Construction of Hostel at Mahila College, Chatra District under Vinoba Bhave University, Hazaribagh

Amount

Earth work in excavation in foundation trenches in ordinary soil (wide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50M, including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I

Filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume).

Carriage rate of materials by diesel truck (8.M.T.capacity ) including loading, unloading and stacking on pucca road lead up to 4 KM.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size )

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement: 3 coarse sand (zone-III) : 6 graded stone aggregate 40 mm nominal size )

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement: 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size )

Providing and laying in position specified grade of RCC, excluding the cost of centering, shuttering , finishing and reinforcement- All work up to plinth level :1:2:4 (1 Cement: 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size )

Providing and laying in position specified grade of RCC, excluding the cost of centering, shuttering , finishing and reinforcement- All work up to plinth level :1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size )

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work ; using coarse aggregate and fine aggregate derived from nature sources, portland pozzolana / ordinary portland / slag cement admistures in recommended proportions as per IS : 9103 to accelerate / retared setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All work up to Plinth level

Concrete of M25 grade with minimum cement content of 330 kg/cum

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work ; using coarse aggregate and fine aggregate derived from nature sources, portland pozzolana / ordinary portland / slag cement admistures in recommended proportions as per IS : 9103 to accelerate / retared setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All work plinth level Above upto floor V level

Concrete of M25 grade with minimum cement content of 330 kg/cum

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves board above plinth level up to Floor Five Level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 Cement :1.5 coarse sand 3 graded stone aggregate 20 mm nominal size).

Providing reinforcement (Round bars confirming to I.S. 432 dia in mm (I.S. 2062 Gr A) of 6 & 8 mm dia rods as per approved design and drawing excluding carriage of bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.(i) 10 mm dia Gr. A

Providing Tor steel reinforcement of 8 mm. dia rods as per approved (TMT Fe 500) (Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel steels Ltd. Bokaro and Vizag (RINL)10% of Total Steel Qty

(a) 10mm (TMT FE 500) (Only valid for SAIL, TATA Steel, JSPL,Vizag Steel)10% of Total Steel Qty

(b)12mm (TMT Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steel Ltd, Bokaro and Vizag RINL) 20% of Total Steel Qty

© 16mm (TMT Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steel Ltd, Bokaro and Vizag RINL) 50% of Total Steel Qty

20/25 mm dia TMT bar Fe 500 (only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steel Ltd, Bokaro and Vizag RINL) 10% of Total Steel Qty

Centering and shuttering including strutting, propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

Columns, Pillars, Piers, Abutments, Posts and Struts

Suspended floors, roofs, landings, balconies and access platform

Weather shade , Chajjas, corbels etc. including edges.

Providing precast cement concrete Jali 1:2:4 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate ),

50 mm thick

Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x 4.5" x 3") in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, rakingout joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I

Providing designation 100 A brick work in superStructure with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3" in C.M (1: 6) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick /mortar joints, cost of scr`eening materials, raking out Joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing designation 100 A brick work in superStructure with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3" in C.M (1: 4) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick /mortar joints, cost of scr`eening materials, raking out Joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Extra for brick work for each consecutive floor above first floor including watering and scaffolding, all complete as per direction of E/I.

Second Floor

Third Floor

Fourth Floor

Mumty ,Machine Room & Parapet Wall

Providing 250 mm thick brick jali approved quality of clean coarse sand of F.M. 2 to 2.5, finishing with deep ruled pointing in C.M. (1:3) with sand of F.M. 1.5 on entire surface including the cost of finishing the holes, screening carriage of materials , scaffolding, raking out jaoints to 15 mm depth, curing, faxes and royalty all complete , as per approved design, building specification and direction of E/l.

