REPAIR TO DRAINS, FOOTPATH, FENCING / SECURITY WALLS ETC IN THE AREA OF AGE B/R-I UNDER GE GWALIOR

Amount

M&L Surface dressing n.exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and as directed.

M & L for cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for angle iron posts and struts in fencing including cutting tops to shape (swan neck) or as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work including 40x6mm flat iron for holding chain link fencing conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Mild steel round bars Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 5 to 10 mm dia mild steel screw bolts, with hexogonal or square at one end and srewd the other or screwd both ends each screwd end to be fitted with washer and one hexogonal or square length exc 5cm and n. exc 10 cm complete all as specified and as directed.

M&L preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation or new steel and iron surfaces of any description and applying one coat of red oxide primer complete all as specified and directed.

Fixing only galvanised chain link fencing of 4mm dia GI wire including line wire standards rails straining bolts etc including provision of binding wire and mesh size as per direction of GE Gwalior & complete all as specified and as directed.

Supply only galvanised chain link fencing of 4mm dia GI wire including line wire standards rails straining bolts etc including provision of binding wire and mesh size as per direction of GE Gwalior & complete all as specified and as directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, post holes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out etc as in any type of soil complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built incement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified and directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan, exc 6m mean radius, (except bricks) built in cement mortar 1:4 complete all as specified and as directed.

M&L PCC 1:3:6 type C-1 (using 20mm grade stone aggregate) as in surface channel, foundation filling,wall coping, and mass concrete etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls, /RCC walls surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 15 mm thick rendering on Brick masonry or other than fair faces of brick wall For External CM 1:6 finished even and fair without using extra cement, complete all as specified and directed

M&L for 15 mm thick rendering on Brick masonry or other than fair faces of brick wall For External CM 1:4 finished even and fair without using extra cement, complete all as specified and directed

M&L for two coats of cement base paint on new plastered surfaces complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

Removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Removing excavated material exc 250 mtr but n.exc 500 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed

Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L hard core of for broken stone boulder of gage n.exc 63mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M & L for 100mm Cement concrete 1:4:8 type D- 2 (40mm graded stone aggregate) complete all as specified and directed.

Providing and laying 60mm thick laquer finish (ISI Marked) factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Providing and laying 80mm thick laquer finish (ISI Marked) factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed

M&L preparation or new concrete surfaces of any description and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

M&L preparation of old concrete surfaces of any description and applying one coats of plastic emulsion paint complete all as specified and directed.

S&F 600 mm dia Reinforced concrete pipes, class NP3, for drain, culvert etc laid and jointed complete with collars complete all as specified and as directed.

M/S SANJAY AGARWAL (BID ID -3508594)

M/s Subhash Construction Co. (BID ID -3508495)

M/S YOGANSH CONSTRUCTION CO. (BID ID -3508354)

M.S. ENGINEERS (BID ID -3508582)

M/s KGN Builders (BID ID -3507412)

K.S. CONSTRUCTION (BID ID -3508856)