REPAIR TO FLOORING/TILING, CEILING, ROOF, SANITARY FITTINGS , PANELLING , JOINERY, PLUMBING WORK INCLUDING INTERNAL WIRING AT HQ CIF(R) SIG REGT UNDER AGE (I) CIF (R) AT PALMA

Amount

PART-I (B&R Works)

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un-reinforced, complete all as specified.

Demolition of reinforced cement concrete of any description and in any poistion not otherwise specifically provided for , complete all as specified.

Taking down cement plaster/dado(Terrazo) on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.

Taking down and Refixing of shutters of any description in same opening not exc. 1 Sqm each, complete all as directed by Eng-in-charge.

Taking down and Refixing of shutters of any description in same opening exc. 1 Sqm but n exc 2 sqm each, complete all as directed by Eng-in-charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, , complete all as specified.

Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6,complete all as specified and as directed.

Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan to any radius, built in cement mortar 1 :4 in half brick wall, complete all as specified

Plain cement concrete ,1:3:6, type C-2, using 40mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified. Note:- The unit rate include for use of form work (straight or curved).

PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in foundations, filling, mass concrete, complete all as specified & directed.

Reinforced cement concrete ,1:2:4, type B-1, using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

Use and Waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surfaces of concrete flat, complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises, complete all as specified.

25mm thick PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in levelling course, surface finished even and fair, complete all as specified.

Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified. Make: Kajaria/Somany/NITCO/Johnson

Glazed ceramic tiles, digital pattern coloured of size 350x 250x 7 mm/ 450X 350X 7mm thick such as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as specified. Make: Kajaria/Somany/NITCO/Johnson

Glazed ceramic tiles, coloured of size 200mmx300mm, 7mm thick as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement, laid over and including 15mm thick plastering in cement mortar 1:6, complete all as specified.

Vitrified tiles (Light Shade), 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified. Make: Kajaria/Somany/NITCO/Johnson

Vitrified tiles (Light Shade), 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as specified. Make: Kajaria/Somany/NITCO/Johnson

Vitreous China wash basin, angle back, size 600x480mm white, including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC 32mm dia waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified. Make: Cera/Hindware/Parryware

Vitreous China wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, fixing with screws of suitable size, plastic seat cover, white closed pattern with flat bottom and cover, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, fixed in repairs, complete all as specified. Make: Hindware/Cera/Parryware

Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing,fixed in repair, all as specified. Make: Cat Part No. 2071 of 'Cera' or equivalent makes

Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; s, flush pipe, grating and Union for discharge pipe, fixed in repair, complete all as specified.

PVC waste pipe flexible for wash hand basin/urinal any size, fixed in repair complete all as specified.

PVC valveless syphonic action low level flushing cistern 10 ltr cap with inlet valve float & handle including PVC flush pipe, fixed in repairs, complete all as specified. Make: Commander/Hindware/Slimline(Parryware)

PVC connections 15mm size with PTMT nuts of length 300mm (ISI Marked), fixed in repairs, complete all as specified.

Brass, Chromium plated, Tubular towel rail,20mm dia, D type, 60cm long between flanges, complete all as specified.

Brass chromium plated shower rose of 125mm size with or without swivel joints, fixed in repair complete all as specified Make:Cera/Parko/Ess Ess

Pillar cock fancy type long neck cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe 15mm dia bore and fixed complete all as specified. Make:Cera/Parko/Ess Ess/Jainko

15mm bore, Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, fixed in repair, complete all as specified. Make:Cera/Parko/Ess Ess/Jainko

15mm bore, Bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, fixed in repair, complete all as specified. Make:Cera/Parko/Ess Ess/Jainko

Brass Chromium Plated, Hand Shower (Health Faucet) (ABS Body) with 1.5 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook, fixed in repair, complete all as specified.

75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, fixed in repair, complete all as specified. Make : Supreme/Finolex

75mm bore, PVC (SWR) floor trap, plain with grating including jointing with solvent cement, fixed in repair, complete all as specified.

Grating doom 125mm dia with waste hole of PTMT. (Minimum weight 40gms), fixed in repair, complete all as specified.

Prepolished Chequerred cement concrete tiles 200X200X 25mm thick glossy finish set and jointed in neat cement slurry with grey cement and pigments to match the colours of tills laid over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified.

15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified.

10mm thick plastering in cement mortar 1:6 on fair faces of brick surfaces or concrete surfaces on ceiling , surface finished even and smooth without using extra cement, complete all as specified.

15mm thick plastering in cement mortar 1:6 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified.

Dismantling wall & ceiling board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified.

9 mm thick Gypsum tile colour touch in ceiling ,sizing 595 x 595mm with and including La Gyp T bar metal profile manufactured from high quality galvanised steel,main runner 24 x 33mm,thickness 0.3mm,cross runner 24 x 25 mm,thickness 0.3mm,wall angle 18x18 mm along with other system components accessories such as butterfly clip 0.5 mm thick hold down clip 0.4 mm thick and duly suspended with GI bar hangers by royal plugs etc and necessary drilling etc.as per manufactureres instructions,Complete all as specified and directed by Engineer-in-Charge

Preparation of new plastered or concrete surfaces of wall and applying two coats of cement base paint over one coat of primer complete all as specified.

