Building Electrification and Associated works of Block 108D at INRP, BARC, Tarapur.

Amount

Supply, Installation, Testing and Commissioning of following configuration 415V, 3-phase, 4 wire, double door,with R Y B Phase indication and mcb position indication through glass front, IP-54, Prewired with HFFR copper wires, horizontal type, metallic Double Door, Phase Segregated three pole and neutral MCB Distribution Board fabricated out of 2 mm thick ,powder coated with RAL7035 shade , pre-galvanised G.I. sheet steel, suitable for surface mounting complete with appropriate rating of tinned copper bus bar (fork type), neutral bus bar, earth bar, din bar,brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes , neoprene gasket, etc as as per drawing, specifications & generally as per relevant IS & as per instructions of Engineer-in-charge.

MCB DB with Incomer of 16A, Isc=10kA, Type C, TPN MCB with 2-Pole, 16A, Isc=10kA, (100mA) RCBO for each phase and 12 nos. of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 32A, Isc=10kA, Type C, TPN MCB with 2-Pole, 32A, Isc=10kA, (100mA) RCBO for each phase and 18 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

Supply, Installation, Testing and Commissioning of following configuration 240V, 1-phase, 2 wire, with Phase and mcb position indication through glass front, Prewired with HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Pre Galvanised G. I sheet steel, powder coated with RAL7035 shade, suitable for surface mounting complete with appropriate rating of tinned copper bus bar/Cu Wire, neutral bus bar ,brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per tender technical specifications.

MCB DB with Incomer of 25A, Isc=10kA, Type C, DP MCB. 25A DP RCBO (100mA) and 6 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

Supply and Installation of the following Industrial/modular MCB and metal clad/polycarbonate plug sockets with suitable industrial plug tops ( 3-pin) along with surface mounted powder coated GI Box with suitable mounting arrangements on wall and 3 pin domestic plug sockets with suitable PVC Box, switch and plug tops as per Technical specifications.

1 nos. of 10A and 1 nos. of 20A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket along with pre- Galvanised powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements along with surface mounted powder coated 2mm thick GI Box with suitable mounting arrangements on wall as per technical specification.

Supply

Installation

1 no of 10A and 1 no of 20A, Single phase Modular Decorative Type Socket with Polycarbonate box, piano Switch for each Socket and heavy duty polycarbonate Face Plate, along with concealed/surface mounted enclosure, plug tops and suitable surface mounting arrangements as per technical specification.

Supply

Installation

Supply and surface conduiting of heavy duty rigid GI ERW conduit pipe of 25mm sizes along with all accessories such as inspection bends, junction box, socket, check nut, supply of fish wire etc. including making threads, removing burrs, connection of accessories, drawing of fish wire, cleating with heavy duty GI saddle or suit to site clamps on RCC wall, column, steel structure . as required under the instruction of Engineer in charge. 2mm thick powder coated GI surface type junction box with suitable mounting arrangements shall be provided.

Supply

Installation

Supply and laying of 14 SWG ETP grde bare solid copper conductor throughout along the conduit including fixing with ties and copper cleats, brazing etc as required.

Supply

Installation

Supply, Installation, Testing and Commissioning of LED light fittings with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, complete with light fitting accessories, including supply of fixing accessories, twin twisted tinned 1.5 sq. mm copper flexible cords for terminal connections, 16 SWG copper wire for earthing , flexible GI metallic conduit sleeves, PVC conduit bushes, cable lugs and testing and commissioning as per the specification of the following:

Decorative box type, LED Slim Batten (40mm x 46mm x 1127mm - W x H x L approx) with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs,with a nominal system lumen output of >2000 lumens and a minimum system efficacy of 110 lm/W.The luminaire should have a color temperature of @ 6500K and CRI>80. THD < 10% and PF > 0.95. The luminaire housing should made of Extruded Aluminium with extruded PC diffuser & should have anodised finish. Mounting shall be suitable for ceiling suspended. The total power consumption should not exceed 20W (including driver)

Supply

Installation, testing and commissioning

Industial box type, 4ft Functional with 2x18W LED replaceble type Tube with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, with a nominal system lumen output of 2350 lumens per LED tube. The luminaire should have a color temperature of 6500K and CRI>80. minimum 110 lm/w efficacy, THD < 10% and PF > 0.95. The batten luminaire housing should made of white powder coated CRCA sheet steel. The LED shall be mounted on extruded aluminium strip which acts as heat sink and is intergral part of tube which is made up of polycarbonate material which gives diffused light. The total power consumption should not exceed 44W (including driver).

Supply

Installation, testing and commissioning

LED Bulkhead with a nominal system lumen output of not more than 1100 lumens and a minimum system efficacy of 110 lm/W. The luminaire should have a color temperature of 6500K and CRI > 80. The luminaire shall meet IP66 rating and IK 08 rating with THD < 20% and PF > 0.9. The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser. The total power consumption should not exceed 10W (including driver).

Supply

Installation, testing and commissioning

LED non-integral higbay light fitting complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, LED High bay wide beam of 132W having System Efficacy >130 lm/W, lumen output of 19800 lumens system output THD <10%, Power Factor >0.95, CRI >80, SDCM<5, CCT 5700, Full IP 66 protected pressure die cast aluminium (LM6) housing having integrated PC lens cover with Impact resistance IK08. Operating temp. -10 degrees to 50 degrees C. BIS compliant driver, EMC -EMI compliant. Driver shall have 10KV Surge protection. Shall have eye bolt hook for surface/ suspended mounting.

Supply

Installation, testing and commissioning

Outdoor type 40 W LED periphary light suitable for wall mounting with all the accessories , IP66 surface mounted type, housing made up of pressure die cast aluminum Alloy with effective thermal management,sturdiness. The fixture should have a minimum system efficacy of 120 lumen/Watt and a minimum system lumen output not more than 13400 lumens. The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=05. The fixture driver should have an operating voltage range of 140-270 V, surge protection of >=3KV, PF >0.9 and THD<20%.

Supply

Installation, testing and commissioning

Supply, Fabrication and Installation of Pre-Galvanized Powder Coated dome shaped cover of 1.6mm sheet thickness, 1220mm long for LED Tube light fittings as per specifications and instructions of Engineer-in-charge.

Supply

Installation

Supply of Single Core flexible HFFR wires ( Copper ) of size mentioned below in voltage grade 1100 V as per the IS: 3961 ( part V ) - 1968, IS 17048: 2018. As per conductor class 2 Type-C of IS: 8130 / 1984 as per technical specification

Installation/drawing through concealled/ surface conduit and wiring and termination at both ends of Single Core HFFR wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS 17048 : 2018, IS 732. As per conductor class 2 of IS: 8130 / 1984 as per technical specification

Supply, Installation, Testing and surface laying of 10 sqmm tinned coper conductor ETP grade including clamping/cleating on wall, making chase, repairing the same, connection with earth pad at one end with brass nuts and DBs at other end clamping, brazing etc. as per instructions by Engineer-In-Charge.

Supply

Installation

Supply and fixing vertical air termination made up of 20mm dia, 1 mtr long tinned copper rod attached to 145 mm dia. Tinned Copper sphere having drilled and tapped holes for fixing 5 nos. of 390mm long spikes and square copper base plate of 150 mm length and 10 mm thickness as per technical specification and approved drawing.

Supply

Installation and Testing

Supply of Busbar Insulator of size M8 x 40mm, MOC: Epoxy as per tender specification.

Installation of Busbar Insulator of size M8 x 40mm, MOC: Epoxy for fixing of downcomer conductor from lightening arrestor as per tender specification.

Supply and installation of 25x3 mm electrolytic grade copper earthing strip with a minimum copper purity of 99.9% and conductivity of ≥97% IACS. with annealed finish. Installation shall be carried out as per standard earthing practices, including proper surface laying with EPOXY insulator support with necessary bends, joints, and terminations using compatible copper clamps, brazing, or welding as specified. All connections must ensure low-resistance continuity and corrosion protection. The installed earthing strip shall comply with IS 3043 and other relevant standards, and the resistance to earth shall be tested and recorded post-installation.

Supply

Installation, testing and commissioning

Supply, Fabrication and Installation of Standard steel sections as per IS 2062 Grade BR for equipment supports, base frame for panels, wall frames and brackets for installation of lights/ equipments, earth pit cover plates, Anchor Fastners etc. Fabrication shall include drilling, entiling, welding wire brush cleaning, testing DPT etc., supply of all consumables like gas, approved welding rods, Zinc coating paint finish during installation as per EIC and tender tech spec. After fabrication two coats of epoxy based primer and two coats of finish paints shall be applied.

SITC of Junction box fabricated out of 2 mm thick hot dipped galvanised powder coated GI sheet, punched hole for conduit entry on all sides and cable of size 20 pair X 1.5sqmm with 50 nos of terminals of 4sqmm, mounting arrangement, etc as required.

Supply

Installation

SITC of Junction box fabricated out of 2 mm thick hot dipped galvanised powder coated GI sheet, punched hole for conduit entry on all sides and cable of size 10 pair X 1.5sqmm with 20 nos of terminals of 4sqmm, mounting arrangement, etc as required.

Supply

Installation

Supply, Testing and Laying of 1 Pair X 1.5sq. mm stranded, twisted pair , HFFR Type-C sheath, stranded copper conductor, flexible cable in existing laid concealed or surface conduit.

Supply

Installation

EPABX System

SITC of Indoor type double enclosure (MOC: pregalvanized GI sheet steel) powder coated MDF box 20 + 20 indoor type TTB made of SWG 14 for telephone cable as per attached tech spec.

Supply

Installation

Prefabricted powder coated GI box to accomodate modular type 2 nos RJ11 socket unit suitable for concealing or surface mounting.

Supply

Installation

Front plate with 2 no's of modular type RJ11 socket unit.

Supply

Installation

Supply, Laying, casing, caping, 25x38x25mm dressing of 2 pair, 0.5mm dia., copper conductor, unarmoured telephone cable

Supply

Installation

Supply and installation of GI anchor fastener of size M8x100 mm by drilling through concrete block as per site requirement for fixing plate EP's or other structure as per tender tech spec.

Supply

Installation

Armoured telephone cable: Supply & laying of 20 pair, 0.5 mm dia copper conductor, jelly filled armoured telephone cable as per technical specification

CAT6 UTP cable with 4 pairs of 23AWG solid bare copper conductors, HDPE insulation, full X-shaped separator (no half allowed), and black LSZH outer sheath (0.80 mm nominal). Cable is armored with aluminum wire, includes rip cord and drain wire, and is suitable for outdoor use with enhanced protection. Supports up to 250 MHz bandwidth and 1000BASE-T (Gigabit Ethernet) up to 100 meters. Complies with ANSI/TIA/EIA-568-C.2, IEC 60754-1, IEC 60332-1, UL 444; UL/ETL certified and RoHS compliant. Each meter marked with length and manufacturing details.

Supply

Installation

Supply of required material and making of straight exothermic braze joints of copper conductors (95 sqmm) as per technical specification.

Supply of required material and making of 'T' type exothermic braze joints of copper conductors (95 sqmm) as per technical specification.

Supply and Installation of 2mm thick pre-galvanished GI sheet including marking,cutting (as per site requirement)and erection on top of JB openings on wall and ceiling at approximate height of 5mtrs.

Supply

Installation

Supply, Fabrication and Installation of Pre-Galvanized Powder Coated dome shaped cover of 1.6mm sheet thickness, 1220mm long for LED Tube light fittings as per specifications and instructions of Engineer-in-charge.

SARASWAT ENGINEERING SERVICES (BID ID -3244308)

POZITRON ENGINEERING SYSTEMS (BID ID -3248258)