Providing 6mm Cement Plaster (1:4) in ceiling with clean course sand of F.M 1.5 including screening , curing with all leads and lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening , curing with all leads and lifts of water,scaffolding taxes and royalty all complete as per building specification and direction of E/I

Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M 1.5 including screening , curing with all leads and lifts of water,scaffolding taxes and royalty all complete as per building specification and direction of E/I

Extra for plaster work over exterior surafce for each consecutive floor above first floor including cost of scaffolding etc. all complete as per direction of E/I

II nd Floor

III rd Floor

IVth Floor

Mumty ,Machine Room & Parapet Wall

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coats

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the costof EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness .

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.

Powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providingweather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction ofEngineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600

Upto 5 mm depth and 5 mm width

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge

Profile B Fixing with adjustable lugs with split end tail to each jamb

Supplying, fitting and fixing 35mm thick solid core type non- decorative double leaf flush door shutter in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings all complete as per building specification and direction of E/I.

Supplying, fitting and fixing 35mm thick solid core type non- decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings all complete as per building specification and direction of E/I.

Supplying, fitting and fixing 30mm thick solid core type non- decorative double leaf flush shutter with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges,tower bolts,handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing primer one coat of approved shade and make over new wooden surface including preparing the surface after cleaning , removing dirt, scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction E/I

Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt, scales, smokes, grease and sand papering , including cost of scaffolding and taxes all complete as per building specification and direction of E/I

Deduct for not providing hinges in doors, windows or clerestory window shutters with :

ISI marked M.S. pressed butt hinges bright finished of required size.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. usset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Using M.S. angels 40x40x6 mm for diagonal braces

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading

Supplying fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2 mm at 100mm Centers and braced with M.S flat diagonals 20x3mm with top and bottom rails of T iron 40x40x6mm 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint ,car riage, hosting and taxes all complete as per building specification and direction E/I.

Supplying fitting and fixing MS grill made of 20x6mm MS Flat as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I

Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I.

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including preparing the surface after cleaning , removing dirt, scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction E/I

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1068) transparent or dyed to required colour and shade with necessary screws etc. complete

Twin rubber stopper

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868 ), tranparent or dyed to required colour or shade with nuts and screw etc. complete

Providing and fixing aluminium handle ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868 ), tranparent or dyed to required colour or shade with nuts and screw etc. complete

Providing and fixing aluminium tower, bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to require colour or shade with necessary screw etc. complete

Providing and fixing fan hook of 16 mm dia M.S. bar 1 metre long bent to required size and shape placed in position and fixed in R.C.C. Slab/beam at the time of casting all complete as per building specification and direction of E/I. (where material is not supplied by Deptt).

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete :

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and laying doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622/ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600mm sizes

Providing and laying vitrified Paring / Industrial tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622/ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 300x300mm sizes

Providing and laying 6mm precast glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including (rubbing , polishing and cost of curing taxes and royalty all complete as per building specification and direction of E/I.

With "A" grade

Providing and laying 25mm thick kota stone slab flooring of approved size, texture and colour over 19mm thick base of lime mortar (1:1:1) (lime putty: surkhi: coarse sand) laid over and joined with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing , taxes and royalty all complete as per building specification and direction of E/I.(iv) 600 x 600 mm size

Providing and laying 25mm thick kota stone tiles in risers of steps, skirting and pillars of approves size, texture and color laid over 12mm thick cement mortar (1:3) and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes, and royalty all complete as per building specification and direction of E/I. (ii)1500 *300 / 125 mm size

Extra for pre finished nosing in treads of steps of kota stone / sand stone slab

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)

Ordinary cement without any pigment

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platform vanity counters window sills facias and similar locations of required size approved shade,colour and texture laid over 20mm thick base cement mortar 1:4, joints treated with white cement , mixed with matching pigment, epoxy touchups, including rubbing , curing, molding and polishing to edges to give high gloss finish.

Granite stone slab of colour black cherry /rubey red area of slab over 0.5 Sq.mt.

Extra for pre finished nosing to treads of step of marble stone

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm)

i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles

Water Proofing for New Roof Slab - Providing and laying water proofing treatment on roof slab by applying two component, factory designed, ready to use, acrylic modified flexible material applied with brush, roller or spray for water proofing coating as per manufacturer specifications with following steps : -

(a) Surface preparation : - Providing and cleaning of concrete surface to remove dust, oil grease including removal of existing loose paint/ coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika India Pvt. Ltd./ MYK Schomberg/ Dr. Fixit/ Fosroc or equivalent. Providing and repairing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with 150mm x 150mm fillet of mortar (Cement sand- 1:4) admixed with acrylic polymer of Sika/ Fosroc/ MYK Schomberg/

Dr. Fixit or equivalent. Before chamfering a prime coat shall be given with the slurry of acrylic polymer. Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.

(b) Ist Coat:- Apply 1st coat of two component acrylic modified, ready to use, flexible cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat of application, 45gsm of Fibre glass cloth to lay when the first layer is still green. 1st coat should be applied @ 1.50 kg/Sqmt/coat. for the purpose of measurement the entire treated surface will be measured.

(c) 2nd Coat:- To apply the 2nd coat of two component acrylic modified ready to use flexible cementitious material right angel to the 1st coat over the glass fibre laid surface. 2nd coat should be applied @0.7 kg/ Sqmt/coat. For the purpose of measurement the entire treated surface will be measured. After three days of drying the 2nd coat, the rain water outlets to be plugged test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of E/C. The waterproof coating to be protected from damaged before screed over it. Water proofing Brand:- Sika Topseal 109hi/ Fosroc Brushbond RFX/ Dr. Fixit Pidiffin 2K/MYK Aquafin TG. Product Performance- Chemical Base Part A:

Acrylic copolymer, Part B: Specially graded cementitious powder - Density 1.6 kg/l (mixed density) at +270C. Tensile strength -2 N/mm2 after 28 days (with Fibre cloth) According to ASTM D 2370) Pullout Bond Strength -2 N/mm2 (concrete failure) (According to ISO 4624) Slant-Shear Bond Strength - 4 N/mm2 (According to FIP 5.15) Elongation at Break - 35% without Fibre Cloth and 20% with Fibre Cloth (According to ASTM D 2370)

(d) Protection of treated surface with PCC : - The treated surface should be covered with 25mm/50 mm PCC of M-20 grade (1:1:5:3) with proper slope (1:120) towards the rain outlets in alternate panels of 2 mt/ 2mt keeping 6mm gap between the panel joint. Integral water proofing admixture conforming to IS 2545 @ of 100 ml per bag of cement to be added in the screed concrete (paid separately for this items). All corners shall be chamfered with 150mm x 150 mm fillet. The rainwater outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - the peripheral gaps between PVC pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed

with moisture insensitive epoxy putty of Sika India Pvt. Ltd./ MYK Schomberg/ Dr. Fixit. Fosroc. For the purpose of measurement the entire treated surface will be measured. (e) Groove of PCC surface should be filled with Polysulphide Sealant. (Paid Separately) Brand - Sika India Pvt. Ltd. /MYK Schomberg/ Dr. Fixit/ Fosroc. Warranty for five years.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for plasticised Rigid PVC rain water pipes onforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(Single socketed pipes)

110 mm bend

Shoe (Plain)

110 mm bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.

110 mm diameter

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement: 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size )

No of Tank = 10 Nos

Centering and shuttering including strutting, propping etc. and removal of form for

Suspended floors, roofs, landings, balconies and access platform

Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soi

Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

150 mm dia. R.C.C. pipe

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

150 mm nominal size dia

Cost of drilling 200mm x 165mm x 125mtr. Deep borewell in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH rig machine, all complete including supply all materials, tools, drilling rig, Air compcompressor and equipments, as well as fule lubricants and cost of transportation of rig machine and other vehhicles upto the size.

