Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.0 LAccepted-AOC D 18 ANAND PURAM SHAHGANJ SHAHGANJ AGRA UTTAR PRADESH 282010 | AGRA | UTTAR PRADESH | 282010 | L1 | Accepted-AOC You are first lowest |
Tender Value
₹47.2 L
EMD Value
₹95,000
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sr Manager Elect
Office of the Sr Manager Elect ED II UPSIDA TDS City Ghaziabad
Supply and Installation of LED High Mast Lighting System under Atal Industrial Infrastructure Mission at IA. Babrala (Shambal)
2023_SIDC_809737_1
ED-II(05) Date 03.04.2023
Open Tender
Electrical Works
Item Rate
90 days
Babrala
As per tender documents
2 documents required · 2 mandatory
₹2,327
Sr Manager
₹95,000
4 Jul 2023
7 Jun 2023
15 Jun 2023
7 Jun 2023
14 Jun 2023
7 Jun 2023
Amount
Electrical Works.
Supply & Fixing of 16 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 4 mm top dia minimum 150 mm bottom dia 360 mm base plate 32 mm thick suitable for wing velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as had frame suitable for 12 luminaries(on single ring carriage) & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site regiment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect. (Bajaj/Cromption/Philips/Wipro make)
Supply & Fixing of 12.5 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 4 mm top dia minimum 150 mm bottom dia 310 mm base plate 25 mm thick suitable for wing velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as had frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site regiment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect. (Bajaj/Cromption/Philips/Wipro make)
Supply & fixing of factory wired integral 200 W LED flood light luminaries with die cast aluminium housing built with driver set confirming to IP 66 protection complete in all respect,(Bajaj/Cromption/Philips/Wipro make with 5 year warranty against any defects declaration issued by OEM/Contractor) Minium Cat.-AA
Supply & laying 3x1.5 sq. mm FRLS PVC Insulated copper cable 1100V grade in existing pipe/pole shaft for LED light connection to pole terminal block including cost of all material, men and T&P.
Supply & fixing 25 TPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors,HRC fuses/MCB/isolating switch metering instrument & instrument box with CT's etc. as per technical specification approved by engineer in charge.
Supply & fixing of 125 Amp 4 pole MCCB (16 KA) Thermal Magnetic release CAT B
Supply and fixing of M.S. box of size 600mm x 480mm x 200mm deep in sunk for housing BDB/TPN fabricated from 16 gauge M.S. Sheet and 13mm x 2.5mm flat iron etc. painted outside with red oxide primer and inside with synthetic enamel paint complete in all respect. as per technical specification approved by engineer in charge.
Supplying and laying of 25 sq. mm. 3.5 core aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top.
Supply and laying of 50 sq.mm 3.5 core size aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade in existing pipe/Surface/pole etc.(Havells/Polycab/Grandley only)
Supply and laying of 95 sq.mm 3.5 core size aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade in existing pipe/Surface/pole etc.(Havells/Polycab/Grandley only)
Supply & Laying of 63 mm DWC HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (750 mm below ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.(Through Normal Excavation road side/park etc.)
Supply & Laying of 63 mm DWC HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (750 mm below ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.(Through horizontal trenchless boring .)
Supply & Laying of 90 mm DWC HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (750 mm below ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.(Through Normal Excavation road side/park etc.)
Supply & Laying of 90 mm DWC HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (750 mm below ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.(Through horizontal trenchless boring.)
Supply and fixing of brass nickle plated compression gland for 16 sq. mm PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer In charge
Supply and fixing of brass nickle plated compression gland for 25 sq. mm 3.5 core PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer in charge.
Supply and fixing of brass nickle plated compression gland for 50 sq. mm 3.5 core PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer in charge.
Supply and fixing of brass nickle plated compression gland for 95 sq. mm 3.5 core PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer in Incharge.
Supply & fixing of plan or pin type copper tin plated socket/Lug to the 16 sq. mm cable leads,insulationt tape and making connection etc. complete in all in respect as per direction of Engineer in charge.
Supply & fixing of plan or pin type copper tin plated socket/Lug to the 25 sq. mm cable leads,insulationt tape and making connection etc. complete in all in respect as per direction of Engineer in charge.
Supply & fixing of plan or pin type copper tin plated socket/Lug to the 50 sq. mm cable leads,insulationt tape and making connection etc. complete in all in respect as per direction of Engineer in charge.
Supply & fixing of plan or pin type copper tin plated socket/Lug to the 95 sq. mm cable leads,insulationt tape and making connection etc. complete in all in respect as per direction of Engineer in charge.
Supply & fixing of 50 mm dia GI pipe B class for climbing up the cable from ground to over head line LT pole complete with GI fitting including material,labour and T&P.
Supply & fixing of 100 mm dia GI pipe B class for climbing up the cable from ground to over head line LT pole complete with GI fitting including material,labour and T&P as per SIDC Sch item No. 25A.1(LS 3.0 mtr for each pole)
Supply & fixing MS clamp made out from 50x6mm MS flat for securing 50mm GI Pipe/HDPE with ST pole.
S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per technical specification approved by engineer in charge.
Providing & fixing 25mm x5mm G.I. earth strip on surface or in recess including cost of GI saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections.
Painting letters (Pole No.) 2.5cm up to 8.0 cm size complete on Street light Pole/Panel/Other electrical properties under UPSIDA including cost of all material, men and T&P.
Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed or as per technical specification approved by engineer in charge.
Providing operating cum maintenance staff of the entire street light network for routine maintenance of road lighting system,administrative,site offic and staff colony etc. including dismantling & re-fixing of other street lights of UPSIDA with there travelling expenses etc. (Electrician-1 Nos.+ Helper-2 Nos. only for AMC work )
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .