Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.5 LAccepted-AOC 1001 63 SHALIMAR GARDEN ISMAILGANJ NEAR INDIRA NAGAR SECTOR 08 CROSSING LUCKNOW 226016 | LUCKNOW | UTTAR PRADESH | 226016 | L1 | Accepted-AOC being the lowest | |
| 2 | L2₹11.1 L+₹2.2 L (25.4%)Rejected-Finance OLD NO 2C NEW NO 7 1 THANGAVELU VAITHIYAR STREET CORPORATION MIDDLE SCHOOL TRIPLICANE CHENNAI 600005 | CHENNAI | TAMIL NADU | 600005 | L2 | Rejected-Finance not being the lowest | |
| 3 | L3₹11.3 L+₹2.5 L (27.9%)Rejected-Finance OLD NO 338 NEW NO 17 19TH NEDUMANEHLIAN STREET G K M COLONY CHENNAI 600 082 | CHENNAI | CHENNAI | TAMIL NADU | 600082 | L3 | Rejected-Finance not being the lowest | |
| 4 | L4₹11.9 L+₹3.1 L (35.3%)Rejected-Finance 53 13 A OUTER CIRCULAR ROAD KILPAUK GARDEN COLONY CHENNAI 600 010 | CHENNAI | CHENNAI | TAMIL NADU | 600010 | L4 | Rejected-Finance not being the lowest | |
| 5 | L5₹13.0 L+₹4.2 L (47.2%)Rejected-Finance NO 42 SIVAN STREET SRI VENKATESAPERUMAL NAGAR VALASARAVAKKAM CHENNAI 600087 | CHENNAI | CHENNAI | TAMIL NADU | 600087 | L5 | Rejected-Finance not being the lowest |
| Sl No | Description | Qty | Unit | M/s.Sai Agency L4 | SWIFTTECH ENGINEERS INDIA PVT LIMITED L5 | NAVEEN ENTERPRIESES L2 | GK ENTERPRISES L3 | RK ENTERPRISES L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Labour only for lifting and taking out the sewage submersible pump set and motor of capacity 20 to 25 HP including column pipe by dismantling nut bolt washers and rubber packing etc including disconnecting of submersible cable complete from the sewage sump /well and lowering back the pump after repairing /removing the sludge from the pump including making electrical connection with the existing panel /starter and connecting the complete the column pipe assembly with nut bolts, washers/ packing to the existing header without any leakage complete all as directed.
Note :- Rate are deemed to be inclusive for jointing of Submersible Cable , reconnecting the delivery pipe line of submersible pump sets , testing for satisfactory running. | 15 | Each Job | 3,500 ₹52,500 | 3,000 ₹45,000 | 4,000 ₹60,000 | 2,860 ₹42,900 | 1,800 ₹27,000 Lowest |
| 2.00 | All as per item No. 1 described here in before but of capacity 10 HP to 15 HP complete all as specified and as directed . | 15 | Each Job | 2,701 ₹40,515 | 3,000 ₹45,000 | 2,000 ₹30,000 | 1,578 ₹23,670 | 1,300 ₹19,500 Lowest |
| 3.00 | All as per item No. 1 described here in before but of capacity 2 HP to 7.5 HP complete all as specified and as directed . | 15 | Each Job | 1,106 ₹16,590 | 3,000 ₹45,000 | 950 ₹14,250 | 890 ₹13,350 Lowest | 900 ₹13,500 |
| 4.00 | M&L for rewinding of Submersible non clog sewage motor by taking out burnt copper winding, cleaning the casing & slots with wire brush & washing with pressure water & shall be dried , rewinding the motor using required gauge of super enameled copper winding wire, varnishing and stamping and overhauling etc. Making the winding leak proof & taking out the electric connection with suitable size of submersible cable up to 03 Meter, Capacity of motor 25 HP complete all as specified and as directed .
