard hospital.It Nos 10.00 49.56 495.60
should be warrantied for a period of 2 years
against manufacturing defects against which
ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star
Havells/almonard/Anchor/Panasonic/Us
962 93 ha or equievalant reputed make & model Nos 4 3683.96 14,735.84
A catagory ISI marked as approved ) of
exhaust fan in the existing wall, including
fixing & conntection as required as per
direction of Engg.-in-Charge.
Replacement Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1200 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Ushaor
equievalant reputed make & model A catagory
963 94 ISI marked as approved ) including wiring Nos 20.00 2505.14 50,102.80
the down rod of standard length (upto 30 cm)
with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as required
as per direction of Engg.-in-
Charge,Replacement Warranty will be 5
years.. .(With fan Regulator)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy
efficient Recess mounted LED luminaire
made up of CRCA powder coated sheet
steel housing of 595 X 595 mm x 70 mm
size with of not more than 25W and
system lumens output not less than 3250
lumens (130 lm/ wt) with diffusers for
better light transmission and pure effect
with High luminous flux LEDs for better
light output, CRI not less than 80, CCT of
5700-6500 degree K, THD less than
10%,internal surge protection of 3 KV,
complete with Non integrated isolated
electronic driver (protects the output
/secondary side from any disturbance on
the input / primary side ensuring safe
operation)and all other accessories
suitable for operation on140- 270 V, 50
Hz ,L70 @50,000 burning hrs (5 years
warranty)supply .as required as per
direction of Engg.-in-Charge (Make:
Panasonic/LT/Trilux /Philips/Wipro or
equievalant reputed make & model A
catagory ISI marked as approved.) . The
luminaire must be Replacement Warranty
will be 5 years.
Supplying and fixing of Energy efficient
recessed mounted LED luminaire made up of
CRCA powder coated housing, Top opening
clean room LED luminaire of 600 X 600 x 65
mm size with of 45 W and system lumens
output not less than 4500 lumens , IP65 ,dust
free & zero maintenance , anti glare high
transmittance PMMA diffuser , operating
volatge range 150-265 V, high performance
potentiometric electronic driver for zero
maintenance , 2.5 KV internal urge
965 96 protection, L70 B 50: 50,000 hrs., CRI not less Nos 10.00 6615.08 66,150.80
than 80, CCT of 5700-6500 degree K, THD
less than 10%,,IP 65 protection complete
with all other accessories suitable for
operation on 230 V, 50 Hz supply as required
as per direction of Engg.-in-Charge.
(Make:Panasonic /PHILIPS/ Wipro or
equievalant reputed make & model A catagory
ISI marked as approved ) .The luminaire
should be Replacement Warranty will be 5
years. .Each CLEAN ROOM FITTING FOR OT
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
surface mounted square shape 20 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20
watt and lumen output of 1500 lumens, , CRI
not less than 80,CCT of 6000 degree K,THD
966 97 less than 10%, with electronic driver, internal Nos 20.00 1791.24 35,824.80
surge protection of 2.5 KV , L70 B50: 30000
hrs (2 yrs warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of Engg.-in-
Charge. ( Make : Panasonic
/Trilux/Osram/PHILIPS/Wipro or equievalant
reputed make & model A catagory ISI marked
as approved).The luminaire should be
Replacement Warranty will be 5 years
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
130 lumens/watt ) of size 595 x595 x 70 mm ,
,CRI not less than 80,CCT of 5700-6500
degree K,THD less than 10%, with Non
integrated isolated driver (protects the output
/secondary side from any disturbance on the
input / primary side ensuring safe operation),
all other accessories , life : 50,000 burning
hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on
230 V, 50 Hz supply as required as per
direction of Engg.-in-Charge. ( Make :
Panasonic / LT /Wipro/PHILIPS or
equievalant reputed make & model A catagory
ISI marked as approved.) The luminaire
should be Replacement Warranty will be 5
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than 2200
lumen complete with electronic driver and all
other accessories with diffuser having 5 years
warranty i/c connection etc as required as
per direction of Engg.-in-Charge. (
SITC of Sleek LED 10 watt mirror light fitting
with extruded polycarbonate housing,High
optically efficient diffuser,above wash basin
complete with all accessoriesetc. directly on
969 100 wall, including connection with 1.5 sq. mm Nos 10.00 863.76 8,637.60
FRLS PVC insulated, copper conductor, single
core cable and earthing etc. as required as per
direction of Engg.-in-Charge.
SITC of IP 20 Non-integral flexible LED strip
light,High optically efficient diffuser,, 4000K
970 101 with 12 w/mtr @ 5Mtr pool with Driver extra Nos 2.00 1792.42 3,584.84
as required as per direction of Engg.-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of small focus light for
971 102 small monuments as 30W , 5700 K required Nos 2.00 3307.54 6,615.08
as per direction of Engg.-in-Charge
Supplying and fixing extra conduit down rod of
20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
972 103 required as per direction of Engg.-in-Charge . Nos 100.00 38.94 3,894.00
(Note : More than 5 cm length shall be
rounded to the nearest 10 cm and 5 cm or less
shall be ignored)of ISI mark as approved.
Supply and fixing of Electronics socket type
fan regulator.Make-Legrand/Havells/Anchor
Supplying and fixing of following mentioned
way, three pole/single pole and neutral, sheet
steel,double door MCB distribution board, 415
volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall
974 105 be fabricated to withstand IK09,the DB should 0.00 0.00 0.00 0.00
be properly pre-treated with 7 tank process
and duly powder coated, phosphatized with
powder coated finish, on surface/recess,
complete with terminal blocks,with suitable
size FR PVC insulated copper conducter up to
terminal blocks, tinned copper busbar, neutral
busbar, earth bar, din bar.
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting with
100A Copper Bus Bar for each phase, with
neutral Bus bar, Earth Bar & Cable ties for
cable management, prefitted masking sheet,
IP43-IK09 with metal door(FOR LIGHT,POWER
INDOOR,3-PH,POWER LOAD)
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution board
250V on surface/recess complete with tinned
copper bus bar, neutral bus bar, earth bar, din
bar, detachable gland plate, interconnections,
phosphatized and powder painted including
earthing etc. as required (but with out MCB/
RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS
LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
door)(only each EM. CONNECTION UPS LOAD)
8 Way(8+24) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting with
100A Copper Bus Bar for each phase, with
neutral Bus bar, Earth Bar & Cable ties for
cable management, prefitted masking sheet,
IP43-IK09 with metal door(FOR LIGHT,POWER
INDOOR,3-PH,POWER LOAD)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 6-20 amps rating, 240
volts, C series, Double poles MCB of in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The MCB
979 110 should be Replacement Warranty will be 5 Nos 2.00 392.94 785.88
years .MCB should have the fault indication
system in different colour for ON, OFF & TRIP
condition or Mid trip position for Trip
conditions for easier identification of fault.
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles MCB of
Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
980 111 reputed make & model A catagory ISI marked Nos 50.00 155.76 7,788.00
as approved. the existing MCB DB complete
with connections as per direction of Engg.-in-
Charge. MCB should have the fault indication
system in different colour for ON, OFF & TRIP
condition or Mid trip position for Trip
conditions for easier identification of fault.
Supplying and fixing 40 Amps rating, TPN, 415
volts, RCCB,300mA .Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
981 112 approved in the existing MCB DB complete Nos 3.00 2650.28 7,950.84
with connections, testing and commissioning
etc. as required as per direction of Engg.-in-
Charge. .(4W TPN BDB IC)AC ODU
CONTROLLER). The RCCB should be
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABBor equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 63Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge.The RCCB
should be Replacement Warranty will be 5
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
985 116 approved in the existing MCB DB in the Nos 3.00 3116.38 9,349.14
existing MCB DB complete with connections as
per direction of Engg.-in-Charge.(for power
BDB & AC ODU, 8 way TPN BDB IC).The RCCB
should be Replacement Warranty will be 5
S/IT/C Of Earthing with copper earth plate
600 mm x 600mm x 6 mm thick ISI marked
including accessories and providing masonary
986 117 with cover plate having loccking arrangement Nos 2.00 16398.46 32,796.92
and watering pipe etc (WITH charcoal and
salt) as required as per direction of Engg.-in-
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class B
G.I. pipe of 3.0 metre long with arrangements
for fitting/ termination of G.I. flat / wire with
G. I. nut bolts & washers including cost of
987 118 burnt wood charcoal, salt, foreign soil, water Nos 2.00 2954.72 5,909.44
pouring arrangements, brick masonary
enclosure on top with removable RCC cover
complete with labour for excavation of pit in
all kinds of soil & rock as required and as per
direction of Engineer-in-charge.
Providing and fixing 4 mm dia copper wire on
988 119 surface or in recess for loop earthing as Mtr 122.00 113.28 13,820.16
required.as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
Providing and fixing 50mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
Supplying and making brick massonary
pedastal with extra super structure including
cement plastering etc as required as per
direction of Engg.-in-Charge.
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
992 123 following size cables as per direction of Engg.- 0 0 0.00 0.00
in-Charge. Ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free after
sales service within warranty period for
acceptance of materials
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
994 125 following size cables as per direction of Engg.- 0 0.00 0.00 0.00
in-Charge. Ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free after
sales service within warranty period for
acceptance of materials
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
1000 131 trench in one horizental formation including Mtr 5.00 153.40 767.00
excavation ,sand coushing protection covering
and refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM but not exceeding 120 SQ. MM
direct in ground in the trench in one horizental
formation including excavation ,sand coushing
protection covering and refilling the trench etc
as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
120 SQ. MM but not exceeding 400 SQ. MM
direct in ground in the trench in one horizental
formation including excavation ,sand coushing
protection covering and refilling the trench etc
as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
1003 134 exceeding 25 SQ. MM direct in ground in the Mtr 10.00 49.56 495.60
EXISTING PIPE etc as required as per direction
of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
1004 135 25 SQ. MM but not exceeding 400 SQ. MM Mtr 10.00 68.44 684.40
direct in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM in open duct etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
1006 137 25 SQ. MM in open duct 400 SQ. MM direct in Mtr 10.00 54.28 542.80
ground in the EXISTING PIPE etc as required
as per direction of Engg.-in -charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
1007 138 exceeding 25 SQ. MM in surface with shaddle Mtr 10.00 95.58 955.80
and screw etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
1008 139 exceeding 120 SQ. MM From 25 SQ. MM in Mtr 19.00 151.04 2,869.76
surface with shaddle and screw etc as required
as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
1009 140 exceeding 400 SQ. MM From 120 SQ. MM in Mtr 10.00 154.58 1,545.80
surface with shaddle and screw etc as required
as per direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs
for following mentioned size cable.as per
direction of Engg.-in-Charge.
