ESTABLISHMENT OF CONTROL CUM ANIMAL RESCUE CENTRE AT PINGLEAN PULWAMA

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in Charge.All kinds of soil :

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Supplying and filling of RBM in plinth incl. spreading, dressing,watering with all carrriage etc complete

5.00 P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe 500D or more. Reinforcement @ for all rcc work

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers.

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

FRAMES Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):KD wood or equivalent.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.30 mm KD wood or equivalent.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineerin charge :35mm KD wood or equivalent.

Providing and fixing glass panes with required beading and glazing clips in doors, windows, clerestory windows, all complete with : 3mm glass panes

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. 75mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm

Providing and fixing ISI marked oxidized M.S. air hook with necessary screws equivalent

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) Outer walls, Inner walls,slab and floor

6MM CEMENT PLASTER 6 mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand)

15 mm Cement Plaster 15 mm cement plaster on the rough side of single or half brick wall of mix 1 : 4 (1 cement : 4 fine sand)

Ruled/ Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust ( the rate is inclusive of all materials and labours involved except scaffolding)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 ltrs

VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.

MARBLE Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab over 0.5 sqm)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

DEVRI STONE WORK Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Rough chisel dressed

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.12 mm thick Fire retardant plywood conforming to IS: 5509

Providing and fixing wooden panelling 15mm thick over framming work of required pattern and design water proof strips of ply board imported wood panelling for ceiling/walling(imported wood/RAIT wood) incl ply wood framing.

Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid

Providing and applying touch-up wood polish on existing wooden surfaces, including sanding, filling minor cracks/imperfections, and applying 1–2 coats of approved synthetic enamel or wood polish, complete in all respects as directed by the Engineer-in-Charge.

WOODEN FLOORING Wooden planking, tongued and grooved in flooring including fixing with iron screws complete:18 mm thick Second class deodar wood

TRUSS Woodwork Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. First class Budloo/Fir wood

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :200 mm dia. Pipe

Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.1.60 mm thick with zinc coating not less than 350 gram/m2

ROOF SOFFIT Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws Budloo/fir wood

ROOF FASCIA Providing and fixing plained eaves boarding. 2nd class Deodar wood 250x32 mm (nominal size)

TRUSS Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2

PART B-SANITARY WORKS Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Washbasin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink conforming to IS: 13983, complete with C.I. brackets and 40 mm stainless steel plug, including painting of fittings and brackets, cutting and making good the walls wherever required, complete. Kitchen sink with drain board size 510 × 1040 mm, bowl depth 200 mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32 MM DIA

Providing and fixing jali for water closet or wash basin including P.V.C waste fittings complete:

Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes 100 mm dia. Pipe,

Providing and fixing pvc pipes class c pipe incl soil waste and vent pipes 100 MM

Providing and fixing pvc pipes class c pipe incl soil waste and vent pipes 75 MM

PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.External work including trenching, refilling etc.PN-16 pipe, 40mm OD (SDR-7.

PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and antimicrobial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD(SDR-7.4)

Providing & Fixing PVC ( Prince Make) following fittings complete Door Tee 100mm size

Door Tee 75mm size

PVC collar 100mm

PVC collar 75mm

PVC Reducer 100x75mm

Floor Trap 100 mm size

Plain Bend 100 mm size

Plain Bend 75 mm size

Door bend 100mm

Door bend 75mm

P/F of Geysers 50-Litre 2000-Watt Storage Water Heater (White) incl. all fittings and fixtures make: venus, jacquar , racold or equivalent

P/F of Geysers 50-Litre 2000-Watt Storage Water Heater (White) incl. all fittings and fixtures make: venus, jacquar , racold or equivalent

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge (a) 15 mm nominal dia

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge

PART C-ELECTRICAL Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box nd earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Wiring for light/power plug points (15/16A heating points) with 2x4sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC Insulated copper conductor single core cable for earthing, etc. as required. (Havells/Polycab/ Anchor/ Finolex/KEI/RR or equivalent) including the cost of conduit.

Wiring for 5-10A socket out lets for computer (Inverter) with 2X2.5 sq. mm FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit, alongwith 1No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for earthing etc. as required.including the cost of conduit.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including conduit as required. 32mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supply and fix LED Bulb 18W,230V Energy Efficient lamp Make : PHILLIPS, SURYA, SYSKA

Supply and installation of 300 mm, 900 RPM, single-phase heavy duty exhaust fan, including wiring, mounting frame, and testing. Make: Crompton / Havells / Equivalent

Supplying and fixing of MCB board with required MCBs and box, including all necessary fittings and fixtures, complete in all respects as per site requirements. The MCB distribution board shall be metallic, IP42/43-rated, double-door, surface/recessed type, suitable for single-phase/three-phase systems, prewired with copper bus bars, neutral and earth links, interconnections, and DIN rail for mounting MCBs. MCBs shall be ISI-marked, modular type, conforming to IS: 8828 (latest edition), with SP/DP/TP/TPN configurations of appropriate ratings (6A, 10A, 16A, 32A, 63A) as per load requirements. The installation shall include all necessary accessories, connectors, lugs, conduit/cable entry fittings, and proper earthing as per IS: 3043. The work shall be carried out as per standard electrical norms, ensuring proper alignment, secure mounting, and safe connections, followed by testing and commissioning to ensure proper functionality.

Supply and Fixing ceiling fan 1200mm sweep with downrod,canopy and connecting up including provision of cable withmulti stranded copper conductor cable of size 0.75 Sqmm fromceiling rose to connector of ceiling fan and connecting up complete all as specified and as directed. Make : Usha / Havells / Crompton Greaves

Crriage of different materials by mechanical transport incl. head load for stacking at site @ 15KMS Sand 200 mtrs

Steel

Cement

Aggregate

Timber

Bricks

Carriage of different materials by mechanical transport incl head load or stacking at site Sand 50 mtrs

Steel

Cement

Aggregate

Timber

Bricks

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in Charge.All kinds of soil :

P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe 500D or more. Reinforcement @ for all rcc work

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) Outer walls, Inner walls,slab and floor

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and fixing brick tile work on outer walls with 12mm thick cement mortar (1:3), including surface preparation, cleaning, and wetting of tiles before fixing, complete as per specifications and directions of the engineer-in-charge. The work includes pointing with cement mortar (1:3), ensuring proper finishing and curing. Additionally, a coat of primer shall be applied over the brick tile work, followed by two coats of weatherproof exterior paint of approved brand and shade. The rate shall be inclusive of all materials, labor, scaffolding, necessary tools, and carriage for a complete finish. The brick tile shall have a thickness ranging from 12mm with a standard size of 30 x 60 cm or as directed by engineer in charge, a breaking strength of 1300 N, and a density of 220 gm, ensuring durability and suitability for exterior applications. It should be machine-cut, well-finished, and free from cracks or defects, meeting relevant quality standards.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Crriage of different materials by mechanical transport incl. head load for stacking at site @ 15KMS Sand 200

Steel

Cement

Aggregate

Carriage of different materials by mechanical transport incl head load or stacking at site Sand 50 mtrs

Steel

Cement

Aggregate

Please Enable Macros to View BoQ information