Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹91.9 LAccepted-AOC NO 29 CHOLAN STREET WEST VENGATESWARA NAGAR SARAM PUDUCHERRY 605 013 | PONDICHERRY | PUDUCHERRY | 605013 | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical NO 208 3C THIRUVAMATHUR CROSS ROAD GINGEE SALAI VILLUPURAM TAMIL NADU 605 601 | VILLUPURAM | TAMIL NADU | 605601 | - | Rejected-Technical L2 |
Tender Value
₹98.7 L
EMD Value
₹2.0 L
Closing Date
19 Dec 2022, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Commissioner, OM
II cross, Jawahar Nagar Puducherry-5
Revitalization of Aayikulam at Muthirapalayam, Puduhcerry (Phase-I).
2022_DLA_11528_1
OM/e-tenders/667/2022-23
Open Tender
Civil Works
Works
180 days
INDIRA NAGAR
Please refer Tender documents
3 documents required · 3 mandatory
₹1,050
₹2.0 L
6 Mar 2023
9 Dec 2022
19 Dec 2022
9 Dec 2022
19 Dec 2022
9 Dec 2022
Amount
Code No. 2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil
Code No. 2.10.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m - all kinds of soil - pipes, cables etc , exceeding 80mm dia but not exceeding 300 mm dia
Code No. 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Code No. 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)
Code No. 4.2.5 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns,piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping,bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. upto floor five level excluding the cost of centering , shuttering and finishing - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
Code No. 4.3.1 Centring and shuttering including strutting, propping etc. and removal of form work for - foundations, footings, bases for columns
Code No. 4.3.2 Centring and shuttering including strutting, propping etc. and removal of form work for - retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
Code No. 5.12 Providing, hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bedplates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth with 6mm thick cement plaster 1:3 (1cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Code No. 5.22.7 Steel reinforcement for R.C.C.work including straightening , cutting , bending, placing in position and binding all complete upto plinth level – Thermo - Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more
Addendum Code No. 6.1.1 Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand )
Code No. 8.12 Providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as - flamed finish granite stone slab Jet black , Cherry red, Elite brown, Cat eye or equivalent
Code No. 9.1.2V Providing wood work in frames of doors, windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Vengai wood
Code No. 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) decorative type , core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Code No. 9.117.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance +_ 1mm ), with wall thickness 2.0 mm (+-0.2mm) , corners of the door frame to be jointed with galvanized brackets and stainless steel screws , joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19 x 19 mm and 1mm (+-0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification - Extruded section profile size 42 x 50 mm
Code No. 9.118.1 Providing and fixing to existing door frames - 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59 x 24 mm and wall thickness 2 mm (+- 0.2 mm) with inbuilt edging on both sides . The styles and rails mitred and joint at the corners by means of M.S. galvanised / plastic brackets of size 5 x 220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S.tube of size 20x20 mm and 1mm (+- 0.1mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollowsection of size 100 x 24 mm and 2 mm (+-0.2 mm) wall thickness, fixed to the shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm (+_ 0.1mm) wall thickness . They panels filled vertcally and tie bar at two places by inserting horizontally 6 mm galvanised M.S.rod and fastened with nuts and washers , complete as per manufacturer's specification (For W.C. and bathroom door shutter)
Code No. 10.25.2 Steel work welded in built up sections / framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Code No. 10.28 Providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding. Buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complte. i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.,)
Code No. 11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete - 40mm thick with 20mm nominal size stone aggregate
Code No. 11.36D Providing and fixing commercial quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) , of approved make (Jhonson / Asian / Somany / Nitco) in all colours , shades of size 200 x 300 mm as approved in skirting , risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching shade complete - size 200x300 mm
Code No. 11.37.2 Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of commercial quality conforming to IS : 15622, of approved make (Bell / Johnson / Regency / Somany / Naveen / Asian) in colours such as white, Ivory, Grey, Fume red brown ,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc., complete
Code No. 11.40.4 Providing and laying rectified ceramic rustic / matt finish floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of commercial quality conforming to IS:15622 of approved make (Somany / Nitco) in all colours shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete
Code No. 12.48 Providing & fixing on roof pressed clay tile (Mangalore tile) of 20mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)
Code No. 13.1.1 12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)
Code No. 13.2.1 15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine sand)
Code No. 13.46.1 Finishing walls with acrylic smooth exterior paint of required shade - New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm
Code No. 13.50.1 Applying priming coat - with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Code No. 13.50.4 Applying priming coat - with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
Code No. 13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work
Code No. 14.83 Hacking of CC flooring including cleaning for surface etc.complete
Code No. 15.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge - Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Code No. 15.2.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead -Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)
Code No. 15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar
Code No. 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead - for thickness of tiles 10mm to 25mm
Code No. 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead
Code No. 16.70.2 Providing and fixing G.I.chain link fabric fencing of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts , bolts and washers as required complete - Made of G.I.wire of dia 4mm , PVC coated to achieve outer dia not less than 5mm in required colour and shade
Code No. 17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) -Orissa pattern W.C.pan of size 580x440mm
Code No. 17.14.1 Extra for using coloured W.C.pan instead of white W.C.pan - Orissa pattern W.C.pan 580x440mm
Code No. 18.9.11 Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 20mm nominal outer dia pipes
Code No. 18.9.12 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 25mm nominal outer dia pipes
Code No. 18.18.2 Providing and fixing ball valve (brass) of approved quality , high or low pressure, with plastic floats complete - 20mm nominal bore
Code No. 18.48A Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank - Circular Tank
Code No. 18.54.4 Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 90 mm long , weighing not less than 93 gms
Code No. 19.21.1 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete - For pipes 100 to 250 mm diameter
Code No. 19.33.1 Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B) conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 leaving 10mm gap for thermal expansion - single socked pipes -110mm diametre
Code No. 30.2 Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering rolling each layer with 1/2 tonne roller or wooden or steel rammers and dressing up in embankement for roads flood banks, marginal banks and guide banks or filling up ground depression, lead upto 50m and lift upto 1.5m in all kinds of soil. The Payment shall be based on levels
Code No. 31.259.1A Supplying of 3.5/ 4x25 sqmm underground cable (Paragon / suncab / Empire) complete -upto 25HP pumpset.
