KMGSD

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1500 mm ( PWD/ Bldg/ SOR 2017 / It - 1/ pg - 1)

Removal of unserviceable soil including excavation,loading and disposal upto 1000 metres lead but loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per Technical Specification Clause 302.3.11 for Rural Roads of MORD. (Mode of measurement: pre works and post works)

Artificial Hillock : 10 m base dia x 2.50 m high with slope Construction of Embankment with Material Obtained from Borrow pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 for Rural Roads of MORD. (Mode of measurement: pre works and post works)

Supplying and stacking of good earth (adequate for horticulture work) at site including royalty (earth measured in stack will be reduced by 20% for payment)

Supplying and stacking sludge (adequate for Horticulture work) at site in dry cake form from approved disposal work site including royalty, all lead and lift etc. (Sludge measured in stack will be reduced by 8%).

Spreading of sludge, dump manure,/farm yard manure/animel dung manure and good earth in required thickness. This includes supply of labour, tools & plants excluding materials.

(a) Planting permanent hedges including digging of trenches Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart.

maintanance of hedge for one year

planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground mixing the soil withdecayed farm yeards/sludge/manure, planting the sapling backfilling the trench watering, fixing the tree guard@ 4 mtr c/c and maintanance the plant for one year

Supplying and Planting of different plant / trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height including all leads & lift, carriage, handling, manuring, applying presticide and fertilizer etc. (PWD / building / SOR 2017 / It- 9 / pg- 261-262) Furcaria veriegated 10-12 leaves in height 20-30cm in earthen pots of size 25cm.

Duranta healthy plant of big size

Bougainvillea (mix variety) of height 30cm-90cm in polybag of size 10cm-15cm.

Bougainvillea (mix variety) of height 30cm-90cm in earthen pots of size 20cm.

Bougainvillea (name variety, bushy plants, full bloom) of height 90cm-60cm in cement pots of size 30cm.

Croton (broad leaves) 3-5 branches of height 90cm- 120cm in cement pots of size 30cm.

Croton different varieties of height 30 cm to 90 cm in earthen pots of size 20 cm.

Hibiscus Rosa Sinensis of height 90 cm to 60 cm in earthen pots of size 20 cm.

Brick edging 75 mm wide with picked jhama bricks, laid true to line and level including cutting necessary trench in soil or in hard metalled surface, laying the bricks and repacking the trench (on both side of the edging) with spoils and ramming the same thoroughly complete as per direction.. (b) Brick-on-end edging (250 mm) depth. (PWD / building / SOR 2017 / It- 3 / pg- 227) for Hedging

For Avenue Tree

For Small plant

(b) Maintenance of flowering plants and shurbs in central verge for one year

Surface dressing of ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m. as directed.

Supply fitting and fixing Boundary Pillars as per type design IRC-25 1969 with cement concrete 1:2:4 with stone chips including cost of providing 2 nos. of 6 mm dia M.S. rods of length 1.84 m in the form of inverted U-Shape as main reinforcements placed crosswise to each other and 5 nos. of round shaped 6 mm dia M.S. rods used as binders; the placing of 1st binder should be at 75mm below the top finished surface and the other 4 nos. of binders should be placed at 1.85mm C/C and to be of 90 cm. long with 20cm dia at the base tapering to 15cm dia at the top with head properly round and sunk inscriptions (as directed) at the side with 60cm embedment into the ground after making hole in the ground of size 50cm x 50cm x 75cm and repacking the hole properly with cement conc. 1:4:8 with stone chips and finishing the exposed portion of 30cm length with white wash & painting the inscription as directed including carriage of the post to the site with loading & unloading etc. complete in all respect. With Pakur variety stone chips. @ 2 m c/c

CGST 9% + SGST @9%