Loading
Loading…
Loading…
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
10 Jul 2026, 6:00 pm
Similar tender results from the same govt authority in the past 3 years.
HQ CWE Meerut
29J The Mall Road Meerut Cantt Uttar Pradesh 250001
REPAIR/MAINT OF CENTRAL AC PLANTS, AIR COOLING SYSTEM OF 510 ABW, CMVL AND DCN DABATHWA OF AGE E/M (WS) UNDER GE (U) MEERUT CANTT
2026_MES_772957_1
94358/MRT/2026-27/E8
Open Tender
Civil Works
180 days
MEERUT CANTT
Please refer tender documents.
7 documents required · 7 mandatory
₹500
GE (U) Meerut
₹80,000
Yes
18 Jun 2026
18 Jun 2026
17 Jul 2026
18 Jun 2026
10 Jul 2026
3 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply & fix in repair MCCB 3P 100 Amps, lcu=16KA, 415 volts, 50hz, AC, with Adjustable Thermal release (0.7 to 1.0 In), fixed magnetic type suitable release for 10.0 In duly connected with copper spreader links and proper size lugs, nuts, bolts and washers for proper connections complete all as specified and directed. | 5 | Each | - | - |
| 2 | All as per item No 1.00 above but 4P 250 Amps, 36KA capacity complete all as specified and directed. | 1 | Each | - | - |
| 3 | S & F in repairs Miniature circuit breakers TPN, 16 Amps to 32 Amps , 415 Volts ,50 hz, 10 KA, 'C' curve rating complete all as specified and directed.
Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers & rates are included in unit rate of each Miniature circuit breakers of any rating quoted by the contractor. | 6 | Each | - | - |
| 4 | S & F in repairs Miniature circuit breakers TPN , 40 Amps to 100 Amps , 415 Volts ,50 hz, 10 KA, 'C' curve rating complete all as specified and directed.
Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers & rates are included in unit rate of each Miniature circuit breakers of any rating quoted by the contractor. | 5 | Each | - | - |
| 5 | M&L for dismantling existing Monoblock pump with motor 2 HP to 10 HP, 3 Phase, 415 Volts, servicing of pump and motor by opening of pump, machining of pump shaft; renewal of gaskets, gland packing, Gun metal bushes; bearings, greasing and refixing the same complete all as specified .
Note:- Ball bearing renewed and motor winding shall only be measured and paid separately. | 12 | Each Job | - | - |
| 6Dismantling/ taking down burnt squirrel Cage Induction Motor, winding of following capacity, 1-phase/ 3 Phase, 415V, 1450 RPM of any make from its base and transporting the motor to the Contractor's workshop and back, refixing the motor at site after carrying out the following repairs/ renewals complete all as specified :- (i) opening the side covers and removing the rotor and cutting/ removing the burnt coils / winding from stator. (ii) Cleaning the slots carefully. (iii) Rewinding the stator using super enamelled copper winding wire with same size, number of coils,number of turms/ coils as per data acquired from the old burnt motor, including varnishing two coats, drying and reassembling the electric motor at site. (iv) Testing the coils for there continuity and no current passing through the stator core. (v) Dynamic testing of the rotor and alignment of the main shaft and ensure that no imbalance vibtrations. (vi) Re-assembling the rotor and connecting the end terminals to the terminal plate of the motor, closing the ends with side covers. (vii) Testing and commissioing the electric motor connecting to the electric supply to its full load by connecting the compressor. (viii) Renewal of Bolts, nuts and washers. Note :- (i) Parts renewed i.e Ball bearing shall be measured and paid separately. However filling of grease and oiling extra shall be deemed to be included in Unit rates quoted by the contractor. (ii) The weight of copper coil provided before varnishing shall be taken for the purpose of payment. | |||||
| 6.01 | 1 HP to 2.5 HP | 4 | Each Job | - | - |
| 6.02 | 3 HP to 5 HP | 6 | Each Job | - | - |
| 6.03 | 7.5 HP to 10 HP | 2 | Each Job | - | - |
| 7 | Supply and fix in repair of ball bearing for electric induction motor of 3 HP to 10 HP capacity as per existing shape and size complete all as specified and directed. | 10 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.26 MB
TD1.pdf
Tender Documents • 0.38 MB
TD2.pdf
Tender Documents • 0.22 MB
TD3.pdf
Tender Documents • 0.24 MB
TD4.pdf
Tender Documents • 0.66 MB
BOQ_865545.xls
BOQ • 6.98 MB
Download all tender documents and submit your bid