Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance B 4 NEAR CENTRAL PARK RHB COLONY SOUTH EXTN BALICHA UDAIPUR RAJASTHAN | UDAIPUR | UDAIPUR | RAJASTHAN | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance 28 29 205A LINK ROAD LAJPAT NAGAR III NEW DELHI 110024 | NEW DELHI | NEW DELHI | DELHI | 110024 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 4 | Admitted-Fee/PreQual/Technical/Finance 09 206 UDAY SINGH JAIN ROAD ALIGARH UTTAR PRADESH 203201 | ALIGARH | BULANDSHAHR | UTTAR PRADESH | 203201 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹3.3 Cr
EMD Value
₹6.6 L
Closing Date
27 Jun 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer and DCE (CED, PD and EP)
2nd Floor CED, Sarathi Building NFC Hyderabad 500062
Ancillary works for various plant buildings at NFC Kota. TENDER NOTICE NO. C/1311/2023
2023_NFC_756130_1
C/1311/2023
Open Tender
Civil Works
Item Rate
120 days
Rawatbhata
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹6.6 L
28 Jun 2023
5 Jun 2023
28 Jun 2023
5 Jun 2023
27 Jun 2023
9 Jun 2023
5 Jun 2023 - 7 Jun 2023
Amount
Providing and fixing of approved quality heat resistant terrace tiles of size 300x300x20mm with SRI>78 on a pre-waterproofed and finished surface of terrace in 20mm thick cool mortar proportionately mixed with white cement and water in ratio as per approved manufacturer's specifications and grouting with white marble powder in the ratio 1:1 / any other specified waterproof tile grout and polishing complete surface upto 3 cuts with skirting of 150mm of tile provided along the parapet walls, all complete.
Providing and laying REINFORCED CEMENT CONCRETE OF GRADE M-20 with 20mm and down size graded crushed stone aggregate/ gravel in NON-SUSPENDED ground floor slab, pavement and ramps etc., laying in alternate panels to required levels and falls by SUCTION DRYING PROCESS including leaving dowels, pockets, shuttering, supply & installation of removable track rails, leave-in-place rails, vibrating by poker/ needle vibrator, surface vibrator, mechanical floating and power toweling, curing and rendering if required to give smooth and even surface (Excluding cost of reinforcement) etc. all complete as specified and directed. CEMENT SUPPLIED FREE OF COST BY THE OWNER.
Providing and laying machine cut chisel dressed kota stone slab of approved shade in floor tread, landing, riser, skirting, dado over and including a bed of cement mortar including preparing the base surface, applying neat cement slurry @ 2.75 Kg of cement per Sq.m. of area to receive the mortar, providing neat cement slurry @ 4.4kg. of cement /Sq.m. of area over the mortar bed, jointing each slab with neat cement paste/ grouting white cement and pigment ( conforming to IS : 2114, Table-1, matching the shade of slabs), machine cutting of the slab edges square, true & plumb finishing, grinding, polishing, finishing etc. all complete.
Providing & fixing Kota stone of 25mm thick, including making the chasing, filling in CM 1:4 M sand, finishing , rubbing and polishing complete in all levels/height with all lead and lifts including labour, necessary tools and plants, all material, etc,. and as per the direction of enfgineer in charge.
18mm thick kota stone slab in riser, dado, skirting over average12mm thick cement mortar1:3(1 cement:3 coarse sand by volume). CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.
Extra for providing Half round nosing by machine cutting of the slab
Providing and laying at all floors and levels 6mm (min) thick first quality glossy/ matt / antiskid/rustic / digital collection etc. ceramic tile flooring as per the approved pattern and colour as mentioned below conforming to IS 15622 latest of edition from approved list of maufacturers or equilvalent laid in cement mortar bedding / backing, close jointed and grouted with matching cement slurry to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings/cutout if necessary, wastage and final cleaning of surfaces as required, curing etc.complete all as per drawing specifications & as directed by Engineer in charge. a) In flooring with rustic/matt finished/ 300x300mm, 600 x 600mm or equivalent approved sizes of ceramic tile laid over 20mm thick cement mortar bedding 1:4 ( 1 cement : 4 sand) b) In skirting laid over 12 mm thick CM 1:3 backing. c) Anti skid ceramic tile with 300x300 or equivalent approved sizes of ceramic tile laid over 20/15mm thick cement mortar bedding 1:4. In dado / clading with tile of size 200x300mm or size as per working drawing laid over 12 mm thick CM 1:3 backing for toilets.
a) Anti skid ceramic tile with 300x300 or equivalent approved sizes of ceramic tile laid over 20/15mm thick cement mortar bedding 1:4. for toilets and utility area.
b) In dado / clading with tile of size 200x300mm or size as per working drawing laid over 12 mm thick CM 1:3 backing.
Providing and laying double charged vitrified/full body floor tiles, in 600x600mm size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make like Kajaria/Regency/Somani/Jhonson & Jhonson , or approved equivalent laid over 20mm thick cement mortar bedding 1:4 ( 1 cement : 4 sand) .in all colours and shades, laid cement mortar , jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete for corridors, etc. Note: i) Quoted rate shall include extra cement mortar required to match the water proofing plaster if any to maintain the lines and plumb of dado. ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge iii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly.
Providing and fixing 18 mm thick Granite flooring/dado using slabs of gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse Msand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish incuding making holes, molding half round/full round nosing and grooves for antislippery measure etc. complete at all levels as specified and directed.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws including stainless steel butt hinges, all as per direction of Engineer-In- Charge.
Providing and fixing in position following items including all necessary fixtures, fittings, finishing etc. all complete.
Approved make pressure die cast zinc alloy, chromium plated door handle. 150mm long
Approved quality anodized aluminium aldrop 300mm long, 19.05mm dia in bronze colour.
Approved quality anodized aluminium tower bolts conforming to IS-204 in Bronze colour, 150 x 10mm.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. incuding M.S hold fast/lugs and SS dash fasteners complete.
Sand faced plaster 20 mm thick in 2 coats over exterior masonry and concrete surfaces at and at all heights above plinth level as given below with base coat in cement mortar 1:4 (1 cemen:4 sand) with approved integrated water proofing compound @ 2% by weight of cement, of M/s. Fosroc/Demach/ Huntsman/ Pedilite/ SIKA Qualcrete / MBT or as per manufacturer’s specifications, 12 mm thick and finishing coat in CM 1:3 (1 cement:3 sand), 8 mm thick, final rendering, making necessary grooves, bands, drip moulds as required, double steel/tubular scaffolding wherever necessary, hacking of concrete surfaces, curing, etc., complete as specified and directed.
Cement plastering 12 mm thick for internal walls in cement mortar 1:4 (1 cement :4 river sand) , and at all heights above plinth level over brick walls or concrete surfaces including making necessary grooves in between junctions of brick masonry and RCC and also other places wherever required over brick walls or concrete surface, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed. (Cement supplied by the Contractor at their cost.) including scaffolding for all heights complete as specified and directed by EIC.
Providing and applying white cement based putty in two coats with average thickness not less than 1 mm, of Birla make or any other approved manufacturer, over the plastered wall surface (external/internal) to prepare the surface even and smooth complete including scaffolding for all heights complete as specified and directed by EIC.
Suppllying and appying Chemcial resistant wall coating in Pickling Shop or other areas on plastered surfaces consisting of two component, chemical resistant PU wall coating system, (ARC 70 of “Cipy Polyurethanes pvt ltd” or approved equivalent) including preparation of wall surfaces using approved materials of “Cipy Polyurethanes pvt ltd” or approved equivalent (light abrading the surface and applying water based primer Walprime followed by Walputty applied to give smooth backing for the wall coating followed by primer Finish Prime', cleaning, machine grinding, sealing cracks, etc.), finishing etc. all complete in accordance with approved manufacturer’s specification including scaffolding for all heights complete as specified and directed by EIC.
