SPECIAL REPAIRS/ MAINTENANCE TO ELECTRIC SUPPLY AND WATER INSTALLATIONS IN ARMY AREA AT UDAIPUR MILITARY STATION

Amount

Taking down carefully aluminium point wiring complete concealed, connected to walls/including fittings/fixtures complete removing and making good the disturbed surface of walls/ceiling as per existing etc for the point wiring

Material & Labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade drawn through including PVC casing caping with all accessories fixed on the surface of Wall/ roof/ceiling / dash fasteners/ wooden gutties and cadmium plated screws as per IS on existing sunk type CI/GI Steel terminal boxes with 3 mm thick laminated sheet concealed in wall etc. including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly for :-

(a) One light point controlled by one 5 Amps SP switch

(b) One fan point controlled by one 5 Amps SP switch

(c) One 5 pin 5 Amps socket outlet on same board

(d) One 5 Pin 5 Amps socket outlet on independent board

(f) One light point controlled by two 2-way switch

(g) One power point with 2.5 sqmm copper conductor including 2.5 sqmm unsheathed copper continuity conductor connected to common earth dolly and controlled by one 15 Amp switch

Supply & Fixing switch piano type, flush button single pole, one way 5 amps complete all as specified and directed.

Supply & Fixing switch piano type, flush button single pole, two way 5 amps complete all as specified and directed.

Supply & Fixing switch piano flush button, 15 Amps, single pole one way complete all as specified and directed.

Material & Labour socket outlet 5 amps, 5 Pin, flush type complete all as specified and directed.

Material & Labour socket outlet 2 in 1 ,3 pin, 5 Amps and 15 Amps flush type complete all as specified and directed.

Supply & Fixing inreplacement of for ceiling rose, surface type bakelite 65 x 50 mm three terminal complete all as specified and directed.

Supply & Fixing inreplacement of lamp holder , insulated body cord grip pattern suitable fixing on wall/ pendant fittings

Supply & Fixing inreplacement of ceiling fan regulator step up type 230 volts suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed.

Disconnecting electric connections and taking down old unserviceable main switches/ DB’s sheet metal enclorsures 02 ways, 4 ways, 8 ways/ duly fitted with MCB’s/ cutouts 32 amps capacity including unserviceable wooden boards and making good the disturbed surface of the wall/ceiling.

Supply & Fixing MCB distribution box single door powder coated sheet metal encloser 240 volts SPN including 200 amps rated bus bar of the following type :-

(b) 08 ways

(c) 04 ways

Supply & Fixing MCB distribution box single door powder coated sheet metal encloser 415 volts TPN 4way including 200 amps rated bus bar all as specified and directed by Engr-in-charge.

Supply & Fixing of MCB SPN in the DBs catered above of the following ratings :-

(a) MCB TPN 63Amp

(b) MCB SPN 40 to 63 Amp

(c) MCB SP 6 to 32 Amp

Disconnecting of unserviceable sub main wiring/Service connection of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.

Material & Labour for Submain wiring with two run of single core 4 Sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of earth continuity conductor with 4.0 sqmm multi stranded copper conductor cable all as specified and directed . Note :- Two run of single core cable and one run of earth continuity conductor and one metre of conduit shall be measured as one unit.

Material & Labour for Renewal of Earthing complete as per electrical plate No 5 of MES SSR Part I with galvanised Steel plate earth electrode 600mm x 600mm x 6mm buried directly in ground in a earth pit of depth not less than 2.25 meter below ground level , the top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to galvanised iron or steel earth lead wire 4 mm dia as earth lead by means of bolts, nuts and washers of GI & steel earth lead protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe with funnel on upper side shall be 20 mm dia GI medium grade including excavation and earth work in any type of soil, PCC pit, CI frame , CI cover 10mm thick with hinged to CI frame complete.

Note :-(i) Irrespective of what is shown in electrical plate , the concrete pit shall be in PCC 1:3:6 type C-1 and 40 mm thick pre-cast Cover slab of RCC 1:2:4 type B1 using 20 mm Graded stone aggregate with suitable handle. (ii) Items includes the cost of GI pipe for protection of earth strip including earth lead up to7.5 meter. Each 01

Taking down old Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front side openable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door ,IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 600x500x200mm all as speceified & directed by Engr-in- charge. Note :-- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item.

Taking down old U/S exhaust fan and supply and fixing PVC exhaust fan of size 200mm sweep with louver 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed.

Supply & Fixing Bollard type LED Light fittings ground grouting type Round shaped with integrated electronic driver cap 9 watt Make - Crompton/Havells/ Philips/Jaquar

Supply & fixing LED integrated batten tube light fittings 20/22 Watt 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed.

Supply & fixing LED security light luminaries of 25 watt for energy saving having IP-65 degree of protection made of pressure die cast aluminum housing and heat resistant thoughned glass with excellent thermal management, LED's should have better optics and uniform distribution of light including GI tubing 40mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 2 Nos with nut and bolt and washers including connecting complete including 1.5 sqmm stranded copper conductor of suitable length as per direction and approved by Engr-in-charge, Make: Crompton or equivalent to phillips/Bajaj

Material & Labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq mm 2core in PVC conduits for fixing Bollard lights

Material & Labour for painting in sub station no-1 & Pump house no-2 and STP Plant with 2 coats of Oil Paint on wall, letter writing with desired colour and make of paint of size 5 feet x 3 feet on walls. Note : Description of writing details i;e scale, colour and font of Letters and Sketch shall be given by Engr - in- charge

Material and labour preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of approved shade & quality complete all as specified and directed.

Material and labour Preparation of old painted steel or iron based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of approved shade & quality complete all as specified and directed.

Material and labour for applying 1 mm thick Birla/JK wall care white putty in two layers white wall care putty on complete removal of existing treatment externl or internal walls complete all as specified and directed.

Material and labour two coat of exterior emulsion paint white or tinted on walls or fascia of roof or chajjas on prepared putty surfaces of bldg bldgs complete all as specified & directed. Note : Make :-Asian Paints (Brand-Ace)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)

Taking down cement plaster from brick walls ,chajja, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc upto 9 mtr ht complete all as specified and as directed.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces or stone walls bldgs in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified.

Material and labour for applying two coats of distempering with acrylic distemper white or coloured on prepared wall surfaces (putty) or old decorated surfaces complete all as specified and directed.

Supply only liquid water proofing compound, ISI marked complete all as specified and directed.

M/s Ajay kumar Garge

M/s K R and Sons