Providing,fixing and laying of following dia
G.I. pipe (medium class) in ground complete
1015 146 with G.I fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-in-
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground complete
with fitting incl. trenching(75 mm depth)and
refilling as per direction of Engg.-in-Charge.
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
CONNECTED LOAD) BUILDING LIGHT)as per
direction of Engg.-in-Charge. Warrentee
period of replacement of panel & accessories
must be 5 years & compelete test certificate
must be submitted along with panel board
including component list.
In commer- 01 no 63A 4P MCB 10kA,C
series with on/off trip indication Light load for
each floor. ( Make-LEGRAND-Ekinox3 DB/
1020 151 Siemens-Betaguard/ Schneider- Acti 9/L&T 0 0.00 0.00 0.00
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model)or equievalant
make with proper model ISI marked)
Busbar- 04 numbers of 63Amps,50kA
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by
suitable size DMC insulator.
Out going- 06 nos 32A 2P MCB 10kA,C series
UPS Light load for each area UBDB. ( Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
1022 153 Schneider- Acti 9/L&T (Equievalant 0 0.00 0.00 0.00
model)/Panasonic(Equivalant model)
/ABB(Equivalant model)or equievalant make
with proper model ISI marked)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-60Amps Ammeter with
1024 155 CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or 0 0.00 0.00 0.00
equievalant make & model)
(iii) 01 set of 0-500 voltmeter
1025 156 .(DIGITAL)(Sicure/L&T or equievalant make & 0 0.00 0.00 0.00
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
CONNECTED LOAD) BUILDING POWER/AC)as
per direction of Engg.-in-Charge. Warrentee
period of replacement of panel & accessories
must be 5 years & compelete test certificate
must be submitted along with panel board
including component list.
In commer- 01 no 125A 4P MCCB 25kA, with
ROM & S. Link. (make-
1028 159 ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI 0 0.00 0.00 0.00
marked)(Icu=100%Ics)with shunt trip.with
axulary for BMS or equievalant make.
Busbar- 04 numbers of 125Amps,50kA
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by
suitable size DMC insulator.
Out going- 04 nos 63A 4P MCB 10kA,C series
for power BDB. ( Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model)or equievalant
make with proper model ISI marked)
Out going- 02 nos 32A 4P MCB 10kA,C series
forExtra power BDB. ( Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
model)/Panasonic(Equivalant model)
/ABB(Equivalant model)or equievalant make
with proper model ISI marked)
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of MFM with
1033 164 CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or 0 0.00 0.00 0.00
equievalant make & model)
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
CONNECTED LOAD) BUILDING EMERGENCY
LIGHT)as per direction of Engg.-in-Charge.
Warrentee period of replacement of panel &
accessories must be 5 years & compelete test
certificate must be submitted along with panel
board including component list.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
In commer- 01 numbers of 63 Amps 4P
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=50% Isc) with shunt trip &
axulary for BMS & mechnical inter locking for
one incommer source to other.
Busbar- 04 numbers of 100Amps Electrolytic
copper busbar duly sleeved by color coded
PVC sleeve & supported by suitable size DMC
Out going- 04 nos 32A 2P MCB UPS Light
load for each floor.
Out going- 03 nos 32A 4P MCB OT/ICU
POWER/OT MACHINE OR Bed head panel
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-100Amps Ammeter Digital
type & CTS.(DIGITAL)
(iii) 01 set of 0-500 voltmeter Digital
NB- This panel should have proper earth by
suitable rated copper flat.
Supply ,installation ,testing & commissioning
of 10KVA UPS SYSTEM WITH suitable size
battery bank, rated of battery , IGBT based
inverter system with inbuilt isolation
transformer & automatic phase sicuency
corrector of 3ph in put to 3 ph
output,415V,protection for fault by
OL,UV,EF,GF,OC,Ph. Sicuency release of
equievalant model of Numeric/ RELLIO/
Emersion or equievalant reputed make A
catogory, ISI marked as approved ) including
supply of rack inverter stand with sufficient
backup upto 30 minutes with all required
accessories to complete the job including all
connection.LOAD OF OT,ICU,BLOOD BANK) as
per direction of Engg.-in-Charge. Warrentee
period of all accessories & component &
system must be 2 years & compelete test
certificate must be submitted along with ups
including component list & SLD.
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of Legrand -
Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved
.The Load bearing capacity of the Cable Trays
should be minimum of 104.8Kg/meter at the
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 300mm(W), of Legrand -
Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved
.The Load bearing capacity of the Cable Trays
should be minimum of 104.8Kg/meter at the
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 400mm(W), of Legrand -
Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved
.The Load bearing capacity of the Cable Trays
should be minimum of 104.8Kg/meter at the
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
GALVANIZED(GC) AS PER EN-ISO-1461 ,
FLOOR RACE WAY WITH JUNCTION with
internal dimensions of size 38mm(H) x
225mm(W), of reputed make ISI marked
as approved .(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge.(3 COMPARTMENT TOTAL 54
MM HEIGHT,COST WITHOUT GST,WITH LESS
DISCOUNT(REPUTED FACTORY MADE ISI
Supplying, Erection, Fixing, connection &
testing of LED BOUNDRY WALL Light of
elegant look Panasonic/philips/wiproor
equievalant reputed make & model A
catogory, ISI marked as approved 35 W LED
street light having die cast aluminium housing
with toughened glass having lumen efficacy
of 110 lm/w or more (As per LM 79 report of
1050 181 third party NABL lab) ,IP 65 protection or Sets 4.00 3779.54 15,118.16
more , LED street light model will be vide
Panasonic / Philips/LT/WIPRO make or
equievalant reputed make A catagory ISI
marked as approved having warrantied for a
period of 5 years . The luminaire should be
supplied along with bracket maintenance free
for inspection as required as per direction of
Engg.-in-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, Erection, Fixing, connection &
testing of Panasonic 40 LED GATE Light of
Panasonic / Philips/LT/WIPRO or equievalant
reputed make A catagory ISI marked as
1051 182 approved maintenance free having 2 years Sets 2.00 11952.22 23,904.44
warranty G.I P ipe with braket including MCB
box & including with foundation as per the
Drawing for inspection as required & as per
direction of Engg.-in-Charge.
Supply of materials and installation of pipe
earth electrode made out of 50mm dia class B
G.I. pipe of 3.0 metre long with arrangements
for fitting/ termination of G.I. flat / wire with
G. I. nut bolts & washers including cost of
burnt wood charcoal, salt, foreign soil, water
1052 183 pouring arrangements, brick masonary Nos 2.00 2954.72 5,909.44
enclosure on top with removable RCC cover
complete with labour for excavation of pit in
all kinds of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on
1053 184 surface or in recess for loop earthing as Mtr 66.00 113.28 7,476.48
required as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
S/I/T&Commissioning of LT OUT DOOR FLOOR
mounted cubical type MCB ENCLOSURE made
out by 2mm CRCA steel sheet duly derusted &
pented by simens gray powder cote paint is
designed as G.A drawing. (FOR USE) with 20A
TPN MCB 01 NOLegrand/Schneider/L&T/ABB
or equievalant make & model as per direction
of Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free after sales service within warranty period
2 years of acceptance of materials
Supplying,laying of 3cx2.5 sq.mm copper
flexible cable with insulated cover of reputed
make,ISI marked with all other concerned
materials as per direction of Engg.-in-Charge.
1056 187 Ncessary test report & Warrnaty certificate to mtrs 121.00 125.08 15,134.68
be submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
1057 188 LIGHTENING CONDUCTOR 0 0.00 0.00 0.00
AIR TERMINAL & ACCESSORRIES LIGHTNING
ARRESTER+ MAST:
Providing and fixing of lightning conductor
finial made of 25 mm dia 300 mm long, G.I
1058 189 tube,having single prong at top, with 85 mm NOS 8.00 454.30 3,634.40
dia 3 mm thick G.I base plate including holes
etc complete as required with as per direction
of Engg.-in-Charge.(RATE REFERING OSR
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Reveting, sweating and soldering of copper /
G.I. tape ( with another copper / G.I. tape,
base of the finial or any other metallic object)
as required .as per direction of Engg.-in-
Charge. (RATE REFERING OSR 2018 SOR NO-
Providing and fixing of G.I. tape 20 mm x 3
mm thick on parapet or surface of wall for
lightning conductor complete as required. (For
horizontal run) as per direction of Engg.-in-
Charge.(RATE REFERING OSR 2018 SOR NO-
Providing and fixing of G.I. tape 20 mm x 3
mm thick on parapet or surface of wall for
lightning conductor complete as required. (For
virtical run) as per direction of Engg.-in-
Charge. (RATE REFERING OSR 2018 SOR NO-
Providing and fixing of testing joint, made of
20 mm x 3 mm thick G.I. strip, 125 long with
4 nos of G.I. bolts, check nuts and spring
washer etc complete as required as per
direction of Engg.-in-Charge. (RATE REFERING
OSR 2018 SOR NO-4.12)
Providing and laying of G.I. tape 32 mm x 6
mm from earth electrode directly in ground as
required as per direction of Engg.-in-Charge.
.(RATE REFERING OSR 2018 SOR NO-4.14)
Maintenance free Safe Earthing Electrodes
with ISI G.I. pipe dia 75mm as Secondary
electrode with wall thickness of 2.6 mm and
the Primary Earthing Electrode will be 50mm X
6mm X 1no M.S. hot dipped galvanized strip
filled with a highly conductive & non-corrosive
compound in between the Primary Earthing
and the secondary Earthing, the Surface Area
in will be 7,06,500sqmm for 3mtrs length and
Cross Sectional Primary conducting area is
300 sq.mm. An Solid G.I. Base plat seals the
unit at the bottom. as per direction of Engg.-
in-Charge. (MES-GFC ground Filling compound
will be provided in 25 kgs Bags.)(MES-GFC
ground Filling compound will be provided in 25
kgs Bags.)(2 bags required for each earthing
electrode.)(FOR lightening protection &
Building Electrification).The entire earthing
system should be Replacement Warranty will
be 5 years.Make-OBO/Star-x/ABB or
equievalant reputed make & model A
1065 196 EPABX, LAN, CCTV & INVERTER SYSTEM 0 0.00 0.00 0.00
Supply,installation, testing and commissioning
1066 197 of 4 P&T & 14 Extensions Hybrid EPABX Set 1.00 15930.00 15,930.00
Supply,installation, testing and commissioning
1067 198 of RJ11 Modular Complete in concealed Set 12.00 531.00 6,372.00
manner including termination of cable
Supply & Laying of 2 Core 0.5mm telephone
1068 199 cable using Rigid PVC Pipe in concealed Rmt 322.00 76.70 24,697.40
manner per running metre of cable laid.
Supply,installation, testing and commissioning
1069 200 of Electronic Push Button Telephone with Nos 12.00 826.00 9,912.00
Supply,installation, testing and commissioning
of GSM FCT Terminal
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply,installation, testing and commissioning
of Lightening Protector for P&T Lines
Supply,installation, testing and commissioning
of 12v 7 Ah Battery including termination
Supply,installation, testing and commissioning
1073 204 of RJ45 Modular Complete in concealed Set 10.00 1602.44 16,024.40
manner including termination of cable
Supply & Laying of Cat 6 cable using Rigid PVC
1074 205 Pipe in concealed manner per running metre of Rmt 255.00 67.26 17,151.30
Supply,installation, testing and commissioning
of Patch Panel, 6U Rack, Cable Manager,
Cooling Fan x 2 Nos., Earthing Kit, Power
Supply,installation, testing and
commissionining of 1 Mtr Patch Cord
Supply,installation, testing and
commissionining of 3 Mtr Patch Cord
Supply,installation, testing and
1078 209 commissionining of 4 TB CCTV Surveillance Nos 1.00 15104.00 15,104.00
Supply,installation, testing and
commissionining of 10 Amps Power Supply
Supply,installation, testing and commissioning
of Smart 32" LED Monitor
Supply,installation, testing and commissioning
of 10 Mtrs HDMI Cable
Supply,installation, testing and commissioning
Supply,installation, testing and commissioning
of Wireless Mouse
1084 215 ASSESS CONTROL SYSTEM 0 0.00 0.00 0.00
[S-B251CB] Biometric Controller - Secureye -
SL - Cat6 - AKG Pipe
Supply & laying of Cat 6 Cable in AKG PVC
Double lock casing caping including all
per running metre of cable used..( As Required
Pipe Laying - Concealed
Wall chasing and installation of PVC pipe in a
concealed manner per running metre of pipe
System Installation, testing and
[S-B100CB] Biometric Controller - Secureye -
Finger print + RFID Reader
EM Lock - Secureye - 600 Lbs Single Door
Exit Switch - Secureye - Exit Switch
EM Lock Bracket - Vantage - Z Bracket
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
[AD-125AOD (PS012)] DC Power Supply - ERD
SL - Cat6 - AKG Pipe
Supply & laying of Cat 6 Cable in AKG PVC
Double lock casing caping including all
per running metre of cable used.( As Required
SL - 2C 1.0 PC - AKG Pipe
Supply & laying of 2 core 1 sq mm power
PVC Pipe/Double lock casing caping including
accessories, per running metre of cable
Pipe Laying - Concealed
Wall chasing and installation of PVC pipe in a
concealed manner per running metre of pipe
System Installation, testing and
1098 229 Nurse Calling System 0 0.00 0.00 0.00
Supply, Installation, Testing & commissoning
Charges of VDE 0834 APPROVED PATIENT
HANDSET WITHOUT VOICE shall consist of :
- 1 x RJ 45 Jack for connecting in to
connection module with autodisconnecting
technology intellifix
- Membrane Key pand with Nurse Call Button
- Soft touch buttons for Optinally controll of
room and bed lights
- Integrated Finder and reassurance light
- Antimicrobial Coating
- Cradle for mouting the handset
Supply, Installation, Testing & commissoning
Charges of SITC OF VDE 0834 complied
BEDSIDE CONNECTION MODULE WITHOUT
VOICE for connecting the patient handset shall
consist of :-Mounting rail with board, 2 x RJ45
sockets for connecting the data bus
-Membrane keypad with Call button and
Cancel / Presence Button and integrated
1100 231 reassurance LED light No's 4.00 11174.60 44,698.40
- 1x RJ 45 socket with for connecting without
voice Patient handset
- 1 x 5 Pole DIN connector to be used as a
diagnostic port
- 4 x RJ 12 connection to be used for
connecting Buttons and Lamp module
- Antimicrobial Keypand
- It should include Countersunk fitting Box
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation, Testing & commissoning
Charges of Pull Button with integrated finder
lights or reassurance light, micro switch with a
2 metre pull cord and aluminous grip with a
nurse symbol printed on it, Countersunk
switchbox etc., complete. Pull cord
characteristics with max. force at break 120N
(ca.12 kg) for hygiene reasons it must also be
possible to change the pull cord very easily
using a snap hook for Basic Device, 4 screw-
type terminals for connecting the power
supply circuit etc., complete.
Supply, Installation, Testing & commissoning
Charges of SITC OF VDE 0834 approced STAFF
TERMINAL consist of :
- Bright 6.5 inch TFT display with wide viewing
angle, resolution of 800 x 480 pixel and LED
backlight for displaying all details
- Interactive operation via touch sensor field
- 2 unit foot postions for different angles of
1102 233 inclination or wall mounting, No's 1.00 65018.00 65,018.00
- Answering receiver for speaking discretely,
- Microphone and loudspeaker for hands-free
speech (incl. volume control),
- Automatic changeover between hands-free
and discrete speaking,
- 100BaseTX interface to the system switch,
- 2.8 m connection cable with an RJ45
connection plug, which is protected
from disconnection
Supply, Installation, Testing & commissoning
Charges of LAMP module For optical indication
of calls, presences and reminders in the
relevant colours conforming to VDE0834
- 4 light chambers with light reflectors for
homogeneous illumination,
- 1 light chamber fitted with 3 ultra bright red
- 1 light chamber fitted with 3 ultra bright
- 1 light chamber fitted with 3 ultra bright
- 1 light chamber fitted with 3 ultra bright blue
- Every light chamber conforms to the light
strength set out by VDE0834,
- the LED life expectancy is approximately
100,000 operating hours,
Supply, Installation, Testing & commissoning
Charges of EVENT DATABASE LICENSE which
1104 235 will enable of lgging of all the events (e.g. No's 1.00 172327.20 1,72,327.20
Calls, Presences Etc. ) on the management
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation, Testing & commissoning
Charges of VDE 0834 APPROVED SYSTEM
SWITCH (FIELD SWITCH) to form a
decentralized node for data exhange hub
- 1 x RJ45 socket, 100Mb IP Port (IEEE802.3
100BaseTX), galvanically isolated conformant
with EN 60950 and VDE 0834
- 8 x RJ45 POE sockets, each with a 100Mb IP
system port (IEEE802.3 100BaseTX) for
connection of all IP capable system modules,
1105 236 - 2 x 2 x RJ45 sockets for connecting the I/O No's 1.00 61607.80 61,607.80
data buses capable of connection up to 125
Buttons, Patient Handset Etc with inbuilt
Power supply to Buttons
- Supervised 24VDC output for extrnal devices
e.g. Lamp module
- Also have the Netorking feature Layer 2 NSP
Ethernate type 0x3000, IEEE 802.1p Priority,
IEEE 802.1Q VLANs, RFC 768 UDP, RFC 783
TFTP Protocol (revision 2), RFC 793 TCP, RFC
826 ARP, RFC 854 TELNET, RFC 951 BOOTP,
RFC 2236 IGMPv2
Supply, Installation, Testing & commissoning
1106 237 Charges of Display Output Module, Display No's 1.00 18644.00 18,644.00
device not Included
Supply, Installation, Testing & commissoning
Charges of Room Terminal without Display
Supply, Installation, Testing & commissoning
Charges of Room terminal with speech
function for fitting in patient rooms and other
important rooms as a communication center
Supply , Laying, testing & commissioning of
CAT6e cable in rigid PVC
Pipe/Concealed/Casing Caping per running
metre of cable used
Supply, Installation, Testing & commissoning
Charges of Manangement Centre used during
the commissioning of the system for reading in
the system topology, for uploading the fi
rmware and the system confi guration, for
operating interfaces to foreign systems, for
logging of all system events and as a central
location for system confi guration and remote
maintenance. The minimum requirements for
the management center are as follows: - Intel
Xeon E3 2,3 GHz or similar, 4 GB RAM,1 x 500
GB HDD, 1 x DVD harddrive, 2 x Gbit LAN
Ethernet RJ45, 4 x USB V2.0, 1 x PCI or 1 x
PICe socket, Preloaded SUSE Linux enterprise
server from V.11-SP1 and Nurse Call
Necessary Softwares and licesnces
Supply , Installation, testing , commissioning
of TV socket wih base & cover complete.
Supply , Laying, testing & commissioning of
1112 243 RG6 Solid Copper cable in PVC Pipe/Casing Mtr's 200.00 103.84 20,768.00
caping per mtr. of cable used.
1113 244 Sub-Total of Electrical Works 0 0.00 0.00 56,88,307.74
1115 2 Supply of A,C with indoor and outdoor unit 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
1.5 TR high wall split A.C 3Star
(Make:Toshiba/Hitachi/Carrier/Diakin or eq.
1117 4 REFRIGRANT PIPING 0 0.00 0.00 0.00
Supply,installation of hard/soft copper
refregrant piping,complete with fitting of
bends and other nesessary material to
complete the job.
1119 6 1 TR to 3 TR high wall split A.C mtr 32.00 988.84 31,642.88
Supply,installation & fabrication of MS
base frame for both indoor and outdoor
unit and other nesessary material to
complete the job.
1122 9 1 TR to 3 TR high wall split A.C no 12.00 1984.76 23,817.12
Supply,installation & fabrication of Insulated
drain water piping from indoor to nearestdrain
point separate to all and other nesessary
material to complete the job.
1126 13 SHEET METAL WORKS 0 0.00 0.00 0.00
Supply,laying of control cable and other
nesessary material to complete the job.
1129 16 For 1 TR to3 TR high wall split A.C no 20.00 145.14 2,902.80
1130 17 Sub-Total of HVAC Works 0 0.00 0.00 2,85,847.92
1131 1 Firefighting Works 0 0.00 0.00 0.00
Portable Fire Extinguisher System Supplying,
installation, testing and commissioning of CO2
type Fire Extinguisher 4.5 kg capacity
confirming to IS: 2878 made from ISI marked
seamless cylinder confirming to IS: 7285,
fitted with ISI marked controlled valve
confirming to IS: 3224, high pressure 1mtr
discharge hose & horn complete with initial
gas charged with carrying handle & wall
mounting bracket as per direction of Engineer-
in-charge. (Make:CS-FIRE/SUNMAX/CANEXE
or equievalant )
Supplying, installation, testing and
commissioning of Mechanical Foam type 9 litre
capacity Fire Extinguisher, ISI marked, IS:
10204, containing 540 ml AFFF liquid ISI
marked, IS: 4989 Part II and a polyurethane
coated CO2 Gas Cartridge, ISI marked, IS:
4947 complete with gunmetal union cap, nylon
hose with plastic foam making branch and wall
mounting bracket as per direction of Engineer-
1134 4 Sub-Total of Firefighting Works 0 0.00 0.00 1,09,879.24
Supplying fitting and fixing of LED Letter
Board incluiding cost of all accessories,
materials, labours & T&P etc.complete
LED Letter COMMUNITY HOSPITAL CENTRE,
CHANDRAGIRI (Odia & English)
LED Letter ATTENDANT REST SHED,
CHANDRAGIRI (Odia & English)
Supplying fitting and fixing of Steel Site Map
and Sinage at CHC CHANDRAGIRI incluiding
cost of all accessories, materials, labours &
T&P etc.complete excluding GST.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying fitting and fixing of Name plate at
CHC CHANDRAGIRI incluiding cost of all
accessories, materials, labours & T&P
etc.complete excluding GST.
Surface dressing of the ground including
removing Vegetation and making up
undulations and in-equalities not exceeding 15
cms in depth/ height including disposal of
rubbish lead upto 50m (at least 5m away from
the dressed area).
Supplying and stacking of good earth at
site including royalty and carriage upto 5
1143 9 km lead complete (earth measured in Cum 100.00 533.45 53,345.44
stacks will be reduced by 20% for
payment), 200mm thick.
Supplying and stacking sludge at site including
royalty and carriage upto 5 km lead complete
(sludge measured in stacks will be reduced by
8% for payment).
Uprooting weeds from the trenched area after
10 to 15 days of its flooding with water
including disposal of uprooted vegetation,
breaking clods and fine dressing the ground
including all materials and labour complete as
per direction of Engineer-In-Charge.
Providing and laying Neelgiri/Mexican grass
turf with earth 50mm to 60mm thickness of
existing ground prepared with proper level and
ramming with tools wooden (Dhurmos) and
1146 12 than rolling the surface with light roller make Sqm 675.00 221.83 1,49,734.04
the surface smoothen and light waterning with
sprinkler and maintenance
for 30 days or more till the grass establish
properly, as per direction of officer-in-charge.
Providing & laying Selection no. 1 grass turf
with earth 50mm to 60mm thickness of
existing ground prepared with proper level and
ramming with required tools wooden and than
1147 13 rolling the surface with light roller make the Sqm 225.00 90.53 20,369.16
surface smoothen and light watering the same
maintenance for 30 days or more till the grass
establish properly,as per direction of officer in
Provision of plantation all around the campus
with suitable Plants and Shurbs where
required including all material and labour
1150 16 Aglaonema crispum(6'' DIA) Nos 10.00 59.00 590.00
1151 17 Alpinia sanderae(10'' dia) Nos 10.00 106.20 1,062.00
1152 18 Anthurium andreanum(10'' dia) Nos 10.00 106.20 1,062.00
1153 19 Asparagus densiflorus(6'' dia) Nos 10.00 47.20 472.00
1154 20 Caladium bicolor(6'' dia) Nos 10.00 59.00 590.00
1155 21 Calathea bella Nos 10.00 59.00 590.00
1156 22 Chlorophytum comosum(6'' dia) Nos 10.00 47.20 472.00
1157 23 Costus melartifolius(10'' dia) Nos 10.00 106.20 1,062.00
1158 24 Curculigo capitulata (6'' dia) Nos 10.00 59.00 590.00
1159 25 Dracaena deremensis(10'' dia) Nos 10.00 106.20 1,062.00
1160 26 Furcaria foetida(10'' dia) Nos 10.00 106.20 1,062.00
1161 27 Heliconia rostrata(10'' DIA) Nos 10.00 106.20 1,062.00
1162 28 Hemigraphis colorata(6'' DIA) Nos 10.00 59.00 590.00
1163 29 Kaempferia roscoeana Nos 10.00 59.00 590.00
1164 30 Leea coccinea(6'' DIA) Nos 10.00 59.00 590.00
1165 31 Livistonia rotundifolia(10'' DIA) Nos 10.00 118.00 1,180.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Provision of plantation all around the campus
1166 32 with suitable tress where required including 0 0.00 0.00 0.00
all material and labour charge.
1167 33 Araucaria bidwillii Nos 10.00 177.00 1,770.00
1168 34 Cinnamomum camphora Nos 10.00 118.00 1,180.00
1169 35 Cryptomeria japonica Nos 10.00 177.00 1,770.00
1170 36 Cupressus sempervirens Nos 10.00 177.00 1,770.00
1171 37 Filicium decipiens Nos 10.00 118.00 1,180.00
1172 38 Murraya exotica Nos 10.00 118.00 1,180.00
1174 40 Thuja orientalis Nos 10.00 118.00 1,180.00
1175 41 Bougainvillea Nos 10.00 59.00 590.00
1177 43 Gardenia jasminoides Nos 10.00 118.00 1,180.00
1178 44 Hibiscus rosasinensis Nos 10.00 141.60 1,416.00
1179 45 Ixora singaporensis Nos 10.00 118.00 1,180.00
1180 46 Jasminum sambac Nos 10.00 94.40 944.00
Plantation of Trees, Shrubs, and Hedge at site
i/c watering and removal of unsaverieable
material’s as per direction of officer in charge
(excluding cost of plant & water)
1182 48 Labour for Maintainace Month 6.00 11682.00 70,092.00
Providing and laying at or near ground level
factory made kerb stone of M-25 grade
cement concrete in position to the required
line, level and curvature, jointed with cement
mortar 1:3 (1 cement: 3 coarse sand),
including making joints with or without
grooves (thickness of joints except at sharp
curve shall not to more than 5mm), including
making drainage opening wherever required
complete etc. as per direction of Engineer-in-
charge (length of finished kerb edging shall be
measured for payment). (Precast C.C. kerb
stone shall be approved by Engineer-in-
Supply & installation of inter lock kerb stone of
1184 50 solid gray 300 X 300 X 150 mm inluding cost Cum 5.00 10163.99 50,819.95
of all labour & materials etc.
1185 51 Master Plan of facilities no 1.00 118000.00 1,18,000.00
Supplying fitting and fixing of UPVC window
with mosquito net sliding type of approved
quality including all etc required to complete
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade as
per approved designs and drawings having a
minimum compressive strength (in work test)
250 Kg. / Square cm. in 15 cm. cubes at 28
days after mixing and test conducted in
accordance with I.S. 516 using 12 mm. to 20
mm. size black hard crushed broken granite
stone chips and screened and washed sharp
sand for mortar of approved quality from
approved quarry, washed and cleaned (
20mm. size chips not to exceeds 25 % ) to be
mixed in concrete mixture with Portland slag
cement (PSC) including hoisting, lowering,
laying and compaction concrete by using
vibrators, watering and curing for 28 days,
centering and shuttering then after
dismantling and removing debris from the
work site and finishing the exposed surface
smooth providing grooves or beads wherever
necessary including cost, conveyance, loading,
unloading, royalties and taxes of all materials
and cost of all labours, sundries, T & P
required of the work etc. complete in all
respect as directed by the Engineer-in-Charge.
But excluding cost and conveyance of M.S.
rods or Tor steel and binding wires and labour
charges for straightening, cutting, bending
etc. of M.S. rods or tor steel tying the grills
and placing in proper position.
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL (VIZAG)
make including bending, binding, welding and
joining if necessary and tying the grills and
placing in position as required for R.C.C. Work
and for providing fan hooks as required,
hoisting, lowering, laying including cost,
conveyances, taxes of M.S. Rod or tor steel
and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight of
B.I.S. for M.S. Rods or tor steel only. Wastage
if any, including weight of binding wire will not
be considered for measurement) etc. complete
as per specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
1195 61 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
1197 63 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
cement mortar of mix 1:4 (1 cement : 4
coarse sand) including necessary scaffolding,
curing etc. all complete at all floors and all
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
granite crusher broken chips on new work in
1203 69 “Kayakalpa” Certification 0 0.00 0.00 0.00
Energy Audit by BEE Certified Energy Auditor (
1204 70 Includes the Auditors' fee, Audit Report fees, Set 1.00 236000.00 2,36,000.00
Certification Fees and other incidentals)
Procurement of AQI for outdoor and critical
Areas ( For DHH 6 Units, CHC-3 Units,)
Procurement of Renewable Energy Materials (
1206 72 Under Eco-Friendly)- Potable Bio-Gas Plant, Set 1.00 51920.00 51,920.00
Solar Light at BMW Area)
Sensor Based Lights in Bath Rooms, Store
1207 73 Rooms, Herbal garden (Energy Efficient Each 36.00 1180.00 42,480.00
Facility-Under Eco-Friendly Hospital)
1208 74 Procurement of Watermeter Each 14.00 3776.00 52,864.00
Procurement of Areators (For water
1209 75 conservation) -At Bathrooms, Handwashing Each 13.00 1321.60 17,180.80
Stations, Kitchen areas)
Development and printing of Posters and SOPs
(Subject Specific -especially for Eco-Friendly
Hospital, which also includes designing cost)
Median cost for each Poster
Procurement of Air Purifier (4 or 5 star, UV-C,
HEPA Technology Air purifier))
Indoor/Out door sports materials procuremnts
1212 78 (Eco-Friendly Hospital), Carrom, Chess, Set 1.00 24780.00 24,780.00
Badminton, Vollyball
Surgical Scrub Station (stainless Steel)-
OT, SNCU), CHC-LR & OT)
Automatic Liquid Soap dispenser touch less-
wall mounted DHH-63 Units, CHC-15
Sinages/Important Information for visually
1215 81 challeged/impaired persons (Braille)- (DHH- Each 3.00 3304.00 9,912.00
7displays, CHC-3 displays)
Exhaust fan with Hooding at Kitchen &
1216 82 Bathroom (Eco-Friendly Hospital) DHH- 17 Each 9.00 3776.00 33,984.00
nos. CHC-09 nos
Water Heater-(Geyser) (10 liters)-DHH ( Old
Building-02, New Building-05), CHC( 04)
1218 84 Amenities for cafeteria (Chair, Table, Shelf) SEt 1 37760.00 37,760.00
Procurement of eco-friendly office stationary
under Eco-friendly category of Kayakalp
1220 86 Sub-Total of Other Works 0 0.00 0.00 39,42,713.91
Sub-Total for "AMA HOSPITAL" projects
in the facilities of CHC Chandragiri
Digitally signed by Rakesh
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC Contracting with Ammendment 4.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone - Repair Renovation.pdf
Tender Document
11 BOQ GAJ 001 AMA.pdf
Tender Document
12 Integrity Pact.PDF
Tender Document
13 List of Approved Makes.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .