SPECIAL REPAIR OF 02 BLOCK 08 DUs IN ANUJ VIHAR UNDER GE SOUTH DELHI CANTT-10

Cutting of shrubs/bushes and small plants/vegetation including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified.

M & L for Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar

M & L for Demolition of mud in roof, any thickness, including plastering and leeping upto two storey bldg incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or as directed complete all as directed by Engr in charge and specified.

M&L for Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) avg 40mm thick as in roof pedding , finished even and smooth without using extra cement ,including cleaning the concrete surface by steel wire brushes, up to three stories bldgs, complete. (Note :- M-sand should be used)

M&L for screed bedding 15 mm thick plaster in CM 1:4 on roof finished even and fair using extra cement on roof with water proofing compound up to four stories bldgs WPC shall be measured and paid seperately. (Note :- M-sand should be used)

Supply only water proofing compound.(ISI Marked.Sika or equivalent).

M&L for applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on top of roof surface in multiple coats @2 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and other coats needs to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete all as specified and as directed. When the 2nd coat is wet, the Smartcare EPDM tape (at corners and edges)shall be inserted between second and third coat to secure corners & edges, let the material ooze out from the tapes corner. Same treatment of Smartcare Dampproof shall be continued to the parapet walls to better envelope the whole area. The coating shall be terminated carefully to the other side of the parapet wall complete all as specified and as directed.

S & F for Heat Resistant Terrace ceramic cool Tiles (300 mm x 300 mm x 10 mm minimum) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner.

M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete as directed.

Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons, skirting etc laid bedded and pointed in any morter complete all as specified and directed

M & L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps, jambs, window cills, pillars, cooking platforms, skirtings with necessary hole for gas pipe where ever required and likes on cement mortar bedding of 20mm thick in CM 1:6 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for Machine cut 20-22 mm thick Kota stone slab flooring as in treads of staircase over cement screed base 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

M & L for Kota stone slab 20-22 mm thick in riser of steps, skirting, dado and pillar, laid over cement screed of 10mm in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

M & L for Glazed Ceramic coloured tiles in vertical surface 600X300X7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick backing coat of cement mortar (1:3), with adhesive type - II (wall) thickness as per manufacturing instructions complete all as specified and as directed. complete all as specified and directed

M&L for glazed Vitrified Ceramic tiles 600 x 600 mm double charged any shade, 9-10 mm thick (square/ rectangular) polished, as in floors/skirting set and jointed in type-II (Floor) adhesive and pointed in white or colour complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.

M&L skirting backing coat 10 mm thick (cement plaster 1:4) on fair faces of brick work or concrete surfaces all as directed

M&L Non Skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in type -II adhesive (floor) and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed.

S & F Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, coloured, with integral foot rests, fixed in repairs including provision of lime concrete bedding complete.Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete.

S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, syphonic action type, white with inlet ball valve float and handle complete all as specified.

S & F in repair Vitreous china wash basin with pedestal white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete.

S&F in repairs Chromium plated Pillar tap cast copper alloy with capstan heads fency type screwed down high pressure screwed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm bib tap, brass chromium plated fancy type (quarter turn), long body screwed down including necessary extention piece complete.

S&F in repair 15 mm dia brass chromium plated angle valve fancy type (quarter turn), screwed at ends including necessary extention piece and fixed complete.

S & F in repairs one piece EWCs with seat cover and twin flush cruiser snow white colour size 710x390x790mm Strap including all fitting. complete all as specified. (Make :- Jaquar, CERA, Kohler)

S & F in repairs table top wash basin of size 610x380x110mm catmax snow white colour including all fittings all as specified and as directed. (Make :- Jaquar, CERA, Kohler)

S&F waste coupling with ceramic pop-up full thread 32mm for WHB (Make :- Jaquar, CERA, Kohler)

S&Fin repairs bottle trap of size 228 mm for WHB (Make :- Jaquar, CERA, Kohler)

S&F CP in repairs pillar cock mixer 2-in-1 long body single handle for counter top wash basin complete with all fittings and as specified . (Make :- Jaquar, CERA, Kohler)

S&F CP wall mixer 3-in-1 with wall flange complete with all fittings and as specified . (Make- (Make :- Jaquar, CERA, Kohler)

S&F 15 mm CP Bib cock 2 way with wall flange and single knobs complete with all fittings and as specified . (Make :- Jaquar, CERA, Kohler)

S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified . (Make :- Jaquar, CERA, Kohler)

S&F in repairs Corner glass shelf 300x300 mm with 'D' / F type brackets complete all as specified . (Make :- Jaquar, CERA, Kohler)

S & F in repairs Soap disk. (Make :- Jaquar, CERA, Kohler)

S & F Liquid Soap dispenser. (Make :- Jaquar, CERA, Kohler)

S & F in repairs toilet paper holder. (Make :- Jaquar, CERA, Kohler)

S&F in repairs SS Towel rack 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Make :- Jaquar, CERA, Kohler)

S&F in repairs SS Towel rail 450mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Make :- Jaquar, CERA, Kohler)

S&F in repairs elegent mirror PVC cabinet without towel rail of size 422 x 622 mm all as specified.

S&F in repairs chromium plated brass stop cock fancy type (concealed type)screwed both ends high pressure for 15mm bore size iron pipe or ferrule complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose of size 150 mm with 450mm long arms including fixing to steel pipe.

S&F in repairs Good quality Connecton pipe (PVC) complete all as specified.

S & F in repairs Sinks with drainage board made of 1mm thick stainless steel for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe 32 mm bore, 65 cm long complete.

S&F in repairs Brass chromium plated mode 2 in 1 sink mixture 15mm dia including necessary fittings model Quarter half turn (SOLO) of as complete all as specified & directed.

S & F in repairs Sinks without drainage board made of 1 mm thick stainless steel for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe, bowl size 460mm x 410mm x 160mm, including PVC waste pipe 32 mm bore, 65 cm long complete.

S&F in repairs stainless steel plate rack overall size (31X30X10 inch) fixed with steel screws with wooden gutties and thickness should not be less than 1mm complete all as specified and as directed. (Make :- Prayag Cat No.P-346 ).

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing. complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing. complete all as specified and as directed.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth.

S&F 20mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 25mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 40 mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings for WHB on walls/ceiling or laying in floors complete all as specified.

S&F 20mm outer dia CPVC Union complete all as specified and directed.

S&F 25mm outer dia CPVC Union complete all as specified and directed.

S&F 40mm outer dia CPVC Union complete all as specified and directed.

S&F 40mm outer dia CPVC Tank Adaptor complete all as specified and directed.

S&F 25mm outer dia CPVC Tank Adaptor complete all as specified and directed.

S&F 20mm outer dia CPVC Tank Adaptor complete all as specified and directed.

S&F 25mm outer dia CPVC ball valve/gate valve complete all as specified and directed

S&F 20mm outer dia CPVC ball valve/gate valve complete all as specified and directed

S&F 20mm outer dia CPVC Brass Elbow complete all as specified and directed.

S&F 20mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed

S&F 25mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed

S&F 20mm outer dia CPVC Brass Tee complete all as specified and directed

S&F Brass reducer 40mm x 25mm outer dia CPVC complete all as specified and directed

M&L for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing unserviceable overhead tank of any description including fitting and fixtures complete all as specified.

M&L for rotational moulded polyethylene water storage tanks white colour 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing unserviceable overhead tank of any description including fitting and fixtures complete all as specified.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 m in depth for manholes & sewage lines and getting out in soft/loose soil.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm.

Removal of excavated surplus soil to a distance not exc 50 metre at a level not exc 1.5m above or below the starting point. complete all as specified and directed.

S & F DWCPE 170mm dia pipe, SN8 all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 100mm bore including packing under and haunching against sides of pipes after they are laid and tested. complete all as specified and directed.

Demolition and breaking up rain water pipes (CI,AC etc) set in any cement mortar of any diameter incl bends.

S/F PVC (SWR) 110mm pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears including clamp as rqd ,110mm bore complete.

S/F PVC (SWR) 75mm pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete.

S&F for PVC (SWR) bends any radius, 110 mm bore complete.

S&F for PVC (SWR) bends any radius, 75 mm bore complete.

S&F for 110 PVC (SWR) Tee with door plate complete all as specified and as directed.

S&F for 75 mm PVC (SWR) Tee with door plate complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in solvent cement concrete complete all as specified and as directed.

Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc incl cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories complete.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamp, of 110 mm dia complete all as specified and directed.

S&F for PVC (SWR) bends any radius 110mm dia bore

Demolition of brick work built in cement or cement lime mortar complete.

M&L brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified.

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete.

Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x125 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x100 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick with edge lipping tape allaround 0.8mm to 1.00mm thick, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.

Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with edge lipping tape allaround 0.8mm to 1.00mm thick, consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick with edge lipping tape allaround 0.8mm to 1.00mm thick, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 45 x 70 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding Door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and direct. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F 5mm thick toughned glassfixed with uPVC doos and windows including all necessary fittings. Complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tied tacks or galvanised wire stapple etc. to uPVC doors and windows complete all as specified and as directed.

Taking down steel windows complete of any description and shape and size and making good altop, bottom and sides of window openiong with cement mortar (1:4|) complete all as specified and as directed.

S&F Aluminium windows with outer frame 40mmx114mm with 1.3mm thickness ,corner 45degre cut & aluminum welded center mulion size 40mmx65mm also welded, sutter size 40mmx60mm 1.3 thickness 45degree cut mechinacly joint with 6mm alenkey bolt clamp , 12mm ss 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safty grill welded at both ends with 6mm ss 202 grade round bar, 5mm clear glass both side epdm rubber gasket metal body hand lever type single point lock ss friction stay type inges 2 nos per sutter , 40x18mm 45 degree cut & welded mosquito net sutter with aluminum 24 gaug mosquito net ss 75mm long inges & pvc megnat , full system powder coating with pure polister coat of any shape,shade and size as approved by GE and intalling with SS screw roll plug and filled with silicone complete all as specified and as directed. Note :- (i) For installation of window AC/desert cooler the provn of window glass shutter, wire mesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per direction of Engr-in Charge. (ii) Ref Drwg No. CEDZ/TD-316 dt 07/11/2024

S & F for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as spd.

S&F 100mm size butt hinges stainless steel of AISI 304 complete all as specified and directed.

S&F 300 mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clipss of sheet, cast or extruded sections and fixing bolts and fixed etc complete all as specified and directed.

S&F stainless steel of AISI 304 grade barrel tower bolt 200 mm long, extruded section, etc complete all as specified and directed.

S&F stainless steel of AISI 304 grade handle of size 200mm size long etc. complete all as specified and directed.

S&F brass magic eye for panelled/flush shutter 35mm thick complete all as specified and directed.

S & F Floor door stopper (double leg) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 60mm complete.

Dismantling boarding, any description, fixed in any position with nails .

S&F Factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets.

S&F Factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets.

S&F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed.

S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws.

S&F SS tower bolt size 125mm complete.

S&F 100 mm long, stainless steel of AISI 304 grade, hasp and staple, safty type, incl bolt to hinge plate and fixed with screws etc. complete all as specified and directed.

S&F, 25mm dia SS curtain rods fency type, including SS bracket and SS side bulb decorative type complete for doors and windows as required complete all as specified (Make: As per sample)

Distmantling of ceiling boards (fibre, pulp, insulation etc.) or insulation bords/ slab/blankets, any thicness, including cover fillets complete all as specified and directed.

S&F anodised aluminium snap grid frame (with minimum 15 micron uniform anodic coating) size of 605mm x 605mm consisting of Tee/Angle section, size 40 x 40 x 2mm as approved make confirming to IS-733 in frame of false ceiling including aluminium cleat with necessary CP brass/stainless steel shunk screws. Aluminium perimeter angles fixed to wall/wooden frame at centre to centre and fixing frames to level adjusting anchors 8mm dia GI wire with hook in Tee members at 1.5m centre to centre fixed to steel trussed roof complete all as specified and as directed.

M&L 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to aluminium frame work with screw in ceiling .

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed.

Steel work in tublar trusses, posts raffers, purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS - 1161- 1979 gde st -240.

Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screw all as specified and as directed.

M&L preparing of new steel surfaces of any description not otherwise described, over 10 cm width or girth & applying Two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified

M&L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering

M&L for glosy finished coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade

Removing excavated soils exc. 500m and and n. ecx 500 mtr depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

Demolition of reinforcement Concrete of any description and in any position not otherwise specifically provided for

M&L for Reinforced cement concrete type B-1 (1:2:4) using 20 mm graded aggregates in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, parapets, shelves, water staging etc and (necessary form work is included with the item rate upto four sotrey bldgs)

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified

M&L for 75mm thick PCC 1:4:8 type D2- using 40mm graded stone aggregate as in sub base etc. complete all as directed

M&L cement concrete type B1 1:2:4 (20mm graded aggregate) for plinth protection etc.complete all as specified and directed.

M&L for Rubber moulded colour glosy finish Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick , set , jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes in floors , path / hard standing etc with grey cement and pigment (Coloured Tiles) complete all as specified and as directed

M&L for outdoor tile parking tiles size 300 x 300 mm conforming to IS 15622:2017 including 20mm sreed bed all as specified and as directed.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

M&L for 15 mm thick cement plaster with self curing redimix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement).

M&L for 10 mm thick rendering internal with self curing ready mix plaster ( as manufacturr's instructions ) in patches on faces of bricks or concrete surfaces , finished even and smooth without without using extra cement ,complete all as specified and directed by Engr-in-Charge.

M&L 5 mm thick rendering on ceiling with ready self curing mix plaster ( as manufacturer's instructions ) in patches on faces of bricks or concrete surfaces , finished even and smooth without without using extra cement ,complete all as specified and directed by Engr-in-Charge.

M&L for cement plaster 15 mm thick in CM 1:6 on brick or concrete surfaces finished even smooth without extra cement mixed with by adding permeability reducing polymer @ 250 gms/sqm (6%) by weight of cementious content at time fixing with water as per manufacturer's recommmended incl all levilling the surface, curing etc. complete all as specified. Note :- Rates for water proofing compund/polymer deemed to be in the above rates.

M&L for providing and applying a bond coat of latex : water : cement - 1:4:6 consumption @ 100 gms/Sqm on the brick wall surface by brush as per manufacturer's recommendations incl curing complete all as specified.

M&L for applying two coats of oil bound distemper on new wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose langth of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as secified and directed. Note: Sanding of surface to be done by mechanical sander with 150 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer including removal/ sifting of firniture and cleaninig of door,windows, floor and furnitures etc.

M&L Applying two coats on new surfaces wall/ceiling with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr over a coat of primer after cleaning and removing dirt dust oil grease smog efflorescence stain, thoroughly brushing the surface and removal of existing paint flakes, necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work.

M&L for complete removal of existing loose treatment by scraping with mechanical wall/ceiling by vacuum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 ich/ 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller. Complete all as specified and as directed.

M&L for applying two coats of waterproof putty upto 1-2 mm to get even or smooth surface by mechanical means as per manufacturer specification all as specified and as directed.

M&L for applying two coats of oil bound distemper on wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose langth of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as secified and directed. Note: Sanding of surface to be done by mechanical sander with 150 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer including removal/ sifting of firniture and cleaninig of door,windows, floor and furnituresetc.

M&L Applying two coats on old surfaces wall/ceiling with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr after cleaning and removing dirt dust oil grease smog efflorescence stain, thoroughly brushing the surface and removal of existing paint flakes, to obtain an even surface ,necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying with one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying with one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

Rounding to edges of kota stone slabs on edge, such as in steps, Kitchen slab edgs and other similar situations.

Making holes on kitchen platform, facilitate to insert gas tubing in appropriate size and shape. Complete all as specified.

M&L ATT Along the external/enternal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

M&LTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors.

Providing conveyance for transportation of luggage incl packing (bubble wraps and cardboard required) and shifting & reinstallation of household items at new location like TV-01 No, AC-01/02 Nos (removal and reinstallation of windows/ split AC incl gas filling if required), Refrigerator -01 No, Washing Machine -01 No and Water purifier-01 No. Note: Transportation of two wheelers and four wheelers not included.

S & F Semi Modular Cabinet Kitchen accessories of Stainless Steel grade-304,6mm size rod thickness including :- (i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement all spd and directed

Supply, fabrication & installation of box-type modular kitchen cabinets (below/above counter) and cupboards(Almirah) up to 600 mm depth (or as per actual size at site) made of 18 mm thick HDHMR pre-laminated waterproof & termite resistant board for top, bottom, back, partitions, drawers, shelf etc. Shutters & exposed surfaces made of 18 mm thick HDHMR laminated with 1 mm thick acrylic high gloss sheet on one side and 0.8 mm balancing laminate on other side, factory pressed. Edges finished with PVC edge banding tape applied by edge bending machine etc including auto closing spring loaded hinges(hydraulic type), magnetic catchers, SS handles stainless, steel soft closing heavy type telescopic drawers channel etc complete all as per approved shop drawing and as directed. Note :- i) Fittings & fixtures shall be deemed to be included in rate quoted by the tenderer. ii) The measurement for payment shall be based on the superficial area of the modular kitchen cabinets.

Notes: (a) :The contractor will carry out complete cleaning of entire apartment through a specialised profeesional cleaning agency, including all rooms, kitchen, toilets/ bathrooms, balconies, utility areas, doors, windows, floors, walls, ceiling, tiles, sanitary fittings, kitchen fixtures, electrical fittings (dry cleaning), glass panes, grills, and removal of dust, stains, debris, cement/paint marks, grease and dirt, using suitable mechanised equipment, approved eco friendly chemicals, detergents, disinfectants and consumables, complete and handing over the apartment in neat , clean, hygenic and ready to occupy condition complete all as specified and directed by engineer in charge. No additional cost on this account will be paid to the contractor.

Taking down carefully aluminium/copper point wiring (light/fan/bell/socket /power) with complete fittings such as steel terminal boxes, switches, ceiling roses, pendents, regulators, sockets etc and removing the material including making good the distrubed surfaces of the wall flooring ceiling etc to match the existing surface all as specified and directed by Engr-in-Charge.

M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through existing concealed PVC conduit in wall and ceiling including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes factory made having min 1.2 mm thickness including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) .Make of Cable: Polycab/Gloster/KEI or equvalent Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete.

All as per item No 162 above but 5 Amp socket outlet on same board.

All as per item Srl item No.162 here in before, but for one three pin socket outlet 6 amps point controlled by one no, one way switch on independent board and through new concealed conduit complete.

All as Item No 162 above but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete.

All as per Srl No.162 above One light point controlled by 2 way switch with 1.5 Sqmm conductor.

M&L for concealed point wiring complete with stranded copper conductor 4 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit complete including 4 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for one socket outlet for modular AC Box on Independent board with cables 4.0 sqmm size for phase and neutral and 4 Sqmm for earthing complete. Make of Cable: Polycab/Gloster/KEI or equvalent. Note:- the rate is inclusive cutting /chasing and making good the disturbed surface with cm 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete

S&F switch modular type, 1 way 10A, 1module IP-20 white colour complete all as specified and directed by Engineer in Charge.

S&F Modular Shuttered Socket, 6A - 2/3 pin 2 module IP-20 white colour complete all as specified and directed by Engineer in Charge.

S&F switch modular type 1way 16A, 1module with indicator IP-20 white colour complete all as specified and directed by Engineer in Charge.

S&F Modular shuttered Socket 6/16A - 2/3 pin combined IP-20 white colour complete all as specified and directed by Engineer in Charge.

S&F Modular Bell push 10A 1 Module with nidicator IP-20 white colour complete all as specified and directed by Engineer in Charge.

S & F Switch Modular type switch, 10 A 2- way 1 Module IP-20 white colour complete all as specified and directed by Engineer in Charge.

S & F in replacement ,Decorative wall light mounting suitable for LED Lamp upto 15 Watt complete with all connections all as specified and directed.

S&F in replacement Surface mounting round shaped LED downlighter with durable housing with aluminium pressure die- cast with heat heat dissipating fins diffuser to give glare free light 12 Watt LED 6000K/6500K lamp type from ceiling of stairs/common areas, complete all as directed.

S&F in replacement Wall mounted LED Integrated Batten 20 Watt - 4Ft White,CRI 80, aluminium housing, 120 Lumens per watt,6500K(cool White)4000 K (Natural White), Pf < 0.90 indoor LED battern IP-40 complete all as specified and directed by Engr in Charge.

S&F in replacement Wall mounted LED Integrated Batten 10 Watt - 2Ft White,CRI 80, aluminium housing, 120 Lumens per watt,6500K(cool White)4000 K (Natural White), Pf < 0.90 indoor LED battern complete all as specified and directed by Engr in Charge.

S&F Modular AC Box with socket and MCB SP 20 Amp complete with Metal box , white colour plate and frame complete in replacement of sheet metal enclosures as per site requirement , complete all as specified and directed.

S&F LED bulb 12 Watt, CRI 80, Frosted glass, 3000k white 100 Lumens/watt Pf <0.90, Min 25000 Hr IP rating 20 complete all as specified and directed.

S&F of electric bell Ding Dong type AC, 230 volts single phase all as specified.

S&F ceiling rose surface Bakelite 65x25mm two to three terminals complete all as specified.

S&F in replacement LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE in replacement of old unsv bulk head fitting including all accessories connecting up twin core flexible copper conductor cable complete all as directed.

S&F in replacement of building security smart sence light fitting 45W LM80 certified LED, CCT 5700K excellent thermally managed pressure die cast aluminium compact LED Street light with sensor based and controling switch also including 40 mm dia of bracket duly fixed with clamps, nut, bolts & washers etc and all as specified and directed.

Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with remote control, Suitable cell for remote, Brush Less Direct Current (BLDC) Motor, Class of insulation : B, 3 Nos Blade, 30 cm long down road, 2 Nos canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 220 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and directed by Engr-in-Charge including taking down old ceiling fan and depositing to MES store yard.

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding motor and sweep 250 mm CMH 750-800 and connecting up with replacement of cable T/C flexible cable of size:- 1.50 Sqmm from ceiling rose / connection to fan and taking out fan and deposited to E/M store yard all as specified and directed.

M& L for opening of hole on existing window as suitable for exhaust fan of size 250 mm sweep and fixing of frame, nut bolts with 4" Anchor fastner of suitable size and making good to disturbed surface and all as specified and directed by Engr in Charge . Note - The rate are inclusive in respect of under this item as above hole opening civil work with MS fastner bolt of 8mm dia and 100mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5 mm thick (min) to hold exhaust fan.

Taking Down of Geyser any type any size including disconnection of electrical connection and water connection and keeping in safe coustody and deposit it to MES store Yard.

Supply & fixing of water storage heater Sqaure type, 5 star, remote operation, Anti bacterial sterilization, Digital temperature settings, Performance based Heat Tech, Temperature Sensor, Dry Heating Protection, Glass lined enamel coated incoloy heating element , Feather touch buttons, Shock resistant injection moulded ABS body, waterproof technology, Tank design is suitable to withstand 8 bar pressure, PRCD, ECO function, Whirl Flow Technology, Error code display (Geyser) of capacity 25 litre ISI mark,AC, electric, 415 volt, complete , 3 core lead, including safety valve, including electric and water connection and making good to disturbed surface complete all as specified and directed. (Note : (i) Electric switch for geyser of 16 Amps switch & switch board shall be provided at near bathroom door and 16 Amp socket outlet shall be provided near the geyser and will be measured as 16 amps power wiring against item no.5

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-08 Way,with rubber gasket 240V complete as per site requirement and as directed by Engr-in charge.

S&F in replacement of sheet metal enclosures double door with rubber gasket for DBs when MCBs to be used SPN-12 Way, 240V complete as per site requirement and as directed by Engr-in charge.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-4 Way, 240V complete as per site requirement and as directed by Engr-in charge.

S&F in replacement of MCCB 4Pole .415 V. fixed type, 160 Amps with breaking capacity 36kA all as directed.

S&F in replacement MCB SPN 63 Amps 'B' series, breaking capacity 10 Ka, 'B' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. M

S&F in replacement MCB SPN 40 Amps 'B' series, breaking capacity 10 Ka, 'B' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc.

S&F for MCB SP 6 to 32 Amps 240 Volts, 10kA, `B' curve all as per site requirement and as directed

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to GI wire 4 mm as earthing lead by means of nut, bolts and check nuts and washers, GI light grade protection pipe 15 mm dia upto 7.5 M, GI watering pipe 20 mm dia medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No 5 of SSR Part I, including earth test point upto panel board, all as specified or indicated including testing on completion.

Taking down unserviceable sub main wiring twin core of any size complete and making good disturbed surface complete all as specified and directed.

M&L for Sub Main wiring using single run PVC FRLS grade Insulated unsheathed, multistrand copper conductor cable 2 runs of 10 Sqmm for phase and neutral and 1 run of 10 Sqmm for earth wire drawn through concealed PVC conduit wiring in wall not less than 25mm dia with all fittings like tees, bends, junction/ terminal boxes etc as per site requirement and all as directed by Engr-in-charge. (Note:- Phase should be of Red /Yellow/Blue, neutral should be of back and earthing wire should be of green colour. 2 runs of cable for phase/ neutral and 1 run for earth will be measured and paid as one unit length).

S&F wall mounted fully auto clean domestic type Electric chimney in size range from 60 cm to 90 cm hood for 2-3 gas burners of suction capacity 700-1200 m³/Hr with touch control, filterless chimny No need to clean filters, easy to clean oil collector tray , 100% copper wound motor, environment-friendly 1.5 W LED lamp, 5 years warranty on motor including all connecting accessories,fitting and fixtures all as specified and directed by engr-in -charge .Note:- work for fitting of chimney including hole of suitable size for outlet will be done by contractor without any extra cost.

Supply and fix wall mounted fan made of sturdy Engineering plastic complete voltage 230V, 50 Hz, Copper winding of sweep 400mm all as specified and directed by engr in charge.

Taking down and re-fixing single phase static energy meter in meter box of exixting LT Panel and including its connection complete including necessary connections of incoming and out going cables. as specified and directed by Engr-in-charge.

M&L for removing the old paint from the existing LT panel board cum existing bus bar panel using wire brush for removing old paint and painting with spray gun with two coats of primer and one coat of existing grey weather proof paint complete including internal wiring of LT Panel all as specified and directed. Note : Marking of danger notice board with skull and bones from the conductor and marking of qtr No on meter is deemed to be included in the rates quoted.

Supply and fixing of PVC conduit medium grade of size 15mm TV connection and Socket /Telephone socket complte all as specified and directed by engr in charge.

Supply and fixing TV Co-Axial Socket 1 module all as specified and directed by engr in charge.

Supply and fixing Telephone socket 1 module all as specified and directed by engr in charge.

Supply and fixing Flush metal box 1 module all as specified and directed by engr in charge.

Supply and fixing white cover plate with frame 1 module all as specified and directed by engr in charge.

Supply & fixing of water storage heater, 5 star rated with Marine grade glass line coating Tank Efficient long life copper heating element ,Adjustable Thermostat, Shock resistant amd rust proof engineering thermoplatic body, waterproof technology, Tank design is suitable to withstand 8 bar pressure (Geyser) of capacity 06 litre ISI mark, , AC, electric, 415 volt, complete , 3 core lead, including safety valve, including electric and water connection complete all as specified and directed by Engr in charge. (Note : (i) Electric switch & socket for geyser of 16 Amps shall be provided in the Kitchen near the geyser and will be measured as 16 amps power wiring against item no.5