Code No. 11.4 Maintenance of lawns or Turfing of slopes (rough grassing) for a period of one year including watering, etc.
Code No. 11.30 Providing and laying soft Korean grass turfing including supplying red earth, manure, river sand, labour charges for ground preparation spreading earth and manure transportation of all and maintaining the lawn for initial three months etc. complete.
Basic item Code No. 1617J Providing and laying UPVC Pipe -200mm dia. (0.6 MPa) - (Finolex/Jain/Supreme/True bore / Nandi)
Ele.PSR 2018-19 Code No. 1.17.2 Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as equired - 2 X 1.5
Ele.PSR 2018-19 Code No. 1.17.11 Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as equired -2 x 2.5 sq.mm
Ele.PSR 2018-19 Code No. 1.17.20 Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as equired -2 x 4 sq.mm
Ele.PSR 2018-19 Code No. 1.23.1 Supplying and fixing following piano type switch / socket on per the existing switch box / cover including connections etc.as required - 5/6 A switch
Ele.PSR 2018-19 Code No. 5.1 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia per including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal / coke and salt) as required
Ele.PSR 2018-19 Code No. 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess , including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch , connections etc , as required
Ele.PSR 2018-19 Sl.No. 679 - Code 2904 Providing and fixing of 8 SWG copper wire (4.0 mm dia)
Ele PSR 2018-19 Sl.No. 1096 - Code 3127-O Providing and fixing 1200mm sweep double ball bearing ceiling fan - make Almonard and Usha
Ele PSR 2018-19 Sl.No. 1211 Providing and fixing 60W LED street light fitting (Orbit)
Non PSR SE Approved rate Providing and fixing 20W LED tube light make:philips / Bajaj/ Havells
Non PSR SE Approved rate Providing and planting of ornamental and flowering shrubs including digging pit, refilling the excavated earth, leveling the area and transport charges.
Non PSR SE Approved rate Providing and planting of Specimen Plants Raphis palm - 3ft including digging pit, refilling the excavated earth levelling the area and transport charges.
Non PSR SE Approved rate Providing and planting of Specimen Plants Schefflera - 2ft including digging pit, refilling the excavated earth levelling the area and transport charges.
Non PSR SE Approved rate Providing and planting of Specimen Plants Plumaria dwarf - 3ft digging pit refilling the excavated earth levelling the area and transport charges
Non PSR SE Approved rate Providing and planting of Specimen Plants Fox tail Palm - 3 ft. including digging pit, refilling the excavated earth levelling the area and transport charges.
Non PSR SE Approved rate Providing and planting of Specimen Plants Phoenix - 2ft including digging pit, refilling the excavated earth, levelling the area and transport charges.
Non PSR SE Approved rate Providing and planting of Specimen Plants Golden bamboo - 5 ft. digging pit, refilling the excavated earth, levelling the area and transport charges.
Non PSR SE Approved rate Providing and planting of Specimen Plants Buhinia tree 5 ft including digging pit, refilling the excavated earth, levelling the area and transport charges.
Non PSR SE Approved rate Supplying and fixing of M20 reinforced cement concrete bench 1.83 meters length, bottom slab 0.40m width with 0.065 thickness, back slab 0.28m depth and 0.05m thickness, side support handle of 0.070m thickness. Overall height of backside 1.04mts. Front side 0.64mts, including foundation concrete etc. complete as per the direction of Engineer-in-charge.
Non PSR SE Approved rate Making cornice on wall edges to 10cm thick to 15cm wide using brick bats/ flat bricks in cement mortar 1:2(1 cement : 2 fine sand) as per detailed drawing and trowel finish in two layers at an average thickness of 25mm with cement mortor 1:4 (1 cement : 4 fine sand ) including moulding of arch surface all labour charges, scaffolding, cost of materials etc., complete.
MKM Constructions
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_11796.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .