RENOVATION AND CONSTRUCTION OF NOCTURNAL ANIMAL HOUSE IN AAZP, VANDALUR

Amount

Clearing Scrub Jungle

Dismantling, clearing away and carefully stocking the materials useful for reuse. Brick or stone masonry in cement mortar walls under 3m, height

Dismantling plain cement concrete

Dismantling RCC concrete

Terracing work in roof or floor

Petty iron works for cutting, removing old iron works

Dismantling RCC core cutting in slab for ventilator

HGS - SS 20B Earth work excavating and depositing on bank with initial lead of 10 mt. and initial lift of 2 mts in Hard stiff clay, stiff block cotton hard red earth and earth mixed with small size boulders and hard gravelly soil SS 20 B (Unique Code W - 0061)

Cement concrete 1:3:6 using 40mm size metal (Sl.No. 120)

Cement concrete 1:1.5:3(one cement, two sand and four hard broken stone) using 20 mm gauge hard broken granite stone jelly for all RCC works such as lintels, beams, floor or roof slab, canopy slab, sill slabs, sunshades, staircase faces and other similar it.

Brick work in cement mortar 1:5 (One cement and five sand using second class table molded chamber burnt bricks of size Masonry projection wherever necessary for obtaining required elevation should be done without cost) for foundation and basement page 33 for 100 CFT

Brick work in cement mortar 1:5 (One cement and five sand using second class table molded chamber burnt bricks of size Masonry projection wherever necessary for obtaining required elevation should be done without cost) for super structure in ground floor

Refilling with excavated earth complying with standard specification for filling in foundation and basement

Refilling with M sand for kraal

Providing form work for centering, strutting etc., for all RCC works such as slabs, lintels, stair case wait slab landing slab etc., complete complying with standard specifications 10 m

Supplying fabricating and placing in position mild steel plain or RTS bars as detailed below for all RCC works inclusive of cost of steel and binding wire (steel) bar alone shall be supplied departmentally at site of work and cost thereof recovered at issued rate (SI. No. 134)

Weathering course concrete broken brick jelly using 20 mm in pure slaked lime over RCC works / roof slab the proportion of bricks to lime 32:12.5 well beaten with wooden beating of required thickness 80 mm to roof slab

Finishing the top of roof with on course of machine pressed tiles ( 23 cm x 23 cm x 20mm ) in cement mortar 1:3 (one cement and three sand) 12mm thick with crude oil 10 % by weight of cement used and pointed neatly with the same oiled mortar.

Plastering with cement mortar 1:5 (one cement and five sand) 12mm thick – 10 m2

Supply of 75mm X 75mm X 6mm, 50mmx50mmx6mm L angle and 40mmx40mmx6mm L angle for Kraal frame works

Supply and fabrication of 304 grade ISI specifcation stainless steel gates

White washing two coats using best shell lime 100 m2

Distempering with best quality of Acrylic distemper two coats over one coat of primer over new plastered surface

Painting one coat for old iron works

Painting two coat with ready mixed paint for new iron work

Dadooing the walls with of approved quality and colour plain ceramic tiles size 300mmx450mmx8mm thick laid in cement mortar 1:2, 10mm thick and pointing with white cement using 0.4Kg/M2 including finishing the point and pointing flush in the file surface complete 10m2(Page 108)

Flooring with vertified floor tiles of size 60cmx60cmx8 to 10mm laid in C.M. 1:3, 20mm thick, painting with same coloured cement for 10M2

Supply and erection Industrial ventilator above roof building

Supply and fixing viewing glass 10mm thick glass with 1.59 mm PVV inner layer for viewing area

Supply and fixing ferrul women wire mesh for exising kraal

Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.

Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required

Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required

Supply and erection of suitable MS/GI Box covered with 5 mm thick Bakelite sheet as below 23.8.3.5 200 mm X 150 mm X 60 mm deep metal box

Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete RIPLE POLE MCCB 16 to 100 Amp, 25 KA

Supply and fixing ceiling fan 48" - CROMPTON GREAVES, HAVELLES ETC.

Supplying, errection, testing of Exhaust fan (as per IS code 374) having a each capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

25 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

Providing and fixing brass bib cock of approved quality - 15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed - 110mm dia meter

PRECAST DRAIN FOR DUCT PIPE - For precast slabs 5 cm thick quantity of cement = 0.03375 M3 (1.50x0.45x0.05)

9 inch dia spiral pipe ducting for air flowicluding grill, Jali, arflow control valve etc.

Supply and fixing SS standoff barrier - 2 inch dia. 1.6 mm thickness SS 304 pipe Railing

18 mm thick marble stone Sill and sides to be provided and installed below glass fixing

Fire ABC Powder Type 4 Kg Fire Extinguisher