Renovation and upgradation of computer centre by providing pre painted sheet roofing, PVC ceiling plastering internal and external painting and white washing including PH and electrical work in HP University, Shimla-5

Amount

Providing and fixing suspended false ceiling Megastar, classic make PVC decorative ceiling panel of required shade size 3.02 m x0.30mx 7.00mm to 9.00mm thick made of light weight, high intensity, heat insulated flame, corrode and age resistant with no aspiration, non impenetrable by insects or termites, resistant to weather ,special chemicals, water proof and washable and of artistic feuse, including fixing of panels in lining direct to lerick /RCC/Stone/partition walls in horizontally or vertically pattern as requirement with but /tunged and grooved pointing with necessary nylon rawl plugs /fasterners fixed either with drill machine or scews at suitable /required distances including providing and fixing suitable filler /binder/corner beading/ULT jointer of 25mmx25mm x3.02mm as per site condition and requirement to fill up the gaps of corners, walls and ceiling and for making boarders. including making good the damaged surface if any complete in all respects and as per architectural drawing and as per the direction of Engineer- in -charge.

15 mm cement plaster in single coat on rough side of Brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80 mm in girth and finished even and smooth. a) Cement Mortar 1:4 (1 cement mortar : 4 sand )

b) Cement Mortar 1:6 (1 cement mortar : 6 sand )

Repair to plaster in patches of 2.50 Sqm. And under and 10 to 15mm thick including cutting the patch n proper shape and replastring the surface of the wall including disposal of rubbish to the dumping ground within a lead of 20 metre with: a) Cement Mortar 1:4

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position: a) 2nd class deodar wood.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enameled iron butt hinges with necessary screws: a) 35 mm thick 2nd class deodar wood.

b) 40mm thick i) 2nd class deodar wood.

Providing and fixing Wire Gauge Shutters using galvanized M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screws. a) 40 mm thick 2nd class deodar wood.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. a)150x10 mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. a) 125 mm

Distempering (one coat) with oil bound washable distemper of approved brand and manufacture and of required shade ,on decorated wall surfaces to give an even shade, after thoroughly brushing the surface clean of all grease dirt loose pieces of scales and also including preparing the surface even and sand papered smooth.

Distempering (two coat) with oil bound washable distemper of approved brand and manufacture and of required shade, on undecorated wall surfaces to give an even shade, over And including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. priming coat with distemper

Painting one coat (excluding priming coat) on previously painted concrete/masonry/plastered surface with ready mixed paint/brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required with a) Paint other than white/ white paint

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. a) Ready mixed paint brushing wood primer pink.

Painting two coat (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping. a) With enamel paint other than white/ white paint.

Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint to give and even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping. a) With enamel paint other than white/ white paint.

Painting one coat (excluding priming coat) on previously painted steel and other metal surface with enamel paint brushing to give an even shade including cleaning the surface of dirt, dust and other foreign matter. a) With enamel paint other than white/white paint.

Polishing one coats with French polish on previously polished wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust, and sand papered smooth and including a coat of wood filler.

Finishing wall with weather proof exterior grade emulsion of approved design(Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete.

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within all lead and lifts. a) G.I. Sheet roofing

Dismantling steel work upto span of 10 metres and a height of 5 metres in built up sectional in angles, tees, flats and channels including all gusset plates, bolts, nuts, beading etc. and stacking the materials within 20 metres lead. a) Including dismembering.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of red lead paint. a) In beams joists channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like. i) Quantity to be arranged by the contractor

b) Quantity to be supplied by the deptt. at labour rate

Providing and fixing M.S. B.P. Sheet 1.66mm to 2mm thick in eaves board /fascia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instructions of Engineer-in-charge. (Base members of steel work shall be measured and paid separately).

Half brick (2nd class) masonry using common burnt clay building bricks in a)Cement mortar 1:3 (1 cement: 3 sand).Second class bricks

b) Cement mortar 1:4 (1 cement: 4 sand).Second class bricks

Providing and fixing 0.60mm thick pre-painted steel sheet (Tata or Jindal) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with pre-painted iron J or L hooks, bolts and nuts 6mm dia. metre with pre-painted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing Scaffolding for all kind of works in multistory building upto all floor height/level bamboo complete tiled with rope on joints and pedestal of CGI Sheet etc. In all respect including carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge.

2mm thick PVC/rubber tiles flooring plain, coloured, corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treatmemnt to be measured separately for payment.

Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (frame work for base to be measured & paid for separately) a) 12mm thick

Providing 50X50X50 mm wooden plugs including cutting bricks/stone work and fixing in cement mortar 1:3(1 Cement:3 sand and making good the walls etc. a) 2nd class deodar wood.

Providing and fixing veneered 12mm thick imported decorative pine wood lining/skirting with decorative surface on one face with tounged and grooved jointing and screws etc.complete (frame work and cover fillets to be measured and paid for separately.

Polishing two coats with French polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler.

Providing and fixing of 1288 mm x 196 mm x 8mm thick PERGO laminated wooden flooring (family group) class-31 having wear resistance AC-3 grade with interlocked/tounged and groved joint and laid over exiting floor (conc./wooden including cushioning material as per specification & as per director of Engineer-in-charge.

Providing and Fixing moulding having wear resistance level with pressure laminate surface treated for scratch resistance on top of a Medium density moisture resistant fabric board suitable for floor between 7 mm to 12 mm with length of 2185 mm x 43 mm space matching with floor complete in all respect as per direction of Engineer-in –Charge.

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc. complete and stacking them within 20 metres lead. a.) Not exceeding 3 sq.m in area

Demolition above G.L.upto floor two level including disposal of unserviceable materials within all lead.ad lifts . a.) Un-reinforced cement concrete upto 15cm Thickness.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in: a.) Foundation and plinth:

Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in: a) Foundation and plinth.

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts etc. Complete. (a) 250X16 mm

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with :- a) Ready mixed primer

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths s ides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. a.) Pick & Jumper Work.

Excavation in drains and channels etc. in earth work including dressing of side and bed and disposing of excavated earth upto a lead of 20 metres and lift upto 1.50 metres disposed earth to be levelled and neatly dressed: a.) Pick & Jumper Work.

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand:6 graded stone aggregate 20mm nominal size.

Coloured glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3(1 cement :3 sand) and jointed with cement slurry.

Providing and fixing 10mm thick anti skid water proof stain and impact resistant heavy duty vetrified tiles Nitco or equivalent 300x300mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement: 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. a) .110 mm dia.

Providing and fixing PVC Single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive complete. a) 110 mm dia.

Providing and fixing PVC door bend with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive complete. a) 110 mm dia.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive complete. a) 110 mm dia.

Providing and fixing PVC offset 45 degree ISI marked including fixing with approved adhesive complete. a) 110 mm dia.

Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etc. complete. a.) 110mmx90mm

Providing and fixing vitreous china wash down water closet ( European Type W.C. pan) with integral ‘p’or ‘S’trap including jointing the trap with soil pipe in cement mortar 1;1 (1 cement : 1 sand )(Seat and ver to be measured and paid for separately ) i ) Angle Indian university closet.

Providing and fixing plastic seat cover ( Solid /hollow type ) and cover for wash down water closet with C.P brass hinges and rubber buffers . Hollow type a) Black or white plastic seat and cover.

Providing and fixing PTMT coloured/white high density polyethylene/poly propylene 10 litres capacity full flush European standard control low level Double siphon flushing cistern of CERA or HINDWARE make with fittings, with a pair of brackets and fittings such as lead valve, siphon, 15mm nominal size PVC ball valve with polythene float, with push button, coupling for connections with inlet, outlet and over flow pipe , 40 mm dia C. P. flush bend including holes in walls and making good the same and connecting the flush bend with cistern and closet ( over flow pipe to be measured and paid for separately).

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painting white including cutting holes and making good the same excluding fitting. a) Flat back i) 550mmx 400mm

Providing and fixing vitreous China pedestral for wash basin complete recessed at the back for the reception of pipes and fittings

Providing and fixing C.P. brass waste for wash basin or sink. i) 32mm dia.

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixing to wooden plugs with C.P. brass screws and washers.

Providing and fixing C.P. brass Towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws. i) 600mmx20mm.

Providing and fixing PTMT smart shelf of approved quality and colour with steel screws and rawl plugs etc. complete.

Providing and Fixing PTMT soap dish of approved quality and colour with steel screws and rawl plugs etc. complete.

Providing an Fixing PTMT jet spray of approved quality and colour with 1.5 mtr tube

Providing and fixing : (i) C.P. brass bib tap with Capstan Head.

(ii) C.P. brass pillar tap with Capstan Head a) 15mm dia.

Providing and fixing C.P. brass angle valve (a) 15 mm dia. without nut and pipe.

Providing and fixing P.V.C connection with brass union: (a) 300/450mm length: (i) 15mm nominal bor

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. a) 100 mm dia.

Providing and fixing brass full way valve with wheel: a.) 15mm nominal bore.

Providing and fixing to wall ceiling and floors galvanized mild steel tubes (Medium grade) tube fittings and clamps including good the wall, ceiling and floors:- a) 15mm nominal bore.

68Providing and fixing G.I./M.I. Union of following size (where not included in the items: a) 15mm nominal bore.

Providing and fixing PTMT grating round of approved quality and colour 100mm nominal size.

Construction of manhole with R.C.C. top slab in 1:2:4 mix in (1cement:2 sand: 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1cement: 4 sand :8 graded stone aggregate 40mm nominal size) in side plaster 15mm thick with cement mortar 1:3( 1cement :3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement :2 sand: 4 graded stone aggregate 20 mm nominal size) finished smooth complete including curing and testing: i) with inside size 800mm x 800 mm and 750 mm deep including C.I. cover with frame light duty single seal pattern -1) 455mmx 610mm internal dimension total weight of cover and frame to be not less than 38 kg (weight of cover 23kg and weight of cover 15 kg).With 200mm thick walls of brick masonry using common brunt clay building bricks in cement mortar 1:3 (1cement :3 Sand).

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white P.V.C. automatic flushing cistern with fittings, standard size C.P. brass flush pipe spreaders with union and clamps (all in C.P. brass) with waste fittings as per I.S. 2556, C.I. trap with outlet grating and other coupling in C.P. brass including painting of fittings and cutting and making good the wall and floors wherever are required complete in all respects.

Providing and fixing straight P.V.C. waste pipe for wash basin or sink of following size: (a.) 32mm nominal size.

Providing and fixing PVC water storage tank of ISI : marked G.I inlet and outlet connections , 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to heights above ground level a) 500 Ltrs. net capacity

Providing and fixing P.G.I. Lid with triangular P.G.I thorns of 0.63 mm thick sheet at top on existing P.V.C tank with hasps and staples for locking arrangement.

Electrical Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group-C

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps , socket out let and 5/6amps, piano type switch, connections, Painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing brass batten/angle holder including connections etc. as required:-

Supplying and fixing 5A to 32 A rating, 240/ 415 V, 10 KA C curve, miniature circuit breaker suitable for inductive load of following, pole in the existing MCB DB complete with connections testing and commissioning etc. as required. Single pole

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface/recess complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification cables interconnections, phosphatized and powder painted, including earthing etc. as required:- a) 8 way, double door

b) 12 way, double door

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a)40 Amps.Cat-A

63 Amps.Cat-A

Supplying and fixing of 20 watt new decorative LED batten with elegent and streak design offers high brightness on surface. Including connections a) Wiring for circuit/ submain wiring alongwith earth wire with

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan. Making good the damages, connections, testing and commissioning etc. as required a) Ex-Fan, light duty, (Domestic) 200 mm sweep.

b) Ex-Fan, Heavy duty, 300 mm sweep

Wiring for circuit/ submain wiring alongwith earth wire with the following size of FRLS PVC / insulated copper conductor, single core cable in surface. recessed medium class PVC conduit as required. a) 2 x 1.5 Sq.mm. + 1 X 1.5 mm Sq. earth wire

b) 2 x 4 Sq.mm. + 1 X 4 mm Sq. earth wire

c) 4 x 4 Sq.mm + 2 X 4 Sq. mm earth wire

d) 2 x 10 Sq. mm + 1 X 6 Sq mm. earth wire

e) 2 x 16 Sq. mm + 1 X 6 Sq mm. earth wire

Providing and fixing following capacity TP & N disconnector duse switch unit inside the existing panel board with ISI marked HRC fuse including drilling holes in cubical panel, making connections etc as required. 315 A TP & N

Sanjay Govt. Contractor (BID ID -554250)

yashmeen kaur (BID ID -554095)

AJAY SHARMA (BID ID -553928)

RISHI KUMAR TUTANIEA (BID ID -553925)

SUDHEER THAKUR (BID ID -553505)