Note: Quoted rates are inclusive of removing and refixing of motor | 3 | Each Job | 22,004 ₹66,012 | 5,000 ₹15,000 Lowest | 21,000 ₹63,000 | 15,900 ₹47,700 | 16,000 ₹48,000 |
| 5.00 | All as per Item No 4 but 12.5 HP Capacity | 6 | Each Job | 14,003 ₹84,018 | 5,000 ₹30,000 Lowest | 13,750 ₹82,500 | 11,780 ₹70,680 | 11,000 ₹66,000 |
| 6.00 | All as per Item No 4 but 10 HP Capacity | 8 | Each Job | 11,006 ₹88,048 | 5,000 ₹40,000 Lowest | 10,000 ₹80,000 | 9,150 ₹73,200 | 9,000 ₹72,000 |
| 7.00 | All as per Item No 4 but 7.5 HP Capacity | 8 | Each Job | 11,006 ₹88,048 | 5,000 ₹40,000 Lowest | 9,500 ₹76,000 | 8,200 ₹65,600 | 6,000 ₹48,000 |
| 8.00 | All as per Item No 4 but 5 HP Capacity | 6 | Each Job | 9,000 ₹54,000 | 5,000 ₹30,000 Lowest | 8,345 ₹50,070 | 7,700 ₹46,200 | 5,000 ₹30,000 Lowest |
| 9.00 | All as per Item No 4 but 2 HP Capacity | 6 | Each Job | 6,002 ₹36,012 | 5,000 ₹30,000 | 5,500 ₹33,000 | 5,200 ₹31,200 | 2,000 ₹12,000 Lowest |
| 10.00 | M&L for repairing and testing of pump centrifugal/non clogging upto 25 HP of any make and type including welding work, rotor turning and balancing, re-metaling of shaft bush bearing, keys, mechanincal seal, SS shaft impeller and other such accessories etc required to make pump functional and testing on load complete all as specified and as directed .
Note: Quoted rates are inclusive of removing and refixing of motor | 4 | Each Job | 10,007 ₹40,028 | 5,000 ₹20,000 | 9,200 ₹36,800 | 6,800 ₹27,200 | 3,000 ₹12,000 Lowest |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
20 Dec 2025, 6:55 pmClosed
GE Chennai
GE Chennai 600 009
REPAIR/MAINT OF SEWAGE PUMP/ PANELS AND ALLIED WORKS UNDER GE CHENNAI
2025_MES_742187_1
8817/E8
Open Tender
Civil Works
Item Rate
90 days
GE Chennai
As per tender
7 documents required · 7 mandatory
₹500
GE Chennai
₹30,000
Yes
2 Feb 2026
29 Nov 2025
27 Dec 2025
29 Nov 2025
20 Dec 2025
13 Dec 2025
Amount
Labour only for lifting and taking out the sewage submersible pump set and motor of capacity 20 to 25 HP including column pipe by dismantling nut bolt washers and rubber packing etc including disconnecting of submersible cable complete from the sewage sump /well and lowering back the pump after repairing /removing the sludge from the pump including making electrical connection with the existing panel /starter and connecting the complete the column pipe assembly with nut bolts, washers/ packing to the existing header without any leakage complete all as directed. Note :- Rate are deemed to be inclusive for jointing of Submersible Cable , reconnecting the delivery pipe line of submersible pump sets , testing for satisfactory running.
All as per item No. 1 described here in before but of capacity 10 HP to 15 HP complete all as specified and as directed .
All as per item No. 1 described here in before but of capacity 2 HP to 7.5 HP complete all as specified and as directed .
M&L for rewinding of Submersible non clog sewage motor by taking out burnt copper winding, cleaning the casing & slots with wire brush & washing with pressure water & shall be dried , rewinding the motor using required gauge of super enameled copper winding wire, varnishing and stamping and overhauling etc. Making the winding leak proof & taking out the electric connection with suitable size of submersible cable up to 03 Meter, Capacity of motor 25 HP complete all as specified and as directed . Note: Quoted rates are inclusive of removing and refixing of motor
All as per Item No 4 but 12.5 HP Capacity
All as per Item No 4 but 10 HP Capacity
All as per Item No 4 but 7.5 HP Capacity
All as per Item No 4 but 5 HP Capacity
All as per Item No 4 but 2 HP Capacity
M&L for repairing and testing of pump centrifugal/non clogging upto 25 HP of any make and type including welding work, rotor turning and balancing, re-metaling of shaft bush bearing, keys, mechanincal seal, SS shaft impeller and other such accessories etc required to make pump functional and testing on load complete all as specified and as directed . Note: Quoted rates are inclusive of removing and refixing of motor
All as per Item No 10 but 12.5 HP Capacity
All as per Item No 10 but 7.5 HP Capacity
All as per Item No 10 but 5 HP Capacity
M&L for rewinding of electric motor of any make of capacity 25.0 HP, by dismantling and removing the old burnt windings and rewinding for suitable gauge of enamelled copper wire and insulating with suitable class of insulation, varnishing complete including repairs to terminal box of motor, connecting and testing, complete all as specified and directed. Note: Quoted rates are inclusive of removing and refixing of motor
All as per Item No 14 but 12.5 HP Capacity
All as per Item No 14 but 7.5 HP Capacity
All as per Item No 14 but 5.0 HP Capacity
Supply and fixing in replacement of flat submersible 3 core 6 sqmm cable PVC insualted unsheathed multistranded copper conductor water proof suitable for submersible pump set complete all as specified and as directed.
Supply and fixing in replacement of flat submersible 3 core 10 sqmm cable PVC insualted unsheathed multistranded copper conductor water proof suitable for submersible pump set complete all as specified and as directed.
S&F PVC insulated, multi-stranded, heavy duty cable of size 16.0 sqmm single core with copper conductor fixed on wall or passing through pipes/ in floors connecting up and testing complete all as specified and directed.
Taking out unserviceable GI pipe 100 mm bore from trenches including fittings/ fixtures like bend, Tee, Union, elbow etc. complete all as specified and directed.
All as per item No. 21 above but 80 mm bore GI pipe.
All as per item No. 21 above but 50 mm bore GI pipe.
Supply and lay in trenches 100mm bore GI tubing medium grade with screw, socket joints with all fittings/ fixtures like bends, sockets, unions, nipples etc. including making alterations in existing/ new pipe as required complete all as specified and directed.
All as per item No. 24 above but 80mm dia GI tubing.
All as per item No. 24 above but 50mm dia GI tubing.
Supply and fix electronic automatic phase sequence corrector suitable for various capacity star-delta starter including taking down the existing unserviceable one complete all as specified and directed.
Taking down the existing unserviceable over load protector relay and replace with new overload relay, range 6 - 39 Amps complete all as specified and directed.
Supply and fix single phasing preventer to various HP suitable for star delta starter including taking down the existing unserviceable kit complete all as specified and directed.
Taking down the existing unserviceable contactor and replace with new contactor suitable for MK-1 starter complete all as specified and directed.
Taking down the existing unserviceable timer and replace with new Timer suitable for ML-1 star delta starter complete all as specified and directed.
Taking down the existing unserviceable No. volt coil and replace with new No volt coil suitable for ML-1 star delta starter complete all as specified and directed.
Supply and fix DOL starter 3 phase 440 volts with relay range upto 16 amps including taking down the existing unserviceable one complete all as specified and directed.
Supply and fix star delta starter with single phase protection and relay range from 13-32 amps 3 phase 440 volts including taking down the existing unserviceable starter complete all as specified and directed.
Supply and fix MCB, 4 pole, 415 volts, 3 phase, 50 c/s, 63 Amps capacity including taking down the existing unserviceable one complete all as specified and directed.
Supply and fix MCB SP 20 Amps 230 V, AC including taking down the existing unserviceable one complete all as specified and directed.
Supply and fix MCB SPN 40 Amps AC 240 volts including taking down the existing unserviceable one complete all as specified and directed.
Supply and fix gland rope of any size after removing out old unserviceable one complete all as specified and directed.
NAVEEN ENTERPRIESES (BID ID -3503336)
GK ENTERPRISES (BID ID -3502545)
M/s.Sai Agency (BID ID -3498809)
SWIFTTECH ENGINEERS INDIA PVT LIMITED (BID ID -3508048)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.63 MB
Tender8817.pdf
Tender Documents • 0.90 MB
BOQ_831096.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .