9. SUMERPUR - RAMPUR MANIKAPUR SAMPARK MARG SE MOHKAMPUR SAMPARK MARG TAK LEPAN NAVINIKARAN KARYA

Clearing & Grubbing Road Land Including Uprooting Wild Vegetation,Grass,Bushes,Shrubs,Saplings and Trees of Girth upto 300 MM Removal of Stumps of Such Trees cut Earlier and disposal of Unserviceable Materials and Stacking of Serviceable Material to be used or Auctioned upto a Lead of 1000 M Including Removal and Disposal of Top Organic Soil not Exceeding 150 MM in thickness as Per Technical Specification Clause 201

Providing, laying, spreading and compacting stone aggregates of 22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming,Stone Screening Material to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Brick Edging/Soling with Straight Over Burnt Brick's (Class-275) Laid on Edge on both side of road including all labour T&P.as per technical specification Clause-412

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.7 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with V.G-10 Bitumen using distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with air compressor as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-10 bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508. (By Mechnical Means)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C, as per Technical Specification Clause 510. (By Mechnical Means)

Construction of Embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Laying of Hume Pipe (NP-3) 350mm

S/F Of Sign Board

Please Enable Macros to View BoQ information