Providing and applying/ finishing the walls/ RCC surfaces with Premium antifungus 100% Acrylic smooth exterior paint with silicon additives with low VOC (Volatile Organic Compound) content (Snowcryl-XT of 'Snowcem India Ltd. or approved equivalent) of required shades on new work applied in two or more coats at the rate of 1.43 ltr/ 10 Sq.m. over and including base coat of waterproof cement paint (of Snowcem Plus or approved equivalent) including cleaning, preparation of surfaces, curing etc. all complete including scaffolding for all heights complete as specified and directed by EIC.
Wall painting with two coats of premium antifungus100% acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including scaffolding for all heights complete as specified and directed.
Providing cement based waterproofing treatment to new terraces an average thickness of 110 mm (minimum 65 mm thick at outlets) in cement mortar not leaner than 1:4 including cleaning the concrete surfaces, giving injections to the top slab as required with cement and approved waterproofing compound solution to fill up all inherent holes, voids, honey-combs, etc., in the concrete slab, setting brick bat coba in waterproof mortar with necessary gradient for easy flow of water and continue the treatment along the inner faces of parapet or other adjoining wall upto a height of 300 mm in the shape of Vatas, finally treating the top surface and Vatas with waterproof plaster finished smooth with trowel in cement colour with false markings of 300 mm squares etc.generally as indicated in drawings and as per manufacturers specifications and enclosed specifications whichever is superior as directed. 1)The treatment shall be tested by ponding water for a period of 10 days. If due to location of rain water pipes the average thickness of treatment exceeds 110 mm for easy flow of water the extra brickbat coba will be paid as extra item and the rate for the same to be got approved from the Department before execution 2) The waterproofing treatment is to be guaranteed for bone-dry condition for a period of 10 years in the prescribed proforma. 3) The measurement for payment shall be the entire area of terrace covered by the treatment measured between brick/concrete parapets without plaster and the area of vatas calculated by taking the length of vatas and the height above the finished level of the terrace.
Cement supplied by the contractor at their cost
Providing and fixing white glazed Earthen ware double trap, syphonic pattern wash down water closet conforming to IS : 2556 Part II including white plastic solid seat and cover conforming to IS : 2548, CP brass hinges and rubber buffers,10 litres capacity glazed Earthenware low level cistern conforming to IS:774 with internal overflow system & fittings,CP brass 40mm dia flush pipe,15 mm dia ,450mm long PVC connection pipe,ball valve, painting of all exposed matalic surfaces with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved quality red oxide zinc chromate, cutting walls, floors and making good of same, making inlet and outlet connections, finishing etc. all complete.
Providing and fixing white glazed ceramic, flat back half stall type Urinals of 610mm x 400mm x 380mm size conforming to IS:2556 Part-VI, having flush valve based flushing system and complete with approved make flush valve, control cock, elbow set, wall flanges and other accessories, making inlet and outlet connections (including all fittings/ accessories, bottle traps, valves etc) fixing with CP brass screws, flushing etc. all complete.
Providing and fixing glazed Earthenware Hand Wash Basin with antisplash rims on 3 sides, of 550mm x 400mm size conforming to IS : 2556 Part-IV, including approved M.S./C.I. brackets conforming to IS : 775, one 15mm dia CP brass pillar cock, rubber plug with CP brass chain,32mm CP Waste fitting of standard pattern pipe with 32mm dia GI pipe, C.P. brass bottle trap, PVC connection pipes (450mm long), approved qualiity angle stop cock, cutting walls, floors and making good the same, painting all exposed metallic surfaces with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over an approved quality priming coat of red oxide zinc chromate making all connections, finishing etc. all complete.
Providing Handwash basin of white glazed earthen-ware.
Providing and fixing 600mm x 120mm x 4mm thick Glass shelf of approved quality with CP brass bracket and guard rails including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc.all complete.
Providing and fixing approved quality chromium plated brass towel rail of 20mm dia, 600mm length and 1.25mm thickness including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc. all complete.
Providing and fixing Heavy grade fittings/ fixtures such as Bib cocks/ stop cocks/Pillar cocks/Sink Cocks conforming to IS : 781 of approved manufacturer with all necessary accessories, wall flanges, wall caps, including cutting walls etc. making good of same, making inlet and outlet connections, finishing etc. all complete
CP Brass stop cock. Concealed type
CP Brass bib cock.
CP Brass angular stop cock.
Providing and fixing CP Brass Toilet paper holder of approved make with CP brass brackets including fixing to wall with wooden cleats, CP brass screws,cutting walls and making good the same, finishing etc. all complete.
Providing and fixing in position round/ oval shaped counter Hand Wash Basin with anti-splash rims, conforming to IS:2556 Part IV, to fit in exactly and neatly in the cutout in the marble/ granite stone finished R.C.C counter; one 15mm dia CP brass pillar cock, rubber plug with C.P. brass chain, 32mm C.P.waste fitting of standard pattern type with 32mm dia G.I. pipe,C.P.brass bottle trap, cutting walls, counter etc. and making good the same, also including providing cut out in marble/ granite slab counter top (and R.C.C underneath) of exact size and shape for wash basin to fit in neatly and perfectly; making all connections, finishing etc. all complete. (Marble/ Granite counter top shall be paid seperately under relevant item of `Floor Finishing')
Providing round/ oval shaped counter Wash Basin of glazed chinaware in White colour.
Providing and fixing stainless steel Kitchen/ Laboratory sink of approx. Size 610mm x 450mm x 200mm made of min. 1mm thick stainless steel sheet of `Salem Steel' or equivalent supported on and including M.S. brackets conforming to IS: 775; one 15mm dia C.P brass long body bib cock (if fixed to wall) or swivel type pillar cock (if fixed to counter), 15mm dia PVC/ G.I. connections to floor trap with unions etc.; painting all exposed metallic surfaces with min. 2 coats of synthetic enamel paint of approved make and shade over acoat of red oxide zinc chromate primer; cutting floor, walls, counter etc. and making good the same, making all connections, finishing etc. all complete.
Providing and fixing in place on wall/ vertical surface, 8/10mm thick frosted toughened glass urinal partition (of approved make glass, design and shape) with edge grinding, fixing with approved quality stainless steel patch fittings, making good of all damaged work, finishing etc. all complete.
Providing and fixing round edged mirror of 6mm thick float glass with 6mm thick waterproof marine ply backing and rounded/ beveled edging, fixed on wall with wooden cleats and CP brass screws including cutting walls/ tiles, making good the same, finishing etc. all complete.
Providing and fixing CP Brass hand shower (health Faucet, of Jaquar or approved equivalent ) with 8 mm Dia, 1 metre long PVC Tube and Wall hook in approved colour and finish with all necessary fittings etc. all complete.
Providing and fixing approved quality chromium plated brass Soap dish of 100mm width and 130mm length including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc. all complete.
Providing and fixing in position CP Brass double coat hook of approved manufacturer with all necessary accessories, finishing etc. all complete.