From 0-50 mtr.

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).

150 mm dia

CARRIAGE OF MATERIAL

Coarse Sand (10 Km)

Stone Chipps / Stone Aggregate (22 Km)

Brick (8 Km)

INTERNAL ELECTRIFICATION

Point wiring in PVC conduit, with moduar type switch :

Wiring point for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular type switch, modular plate, suitable size G.I box etc as required.

GROUP A

GROUP B

GROUP C

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch, one way switch

5/6 A, 3 pin socket outlet

5/6 A, two way switch

TV antenna socket outlet

S/F Modular type electronic fan regulator:-

Supply and fixing stepped type electroncs fan regulator on the existing modular plate & switch box including connection but excluding modular plate etc. as required.

S/F Light Plug point with modular type accessories :-

Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps. Modular socket outlet and 5/6 amps modular type switch connection painting etc, as required.(for light plugs to be used in non residential building)

S/F Power Plug point with modular type accessories :-

Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps. Modular socket outlet and 15/16 amps modular type switch connection painting etc, as required.(for light plugs to be used in non residential building)

Wiring for light point/power plug point with 2x4.0 sq. mm. FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 no. 4 sq. mm.FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 25 amps. Modular socket outlet 25 amps modular type switch and 25 amp SP MCB "C" curve connection painting etc, as required.

S/F Modular type blanking plate:-

Supplying and fixing modular blanking plate on the existing modular plate & switch box, base & cover plate

Circuit/submain wiring in PVC conduit :

Wiring for Circuit/submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required

2x2.5 sq.mm + 1 x 2.5 sq.mm earth wire

2x4.0 sq.mm + 1 x 4.0 sq.mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of grade excedding 1.1 KV but not excedding 120 sq mm direct in ground in the same tench in one tier horizontal formaion including excavation, sand cushioning, protective covering and refilling the trench etc as rquired.

70 sqmm 3.5 core

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

BLDC CEILING FAN

Supply, Installation, Testing and Commissioning of following size ceilling fan 3 Blades confirming to IS : 374-2019 including wiring the down rods of standard length (up to 30 cm) with 1.5 sq.mm. FR PVC insulated, copper wire suitable for 230V 50 Hz. single Phase supply etc. complete as required.

1200 mm(48'') BLDC 5 star rating 32W Ceiling Fan

1400 mm(56'') BLDC 5 star rating 32W Ceiling Fan

G.I. Earth Pipe electrode with salt/charcoal

Earthing with copper earth plate 600mm x 600mm x3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal and salt) as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. Strip on surface or in recess for connection etc. as required.

P/F G.I. Lightning conductor finial:- providing and fixing of lighting conductor finial, made of 25mm dia 300mm long, G.I. Tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. Complete as required

P/F G.I. lightning conductor tape in horizontal run :- Providing and fixing G.I. tape 20 mm x 3mm thick on parapet or suface of wall for lighting conductor complete as required. (for Horizontal run).

P/F G.I. lightning conductor tape in vertical run :- Providing and fixing G.I. tape 20 mm x 3mm thick on parapet or suface of wall for lighting conductor complete as required. (for Vertical run).

S/F 'C' series, MCB:-

Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

6/32 amps, SPN

40 amps, SPN

50/63 amps, DP

LED Lighting

S.I.T.C of following rating reccess/Surfcae mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply volage. Luminarie shall be confirm to IS:10322 part-5/section-2 or ICE: 62722 with all necessary acessories as required

6/7W LED Round Down Light

12W LED Round Down Light

9/10Watt LED Bulb

S/F Electronic musical bell:-

Supply and fixing Electronics musical call bell single phase.230 volt Complete as required

S.I.T.C of Floowing rating LED street lighging luminarie with pressure die cast housing and toughened glas cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270 AC, 50 Hz. Luminaries shall be confirm to IS: 10322 part -5/ section-3 and shall be completed with all neccessary accessories as required

25W LED street light

S.I.T.C of following rating mounted LED tubelight fitting suitable for 230V 50 Hz, single phase supply etc. complete as required

10/12W LED Tube light

20/22W LED Tube light

Bulk head fitting with 9/10 watt CFL/LED

S/F S.P. MCB DB:-

Supplying and fixing following way, single pole and neutral,sheet steel,MCB distbution board, 240 volts, on surface/recess, complete with tinned copper busbar ,neutral bus bar , earth bar,din bar,interconnections, powder painted including earthing etc. as required. (but without MCB/RCCB/Insolator).

For 8 way, Double door SPN, MCB DB

For 16 way, Double door SPN, MCB DB

12" (300 MM) Exhaust Fan

15" (380 MM) Exhaust Fan

WATER SUPPLY & SANITARY WORK

Providing and fixing N.P./C.P. brass/PVC porcelain shower rose of 15mm inlet etc. all complete as per specification and direction of Engineer-in-Charge

125 mm dia C.P. shower

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'P' trap 15 liters C.l. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C. brackets 32mm alkathene/PV.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I.body brass spindle stop cock of wt. not less than 50 gms, 15mm connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.

580 mm long

With 10 lit. low level PVC cistern

Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with 'p' trap of parry/hindustan or any other approved I.S.S. make including supplying and fixing 15 liters C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.l. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipes 45cm. long with brass coupling at both ends and white/black plastic solid state seal lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I.

With "P" trap

10 liters low level P.V.C. cistern

Providing and fixing wash basin with C.I. brackets, 15 imm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.

Mirrors of 6 mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3 mm ply wood board and C.P. hinges to fix with mirror.

600mm x 450mm size

Special type C.P. Bath room fittings for V.I.P Buildings (JAL, Jaguar, Marc or Equivalent make)(ISI marked)

Towel rail 24''

Glass shelf 22"

Providing and fixing Stainless Steel A ISI 304 (18/8) 1 kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:

Kitchen sink with drain board

510x1040 mm bowl depth 250 mm

Providing and fixing male ended 15 mm dia brass bib cock of approved quality (Wt. not less than 350 gms.)with extra socket all complete as per specification and direction of Engineer-in-charge.

Providing and fixing Gun Metal full way valve of approved quality all complete, as per specification and direction of Engineer- in-charge.

25mm dia and weight not less than 500gms.

32mm dia and weight not less than 700gms.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe

32 mm dia

40 mm dia

Providing and fixing terminal guard 100 mm dia Sand cast iron S&S as per IS - 1729

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

15mm nominal bore

Cutting chhajja or corince for laying G.I. pipe and restoring the same with R.C.C. (1:2:4) brick work in cement mortor (1:4) and cement plaster (1:4) as per specification and direction of Engineer-in-charge.

Making holes in walls for laying G.I. pipes and restoring the same after pipe laying as per specification and direction of E/l.

125 mm thick wall

250 mm thick wall

Providing and placing on terrace (at all floor levels) Polyethylene water storage tank with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

15 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mmn nominal outer dia Pipes

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet

Sand cast iron S&S as per IS: 3989

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

100x100 mm size P type

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to 1S: 5382, leaving 10 mm gap for thermal expansion (1) Single socketed pipes.

110mm (vertical Stack)

110mm (Horizontal Connection )

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion

Coupler

Single tee without door

110 mm bend

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing square mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

100x100 mm Size P type

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

HIGH YIELD DRILLED TUBE WELL

HYDT : Cost of drilling 200mmX165mmX125 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site.

(a) 0.00m Up to 50.00m depth below G.L. In Rural Areas

(b) Above 50.00 m depth. In Rural Areas

Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job.

Supplying all materials, labour, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job.

Supplying materials and labours for constructing bore well chamber of 75B designation brick masonry chamber 600mmx450mm and 750mm deep internal dimension having 250mm thickness in cement mortar 1:6 including 12mm cement plaster 1:6 with 600mmx475mm RCC cover with earth work in excavation and 75mm thick PCC(1:3:6) in foundation and refilling all complete as per specification and direction of E/I (Annexure I Attached)

SUBMERSIBLE PUMP SETS INCLUDING PROTECTION CHAMBER

Supplying submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V÷10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump.

Submersible Pump set 100 mm dia (with Polypropylene/ Noryl Impeller) up to 20 stages

Starter D.O.L. starter with SS Enclouser with 380/415 Volt Coil

Cable 35 Sq.mm, 3.5 core

PAVED PATHWAY

Construction of Embankment with Material obtained from Borrow pits. Construction of embankment with Approved Material obtained from borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site , spreading , grading to rewuired slope and compacting to meet requirement of Table 300 -2

Granular Sub base with well graded material - By Mix in Place Method : Construction of granular Sub Base by Providing close graded material mixing in a mechanical mix plant at OMC ,Carriage of mixed Material to work site, spreading in uniform layers with motor graderon prepared surface and compacting with vibratory power roller to achieve the desired density ,complete as per technical specification Clause 401 . (i) For Grading I Materials

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

UG SUMP FOR WATER SUPPLY & FIRE RISERVE

Designing (aestheticaly) , and Constructing R.C.C Ground Service Reservoirs / RCC sumps in M-300 mix. Of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab/ or dome, 20mm thick cement plaster with water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, over flow and bye-pass arrangement consisting of C.I./ M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder inside and outside, C.I. Manhole frame and cover, at top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coat of cement paint to all expose surface of stucture including

roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specification

Anti- termite treatment shall be given for under ground portion of the structure

The Designing shall be in accordance with relevant I.S. specification (I.S.456/2000,I.S. 875-1987, I.S. 3370--1965 or revised)

only M.S. bars grade I conforming to I.S. 432part-I or high yield strength deformed bars conforming to I.S. 1786 or I.S. 1139 shall be used Grade -II M.S. bars shall not be used.

Entire structure shall be in M-300 only.

The scope of pipe assembly work shall be upto 5 meter beyond out side face of the wall, cost of pipes valves and specials is not included in the rate but labour cost of laying and jointing is included.

G.S.R. / Sump above 15 lakh litres capacity shall be in two compartment.

The job includes designing the structure for up lift pressure and dewatering if required during entire execution and disposal of surplus excavated stuff within lead of 50 metres as directed by E/I. If up lifts considered in design, then these rates shall be increased by 7.5%.

G.S.R. outlets shall be with the bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. Sump well includes cost of suction pit required at bottom.

For pipe diameters upto 300 mm only CI pipes and CI specials shall be used. For pipe diameters above 300mm, M.S. pipes and specials minimum 10mm thick shall be used with proper anti corrosive epoxy treatment from inside and outside.

Cost of pump house is not included in these rates.

Above rates are applicable for seismic Zones 2,3 and 4

75%part rate shall be payable for reinforced concrete and plastering items of containers of G.S.R.s and sumps till satisfactory hydraulic testing for water tightness is given and till that work shall be treated as incomplete.

Cost of 50000 Litre Capacity

EXTERNAL WATER SUPPLY

Providing and fixing G.I pipe complete with G.I fittings including trenching and refilling etc.

50 mm dia nominal bore

Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed ended)

50 mm nominal bore

Painting GI pipes and fitting with two coats of anti corrosive bitumastic paints of approved quality.

50 mm nominal bore

Providing and filling sand of grading zone V or coarser grade allround the GI Pipe in external work.

