Construction of cremation Hall Karuma Kariyam Mandabam at Kaveripakkam Ward 20 in Tindivanam Municipality

Amount

Earth work excavation in sand silit (or) other loose soil, wet sand sandy loam including excavated earth with initial lead and lift of 1m and 2m respectively etc., complete as per standard specification.

Supplying and filling in foundation and basement with River sand in layers of not more than 15cm thick well rammed, watered and consolidated etc., complete complying with standard specification.

Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in Cement Mortar 1:5 Mix using country Bricks of size 8¾ x 4¼ x 2¾ including cost of bricks and conveyance and including all labour charges and all other incidential charges etc., completed as per standard specifications. For Foundation and Basement

For Ground floor

Supplying and fabricating in position of MS or RTS rods for RCC work including the cost of steel and binding wire and all labour charges for cutting bending tying grill and stengthening and all labour chrges including the fabeication charges etc complete.

Suppying and erecting shuittering including necessary supports for plane surface in foundation and basement for RCC roof slabbeams , column footing, plinth beam, grade beam, criical piers, sill slabs, steps, etc using suitable mild steel sheets of B. G. 10 stiffened with welded suitable mild steel angles for boardings supported by casuarina props 10cm to 13cm dia spaced at suitable intervals etc complete as directed by thr deopartmental officetrs complying with standard specifications. For coloumn

For Roof slab,lintel,beam etc.,

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) For Foundation and Basement

For Ground floor

Plastering with cement mortar 1:5 (one cement and five sand) 12mm thick, in all floors etc., complete complying with standard specification,

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

Manufacturing supply and fixing of steel doors with following specification. MS angles of size 40x40x6mm at 3.5kg/m used for the outer frame and MS angles of size 35x35x5mm at 2.60kg/m for the outer frames. Stiffners with 32x6mm at 1.5kg.m MS flat is provided at the lock rail of the door and welded intact on both sides to the shutter frame, 18gauge CR sheets of best quality is laid as panel in the shutter frames, 18x5mm at 0.70kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS flat on the rear side of the doors and welding the CR sheet for rigidly. Additional stiffners with 18x5mm at 0.7kg/m MS flat are provided diagonallyetc., complete as per standard specification

Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved first quality synthetic enamel paint approved colour over the existing red oxide priming coating all floors. The rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with std charges etc., complete complying with standard specification. (Paints should be got approved by the Executive Engineer before use on work).

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.sd 125

OVER HEAD MAINS; Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains

G Ravichandran (BID ID -1366620)