Providing & laying UPVC under ground drainage/Sewerage pipes & Fittings of Sudhakar/Nandi/Godavari make for storm water drains& sewerage pipes including excavation and backfilling complete of following size conforming to IS:15328 to proper level & grade, jointing including prviding coupler with cement solvent / welded joints / as per manufacturer's requirement, including encasing the pipe alround using cement concrete 1:3:6 complete to an offeset of D/2 where D= dia of pipe all as per specifictions, drawing and as directed by the E.I.C. item includes Providing and fixing UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc
110 mm DN (SN 8kN/m²-SDR34)
160 mm DN (SN 8kN/m²-SDR34)
Supplying and fixing following size uPVC UV-Stabilised soil / waste quality pipes and fittings ( SWR ) for soil, waste, vent, antisyphonege, HVAC waste pipe and rain water pipe lines including excavation and backfilling complete consisting following items of work:- i) Providing and fixing uPVC UV-Stabilised Soil / waste pipe as per IS:13592 and IS:14735 Grade-B laid in floor & on Exposed faces of wall of Supreme make ii) Fixing the pipeline vertically by Metal clamps with rubber seal of Supreme make Cat. No. SWRMCR 1 to 6. iii) Providing and fixing uPVC cowl at the top of soil, waste water & vent pipe line. iv) Laying the pipe below floor / ground to proper slope and gradient for making connections of soil / waste water pipe line with inspection chamber or Manhole, including the cost of cement mortar, cement concrete, water proofing compound etc. v) Jointing the pipe with Solvent Cement & Rubber ring gasket with making holes in walls / floor grooving and redoing the same and brick support etc. Giving water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at consealed locations. vi) Necessary cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors etc.
a) 75 mm n.b. pipes
b) 100 mm n.b. pipes
Providing uPVC Gully Trap of 150 X 100 mm size with 100 mm outlet with Grating of approved Make, placing at correct position, embedding in cement concrete 1:2:4, 100 mm thick alround complete.
Providing uPVC Floor Trap (Multifloor trap of 110 x 75 x 50 size of Supreme make Cat No. NSPHMTS04L / NSPHMT005L and 3 pc top tile & flush strainer, mat finish of Supreme make Cat No. NSPHTT201L/NSPHTT200L.) / Nahani Trap of following size having not less than 40 mm effective water seal, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, providing and fixing 200 x 200 mm size top tile with central strainer & flat cover / flush strainer, closing the side inletes with plugs if required etc. all complete as per specification and as directed by EIC.
Supplying and fixing fabricated stainless steel SS 304 Floor Trap with steel grating on top including cutting floors, welding/cutting to existing under ground pipes and making good the same, etc., making inlet and outlet connections, etc. complete for 300x300mm inlet and 80mm outlet as per drawings, specifications and directions of Engineer-in-Charge.
Supplying and fixing fabricated stainless steel SS 304 Floor Trap with steel grating on top including cutting floors, welding/cutting to existing under ground pipes and making good the same, etc., making inlet and outlet connections, etc. complete for 300x300mm inlet and 150mm outlet as per drawings, specifications and directions of Engineer-in-Charge.
Supplying, fabrication and fixing in position black steel tube vent pipes (Medium class as per IS:1239) 100mm dia. with specials and necessary fittings including cutting to required length, edge preparation, jointing by welding, making and fixing single joint mitre bends wherever required, earth work in excavation and back filling, fixing in concrete blocks, providing painting with 2 coats of chlorinated rubber zinc phosphate primer @ 40μ DFT per coat and finished paint of 2 coats of chlorinated rubber paint @ 40 μ DFT per coat on above grade portion and supplying and fixing clamps, corrosion protection tape coating for underground portion complete in all respects including all labour and materials, etc. as per drawings specifications and direction of Engineer-in-Charge.
Cutting of RCC using Diamond saw or any other suitable equipment, for Core cutting for fixing vent pipes including disposal of debris as directed by Engineer in Charge, complete
Construction of rectangular CHAMBERS of internal clear dimension of mentioned below ( internal clear) in 230 mm thick brick masonry in cement mortar 1:6 over a bed of 150 mm thick 1:4:8 cement concrete in foundation, plastering with cement mortar 1:4, 20 mm thick on inside, and all outside exposed surfaces finished with a floating coat of neat cement, 1:2:4 cement concrete for benching in slope 1 in 30 and channel finished with neat cement, brick corbelling at top if necessary to provide clear opening and providing and fixing CI cover with frame of light duty single seal pattern weight not less than 33 kgs embedded in cement concrete 1:2:4, providing and fixing PVC encaptualted MS rungs of 20mm square, each at 300 mm centre to centre if depth exceeds 800 mm, painting CI cover and frame and CI steps with two coats of bitumastic paint etc. complete-For depth of chamber not exceeding 900 mm. However minimum depth of chamber not less than 450mm
Providing and fixing 160 mm n.b.un-plasticised PVC rain water pipes with necessary PVC clamps and wooden gutties of approved make conforming to IS: 13592 type ‘A’with injection moulded fittings jointing with approved synthetic adhesive seal rings conforming to IS: 5382 embedding the slab junctions leakproof testing complete in line, level and plumb all as directed.