50 mm nominal bore

Providing and fixing G.I union in G.I Pipe including cutting and threading the pipe and making long screws etc complete (new work)

50 mm nominal bore

Supplying tools and making connection of new G.I. distripution branch 15 mm to 50 mm dia with existing G.I. main by providing and fixing G.I. Tee including cutting of pipe at two places and threading their ends, providing long screw and one G.I. nipple, all complete as per specification and direction of E/I

32 mm dia

Supplying material and labour for construction of 600x600x900 mm stop cock chamber of brick masonary with 125 mm thick work of designation 75 B in cement mortar (1:6) with 12 mm thick cemnent plaster in CM (1:6) on in side only having 50 mm thick RCC cover heaving 12 mm dia lifting rings, 2 Nos . stop cock will rest over 80 mm thick PCC (1:3:6) over one brick flat rolling, including cost of earth work , all complete job as per approved design, specification and direction of E-in-C.

Supplying submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V÷10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump.

Submersible Pump set 100 mm dia (with Polypropylene/ Noryl Impeller) up to 20 stages

Starter D.O.L. starter with SS Enclouser with 380/415 Volt Coil

Cable 35 Sq.mm, 3.5 core

Girls Hostel Fire Fighting Works

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)

Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS:1520

Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.

M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.

Suitable cement concrete foundation duly plastered and with anti vibration pads.

900 lpm, Head : 35 meter

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coal tar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.

100 mm dia

80 mm dia

Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

80 mm Dia

100 mm Dia

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal /Stainless Steel cap and chain as required.

Single headed Gun Metal

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required.

100 mm Dia

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required.

100 mm Dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required.

100 mm Dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

100 mm Dia

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required.

Gun Metal

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.

20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585

20 mm nominal internal dia gun metal globe valve & nozzle.

Drum and brackets for fixing the equipment on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

30 Meter

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required.

Gun Metal

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as required for suitable dia MS pipe connection conforming to IS 904 as required.

2 way-100 mm dia M.S. Pipe

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Constructing brick masonry chamber 900 x 900 x 1000 mm inside with F.P.S. brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice Valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design. (DSR Civil-2023)

At Ground floor with FBI Sluice valve

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank. (Rs 11.00/Lt) (DSR Civil-2023)

25000 litres capacity

Supply and laying of ISI marked aluminium conductor PVC / XLPE insulated armoured, served, sheathed cable 1100 volts grade on wall surface clamped with 1 mm saddle of suitable size complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

16 sqmm 4 core

Supplying, installing, testing and commissioning of intelligent addressable sounder complete as required.

Supplying, installing, testing and commissioning of addressable manual call point complete as required.

Supplying, installing, testing and commissioning of addressable horn cum strobe complete as required.

Supplying, installing, testing and commissioning of fire fighter telephone handset complete as required.

Supplying, installing, testing and commissioning of main control and indicating panel, made out of 16 SWG MS sheet to accommodate following items duly powder coated in approved colour with louvers for ventilations, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system, including connections, interconnections etc complete as required.

250 watt amplifier racks suitable for operation on 230 V AC / 24 V DC supply conforming to IEC -268-3 complete with all accessories as required – 2 Nos (1 working and 1 standby)

Talk back master station LED PTT (Press to Talk) push button for operation on 230 V AC / 24 V DC supply conforming to IEC -268-3 simplex mode of operation / communication suitable for 20 Nos talk back unit – 1 set.

Amplifier change over switch for interchanging amplifier – 1 No.

Gooseneck microphone with stand and ON/OFF switch – 1 No

Main ON/OFF switch fuse indication lamps, DC and AC voltmeter & ammeters, terminal blocks etc complete as required – 1 set

Battery charger trickle cum boost to take complete load of fire alarm Public Address System complete with all accessories including providing and fixing of 2 nos 12 volts 60 AH each sealed maintenance free batteries – 1 set

10-Zone panel for fire alarm system

Providing and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required :

Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/ recessed steel / PVC conduit as required.

2 x 1.5 Sqmm

PASSENGER LIFT

Passenger Lift 2 Nos & 5 Stop (8 Persons, Speed 1m/sec)

NON- SCHEDULED ITEMS

GIRLS HOSTEL FURNITURE

Metal Single bed (1800 x 900 )of Powder-coated for a smooth, rust-resistant surface.

Modular Steel Table (900 x 600 ) with Particle Board Table Top and M.S. Metal Frame having one side storage Drawer .

Chair Without Armrest with of MS Powder Coated, Leatherette Material of Chair Back

Ofiice Table: Modular Table with Particle Board Table Top and Wooden/Engineered Wood frame , Size- 900 x 600 with Lockable drawers

Ofiice Revolving Chair with Knee tilt mechanism ,Designed with 360 degree-revolving type made from hot pressed plywood and moulded PU

Visitor chair with armrest having Mild steel Seat Leatherette ,Backrest fitted with seat and back

Three seater Sofa: TUBULAR STEEL SOFA SET of Thick Chrome Plated Aluminium sheet of minimum 6 mm thick Material Seat cover leather cloth / LEATHERITE Material and Side Frame of MS ERW Tube Of Diameter 31.8 Mm x 2 mm Thick

Drinking Water Cooler having SS Storage tank and GI Seat Body Type Water Cooler having 120 LPH Cooling capacity.

Water Purifier :Reverse Osmosis based Point of Use Water Treatment System for Drinking Purposes as per IS 16240 Countertop/Wall Mount 20 and above ABS/PP Food Grade, capacity 20 LPH

Dinning Table with 6 Chair :Stainless Steel Rectangular Dining Table Size 1830mm x 915mm , SS framed dining chair with seat and back

Supply & erection of ISI marked portable fire extinguishers, wall mounted type, wall brackets complete in all respect as per standard item with all accessories, delivery hose & nozzle whereever required, including fixing on walls as per the directions of Engineer-in-charge.

ABC Powder type 6 kg. capacity (IS:15683 & TAC Approved)

CO2 gas type. 4.5 kg. Capacity (IS:2878 & TAC Approved)

Providing & fixing neoprene rubber single arch expansion joint (anti vibration bellow) as per manufacturers specifications. Tested to a pressure of 20 Kg/Cm2 including all necessary fittings complete as required.

100 mm dia.

Providing & fixing 100 mm dia dial pressure gauge complete in all respects.

Providing & fixing standard carbon steel fireman axe with rubber insulated handle tested to 20000 Volts.

Providing and fixing standard fire hose cabinet door frame (1000 / 1200 mm x 2000 mm ) suitable to fit in the duct made of not less than 16 SWG MS sheet having full fronted glass hinged door (5 mm thick clear glass) including necessary locking arrangement with handle as required as per drawings, including brackets for mounting accessories, painting (one coat primer and two coats of fire red colour). The door shall be fixed in the masonry wall or as required. The words "FIRE HOSE" to be painted on the box.

Providing and fixing of self illuminated / auto glow "EXIT" signs printed on photoluminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site.

Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler),

65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main (M.J.P)

Supply and intallation of monoblock Centifugal pump 2.2KW/3HP . Pump shall be suitable for various dilivery head and discharge with stainless steel pump shaft and poly proplene /noryn impeller. Motar suitable for working on 415V +-10% , 3 Ph , 50Hz , AC supply with cable gaurd , thrust carbon / fiber bearing to withstand entire hydraulic thrust , water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with the pump.

Supplying & filling Jhama bricks boulders all complete.

INTERNAL ELECTRICAL FIXTURE

Incoming : 200 Amp.

Outgoing : 63 Amp TPN

Cat. B. Cubicle Type

Add GST 18 %

Add Labour cess 1%

VIJAY PRAKASH (BID ID -688856)

M/S Sharda Enterprises (BID ID -690359)

M/S Ram Pravesh Singh (BID ID -690774)

M/S NAVJEEVAN CONSTRUCTION (BID ID -688065)

Bharat Drilling and Foundation Treatment Pvt Ltd (BID ID -689635)