Preperation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified.

Preperation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified.

20mm thick, Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified.

Stainless steel sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. and overall size 915x460mm with bowl size 410x330x160mm, complete all as specified & directed. Make : Nirali/ Diamond

PART-II (E&M Works)

Taking down carefully copper/aluminium point wiring (light/Fan socket or power) with complete fittings such as switch, sockets Ceiling rose pendent holders regulators etc., removing old/UNSV material from site and making good the old disturbed surface, complete all as directed.

Point wiring complete with 1.5 Sqmm single core multi stranded copper conductor (FRLS) cable PVC insulated unsheathed cable 1100 volt grade conforming to IS-694 enclosed and including PVC rigid non metallic 25mm PVC casing capping (double lock) with fittings and accessories fixed to walls/ceiling by means of PVC rowl plugs fasteners with cadmium plated screws all as per IS including hard wood board and 3mm thick laminated sheet top covers including 1 Sqmm copper PVC insulated unsheathed continuous earth wire and connected to common earth dolly for One light/fan/5 Amp socket independent/bell controlled by one, one way switch. Make of cable: Finolex/Havells/Polycab Make of Casing Capping : Modi/Plaza/Polycab

All as per Srl item No 2.02 above but for one 3 pin 5 Amp socket out let on the independent board with other switches.

All as per Srl item No 2.02 above but for one 3 pin 5 Amp socket out let on the same board with other switches.

All as per Srl item No 2.02 above but with 2.5 Sqmm single core multi stranded copper conductor (FRLS) cable for 3 pin 15 Amps socket outlet on independent board, including 1.5 Sqmm PVC insulated unsheathed continuous earth wire and connecting to common earth dolly. Make of cable: Finolex/Havells/Polycab Make of Casing Capping : Modi/Plaza/Polycab

Switch, piano, type 230/250 volts grade, single pole, one way, 5/6 Amps , complete all as directed. Make: Havells/Cona/SSK

Switch Socket combination of 2 in 1, 3 pin 5 Amp flush type universal complete all as directed.. Make: Havells/Cona/SSK

Switch socket combination of 2 in 1, 5 pin 5 and 15 Amps flush type universal complete all as directed.. Make: Havells/Cona/SSK

Ceiling rose surface bakelite 65x50mm, two to three terminals and fixed in replacement complete all as directed. Make: Havells/Cona/SSK

Lamp holder PVC type with back plate suitable for batten fitting and fixed in replacement complete all as directed.. Make: Havells/Cona/SSK

Fan Regulator electronictype suitable for 300 Watt (heavy duty) type 250V, AC for ceiling fan and fixed in replacement complete all as directed.. Make: Havells/Cona/SSK

LED TRIM PANEL LIGHT SQUARE 20 W 6500 K, Slim polycarbonate panel light luminaire for grid ceiling complete with separate electronic driver and connecting up with three core copper conductor cable of suitable size including taking down old. Make : Havells Cat Part No LHEBLDP7IN1W020 or equivalent of Crompton Greaves/Philips/polycab.

LED bulb of 15 watt B-22 base and fixed in repairs complete all as directed. Make: Havells/Crompton/Philips

Decorative Slim Linear LED Batten, 20W 6500K (1.15 m (1150 mm)), Polycarbonate Body, Lumens Efficiency 100 Lumens/Watt l mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete including connecting up with thre core twisted flexible copper conductor cable of suitable size including taking down old. Make: Havells Cat Part No. LHEXACP7IN1W02020 or eqivalent in Philips/Crompton/polycab

Rewinding of ceiling fan motor with copper super enameled wire of suitable size and gauge suitable for ceiling fan of size 1400/1200mm sweep with complete insulating material after removing burnt coil of motor, varnishing, fixing of old bushes or bearing including replacement of rubber reel, split, pins ,bolts, check nuts, washers, screws for blades as required, complete in all respect and testing on full load speeds, complete all as specified and as directed.

Supply and fixing in replacement of ball bearing of size 6200 to 6204 suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed. .Make :- NBC/SKF

Servicing of Air conditioner/ Water Cooler/ Refrigrator/ Deep freezer of any capacity and type complete with chemical solution to condenser & cooling coil, cleaning of entire elements , oiling/greasing to motor including tracing out leaking of condensor/evaporator anf repairing the holes by gas welding complete with refilling of refrigant R-12/R-11/R-13 (whichever is applicable) , complete all as specified.

Servicing of Desert Cooler by repair and replacement of Fan Motor, Submersible pump with grass wood wool cooling pads of suitable size complete all as specified.

PART-III (Schedule of Credit) Amount of credit of Rs. 12626.00 for retrieved material mentioned in Sch `A' Part-III of tender documents in PDF form which will be deducted offline during acceptance of tender.

KANWAL KUMAR GUPTA

arneesh kumar suri

M/s Anil Engineers & Builders