Sealing 50mm thick expansion joints with premium grade two part polysulphide sealant (based on LP liquid sulphide) over and including primer (specially developed for use with polysulphide sealant material and as approved) and back-up materials of polyethylene strip or other bondbreaker (all as per manufacturer's specification), sealant being mixed (the base and the curing agent thoroughly mixed with slow speed electric mixer) and applied by sealant gun and `sealant application kit' including drying of surfaces before application by wire brushing, finishing etc. all complete.
Providing and fixing 200 mm wide in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints complete as specified and directed
Providing and fixing flexible PVC flooring and skirting using 2 mm thick (having conforming to IS 3462, manufactured by M/s. Wonder floor/ Premier/ Tusker/ Responsive polymers or any other approved make, shade, pattern and design, repairing and leveling the patches of existing flooring with any approved filler including fixing the new rolls to flooring with approved synthetic adhesive as per manufacturer’s specifications including cutting the tiles/ rolls to required shape and size, providing V- groove and welding all joints using approved vinyl electrodes conforming to IS 8004, smoothening and cutting the welded beads, rolling over the joints with 20 kgs. Roller after finishing in line, level including cost of all materials, machinery and labour etc., complete as specified and directed.
Providing & Fixing 16mm x 200mm long GI threaded anchor of Hilti Make complete as specified and directed
Supplying & Fixing epoxy injectable chemical anchoring including drilling of holes for post-installed anchors and rebar fixings of size 16mm complete as specified and directed . Anchors shall be paid separately
For Structural members made out of Hot Rolled section of minimum Grade E250A / E250B0/ E250BR (confirming to IS:2062) for Platform, ladder with cage, Sag Rod, Cleats, supporting hanger for erection, connection bolts etc., including preparing the surface for painting (SSPC-SP-3) and applying pre-erection/ shop primer (1 coat of Inorganic zinc silicate @ 65-75 micron DFT) after fabrication etc., all complete. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE.
Supplying and applying COATING (Post-erection/ Field) of two part acrylic polyurethane finish paint of approved quality and shade over the coat of shop primer already applied, including storage, surface preparation, degreasing, cleaning, drying, providing necessary arrangement for access, testing etc. including touching up of shop primer coat, for steel structures at all location & levels, all complete. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE. (Unit rate based on Structural steel weight).
Cutting/openining of GI roof/cladds sheets of building including dismantling of subgirt/subpurlin and transporting the serviceable/unseviceable material to stores
Providing and fixing in position approved quality weather tight accessories (in conventional or pre engineered buildings) such as ridge piece, corner piece, various types of flashings, gutters (including straps), trims in roofing, cladding, rain water pipe concealments etc. in required shape and profile made of steel sheet (sheet thickness & specification and coating similar to external steel sheet of roof & cladding sheeting, item no A008.21.00M01) in accordance with approved fabrication dwg (prepared by Contractor) including necessary cutting, profiling, sealants, EPDM/beadings, structurals, support, preparation of fabrication drawings etc. all complete in accordance with approved manufacturer's standard practice Note: Only superficial area of sheeting shall be measured for payment. No payment shall be made for wastages, cutting, lapping, structurals, supports etc
Technical Construction Company
JYOTI SARUP MITTAL
Durga Impex
stage.html
html • 0.02 MB
finance_794902.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .