Interior renovation and furnishing works at ED office, NBCC imperia Bhubaneswar

ABSTRACT OF COST

Sl.No. DESCRIPTION DSR-2023 (AMOUNT) TOTAL

6 AUDIO VISUAL SYSTEM 87,64,132.00 87,64,132.00

8 NETWORKING / IT SYSTEM 83,83,644.00 83,83,644.00

GRAND TOTAL 6,30,73,659.00

GRAND TOTAL 6,30,73,659.00

Digitally signed by JAYA

NBCC (INDIA) LIMITED

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA BHUBANESWAR

DSR 2023 Item DSR-2023 Rate NDSR RATE DSR Amount NDSR Amount

Description Quantity Unit

No. (INR) (INR) (INR) (INR)

Providing and laying in position cement concrete of specified grade excluding the cost

4.1 of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded

stone aggregate 20 mm nominal size derived from natural sources)

1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded

stone aggregate 40 mm nominal size derived from natural sources)

REINFORCED CEMENT CONCRETE WORK

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm

to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to

IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band

6.47 at sill level and lintel level with approved block laying polymer modified adhesive 111.05 cum ₹ 8,333.65 ₹ 9,25,452

mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC

band and reinforcement shall be made for seperately).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-in-

8.31 Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 372.55 sqm ₹ 1,267.95 ₹ 4,72,375

1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching shade complete.

WOOD AND PVC WORK

Providing wood work in frames of doors, windows, clerestory windows and other

frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners

9.1 of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 3.00 cum ₹ 1,42,949.70 ₹ 4,28,849

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

decorative type, core of block board construction with frame of 1st class hard wood

and well matched teak 3 ply veneering with vertical grains or cross bands and face

veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost

of glass excluded) (overall area of door shutter to be measured):

9.24.1 Rectangular or square 0.00 sqm ₹ 199.15 ₹0

Extra for cutting rebate in flush door shutters (Total area of the shutter to be

Providing and fixing wooden moulded beading to door and window frames with iron

9.40 screws, plugs and priming coat on unexposed surface etc.

9.40.1 2nd class teak wood

Providing and fixing bright finished brass tower bolts (barrel type) with

necessary screws etc. complete

Providing and fixing bright finished brass handles with screws etc.

Providing and fixing bright finished brass hanging type floor door stopper with

9.82 necessary screws, etc. complete. 34.00 each ₹ 121.65 ₹ 4,136

Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg

9.84 and door width from 701 mm to 1000 mm), with double speed adjustment with 79.00 each ₹ 983.15 ₹ 77,669

necessary accessories and screws etc. complete

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6

9.88 levers and a pair of lever handles of approved quality with necessary screws etc. 17.00 each ₹ 998.35

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating

9.96 not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or

shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

9.97 coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed

to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less

9.100 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade,

with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised

9.101 (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour and shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper 62.00 each ₹ 72.35 ₹ 4,486

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA BHUBANESWAR

DSR 2023 Item DSR-2023 Rate NDSR RATE DSR Amount NDSR Amount

Description Quantity Unit

No. (INR) (INR) (INR) (INR)

Providing and fixing partition upto ceiling height consisting of G.I. frame and required

board, including providing and fixing of frame work made of special section power

pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),

consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and

0.50 mm thick, fixed to

the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of

12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with

nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange

36 mm and 0.50 mm thick

fixed vertically within flanges of floor and ceiling channel and placed at a spacing of

610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along

9.105 both ends of partition fixed flush to wall with suitable anchor fastener or metal screws

with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both

side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels

at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame

work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm

width (0.9 mm thick having two flanges of 9.5

mm each) to be provided at the horizontal joints of two boards, fixed to

the studs using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing compound, jointing

tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher

and two coats of primer suitable for board as per manufacture's

specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain

9.105.2 Gypsum plaster board conformingto IS: 2095: (part I): 2011 (Board with BIS 1585.35 sqm ₹ 1,818.15 ₹ 28,82,404

certification marks)

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall

thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at

corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square

tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square

9.119 tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the 361.50 metre ₹ 492.70 ₹ 1,78,111

frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size,

complete as per manufacturer’s specification and direction of Engineer- in-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made

out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and

15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of

approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded

PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be

flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5

mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall

be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm

wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both

9.120 sides to form lock rail. Top, bottom and lock rails shall be provided both side of the

panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap

insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted

in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x

15 mm wide PVC sheet beading on inner side, and joined together with solvent

cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck

on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as

per direction of Engineer-in-charge, manufacturer's specification & drawing.

9.120.1 30 mm thick plain PVC door shutters 84.00 sqm ₹ 3,182.95 ₹ 2,67,368

Providing & Fixing decorative high pressure laminated sheet of plain

/ wood grain in gloss / matt/ suede finish with high density protective

surface layer and reverse side of adhesive bonding quality conforming to

IS : 2046 Type S, including cost of adhesive of approved quality.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing

in position and applying a priming coat of approved steel primer using structural steel

etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with

grey cement slurry mixed with pigment to match the shade of the slab, including

rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12

mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with

11.27 grey cement slurry mixed with pigment to match the shade of the slabs, including

rubbing and polishing complete.

First floor 2.18 sqm ₹ 2,354.70 ₹ 5,133

Providing and laying ANTI-SKID rectified Glazed Ceramic floor tiles of size 300x300

mm or more (thickness to be specified by the manufacturer), of 1st quality conforming

to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid

11.39 on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey 80.11 sqm ₹ 1,330.00 ₹ 1,06,546

cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

matching pigments etc., complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to

IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm

thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry

11.41A @3.3 kg/sqm including grouting the joints with white cement and matching pigments

etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles

will be done with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily

11.41A.2 Glazed vitrified floor tiles polished finish of size

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA BHUBANESWAR

DSR 2023 Item DSR-2023 Rate NDSR RATE DSR Amount NDSR Amount

Description Quantity Unit

No. (INR) (INR) (INR) (INR)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to |.S. 15622,

of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick

11.46 bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including

grouting the joint with white cement & matching pigments etc.

Providing and laying flamed finish Granite stone flooring in required design and

patterns,in linear as well as curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base

of cement mortar.1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry

11.55 and pointing with white cement slurry admixed with pigment of matching shade

including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in Charge :

Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized with

zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm

dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size and other end

of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450

mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at

12.45 every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having

flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with

the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and perimeter channel with

the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and

finishing to a flush finish of tapered and square edges of the board with recommended

jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter

channels suitably fixed, all complete as per drawings, specification and direction of

the Engineer in Charge but excluding the cost of painting with :

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board 1336.66 sqm ₹ 1,529.10 ₹ 20,43,887

13.1 12 mm cement plaster of mix :

Applying priming coat with primer of approved brand and manufacture having low

VOC (Volatile organic compound) content

13.85.3 Water thinnable cement primer 3220.34 sqm ₹ 73.95 ₹ 2,38,144

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot

Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,

Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon

New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including

priming coat of exterior primer applied @ 0.90 litre/10 sqm.

13.67 Varnishing with varnish of approved brand and manufacture :

Two or more coats of glue sizing with copal varnish over an under coat of flatting

Providing and applying white cement based putty of average thickness 1 mm, of

13.80 approved brand and manufacturer, over the plastered wall surface to prepare the 3220.34 sqm ₹ 156.05 ₹ 5,02,534

surface even and smooth complete.

DISMANTLING AND DEMOLISHING WORK

Demolishing brick work manually/ by mechanical means including

15.7 stacking of serviceable material and disposal of unserviceable material

within 50 metres lead as per direction of Engineer-in-charge.

WATER PROOFING WORK

Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS : 2645 in recommended proportions including rounding

off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster

1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended

proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd

course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet

should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Description DSR-2023 Rate NDSR RATE DSR Amount NDSR Amount

SL.No Quantity Unit

(INR) (INR) (INR) (INR)

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA BHUBANESWAR

DSR 2023 Item DSR-2023 Rate NDSR RATE DSR Amount NDSR Amount

Description Quantity Unit

No. (INR) (INR) (INR) (INR)

Providing and fixing Carpet Tile of approved make, shade and pattern and of the

following specification: Loop pile carpet tile of size 250 mm x 1000mm / 500mm

x500mm with Tufted 1/10-12" construction, 100% Solution Dyed Nylon 6 Yarn with

secondary backing modified PVC Glass filled having pile height of 3mm +/- 0.5mm,

and maximum total height of 6mm=/- 0.5mm having total weight 4000-5000 g/m2 and

pile above backing 475-550/ m2 tuft density 5100-5800 oz/yd3, chair suitability BS-EN

985 r ≥ 2.4 for continuous use under chair castors and achieve class: A as per N985,

it should dimensionally stable to a max limit of 0.2% as per ISO 2551 ≤ 0.2%, it should

have fire resistance rating of BfI-S1 as per EN 13501-1, it should achieve permanent

anti-static reading < 3000 Volts as per AATCC 134 , it should have sound absorbtion

cofficeint of NRC ≥ 0.10, it should achieve a reading of ≥ 4 for colorfastness to light

as per AATCC 16E, it shud achieve a reading of ≥ 4 for rubbing fastness as per

AATCC 165, it should achieve a reading of ≥ 4 for colorfastness to water as per

AATCC 107, It should have anti microbial treament as per AATCC174. Standard

carpet warranty is 15 years. All works should be complete as per design/ drawing &

as per direction/ satisafction of Engineer-in-charge.

Providing and laying 6mm-9 mm thick AC5 grade laminate wooden flooring of having

good chair and furniture resistance strength. Plank dimension to be 1215-1220mm

*190mm-195mm with valinge clock locking system and wax coating for better sound

resistance. Impact and abrasion resistance to be of high grade having class EN

MR-2 13329. The flooring shall be laid with 2mm thick underlay and PVC sheet and prevent 0.00 sqmt ₹ 2,257.96 ₹0

against moisture and foot taping sound. All works should be complete as per design/

drawing & as per direction/ satisafction of Engineer-in-charge.

Providing and fixing trap door in false ceiling made of 12mm thk moisture resistant

gypsum board fixed on powder coated Aluminium section frame. Each panel features

a push latch closing mechanism with door retaining safety cable & hook. one stiffener

MR-3 is used upto 900mm Length & two stiffeneres for more than 900mm length. The outer 20.00 each ₹ 8,086.38 ₹ 1,61,728

frame shall be fixed to false ceiling G.I. sections with necessory screws complete in

all respect to the entire satisfaction of Engineer Incharge.

Supplying and fixing of Slim Glass Internal Partition System & Aluminium profile fixed

framed system with Glass 10 mm clear Toughened / Tempered glass as per

approved drawing . Finish All exposed aluminium sections are BLACK MATT. Fix

Glass Panel Aluminium extrusion Profile size 2.5M Section 45x22mm/ 50X30mm &

3M Section 45x22mm/ 50X30mm of Black Matt finish with all required Gasket and

seal, NO USE OF SILICONE to fill the gap between the glass to glass, all gaps should

be filled with sleek aluminium 'I' Profile 3M BM and 'L' Profile 3M BM of Black Matt

MR-4 finish. Provided profile and accessories shall be suitable for glass thickness of 10mm 120.00 sqmt ₹ 10,530.63 ₹ 12,63,675

the profile manufacturar to has supply all the necessary clips,seals, cleat and other

relevant accessories for system. All Profiles are min 1.5mm thickness excluding 20

microns of Anodizing, Contactor or Fabricator has to ensure to casing profile to

match the all joints properly. Finished work would be to the satisfaction of the Enginer

Supply and fixing of Aluminium Glazed Door (Single Leaf with Glass infill of 10mm

toughened glass with rebate door frame System all around the door. Aluminium Stile

to be formed out of 70x35mm horizontal and vertical door profile frame with clips &

seals. Door Hardware -Open Door Closer with slide channel and hold open, offset pull

Handle with Narrow stile dead lock package and Door Drop down seal. The Profile

and Hardware shall be matt black anodized, including all the necessary clips, seals

and fixing accessories for the system. All Profiles to be with 1.5 mm Gauge thickness

excluding 20 Micron of anodizing. Door SIze - 900mm x 2400mm (but not fixed). All

complete as per approved manufacturer's specifications and directions of the Enginer

Supply, installation and placement of Wall Paper Providing & fixing Vinyl Wall

covering Roll: with paper back. Shock-proof and scrape-proof. 100% Washable, Care:

neutral home detergents, Resistant to microorganisms, mildew, residual odors. Good

light fastness, Peelable. Fire rating: MI. Before hanging, check quality. quantity and

colour. to be fixed with water base glue. all complete as per Architect's Specification.

Finished work would be to the satisfaction of the Enginer in charge.

Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass

substrate 25mm thick, wrapped on the front side with an acoustically transparent

fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal,

Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as

per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or

600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of

Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with

50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden

battens and using Wall panel Impalers (supplied by the manufacturer) or by using

construction adhesives (as per the instructions laid down by the manufacturer). The

fibre glass substrate shall have a recycle content of 85%.

Properties of Tile Relevant Standards

Base Material Fibre Glass

Panel Dimensions 600mm x 600/1200mm

MR-7 Panel Thickness 25mm 55.00 sqmt ₹ 7,266.72 ₹ 3,99,670

Panel Finish Acoustically transparent fabric as per the approved shade (Husk,

Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell).

Fire Properties Class A ASTM E-84

Noise Reduction Co-efficient 0.85 ASTM C423 (Average value of Absorption

Coefficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz)

Recycled Content 85%

Dimensional tolerances ± 5mm

An appropriate vapour barrier (by others) shall be applied/installed on the vertical

surface before the installation to properly seal against entry of any moisture. Vapour

barrier (by others) shall be installed as per Manufacturer’s recommendation. Install

wooden batten grid (provided by others) of section 50x50mm or as approved by the

Architect on the solid wall/partition to provide level and plumb surface. The Impalers

shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600x600mm

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA BHUBANESWAR

DSR 2023 Item DSR-2023 Rate NDSR RATE DSR Amount NDSR Amount

Description Quantity Unit

No. (INR) (INR) (INR) (INR)

Blackout Roller Blinds

Providing, supplying and installation of 100% Blackout Roller Blinds containing fabrics

with thickness of 0.35 mm, weight of 360 g/m2, width 300 cm. The composition of

fabric will contributes with 100% polyester with acrylic coating with a low emitting

product that reduces the risk of health problems like headache, skin irritation, loss of

concentration and absence of toxic ingredients. Green guard by UL and Fireproof of

Fire Classification – M1. The mechanism of blinds contains the roller tube, shall be of

extruded Aluminium alloy 48 mm O.D. with a minimum wall thickness of 1.0 mm duly

anodized for long life. It shall be designed to accommodate spring clutch and gear

system. Spring clutch with gear shall be provided for finger-touch raising and lowering

of the blind. Clutch shall be of wrap spring design with high strength fiberglass

reinforced polyester assembly and high carbon steel springs to transmit motion from

driving to driven members of clutch mechanism. Clutch shall be crash proof, prevent

MR-8 slippage and shall raise and lower smoothly to any desired height. Clutch never needs 150.00 sqm ₹ 2,446.71 ₹ 3,67,006

adjustment. Idler shall be of high strength fiberglass reinforced polyester, consisting of

an outside sleeve and centre shaft. Sleeve shall provide bearing surface for roller tube

and rotate freely on centre shaft, providing smooth, quiet and long wearing operation.

Bracket shall be tomized steel powder coated to give superior finish. Bracket shall

accommodate overhead, side or face mounting with clutch assembly on either end

roller. Bottom of blind shall be provided with Aluminium tube powder coated in a

colour matching to the fabric or standard. The fabric shall be enclosed in the suitably

created pocket along with the tube. The tube shall be closed from sides with end caps

to give a neat look. The appropriate fixing surface & electrical connections for motor

as per the prerequisites of oem will be provided by the customer etc.

Translucent Roller Blinds Providing, supplying and installation of Translucent Roller

Blinds containing fabrics with thickness of 0.3 mm, weight of 170 g/m2, width 250 cm.

The composition of fabric will contributes with 100% polyester a low emitting product

that reduces the risk of health problems like headache, skin irritation, loss of

concentration and absence of toxic ingredients. Green guard by UL and Fireproof of

Fire Classification – M1. The mechanism of blinds contains the roller tube, shall be of

extruded Aluminium alloy 48 mm O.D. with a minimum wall thickness of 1.0 mm duly

anodized for long life. It shall be designed to accommodate spring clutch and gear

system. Spring clutch with gear shall be provided for finger-touch raising and lowering

of the blind. Clutch shall be of wrap spring design with high strength fiberglass

reinforced polyester assembly and high carbon steel springs to transmit motion from

driving to driven members of clutch mechanism. Clutch shall be crash proof, prevent

slippage and shall raise and lower smoothly to any desired height. Clutch never needs

adjustment. Idler shall be of high strength fiberglass reinforced polyester, consisting of

an outside sleeve and centre shaft. Sleeve shall provide bearing surface for roller tube

and rotate freely on centre shaft, providing smooth, quiet and long wearing operation.

Bracket shall be tomized steel powder coated to giove superior finish. Bracket shall

accommodate overhead, side or face mounting with clutch assembly on either end

roller. Bottom of blind shall be provided with Aluminium tube powder coated in a

colour matching to the fabric or standard. The fabric shall be enclosed in the suitably

created pocket along with the tube. The tube shall be closed from sides with end caps

to give a neat look. The appropriate fixing surface & electrical connections for motor

as per the prerequisites of oem will be provided by the customer etc.

Vertical Blinds The louvers shall be 100mm wide made of fabric woven from

polyester viscose yarn dyed in fade resistant colors and coated to give stability, dust

repellence and stain resistance. The fabric shall be 1.2mm to 1.3 mm thick and weight

650gm.per sqm. The louvers shall hang straight and flat without buckling or distortion

and striations shall be as per accepted standard. The head-rail shall be of extruded

aluminium alloy measuring 45mm wide and 25mm high with a minimum wall

thickness of 1.10mm. The head-rail shall house all operating components of the blind

and shall be powder paint coated. The carriers shall be made of delrin acetal resin

and traverse on two wheels along the guide slots in the head-rail. Each carrier shall

have a self-aligning worm and spur gear mechanism to provide a synchronised 180_

louvre rotation by use of an aluminium alloy tilt rod functioning as a drive shaft

between the control box and the carriers. The spacing of each carrier shall be

controlled by a plastic spacer fixed to the carrier body providing a minimum louvre

MR-10 overlap of 14mm in the fully closed position. The control box shall house the planetary 0.00 sqm ₹ 2,027.27 ₹0

tilt gear hub for turning of the louvres and shall also have rollers for traverse cord. An

endless plastic chain shall synchronize and actuate 180- rotation by turning the tilt rod

attached to the tilt gear sprocket on the one end and the non-operating cap on the

other end. Louvres shall traverse left to right, right to left or split by means of the

traverse cord. Louvres shall incorporate hem pockets at top and bottom sewn with

monofilament clear thread for inserting hanger and bottom weight- Hanger shall be

made of nylon and bottom weight shall be made of galvanised steel moulded with

nylon. Bottom weights shall be connected together on both sides with plastic bead link

chain. The traverse cord shall be tensioned by a cord weight, which shall be

removable without detaching cord from headrail.

Supply , fitting & fixing of 25MM. thick BWR ply of in sizes on MS understructure in

the stepped seminar hall floor including cutting, screwing ; nailing , adhesive etc. all

complete as per design/ drawing & as per direction of Engineer-in-charge.

Supply and installation of 6 mm thick synthetic floor which consist of 100%

pure vinyl wear layer not less than 1.5 mm thick, with protecsol and sanosol treated to

reduce Skin burn with double fiber glass grid for sound stability on floor width of sheet

MR-12 not less than 1.5 M Laid with adhesive tape as per manufacturer’s instruction over 0.00 sqm ₹ 4,325.86 ₹0

Laid with adhesive as per manufacturer’s instruction over existing levelled surface all

complete as per the satisfaction of Enginner-in-charge.

Providing and fixing frosted film for Glass door and partition as per manufacturer's

MR-13 specifications all complete as per the satisfaction of Enginner-in-charge. 35.00 sqm ₹ 2,133.04 ₹ 74,656

MR-101 Providing and fixing of WPC toilet cubicle in common toilets 8.00 sqm ₹ 30,000.00 ₹ 2,40,000

GRAND TOTAL ₹ 1,39,79,018

GRAND TOTAL ₹ 1,39,79,018

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED

OFFICE, NBCC IMPERIA BHUBANESWAR

COST SUMMARY : PHE WORKS

S.NO DESCRIPTION OF ITEM 2023(AMOUN SCHEDULED

A SANITARY FIXTURE 4,58,608.55 3,96,197.63

B SOIL,WASTE, AND VENT PIPES AND FITTINGS - 2,03,690.50

C WATER SUPPLY 2,67,322.65 4,21,251.77

GRAND TOTAL 17,47,071.10

GRAND TOTAL 17,47,071.10

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA BHUBANESWAR

BILL OF QUANTITY (PLUMBING WORKS)

SL. DSR-2023 Rate NDSR RATE DSR Amount NDSR

2023 Item No/NS DESCRIPTION OF ITEM UNIT Total QTY

NO. (INR) (INR) (INR) Amount (INR)

1.00 A SANITARY FIXTURE

1.10 Providing and fixing water closet squatting pan (Indian type

pan ) with 100 mm sand cast Iron P or S trap, 10 litre low

17.1 level whiteP.V.C. flushing cistern, including flush pipe, with

manually controlleddevice (handle lever) conforming to IS :

7231, with all fittings andfixtures complete, including cutting

and making good the walls andfloors wherever required:

White Vitreous china Orissa pattern W.C. pan of size

580x440 mm with integral type foot rests

1.20 Providing and fixing white vitreous china extended wall

mounting water closet of size 780x370x690 mm of approved

shape including providing & fixing white vitreous china cistern

17.78 with dual flush fitting, of flushing capacity 3 litre/ 6 litre Each 10 14999.15 1,49,991.50

(adjustable to 4 litre/ 8 litres), including seat cover, and

cistern fittings, nuts, bolts and gasket etc complete.

17.5 Providing and fixing white vitreous china flat back half stall

urinal of size 580x380x350 mm with white PVC automatic

flushing cistern, with fittings, standard size C.P. brass flush

pipe, spreaders with unions and clamps (all in C.P. brass)

with waste fitting as per IS : 2556, C.I. trap with outlet grating

and other couplings in C.P. brass, including painting of fittings

and cutting and making good the walls and floors wherever

17.5.2 Range of two half stall urinals with 5 litre P.V.C. automatic

flushing cistern Each 1 18008.75 18,008.75

17.5.3 Range of three half stall urinals with 10 litre P.V.C. automatic

flushing cistern Each 2 22058.25 44,116.50

Providing and fixing wash basin with C.I. brackets, 15 mm

C.P. brasspillar taps, 32 mm C.P. brass waste of standard

17.7 pattern, including painting of fittings and brackets, cutting and

making good the wallswherever require:

White Vitreous China Wash basin size 630x450 mm with

17.7.2 a Single 15 mm C.P. brass pillar taps Each 12 2226.35 26,716.20

1.40 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen

sink as per IS:13983 with C.I. brackets and stainless steel

17.10 plug 40 mm,including painting of fittings and brackets, cutting #REF!

and making good the walls wherever required :

17.10.1 Kitchen sink with drain board

1.60 Providing and fixing CP Brass 32mm size Bottle Trap of

approved quality & make and as per the direction of

Providing and fixing CP Brass Single lever telephonic wall

17.22 B mixer of quality & make as approved by Engineer in charge.

a) 15 mm nominal dia Each 2 6940.75 13,881.50

1.80 Providing and fixing 600x450 mm beveled edge mirror of

superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass

screws and washers complete.

1.90 17.34 Providing and fixing toilet paper holder :

Providing and fixing uplasticised PVC connection pipe with

18.21.1 30cm length

18.21.1.1 15mm nominal bore Each 38 85.00 3,230.00

Providing and fixing C.P. brass shower rose with 15 or 20

18.22 mm inlet :

Providing and fixing C.P. brass bib cock of approved quality

conforming to IS:8931 :

18.49.1 15mm nominal bore Each 8 506.80 4,054.40

Providing and fixing C.P. brass angle valve for basin mixer

and geyser points of approved quality conforming to IS:8931 :

18.53.1 15 mm nominal bore Each 38 574.30 21,823.40

Providing and fixing C.P. Brass extension nipple (size

18.53.A 15mmx50mm) of approved make and quality as per direction Each 34 74.80 2,543.20

of Engineer-in-charge.

SUB TOTAL( SANITARY FIXTURES) 4,58,608.55

NON SCHEDULED ITEMS(SANITARY FIXTURE)

Providing and fixing WALL Hung water closet with Half frame

Consealed flushing cistren & flush plate along with all

accessories ,complete in all respectas per the direction of

Engineer-in-Charge.

Providing and fixing Over Counter Top Basin with Wall

Mounted Pillar Cock-Upper Trim with Concealed Pillar Cock

NS-2 Body including fittings, cutting and making good the walls Each 6 11269.20 67,615.21

wherever require etc all complete as per the direction of

Engineer-in-Charge.

NS-3 Providing and fixing SS towel rod complete in all respect Each 6 1026.37 6,158.24

Providing and fixing soap tumbler holder (Brass) complete in

Providing and fixing SS waste coupling 32 mm dia for wash

NS-5 basin and sink complete in all respect Each 8 363.90 2,911.17

Digitally signed by JAYA

Providing and fixing two-way Bib cock & Health faucet with

NS-6 hose and bracket complete in all respect Each 8 5538.18 44,305.47

Providing and fixing wall mounted sink cock complete in all

NS-7 respect Each 8 3386.16 27,089.28

Providing and fixing Stainless steel grating with frame for

NS-9 floor traps or drains of required pattern complete in all respect Each 8 1130.38 9,043.03

SUB TOTAL (NON-SCHEDULED) 3,96,197.63

2.00 NON SCHEDULED ITEMS (SOIL,WASTE, AND VENT

B PIPES AND FITTINGS)

2.10 Providing and fixing Acoustic Multilayer Polyproplene piping

system as per EN 1451-Part 1-6 with 3 layer pipe made of PP

+ PP-MD + PP and one layer fittings in PP MD, push-fit

type,Halogen and Cadmium free, having high impact

resistance as per DIN EN ISO 291:2008-08 , Ring stiffness

SN6 6KN/m2 as per ISO 9969, offering sound levels of 21

dBA as per EN 14366 at a flow rate of 4 l/s, water tightness

as per EN 1451-1 minimum of 0.5 bar for 15 minutes, density

of pipe = 1.15gms/cm3, elongation = 0.09mm/mn/K and E

modulus 2300-3000 as per ISO 178, along with factory fitted

SBR - NR, NBR lip ring, Fire Behavior Classification

according to EN 13501-1:2009 & classified D-s2-d2 (EN

13501-1), meets the requirements of EN 4102-2 with Fire

Classification B2, Smoke Development Category Q1 & Drip

Formation category TR1. (With all fittings)

a) NS-10 110 mm dia Ultra Silent Pipe with One Socket L 3000 Mtr 110 908.02 99,882.10

ai) NS-11 75 mm dia Ultra Silent Pipe with One Socket L 3000 Mtr 45 775.19 34,883.65

NS-12 50 mm dia Ultra Silent Pipe with One Socket L 3000 ( (Wash

basin/urinal to Multi floor trap complete in all respect) Mtr 22 403.65 8,880.21

b) NS-13 Supply , installation , testing and commissioning

Polypropylene (PP) 110mm x 110mm size P trap (Floor trap)

of self cleaning design with Min. 50mm water seal with and

without vent arm jointing with push fit rubber ring socket

fittings complete, cutting chases / hole in floors / slabs and

bringing the same in proper condition and shape after placing Each 10 1018.34 10,183.39

the trap in right position in case of suspended / open

plumbing or setting the trap in 1:2:4 CC in case of concealed

plumbing , etc. complete, as required. The trap shall be of

following sizes: Temporary airtight, End Cap to be provided to

prevent dirt entry.

bi) NS-14 Supply , installation , testing and commissioning

Polypropylene (PP) 110x50x50 mm size ULTRA SILENT

CORNER BRANCH 90 DEG after placing the trap in right

position in case of suspended / open plumbing or setting the

trap in 1:2:4 CC in case of concealed plumbing , etc.

complete, as required. The trap shall be of following sizes:

Temporary airtight End Cap to be provided to prevent dirt

NS-15 Supply , installation , testing and commissioning

Polypropylene (PP) 110x110 mm size ultra silent inspection Each 20 1,085.60 21,712.08

NS-16 Supply , installation , testing and commissioning ultra silent

multi floor trap with ring 110x75x50 complete in all respect) Each 10 1,261.86 12,618.55

SUB TOTAL( SOIL, WASTE & VENT PIPES) 2,03,690.50

3.00 C WATER SUPPLY

3.10 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

having thermal stability for hot & cold water supply, including

CPVC plain & brass threaded fittings, including fixingthe pipe

with clamps at 1.00 m spacing. This includes jointing of pipes

& fittings with one step CPVC solvent cement and testing of

Internalcomplete

work -as per direction

Exposed of Engineer in Charge.

18.7.2 20 mm nominal outer dia Pipes Mtr 36 335.00 12,060.00

18.7.3 25 mm nominal outer dia Pipes Mtr 48 401.55 19,274.40

18.7.4 32 mm nominal outer dia Pipes Mtr 45 518.75 23,343.75

18.7.5 40 mm nominal outer dia Pipes Mtr 24 702.95 16,870.80

3.20 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

having thermal stability for hot & cold water supply, including

CPVC plain & brass threaded fittings, i/c fixing the pipe with

clampsat 1.00 m spacing. This includes jointing of pipes &

fittings with onestep CPVC solvent cement and the cost of

Concealedchases andincluding

work, making good the same

cutting including

chases testing of

good the walls etc.

a) 18.8.1 15 mm nominal outer dia Pipes Mtr 50 497.80 24,890.00

b) 18.8.2 20 mm nominal outer dia Pipes Mtr 92 537.60 49,459.20

c) 18.8.3 25 mm nominal outer dia Pipes Mtr 70 627.25 43,907.50

d) 18.8.4 32 mm nominal outer dia Pipes Mtr 56 739.30 41,400.80

3.30 Providing and fixing gun metal gate valve with C.I. wheel of

18.17 approved quality (screwed end) :

a) 18.17.1 25mm nominal bore Each 6 622.40 3,734.40

18.17.1 A 20 mm nominal bore Each 8 539.95 4,319.60

18.17.2 32mm nominal bore Each 10 689.60 6,896.00

18.17.3 40 mm nominal bore Each 4 826.10 3,304.40

Providing and fixing G.I. pipes complete with G.I. fittings and

i/c cutting and making good the walls etc.:

18.10.5 40 mm dia nominal bore Mtr 22 811.90 17,861.80

SUB TOTAL( WATER SUPPLY) 2,67,322.65

Digitally signed by JAYA

Providing and fixing water cooler (Material and Finish-

Stainless Steel ) Size L ,Number of faucets-2,Cooling

Capacity - 40 L/h ,Storage capacity-80 L ,Refrigerant - R-

134a eco friendly (Non CFC) USP- #High-quality stainless

steel tank and components for safe drinking water # Reliable

NS-17 reciprocating compressor for longer product life Each 6 60268.36 3,61,610.17

#Accessories: Water inlet hosepipe and overflow pipes

provided with the unit #Specially designed float valves made

of food-grade plastic #Adjustable pedestals made of highly

non-corrosive and strong material with water purifier RO 25

ltr/hour tank capacity 6 ltr

NS-18 Providing and fixing geyser (25 ltrs)complete in all respect Each 6 9940.27 59,641.60

SUB TOTAL NON SCHEDULED ( WATER SUPPLY) 4,21,251.77

Digitally signed by JAYA

NBCC (INDIA) LIMITED

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED

OFFICE, NBCC IMPERIA BHUBANESWAR

ESTIMATED COST AS PER AS PER MARKET

S.NO. DESCRIPTION (FIRE FIGHTING)

DSR (E&M) 2022 RATE

A FIRE FIGHTING

SUB TOTAL 17,01,989.82

Digitally signed by JAYA

BOQ : FIRE WORKS

TOTAL DSR (E&M)- NDSR TOTAL DSR TOTAL NDSR

DSR (E&M)-2022 ITEM DESCRIPTION UNIT GST

QTY 2022 RATE RATE (INR) AMOUNT (INR) AMOUNT (INR)

Providing,fixing, joining ,testing & commissioning in position of 'C'

class heavy duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with suitable

clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required:

Supplying, fixing, testing and commissioning of butterfly valve of

PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete

with nuts, bolts, washers, gaskets conforming to IS 13095 of

following sizes as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid

18.21 bulb type sprinklers of rating 68 degree centigrade with required - - -

18.21.3 Side Wall sprinklers Nos. 30.00 617.00 656.06 19,681.68

Providing & fixing flow switch in following sizes M.S. pipe including

connection etc as required.

Supplying, installation, testing & commissioning of sprinkler flexible

pipe (UL Listed) of stainless steel complete with 15 NPT on

reducer thread with maximum working pressure of 175 PSI test

18.25 pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT -

male thread to sprinkler head (Outlet) 15mm NPT female thread

with reducer, nipple, 2 side brackets, center bracket, stockbar of

following sizes complete as required

Providing, installation, testing & commissioning of adjustable

18.29 rosette plate for 15mm dia in white finish UL Listed or FM Nos 80.00 225.00 239.24 19,139.40

approved complete as required

TOTAL SCHEDULED ITEM - - 11,53,938.88

79 deg.C temperature rating Pendent sprinkler for kitchen

preparation area

Supplying, installing, testing and commissioning of Gun metal

chrome finished Ball valves with SIGHT GLASS , fittings of - -

screwed end type for test connection

NS-3 25 mm dia Nos. RO 1,761.63

Supply, fixing, testing and commissioning of Glycerin filled

Pressure Gauge with accessories , suitable to existing 150mm - - -

sprinkler header.

NS-4 150 mm dia dial Size Nos 4.00 1,468.02 5,872.10

NS-5 100 mm dia dial Size Nos RO 1,468.02

SUB TOTAL 12,918.61

PORTABLE FIRE EXTINGUISHERS

Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand

new seamless cylinder, as per IS: 7285 and CCE approval, fitted

NS-6 with Discharge hose and horn and wheel type valve with initial Nos. 10.00 9,865.12 98,651.24

Charge as per IS: 15683:2018 specification, bearing ISI Mark &

ABC Stored Pressure type Fire Extinguisher 6 Kgs. capacity

bearing ISI Mark for Fighting ABC Class of Fire. The Extinguisher

will be Manufactured Strictly as per BIS: 15683:2018 bearing ISI.

a) In built NRV on valve to cross check internal pressure.

b) Operating temperature marking on valve.

c) Automatic safety release valve.

d) Non Returnable Valve

5 Kg Ceiling Mounted Fire Extinguisher Clean Agent HFC, Zero

ODP, Stored PressureType, Pressure Gauge, Gross Weight 7.7

Kg, empty Weight 2.7 Kg, Can Height 267MM, Diameter 230MM,

Discharge Time less than 8 Secs, Auto discharge mechanism on

temperature rise, applicable on Class A,B,C and electrically

started Fire, Can Construction : Valve Construction : Forging &

Machining, Internal Coating of Can : Epoxy Powder coating, Sheet

metal thickness : 1.60 MM For HUB & ISP Rooms

SUB TOTAL - 4,65,070.12

A2 size color Evacuation Plans with photo luminescent printed

with Glass on SS studs (Autoglow EEP2 )

Fire Extinguishers photo luminescent signages-5' From AFFL-

Tringle type right sige image refer

Digitally signed by JAYA

Manual call point signages

Providing and installing in position the following type of sign

boards made out of 3mm thick "Opaque" PVC foam board with

computer cut, PVC non-reflective self adhesive vinyl painted foam

board, complete with mirror fasteners. As per standards. 3M tape

to be used for signages fixing.

Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS

INSTRUCTED OTHERWISE" of 1.5cm height letters in red with

NS-12 white back ground.The size of the board shall be 25cm x 30 cm Nos. 9.00 1,397.56 12,578.03

and shall be fixed at the height of 2 mts. from finished floor near

Manual call points. 3M tape to be used for signages fixing.

Supply and fixing the signages" FIRE ORDER" it should contain

the following matter on 3mm thick "Opaque" PVC foam board of

computerized cut, PVC non-reflective self adhesive vinyl painted

foam board of 3' x 4'. 3M tape to be used for signages fixing.

A) Alert The Security At Security Room By Actuating Manual Call

Point Located At Strategic Locations.

B) Evacuate The Occupants By Using Fire Exits And Emergency

NS-13 Exits Only And Assemble At Various Assembly Poits. Nos. 9.00 759.70 6,837.32

C) If Possible Try To Extinguish The Fire By Using Nearest /

Suitable Portable Extinguisher Or Water From Nearest Wet Riser.

D) Be Calm And Do Not Give Any Room From Panic, Walk, Do

E) If You Encounter Serious Difficulty In Evacuation, Flat And Try

To Attract Attention Of Rescue Team.

SUB TOTAL 70,062.20

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA

COST SUMMERY OF ELECTRICAL WORK

DSR AMOUNT (RS.) NS AMOUNT (RS.)

SUB HEAD-I:CIRCUIT CUM POINT WRING. 19,74,601.27 20,661.82

SUB HEAD-II - FITTINGS & FIXTURES 4,24,862.78 13,24,430.00

SUB HEAD-III - DISTRIBUTION BOARDS 5,34,815.23 -

SUB HEAD-IV -CABLE TRAYS,RACEWAY,JUNCTION

SUB HEAD-V - EARTHING 3,76,433.72 -

SUB HEAD-VI - L.T. CABLES 47,811.28 2,27,459.75

SUB HEAD-VII: UPS SYSTEM - 5,39,938.00

SUB HEAD-VIII:FLOOR PANEL - 7,43,725.00

SUB HEAD-X:DFMD & BAGGAGE SCANNERS. - 20,61,534.00

AUDIO VISUAL SYSTEM CONFERENCE ROOM 50

FIRE ALARM SYSTEM (C) 28,44,974.36 2,27,616.00

NETWORKING SYSTEM (D) 83,83,644.00

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA BHUBANESWAR

BOQ: ELECTRICAL WORKS

including DSR-2022 Amount

Qty RATE (DSR- NS Unit Rate Rs

S.No. Code No. Description of items Unit GST Facor (Rs) NSI Amount (Rs)

SUB HEAD-i:CIRCUIT CUM POINT WRING.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

recessed steel conduit, with modular switch, modular plate, suitable GI box

and earthing the point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required. (Switch Control Primary

DSR-1.3 Points)

Wiring for group controlled (looped) light point/fan point/exhaust fan point/

call bell point (without Independent switch etc.) with 1.5 sq. mm FRLS PVC

DSR-1.54 insulated copper conductor single core cable in surface/ recessed steel

conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc as required. (Switch Control Secondary

MCB CONTROL LIGHT POINTS

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

recessed steel conduit, with modular switch, modular plate, suitable GI box

and earthing the point with 2.5 sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required. (Switch Control Primary

3.1 NSI-1.1 Primary point controlled by one MCB. Point 4 1,535.50 6,142.00

Same as item above but Secondary point. i.e. Points to be looped with Primary

NSI-1.2 point with 2.5 sqmm wire and Point wiring

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4

sq. mm FRLS PVC insulated copper conductor single core cable for loop

DSR 1.5 earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

5 FRLS PVC insulated copper conductor, single core cable in surface/ recessed

DSR 1.7 steel conduit as required.

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular

DSR 1.31 switch, connections etc. as required.

Supply and Wiring for 250 volts single phase and neutral 2 Nos 6 amps socket

outlate with control by 1 No switched with 2.5 sq.mm PVC insulated copper

conductor 1100 volts grade stranded flexible FRLS wires in concealed or

surface mounted 25 mm dia 2mm thick PVC conduit including providing and

7 fixing of 6 amps 3 pin switch socket outlet of aprpoved make and design in 2 Each 2 1,796.31 - 3,592.62

mm thick GI box with grid plate and earthing of third pin of the socket with 2.5

Sq. mm PVC insulated copper conductor stranded flexible FRLS

wire.(maximum four no. of switches socket shall be connected on one

NSI-2 circuit).as required

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A

DSR 1.32 modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/

DSR-1.33 wooden block including connections etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on

surface or in recess i/c providing and fixing 25 amp modular socket outlet and

25 Amps modular SP MCB, “C” curve including connection, painting etc. as

DSR-1.57 required. ( Gysers).as required

Supplying and fixing following modular switch/ socket on the

11 existing modular plate & switch box including connections but

DSR 1.24 excluding modular plate etc. as required.

11.1 DSR 1.24.6 Telephone socket outlet Nos 30 148.00 157.37 4,721.05

Supplying and fixing following size/ modules, GI box alongwith

12 modular base & cover plate for modular switches in recess etc.

DSR 1.27 as required.

Supplying and fixing following modular switch & socket on existing modular

13 base & switch box including connection but excluding modular plate etc. as

DSR 1.24 required.

13.2 DSR 1.24.4 3 pin , 5/6 amps socket outlet Each 60 122.00 129.72 7,783.36

Supplying and fixing following size/ modules, GI box alongwith modular base &

DSR 1.27 cover plate for modular switches in recess etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including cutting the wall and making good the

same in case of recessed

DSR 1.21 conduit as required.

Supplying and fixing of following sizes of of steel conduit along accessories in

surface / recess including painting in case of surface conduit, or cutting the

making good the same in case of recessed as required.

Supplying and drawing following sizes of FRLS PVC insulated copper

15b DSR 1.17 conductor single core cable in the existing surface/ recessed steel/ PVC conduit

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed

16 DSR 1.18 copper conductor, unarmored telephone cable in the existing surface/ recessed

steel/ PVC conduit as required.

Total of Sub-Head - I carried to summary sheet 19,74,601.27 20,661.82

Digitally signed by JAYA

17 NSI-3 SUB HEAD-II - FITTINGS & FIXTURES.

12W, High efficient recess / surface mounted LED round downlighter with

white powder coated, pressure die cast aluminium housing. High transmittivity

PS diffuser provides soft light. CRI>80, IP20, Ambient temp-0 to 45DegC, CCT -

4000/5700K, 50,000 hrs @ L70 life. Driver efficiency>85%, THD<10%,

Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-

Constant Voltage operated driver with range 90-265V AC and Safety Extra Low

Voltage Safe level<60V DC as per IEC standard. as required .

Supply & erection of 20 watt LED Betten Tube Light, 4' long suitable with 40000

burning hours for rated voltage 220-240V AC working range:- 140-270 V A'c , 50

Hz +_ 5%, AC supply with aluminium alloy base,, frosted polycarbonate

diffusers with power factor >0.90, Total Harmonic Distortion (THD) < 20%,

system current - 0.085A, system efficiency > 85% , with operating temp. -10° C

to 45° C, Lumen output for LED tube should be > 2000 lumen and overall

lumen/watt of luminaire should be greater than 80%, C.R.I. of LED>80% with

17.2 NSI-3.2 correlated colour temperature (CCT) of 6500K , minimum burning hour life Each 25 2274.00 56,850.00

>40000 hours,LED viewing angle 120 Degree complete in all respect with the

entire satisfaction of the Engineer-in-incharge. Supply of Industrial General

Purpose 4' long tube fitting suitable to house 1x20w LED tube rod 4' long,

Polycarbonate housing , rated voltage 240 V and Ingress protection IP-20

complete in all respect with the entire satisfaction of the Engineer-in-incharge.

Integral, SMD 2x2 LED, IP 20, 36W LED Recess mounted fixture with System

efficacy of more than 100lm/W and system lumen output 3600lm. Luminaire

shall have satin finished translucence (HET) diffuser for Uniform illumination

and wider light distribution. The LED shall be compliant with LM80-08 standard

with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test

report for LED should be submitted for 10000 hrs of testing). The LEDs used

should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be

Multistage, Isolated type, APFC, Constant Current topology driver with proper

heat sink for heat . as required

Supply installation and Comissioning of Round donut shape suspended LED

light, 25W decorative, corrosion resistant, surface-suspended luminaire.

Housing in Aluminum extrusion heat sink for effective thermal management,

sturdiness and excellent corrosion resistant fitted in white finish. High

transmittance PS diffuser in opal finish for glare free uniform light distribution.

High efficiency long life SMD LED module is mounted on FR4 with lumen

efficacy of >140lm/W to enhance the lumen output. Powered by an integral

isolated low THD electronic LED driver (SMPS based constant current supply)

with output short circuit protection, surge protection. Lumen Output of 2180

NSI-3.4 lumens.CRI >80, Color temperature 4000K, THD <10% and PF >0.90, IP20, Each 40 10,565.00 4,22,600.00

IK03.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45

DEG.C; Input Supply Voltage Range: 140-270 V, Frequency: 50-60 HZ; Internal

Surge Protection: 3 KV; Protection: Reverse Polarity, Open & Short Circuit.

DRIVER SAFETY REQUIREMENT STANDARDS: IS 15885-2-13, TEST

REPORT TO BE SUBMITTED; PHOTO BIOLOGICAL SAFETY NORMS: IS

16108, TEST CERTIFICATE TO BE SUBMITTED; CERTIFICATION: LM 79

FOR LUMINAIRE LM 80 FOR LED SOURCE. Havels Cat Ref: Torus or

Supply, Installation, Testing and Commissioning of double height area 80 W

LED HI Bay , 5700 k IP-66. as required

Supply & erection of 8 Watt LED bollard light , 0.6 mtr, IP66 5700k. as required

Supply of 10 w LED Bulkhead with a nominal system lumen output of 1000

lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have

a rated system lifetime of 25,000 burning hours at L70. The luminaire should

have a color temperature of 5700K and CRI > 80. The luminaire shall meet IP65

rating and IK 08 rating with THD < 20% and PF > 0.9. The luminaire housing

should made of pressure die cast Aluminium with polycarbonate front diffuser.

The total power consumption should not exceed 6.5W (including driver). as

Supply installation and comissioing of 25w Recessed linear 4ft luminaire(50mm

width) made of Aluminum extruded housing in white powder coated finish and

plastic moulded end caps.High transmittance PMMA opal diffuser.High

efficiency long life LED package in integral module with lumen efficacy up to

110 Lm/W and viewing angle of 120° to ensure better uniformity.Powered by an

integral isolated low THD electronic LED driver ( SMPS based constant current

supply) with output short circuit protection, surge protection. Lumen Output of

2700 lumens.CRI >80, Color temperature 5700K, THD <10% and PF

17.4 NSI-3.8 >0.90,IP20,IK03.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO Each 10 8070.00 80,700.00

+45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ;

Internal Surge Protection:3 KV; Protection : Reverse Polarity, Open & Short

Circuit. DRIVER SAFETY REQUIREMENT STANDARDS :IS 15885-2-13, TEST

REPORT TO BE SUBMITTED; PHOTO BIOLOGICAL SAFETY NORMS: IS

16108, TEST CERTIFICATE TO BE SUBMITTED; CERTIFICATION: LM 79

FOR LUMINAIRE LM 80 FOR LED SOURCE. or equivelent.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star

rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of

insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit,

safety rope, copper winding, Power Factor not less than 0.9, Service Value

(CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM+C85

18 DSR 19.1 (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic Each 25 2,730.00 2,902.81 - 72,570.23

regulator unit for speed control and all remaining accessories including safety

pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation

resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as required.

Supplying and fixing two module stepped type electronic fan

19 DSR 1.25 regulator on the existing modular plate switch box including Each 10 369.00 392.36 3,923.58

connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including

wiring the down rods of standard length (upto 30 cm) with 1.5

sq. mm FRLS PVC insulated, copper conductor, single core cable

etc. as required.

Supplying of Plastic Body Ornamental Exhaust Fan heavy duty 230V A.C 50

cycles, 300 mm sweep, 1400 rpm, energy efficient, complete erected in position

with all accessories. Venti Air DS Greaves- Ventilus 250 or equivalent as per

specification. as required.

Supplying and drawing of UTG 4 pair CAT 6 LAN Cable in the existing surface

/ recessed steel / PVC conduit as required.

22 NSI-8 Supply of heavy duty 450mm Wall Fan each 10 6,443.00 64,430.00

Total of Sub-Head - II carried to summary sheet 4,24,862.78 13,24,430.00

SUB HEAD-III - DISTRIBUTION BOARDS.

Supplying and fixing following way, single pole and neutral,

sheet steel, MCB distribution board, 240 V, on surface/ recess,

24 DSR 2.3 complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/RCCB/Isolator)

Digitally signed by JAYA

Supplying and fixing following way, three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess complete with tinned copper

25 DSR 2.4 busbar, neutral busbar, earth bar, din bar, detachable gland plate,

interconnections, phosphatized and powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator)

Supplying and fixing of following ways surface/ recess mounting, vertical

type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly

powder painted, inclusive of 200 A tinned copper bus bar, common neutral link,

26 DSR 2.5 earth bar, din bar for mounting MCBs (but without MCBs and incomer) as

required . (Note :Vertical type MCB TPDB is normally used where 3 phase

outlets are required.)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature

circuit breaker suitable for inductive load of following poles in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

27.2 DSR 2.10.2 Single Pole Neutral Each 0 599 636.92 -

Supplying and fixing following rating, double pole, 240 V, isolator in the existing

28 DSR 2.12 MCB DB complete with connections, testing and commissioning etc. as

Supplying and fixing following rating, four pole, 415 V, isolator in the existing

29 DSR 2.13 MCB DB complete with connections, testing and commissioning etc. as

Supplying and fixing following rating, double pole, (single phase and neutral),

240 V, residual current circuit breaker (RCCB), having a sensitivity current 30

mA in the existing MCB DB complete with connections, testing and

commissioning etc. asrequired.

Supplying and fixing DP sheet steel enclosure on surface/ recess

31 DSR-2.16 along with 25/32 A 240 V "C" curve DP MCB complete with Each 0 1169 1,243.00 -

connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing

MCB DB complete etc. as required.

Total of Sub-Head - III carried to summary sheet 5,34,815.23 -

SUB HEAD-IV - CABLE TRAYS , RACEWAY , JUNCTION BOX.

Supplying and installing following size of perforated pre-painted M.S. cable trays

with perforation not more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with M.S. suspenders including bolts &

nuts, painting suspenders etc as required.

33.1 DSR.4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness Metre. 250 481.70 512.19 1,28,047.90

33.2 DSR.4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre. 350 604.00 642.23 2,24,781.62

33.3 DSR.4.1.3 200 mm width X 50 mm depth X 1.6 mm thickness Metre. 0 689.00 732.61 -

33.4 DSR.4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre. 180 777.00 826.18 1,48,713.14

33.5 DSR.4.1.5 375 mm width X 50 mm depth X 2.0 mm thickness Metre. 0 1,015.00 1,079.25 -

33.6 DSR.4.1.6 450 mm width X 50 mm depth X 2.0 mm thickness Metre. 0 1,137.00 1,208.97 -

33.7 DSR.4.1.7 600 mm width X 50 mm depth X 2.0 mm thickness Metre. 0 1,366.00 1,452.47 -

Supports, bends, access boxes, tap off boxes and cross over as per site

requirement. (overhead / wall mounted recovery & junction boxes shall be 2.0

NSI-9 mm thick). The pregalvenised sheet shall be as per IS 277 or BS 2989 having

tensile strength of minimum 500 N/sq.m. and minimum zinc coating of 275

Supplying, installation, testing & commissioning of Race way made from

minimum 2.0 mm thick GI raceway, factory fabricated, with internal partition of

the following sizes including providing removable double folded cover of 2.0 mm

thick , knock out holes and fixing accessories & coupling, earthing stud for

terminating 8 SWG copper earth wire complete as required

34.1 NSI 9.1 75 mm wide x38 mm deep in ceiling/floor Metre. 200 528.00 1,05,600.00

34.2 NSI 9.2 100 mm wide x38 mm deep in ceiling/floor Metre. 100 624.00 62,400.00

34.3 NSI 9.3 150 mm wide x38 mm deep in ceiling/floor Metre. 50 822.00 41,100.00

34.5 NSI 9.4 225 mm wide x38 mm deep in ceiling/floor Metre. 60 1115.00 66,900.00

34.6 NSI 9.5 300 mm wide x38 mm deep in ceiling/floor Metre. 50 1409.00 70,450.00

Supplying, installation, testing & commissioning of floor/ceiling recessed 2 mm

thick pregavanised sheet outlet junction box including providing cover with

provision to adjust overall height, knock outs on four sides to accept raceways

of specified sizes and cutouts to fix required outlets for following size of race

ways with painted GI plate ( Colour as approved Architect/Consultant).as

Total of Sub-Head - IV carried to summary sheet 5,01,542.66 3,89,030.00

SUB HEAD-V - EARTHING.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including

accessories, and providing masonary enclosure with cover plate having locking

arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke

and salt as required.

Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including

accesssories, and providing masonary enclosure with cover plate (CI heavy

duty) having locking arrangement and watering pipe pipe of 2.7 mtr long etc.

with charcoal or coke and salt) as required.

Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from

38 DSR 5.11 earth electrode, including connection with G.I. nut, bolt, spring, washer Mtr 50 706.00 750.69 37,534.49

excavation and refilling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for

39 DSR-5.14 connections etc. as required. 2 nos used for 50 x 5 for the Neutral earthing of Mtr 50 1,162.00 1,235.55 61,777.73

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for

connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop

earthing etc. as required.

Supplying, fixing, testing and commissioning of following bare Copper/ GI flat

including all necessary fixing accessories and effecting connections.

Digitally signed by JAYA

42.1 NSI-11.1 50 mm x 6 mm thick Cu flat Metre 0 2,350.00 -

42.2 NSI-11.2 50 mm x 6 m thick GI flat Metre 0 420.00 -

Supply and laying medium class GI pipe under road/paved areas/wall crossing

43 NSI-12 etc. including earth excavations refilling, ramming and making good as

43.1 NSI-12.1 150 mm dia GI pipe Class B Metre 0 1,600.00 -

Total of Sub-Head - V carried to summary sheet -

SUB HEAD-VI - L.T. CABLES , TERMINATION & LAYING .

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire

44 NSI-13 Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-

7098 Code and technical specifications.as required

44.2 NSI-13.16 16 sq. mm 4 core (FRLS Copper armoured Cable) Mtr. 20 914.00 18,280.00

44.4 NSI-13.17 10 sq. mm 4 core (FRLS Copper armoured Cable) Mtr. 40 624.00 24,960.00

44.3 NSI-13.18 6 sq. mm 4 core (FRLS Copper armoured Cable) Mtr. 50 381.00 19,050.00

Supplying and making end termination with brass compression gland and

aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE

aluminium conductor cable of 1.1 KV grade

Supplying and drawing co-axial TV cable RG-6 grade. 0.7 mm solid copper

conductor PE insulated , shielded with fine tined copper braid and protected with

PVC sheath in the existing surface / recessed steel / PVC conduit as required.

Total of Sub-Head - VI carried to summary sheet 47,811.28 2,27,459.75

46 NSI-14 SUB HEAD-VII: UPS SYSTEM

46.1 20 KVA UPS WITH 30 MINUTES BATTERY BACKUP.

20KVA Conventional Online UPS

Supplying, installation, Testing & Commissioning of ON LINE UPS

,Uninterruptible Power Supply (UPS) system suitable for parallel operation, to

power a load of approximately rated KVA non-linear load. The individual UPS

modules shall include a Rectifier, inverter, battery bank ( separate item) any

other peripherals required for paralleling the individual UPS system and Static

Bypass switch. any other peripherals required. Provision should be available for Nos. 2 2,27,359.00 4,54,718.00

manual bypass also. The UPS systems offered are to be of the latest technology

with Digital Control Microprocessor based, for reliable operation, using IGBT's

both in the rectifier & inverter. The quality of design, manufacturing and

inspection process should confirm to the relevant Inter-national standards such

SITC of 12V/42AH Battery Type AMF, VRLA, ABS Controller, Maintenance Free

Total of Sub-Head - VII carried to summary sheet. 5,39,938.00

47 NS15 SUB HEAD-VIII:FLOOR PANEL.

Supplying, installing, testing & commissioning of following type

compartmentalised wall mounted / floor mounted cubicle board made from

2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated

inclusive of suitable size 4 strip Al. Busbar complete with interconnection

providing Lugs, inter-earthing, painting etc. i/c providing & fixing below noted

Receiving,unloading,storing, handling, installation, testing and commissioning

of following MV Switchboards complete as required and as per site condition

and dimension of all panels shall be carried out as per the attachad sld.as

Incomer 320A 4P Mannual changeover - 1no Nos 1 239379.0 2,39,379.00

Incomer 320A 4P MCCB - 1no

Busber - 450A Aluminium

R,Y,B Indication Lamp - 3nos

320A Digital Multifunction Meter - 1no

320/5 CT - 3nos

Body - 1.6mm Powder Coated.

Wall/Floor Mounted - Top & Bottom Entry

63A 4P MCB - 3nos

40A 4P MCB - 3nos

32A 4P MCB - 2nos

10/16A SP MCB - 10nos

200A 4P MCCB - 1no

160A 4P MCCB - 1no

48 NSI-16 VTPN ACDB Fabricated type Wall mounted (GROUND Floor)

Incomer - 200A 4P MCCB - 1no Nos 1 143473.0 1,43,473.00

Busber - 250A Aluminium

R,Y,B Indication Lamp - 3nos

200A Digital Multifunction Meter - 1no

200/5 CT - 3nos

Body - 1.6mm Powder Coated.

Wall/Floor Mounted - Top & Bottom Entry

63A 4P MCB - 7nos

10/16A SP MCB - 40nos

49 NSI-17 VTPN ACDB Fabricated type Wall mounted (FIRST Floor)

AS PER SINGLE LINE DIAGRAM Nos 3 120291.0 3,60,873.00

Incomer - 160A 4P MCCB - 1no

Digitally signed by JAYA

Busber - 250A Aluminium

R,Y,B Indication Lamp - 3nos

160A Digital Multifunction Meter - 1no

160/5 CT - 3nos

Body - 1.6mm Powder Coated.

Wall/Floor Mounted - Top & Bottom Entry

63A 4P MCB - 3nos

40A 4P MCB - 5nos

10/16A SP MCB - 20nos

Total of Sub-Head - VIII carried to summary sheet. - 7,43,725.00

SUB HEAD-X:DFMD & BAGGAGE SCANNERS.

52.00 NSI-20 DOOR FRAME METAL DETECTOR.

Supply ,installation ,testing & commissioing of 9 Zone or above door frame

NSI-20.1 metal detector normal size :- 760 mm (w) x 2050 mm (H) X 700 mm (D) loaded Each 1 246082 246082

necessary software.as required.

53.00 NSI-21 BAGGAGE SCANNERS.

Supply ,installation ,testing & commissioing of baggage scanners big : computer

based multi energy x-Ray baggage inspection system capable of passing

NSI-21.1 though bag / parcels of dimension 540 mm (w) x 350 mm (H) With belt height - Each 1 1815452 1815452

750 mm - 850 mm with 22''/24'' LCD inpout/output rollers etc. as required.

Total of Sub-Head - X carried to summary sheet. 20,61,534.00

Digitally signed by JAYA

NBCC (INDIA) LIMITED

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE,

NBCC IMPERIA BHUBANESWAR

COST SUMMARY: AV System

SL NO. DESCRIPTION Amount(INR)

AV System in Conference Room - 50 Seater, 1

GRAND TOTAL 87,64,132.00

GRAND TOTAL 87,64,132.00

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA BHUBANESWAR

Audio Visual System in Conference Room ( 50 seater )

S.No. Item Description Qty Unit Unit Rate (Rs.)

50 Seater Conference Room (1nos.)

1.0 Supply, Installation , Testing & Commissioning of 86'' diagonal LED Panel, UHD Resolution, wide color gamut

panel, LED backlight, Haze : 1% or better, landscape/portrait, wide array of inputs, 400 nit brightness, Built in

Speaker(10W x 2), fan-less LCD design, Control: LAN/HDMI, RS232 Control with accessories.as required 2 Nos. 6,28,104.00 12,56,208.00

2.0 Supply Installation Testing & Commissioning of Video Conference Systems having Dual 4K, 120-degree and 70

degree HFOV camera, Two way stereo with bass speaker, touch control, 2 No. display support, USB device

mode, Zoom rooms, Microsoft Teams, Google Meet, built in apps, Standards-based (h.323 and sip) video, Group

framing, speaker framing and people framing, add-on microphone with accessories. Microsoft Teams Rooms / 1 Nos 15,29,938.00 15,29,938.00

Zoom Rooms / Other cloud vendor licenses should be provided by the client complete etc as required at site.as

3.0 Supply Installation Testing & Commissioning of of Cable Manager, table mount modular multi-Connection

Solution with inputs for 2 HDMI/VGA active input plate, 2 LAN/USB, 2 Universal AC Power Outlet , etc.as

4.0 Supply, Installation, Testing & Commissioning of 8x8 HDMI matrix switchers for computer and video signals at

resolutions up to 4K/60 with 4:4:4 color sampling. It should support HDMI 2.0 specifications, including data rates

up to 16 Gbps, HDR, HD lossless audio formats. The HDCP 2.3-compliant matrix switchers incorporate HDMI

input equalization and output regeneration, to ensure reliable system operation. as required

5.0 SITC of HDMI Transmitter over Cat 6/6A ( HDBaseT) up to 50m with Input 1 HDMI, Cat6 (HDBaseT) Output, 2K

and 4K support, HDTV Compatible, HDCP 2.2 Compliant with CEC, IR and RS-232, Compliance : CE, ISO 9001,

ISO 14001, OHSAS 18001, etc complete as required.

6.0 SITC of HDMI Receiver over Cat 6/6A ( HDBaseT) up to 50m with Inputs 1 Cat6 (HDBaseT), 1 HDMI Output, 2K

and 4K support, HDTV Compatible, HDCP 2.2 Compliant with IR and RS-232, Compliance : CE, ISO 9001, ISO

14001, OHSAS 18001, etc complete as required.

7.0 Supply Installation Testing & Commissioning of Full HD Ceiling mounted PTZ Camera, Sony image sensor,

1/2.8" 2MP CMOS or better, 256 or more preset positions, 12x Zoom, Resolution:1080p or better, S/N ratio: 50

dB or better,Pan angle:+/-160 deg or more. Horizontal Viewing angle: 65deg or more.,supports PoE, Auto

Focus, VISCA / VISCAIP camera Control protocol, Triple Streaming, Output:1x HDMI / 3G-SDI, Compression: 2 Nos 2,64,359.00 5,28,718.00

H.264, RS 232/Ethernet/USB3.0 control, DC In:12V with accessories .as required

8.0 Supply, Installation, testing & Commissioning of Recording & Streaming devices that high-quality, Full HD

synchronized recording, standard RTSP streams, storage & Content management system integration, Supports 4

HDMI Inputs and IP video sources , Video compression: H.264/AVC 4:2:0 8bit color, and standard RTSP

streams, 1 female RJ-45, Layout switch: Single, PIP, PBP, 3 layouts, Supports 1080p 60/30fps video recording.

Built-in 1TB HDD storage.as required

9.0 Supply, Installation,Testing & Commissioning of iPad,Apple iOS 8; 9.7-Inch Retina Display; 2048x1536

Resolution A8X Chip with 64-bit Architecture; M8 Motion Coprocessor Wi-Fi (802.11a/b/g/n/ac); 32 GB Capacity

8 MP iSight Camera; FaceTime HD Camera Up to 10 Hours of Battery Life.as required

10.0 An integrationSoftware to integrate the Controller with an Apple Ipad An Application to enable any Apple mobile

devices to transform into a fully functional touch panel to seamlessly communicate with the Control processor

Voice Control - Using Speech-to-Text and Text-to-Speech functionality within application, allows you to talk to 0 Nos. 71,146.00 -

your control system and have it talk to you with additional features.as required

11.0 SITC of Control System should be equipped with at least 8 bidirectional RS-232 serial ports, at least 8 IR ports,

at least 8 Digital I/O ports, at least 8 low voltage relays for controlling room functions, at least 1 Ethernet

monitoring and control port, Rack mounting (1U), It should have minimum 1 license each included for both iOS & 1 Nos. 3,43,769.00 3,43,769.00

Android application & accessories

12.0 SITC of Wi-Fi Router with 2.4 GHz WLAN, WPS, 5 GHz WLAN, 4 LAN ports , Should have reset button & power

switch, Should be 802.11ac Wi- Fi specification, WPA/WPA2 encryption to secure your wireless traffic, etc.as

13.0 Supply, Installation, Testing & Commissioning of Speaker with below Specifications:- Transducer Size : 8" Co-

axial Loudspeaker, Coaxial Driver + 1 x 1-inch compression driver, HF Power Handling : 60 Watts Continuous

Freq. Response : 54 Hz - 20 kHz Dispersion : 135°Conical Sensitivity : 90dB Max SPL : 115dB continuous.as 8 Nos 21,893.00 1,75,144.00

14.0 Supply, Installation, Testing & Commissioning of Power Amplifier with below Specifications:-

digital power amplifier, class-D, RMS power : 2 X 350watt, Frequency Response : 50 Hz - 22 kHz, Signal / Noise

: > 100 dB, THD+N : < 0.3%, Crosstalk : < 80 dB, Power Supply : Switching mode, Common mode rejection ratio

: 70dB, Protection : DC Short circuit; Over heating; Over load; Signal limiting, built in temperature controlled fan

15.0 Supply Installation Testing and Commissioning of digital signal processor with builtin Dante, minimum 4 no. Or

more Mic / line input with phantom power and AEC and 8 or more line output, at least 1 channel of USB input and

output for software Video Conferencing, Should be expandable for port expansion, if required. or more, Shall

have Built-in filters, feedback suppression, AGC etc complete as required as per specifications.as required

16.0 Supply of Chairman Conference Unit, Output frequency response 50-16000Hz, Earphone load >16 Ω, Earphone

volume 10 mV, Earphone output φ 3.5mm stereo jack, Max. power consumption 1.65W, Connection Cat 5 or 7P-

DIN dedicated cable with buckle, Inbuilt Speaker can be muted.as required

17.0 Supply of Delegate Conference Unit, Output frequency response 50-16000Hz, Earphone Load >16 Ω, Earphone

volume 10 mV, Earphone Output φ 3.5mm stereo jack, Max. power consumption 1.65 W, Connection Cat 5 or 7P-

DIN dedicated cable with buckle, Inbuilt Speaker Can be muted.as required

18.0 Supply of Digital Conference System Controller, Supply voltage AC110Vor AC220V (default settings), Max

conference microphones 800 (60 Without Additional Power Supply), Frequency response 20-20000Hz, Signal-to-

noise ratio >80dBA, Dynamic range >85dB, Audio crosstalk >70dB, Total harmonic distortion <0.05% Original 1 Nos 2,46,765.00 2,46,765.00

input: 6.3 mm balanced Signal strength: 0.775 V.as required

19.0 Supply of Power Expansion Kit to extend 48V phantom power to more than 72 chairman (BCS 1C) / delegate

(BCS1D) units.as required 1 Nos 99,754.00 99,754.00

20.0 Supply, laying of Cables, convertor and accessories like HDMI Cables, HDMI Patch Cord, Microphone Cable,

Speaker Cable, CAT6A cable various type of connector as required

21.0 Supply, Installation , Testing & Commissioning of 55'' diagonal LED Panel, UHD Resolution, wide color gamut

panel, LED backlight, Haze : 1% or better, landscape/portrait, wide array of inputs, 350 nit brightness, Built in

Speaker(10W x 2), fan-less LCD design, Control: LAN/HDMI, RS232 Control with accessories.as required 3 Nos 62,835.00 1,88,505.00

Digitally signed by JAYA

S/I/T/C of Small Form Factor MINI Desktop with i5, 512GB SSD, 1TB 7200 RPM HDD, 16 GB RAM, Win 11 OS

and MSO & Wilreless Keyboard & Mouse and Monitor Technology;- IPS,LED Backlit Monitor Size 1 Nos 61,360.00 61,360.00

(INCHES)23.8,Monitor Resolution (PIXELS)1920x1080 complete with all required accessories.

23.0 S/I/T/C of Full-Motion TV Wall Mount Swivel Bracket for 55" Displays Full-motion adjustment allows maximum

flexibility — +3°~-15° tilting, +60°~-60°swiveling and +3°~-3° screen leveling TV for optimal viewing from any 2 Nos 2,832.00 5,664.00

seat in a room.

S/I/T/C of Full Motion TV-Wall Mounting Kit for 86 Display with Heavy-duty swiveling arms for TVs up to 120kg;

Steel Material; quick-release mechanism; Free-Tilting; VESA compatible size (mm): 200x200,300x200,

25.0 Popup box with 2nos 6A Socket with 1no 6A switch,1 port HDMI, 1LAN port, 1voice port (A&H Meyer)

26.0 Supply and fixing of 24U Floor Stand (600W x 800D) UL certified rack with Multi hollow extrusion Aluminium

profile frame, Top and bottom cover with provision of either brush cable entry or cable entry holes with rubber

grommets, Front single door with Glass/ Mesh and rear double door with mesh, Static load bearing capacity of

Upto 1200KG., confirming to following standards - IEC EN 60529, IEC EN 62262, ISO 9001:2008, ISO 14001:

2015, ISO 45001: 2018, Salt spray test according to ISO 9227 (NSS test) for 250 Hours, Colour - Combination of 1 Nos 62,456.00 62,456.00

RAL 7037 (For frame) & RAL 7035 (For other parts) with fine texture, Rack including accessories like Horizontal

PDU, Metal Cable manager, Hardware packet and Monitor Shelf etc. should be from same OEM.as required

Total (Conference Room - 50 Seater) 87,64,132.00

Digitally signed by JAYA

NBCC (INDIA) LIMITED

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA

Sl.No. DESCRIPTION DSR (AMOUNT) TOTAL

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA BHUBANESWAR

BOQ: FIRE ALARM & PA WORKS

DSR SUB HEAD - VII: FIRE ALARM & DETECTION SYSTEM & PA RATE (DSR- DSR Amount NS

65 Unit Qty including GST Facor( NSI Rate

2022 SYSTEM 2022) (Rs.) Amount(Rs.)

Supplying, installation, testing and commissioning of micro

processor based intelligent addressable main fire alarm panel,

central processing unit with the following loop modules and

capable of supporting not less than 240 devices (including

detectors) and minimum 120 detectors per loop and loop length

up to 2 km, network communication card, minimum 320

character graphics/ LCD display with touch screen or other

keypad and minimum 4000 events history log in the non volatile

memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48

65.1 hrs back-up with 24 volt sealed maintenance free batteries with

automatic charger. The panel shall have facility to connect

printer to printout log and facility to have seamless integration

with analog/digital voice evacuation system (which is part of the

schedule of work under SH: PA System) and shall be complete

with all accessories . The panel shall be compatible for IBMS

system with open protocol BACnet/ Modbus over IP complete

as per specifications.

Supplying, installation, testing & commissioning of central

graphical fire alarm management system to centrally monitor

and operate the fire alarm system complete as required.

Supplying, installation, testing & commissioning of repeater

panel wih 320 character/ Touch screen LCD display with inbuilt

65.3 reset, acknowledge and silence switches complete as required.

Supplying, installation, testing & commissioning of intelligent

65.4 analog addressable photothermal detector complete with

17.2.4 mounting base complete as required. Each 50 2,428.30 2,582.01 129100.6981

Supplying, installation, testing & commissioning of response

indicator on surface/recessed MS Box having two LED, metallic

cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator

17.2.7 complete with base as required. Each 20 3,181.80 3,383.21 67664.20677

Supplying, installation, testing & commissioning of intelligent

addressable thermal detector with rate of rise cum fixed

temperature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable

65.8 fire control module complete as required.

Supplying, installation, testing & commissioning of addressable

17.2.11 phone control module complete as required. Each 25 3181.80 3,383.21 84580.25846

Supplying, installation, testing & commissioning of intelligent

65.1 addressable duct detector including suitable Photo detector

17.2.13 complete with base as required. Each 2 8149.39 8,665.25 17330.49824

Supplying, installation, testing & commissioning of addressable

17.2.14 manual call point complete as required. Each 12 3645.44 3,876.20 46514.40749

Supplying, installation, testing & commissioning of addressable

65.12 horn cum strobe complete as required.

Supplying, installation, testing & commissioning of fire fighter

telephone handset complete as required. 5,117.39 30,704.36

Supplying, installation, testing & commissioning of fire fighter

phone jack complete as required. 2,300.31 13801.83136

Supplying & laying of 2x1.5 sqmm fire survival armoured cable,

600/1000V rated with annealed copper conductor having glass

mica fire barrier tape covered by an extruded layer of Cross

Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH

inner bedding, steel wire armouring & LSZH outer sheath

17.5.1 complete as required. Metre 1200 350.40 372.58 447096.384

66 PUBLIC ADDRESS SYSTEM

Supplying, installation, testing & commissioning of 6 zone, voice

alarm controller with USB, MP3 player (including 6 zone button

66.1 paging station) with seamless integration facility with main fire

alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W

ceiling speaker complete as required. 962.19 2,79,034.73

Supplying, installation, testing & commissioning of 1.5/3/6W

66.3 metal box ceiling/wall speakers complete as required.

Supply installation, Testing & Commissioning of RMS 480w

Power amplifier, battery voltage 24Vdc (max. 10% deviation)

66.4 Frequency response 60Hz to 15kHz (+1/-3dB) Inputs XLR &

Phone Jack, SIN >85dB, as per detailed technical specification

MR-10.2 etc as required. Each 3 75872.00 227616

Digitally signed by JAYA

Supplying, installation, testing & commissioning of Voice

66.5 command keypad 6 zone, with microphone assembly complete

Supplying and drawing of cable Fire Retardant PVC insulated

copper conductor cable in the existing surface / recessed steel

66.6 conduit of following pairs, cores and size including connections

and interconnections etc. as required.

66.6.1 17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm Metre 2900 47.50 50.51 1,46,469.58

Supplying and fixing of following sizes of steel conduit along

with accessories in surface/recess including painting in case of

66.7 surface conduit, or cutting the wall and making good the same

in case of recessed conduit as required.

Total of Sub-Head - VII carried to summary sheet 2844974.359 227616

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA

IT NETWORKING (ACTIVE + PASSIVE)

SL. NOS. DESCRIPTION Amount(INR)

1 IT NETWORKING (ACTIVE + PASSIVE) 83,83,644.00

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA BHUBANESWAR

BOQ: NETWORKING (ACTIVE + PASSIVE)

S.No Items Descriptions Unit Qty DSR Rate NSI Rate DSR AMOUNT NSI Amount

1 SITC of CAT6A UTP Cable 23 AWG complete in all respect as required. Mtr 5000 117.00 5,85,000.00

SITC of CAT6A UTP 24 port jack panel Loaded (Data/Voice)complete in all

respect as required.

SITC of CAT6A UTP Information outlet jack with dust cover for Data/Voice

6 SITC of CAT6A UTP single port face plate complete in all respect as required. Each 20 305.00 6,100.00

SITC of CAT6A UTP duplex port face plate complete in all respect as

SITC of CAT6A UTP Patch Cords 1 Meter Complete in all respect as

required.(Data)

SITC of CAT6A UTP Patch Cords 2 Meter Complete in all respect as required.

12 SITC of 6 Core OFC multimode 50 micron OM3 in all respect as required. Mtr 50 217.00 10,850.00

13 SITC of pigtail LC/SC 1 Meter OM3 Complete in all respect as required. Each 20 559.00 11,180.00

14 SITC of 24 port LIU loaded complete in all respect as required. Each 10 30,707.00 3,07,070.00

15 SITC of Duplex Fiber Patch Cord (3 Mtr) Each 25 5,457.00 1,36,425.00

SITC of Floor Standing Network/Server Rack - 42U / 800w / 800d, with

Heavy Duty Extruded Aluminium Frame for rigidity. Top cover with FHU

provision. Top & Bottom cover with cable entry gland plates. Two pairs of

19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs.

With a Overall Weight Carrying Capicity of 500Kgs. Side Panels -

42U/800d Front MS Door Perforated honeycomb 42U/800w Rear MS

Door Split Perforated honeycomb 42U/800wFan 90CFM 230V AC, 4” dia

Castors with Brake (set of 4) Vertical Cable manager 80mmW 42U Shelf,

Stationery 700mm N/W PDU 12Sockets 5/15Amps with MCB Mounting

Hardware (Pkt. Of 20) earthing Kit 150mmH Cable manager 1U MS with

Loops complete in all respect.

SITC of Floor Standing Network Rack - 24U / 600w / 800d, with Heavy duty

complete all respects

18 SITC of 2 MP Indoor Dome CCTV Camera complete with License Nos. 40 12,924.00 5,16,960.00

SITC of 32-ch IP camera NVR, complete with License & technical Support for

20 SITC of 2x 8TB HDD for CCTV CAM Nos. 3 53,851.00 1,61,553.00

21 SITC of 55" LED Display for CCTV CAM Nos. 2 95,377.00 1,90,754.00

SITC of Univerge Business Communication Server Model NEC SV9100 (OR

22 Equivalent as per approved makes) Equipped with 08 Digital Extensions and Nos. 1 8,51,053.00 8,51,053.00

296 Analogue Extensions ( IPABX) complete with License

SITC of IP Telephone Model No. NEC ITK-24CG-1P (OR Equivalent as per

23 approved makes) with 3 line LCD display and 24 Programmable Keys with Nos. 4 22,744.00 90,976.00

BLF ( IP Telephone) complete with License

SITC of Digital Telephone Model No. NEC DTK-12D-1P (OR Equivalent as

24 per approved makes) with 3 line LCD display and 12 Programmable Keys with Nos. 5 18,342.00 91,710.00

BLF ( IP Telephone) complete with License

SITC of Digital Telephone Model No. NEC DTK-6D-1P (OR Equivalent as per

25 approved makes) with 3 line LCD display and 6 Programmable Keys with BLF Nos. 20 14,673.00 2,93,460.00

( IP Telephone) complete with License

26 SITC of Analog Phones Nos 100 1,247.00 1,24,700.00

SITC of CORE SWITCH 48-port PoE+, 4 x 10G, CISCO Catalyst Network

27 Essentials (OR Equivalent as per approved makes) with 3 Year Warranty Nos 1 7,18,937.00 7,18,937.00

complete with License

SITC of Layer 2 POE 48-port switches, CISCO Catalyst Network Essentials

28 (OR Equivalent as per approved makes) with 3 Year Warranty complete with Nos 1 4,97,781.00 4,97,781.00

SITC of Layer 2 POE 24-port switches, CISCO Catalyst Network Essentials

29 (OR Equivalent as per approved makes) with 3 Year Warranty complete with Nos 2 2,32,639.00 4,65,278.00

SITC of ROUTER CUM FIRE WALL, CISCO Catalyst Network Essentials (OR

30 Equivalent as per approved makes) with 3 Year Warranty complete with Nos 1 15,65,600.00 15,65,600.00

31 SITC of 10GBASE-LR SFP Module. Nos 35 14,452.00 5,05,820.00

Total Amount 83,83,644.00

Total Amount 83,83,644.00

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC

IMPERIA BHUBANESWAR

Scheduled Item / DSR

Non-Scheduled Item

S. NO. DESCRIPTION 2022/ 2025 (Amount

A. EQUIPMENTS: 8277972 0

C. AIR DISTRIBUTION: 637180 213510

D. ELECTRICAL EQUIPMENTS: 0 482678

GRAND TOTAL 12341351

GRAND TOTAL 12341351

Digitally signed by JAYA

NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT ED OFFICE, NBCC IMPERIA BHUBANESWAR

BOQ: HVAC SYSTEM

Rate Non-Scheduled

Non-Schedule/ Rate Scheduled Item

S. No. Description Unit Qty. including GST Item

DSR-2025/2022 Items (Rs.) (Amount Rs.)

Factor (Amount Rs.)

A. EQUIPMENTS:

Variable Refrigerant Volume / Flow Air-conditioning System

(Heating & Cooling both)

Supply,Installation,Testing & Commissioning of modular type Variable

Refrigerant Flow/Variable Refrigerant Volume air cooled outdoor units

suitable for cooling and heating both, having all hermetically sealed

inverter type Scroll Compressor ,microprocessor based Controller, top

discharge type condensing unit(s), with R-410A Refrigerant,vibration

isolators,with suitable foundation etc. complete as required.The unit

shall deliver the rated capacity at 39 Deg C AHRI Conditions and work

even at 53°C ambient temperature without tripping.The unit shall be

suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power

supply.The compressor and VRF should be of same make, The

condensor fins should have anti corrosive and hydrophyllic coating from

factory having certification from third party ( TUV) . The unit shall be

filled with first charge of the refrigerant and ready for use as required.

The VRF system shall have free phase technology, which shall correct

phases automatically in case of phase reversal.

2 DSR(2025)-8.7 Hi Wall Units

Supply, installation, testing and commissioning of following minimum

capacity VRV/VRF High wall type Indoor unit equipped with washable

synthetic media pre-filter, fan section with low noise fan/dynamically

balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cordless remote control,

drain pan, necessary accessories etc., suitable for operation on 230 V ±

10%, 50 Hz, single phase AC supply, complete as required. The unit

shall have automatic force shut down provision in case of fire on

receiving signal from BMS System. The cooling capacity of indoor unit

will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

3 INDOOR UNIT-CASSETTE TYPE

Supply,installation,testing and commissioning offollowing minimum

capacity 4way flow VRV/VRF Cassette Type Indoor ceiling mounted

unit equipped with synthetic wash

ablemediaprefilter,fansectionwithlownoisefan/dynamicallybalancedblowe

r,multispeedmotor,coilsectionwithDXCoppercoil,electronicexpansionvalv

e,outercabinet,drainpump,grill,necessarysupports,vibrationisolation,cordl

essremotecontroletc.,suitableforoperationonsinglephase230V±10%,50H

zACsupply,complete,asrequired.Theunitshallhaveautomaticforceshutdo

wnprovisionincaseoffireonreceivingsignalfromB+C36MSSystem.Thecool

ingcapacityofindoorunitwillbeatairinletconditionsof27DegreeCDBand19D

egreeCWB temperature.

Digitally signed by JAYA

3 INDOOR UNIT-DUCTABLE TYPE

Supply,installation, testing and commissioning of following minimum

capacity and external static VRF/VRV ceiling mounted ductable type

Indoor unit equipped with washable synthetic media pre-filter, fan

section with low noise fan/dynamically balanced blower, multispeed

motor,coil section with DX copper coil, electronic expansion valve,

DSR(2025)-8.9 outer cabinet, vibration isolators, drain pan, other necessary supports

etc., suitable for operation on single phase AC supply 230 V ± 10%, 50

Hz complete as required. The unit shall have automatic force shut

down provision in case of fire on receiveing signal from BMS

System..The cooling capacity of indoor unit will be at air inlet conditions

of 27 Degree C DB and 19 Degree C WB temperature.

Mid static ductable units (minimum 30 to 48 pascal external static

High static ductable units (minimum 49 to 77 pascal external static

High static ductable units (minimum 78 pascal external static pressure)

TOTAL CARRIED TO SUMMERY A 8277972.00 0

Supply, installation, testing & commissioning Refrigerant 'Y'/ T/ multi

4 DSR(2025)-8.12 Joint required for distribution of refrigerant in copper piping etc. complete

as per specifications.Same as per selected VRV OEM.

DSR(2025)-8.12.1 Indoor Units Nos 72 4971.00 357912

DSR(2025)-8.12.2 Outdoor Multi Joints Nos 15 8877.00 133155

SITC of wireless remote controller with receiver for VRF/VRV individual

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn

copper refrigerant piping for VRV/VRF system, complete with fittings,

with suitable adjustable ring type hanger supports, jointing/brazing

including accessories. Copper Pipe Copper Pipe insulated with Facotry

5 DSR(2025)-8.17 Laminated 7mill glasscloth on closed cell elastometric nitrile rubber

tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines.All accessories as per specifications etc. as

6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19

mm thick insulation

31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19

mm thick insulation

34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19

mm thick insulation

38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19

mm thick insulation

41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19

mm thick insulation

Digitally signed by JAYA

Providing & fixing control cum transmission wiring of 2 core x 1.5 sqmm

copper in cable tray with refrigerant piping between indoor units and

outdoor units and indoor units and wired controllers.As per selected

VRV OEM Complete in all respect as required at site.

CONDENSATE DRAIN PIPING

Supply & installation, testing and commissioning of Rigid heavy class

PVC piping complete with fittings, supports as per specifications and

duly insulated with 6 mm thick nitrile rubber tubular insulation with

factory laminated GC cloth.

TOTAL CARRIED TO SUMMERY B 2377478.00 352533.01

C. AIR DISTRIBUTION:

8 DSR(2022)-16.12 DUCTING:

Supply, installation, balancing and commissioning of factory fabricated

GSS sheet metal rectangular/round ducting 120 GSM complete with

neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,

supports etc. Make:Projtech,Ductofab,Rolastar,Crystal Air System,as

per approved drawings and specifications of following sheet thickness

complete as required.

8.2 DSR(2022)-16.12.1.1 Thickness 0.63 mm sheet (24 Guage) Sq.m 0 1083 1152 0

8.3 DSR(2022)-16.12.1.2 Thickness 0.80 mm sheet (22 Guage) Sq.m 0 1263 1343 0

8.4 DSR(2022)-16.12.1.3 Thickness 1.00 mm sheet (20 Guage) Sq.m 0 1381 1468 0

8.5 DSR(2022)-16.12.1.4 Thickness 1.25 mm sheet (18 Guage) Sq.m 0 1836 1952 0

Supply, installation, balancing and commissioning of fabricated at site

GSS sheet metal rectangular/round ducting 120 GSM complete with

8.6 DSR(2022)-16.12.2 neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,

supports etc. ,Crystal Air System,as per approved drawings and

specifications of following sheet thickness complete as required.

Note- 1. All hanging and support of ducts and ceiling suspended

units shall be with Hangers & Supports of complete with end

fixing in accordance with the approved shop drawings and as

required by the specifications.

Supply, installation, testing and commissioning of GI volume control duct

9 DSR(2022)-16.13 damper complete with neoprene rubber gaskets, nuts, bolts, screws Sq.m 6 7046 7492 44952.07

linkages, flanges etc, as per specifications.

Supplying & fixing of powder coated extruded aluminium Supply Air

Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium

11 DSR(2022)-16.16 Return/Exhaust Air Grills with louvers but without volume control Sqmt 7 5910 6284 43988.72

dampers as per specifications.

Supplying, fixing testing commissioning of supply air diffusers of powder

coated aluminium with aluminium volume control dampers with anti

smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder

13 DSR(2022)-16.18 coated aluminium without volume control dampers with anti smudge ring Sq.m 7 8121 8635 60445.42

& removable core.

Digitally signed by JAYA

Supplying,Fixing,testing and commissioning of fire dampers of at least

1½ hour fire rating as per UL555/1995 tested by CBRI/AMCA,in supply

air duct/main branch and return air path as and where required of

required sizes, i/c control wiring,the damper shall be motorized and

spring return so as to close the damper in the event of power failure

automatically and open the same in case of power being restored. The

spring return action shall be inbuilt mechanism and not externally

mounted. The damper shall also be closed in the event of fire

signal.Damper blades shall be airfoil shaped (equivalent to 2.3mm

thickness strength) roll formed using 0.8mm thick single piece of

galvanized sheet.Fire damper shall be equipped with a electric limit

switch to indicate open and close position of the damper blades.The

dampers shall meet the requirements of NFPA90A, 92A and 92B and

shall be classified by AMCA Leakage Class 1 smoke damper in

accordance with UL- 555 & UL-555S certified motorized combined

smoke & fire damper of 90 mins rating.Each fire/smoke damper shall be

AMCA licensed and bear the AMCA seal for air Performance. Pressure

drop shall not exceed 7.5Pa when tested at 300m/min face velocity on

600x600mm size damper.Actuator shall be UL listed complete as

required and as per specifications.

14.2 DSR(2022)-16.20.2 Control Panel with actuator & Wiring Each 0 9948 10578 0.00

Supplying and fixing of following thickness duly laminated aluminum foil

of mat finish closed cell Nitrile rubber (Class "O") insulation on existing

15 DSR(2022)-16.23 duct after applying suitable adhesive for Nitrile rubber. The joints shall

be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber

tape insulation complete as per specifications and as required.

15.1 DSR(2022)-16.23.1 19 mm thickness insulation (For Supply & Return air duct) Sq.m 100 754 801.73 75400.00

15.2 DSR(2022)-16.23.2 25 mm thickness insulation (For TFA Ducts) Sq.m 0 968 0

DSR-2022 -4.6 MS Cable Trays

Supplying and installing following size of perforated Hot

DippedGalvanised Iron cable tray (galvanisation thickness not less than

50 microns) with perforation not m+C125ore than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with G.I.

suspenders including G.I. bolts & nuts, etc. as required.

4.6.1 100 mm width X 50 mm depth X 1.6 mm thickness Metre 55 669 711.35 39124.12

4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 45 716 761.32 34259.53

4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 10 963 1023.96 10239.58

Supply, installation, testing and commissioning of opposed blade

aluminium volume control dampers with black mat finish in supply air

duct collars (for grilles),Damper shall be with 16G GSS/Aluminium body

and blades shall be with aluminium airfoil construction. complete with

16 NS-3 neoprene rubber gaskets,nuts, bolts, screws linkages, flanges etc. as Sq.m 5 13096 65480

per approved shop drawings and specifications.

Supply, fabrication, installation and testing the flexible connections

17 NS-4 constructed of fire resistance flexible double canvas sleeve,with Sq.m 5 6163 30814

resistoflex cloth as per the approved shop drawings.

18 NS-5 Louver

Supplying, installing and testing of Fresh Air powder coated Anodized

extruded aluminium construction fresh air louvers (40 mm deep) (Fresh

air louver with aluminium VCD , bird screen & rattle-free)complete as

per specification.

Supplying, installing and testing of Exhaust Air powder coated Anodized

extruded aluminium construction fresh air louvers (40 mm deep) (Fresh

air louver without VCD , bird screen & rattle-free) complete as per

Supply, installation testing and commissioning of duct acoustic insulation

Inside the Duct with Engineered Nitrile Rubber open cell foam with

antimicrobial properties to be applied using manufacturer's

recommended Rubber+C147 based Adhesive in a blend of solvents.

18.4 NS-5.3.1 10 mm thick duct acoustic lining Sq.m 7 1029 7200

Supply, installation, testing & commissioning of thermal insulated

flexible ductStrapping the flexible duct connections with flexible duct

strap ties following sizes duly supported at regular interval as per site

requirement etc. complete as required as per specifications.

Digitally signed by JAYA

TOTAL CARRIED TO SUMMERY C 637179.67 213510.05

D. ELECTRICAL EQUIPMENTS:

Supply, installation, testing and commissioning of Main Smart

centralized controller / manager digital type of latest generation for

VRV/VRF system for controlling all the indoor & outdoor units installed in

building with adapters (for connecting additional indoor units, cost for the

same is deemed to be included in this item) with On / Off, touch screen

DSR(2025)-8.16 and Temparature Controls, fan speed, scheduling, air flow direction each 0 97768 0

setting, operation history etc. The controller should be compatible with

automation system (Bacnet/IP) with all accessories. It should be

complete as per manufacturing standards & as per directions of

Engineer-in-charge.

Supplying, installing, testing and commissioning of INLINE FANS

suitable for installing in any position in vertical or horizontal ducts.

The casing shall be double skin, internally acoustically lined and

constructed of galvanised steel. The fan shall be DIDW with

forward curve impeller fitted with maintenance free external

NS-6 rotor motor and electrical Panel if required. The motor shall be

suitable for 220±10% volt single phase 50 cycles AC supply. All

units shall be complete with duct flexible connector and volume

control damper.

i Toilet exhaust Fan 600CFM No. 4 50513 202052

ii Toilet exhaust Fan 350 CFM Nos. 6 46771 280626

TOTAL CARRIED TO SUMMERY D 0 482678

Digitally signed by JAYA