REPAIRS MAINTENANCE TO FENCING BOUNDARY WALL GATES AND ALLIED WORKS IN CAFVD AREA RA LINE ENGINE HOUSE ROAD CLARK ROAD OVERSEER ROAD STN HQ KIRKEE SARVATRA VIHAR AND CENTRAL AREA OF AGE BR I CENTRAL UNDER GE CENTRAL KIRKEE

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for plain cement concrete (1:4:8), type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for plain cement concrete (1:2:4), type B2 using 40mm graded aggregate as in fixing of fencing posts complete all as specified and directed.

Material and labour for plain cement concrete (1:3:6), type C1 using 20 mm graded stone aggregate as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work and finished even and smooth without using extra cement complete all as specified and as directed.

Excavating in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sq m on plan and n.exc. 1.5 m in depth and getting out, in any type of soil complete all as specified and as directed.

Returning, filling in excavated soil, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard / dense soil etc complete as specified as directed.

Removing excavated material to a distance n exc. 50 mtr and depositing where directed at a level n exc.1.50 mtr above starting point complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fix rolled mild steel as in framed work conforming to Fe-290, Gde E-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides and hanging; also fastening and fixing complete all as specified and as directed.

Supply and fix 1.25mm thick rolled mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Supply and fix rolled mild steel work as in fencing posts and struts, swan neck in fencing including cutting tops to shape as directed drilling holes notching for wire etc., flat iron fillets (for securing wire mesh) including all necessary steel bars conforming to FE-410-O or FE-310-O including one shop coat of zinc chromate primer complete all as specified and as directed.

Supply and fix for Mild steel screw bolts dia of neck 5 to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm & n.exc 10 cm long

Supply only Chain link MS galvanised fencing, any size or type, complete all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Dismantling fencing wire mesh, any type and size, complete all as directed.

Supply and fix in repairs Galvanised. 2 strands, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. NOTE :- Each line of wire to be measured.

Demolition of reinforced concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for reinforced cement concrete nominal mix, type A1, (1:11/2:3) using 20mm graded aggregate as in columns , piers posts and struts complete all as specified and directed.

Material and labour for reinforced cement concrete nominal mix, types A1, (1:11/2:3) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Material and labour for reinforced cement concrete nominal mix, types A1, (1:11/2:3) using 20mm graded stone aggregate as in beam, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Material and labour for TMT steel bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Material and labour for TMT steel bars 5 mm dia and over up to and including 10mm dia as in stirrups, spacers and binders all as specified and directed.

Material and labour for steel form work to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and directed.

Material and labour for steel form work to sides of column footings, plinth beams rough finished surfaces of concrete laid flat all as specified and directed.

Material and labour for steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for pre-cast cement concrete solid block masonry with solid block of the grade C-1, (1:3:6) using 20mm graded aggregate set in CM (1:6) complete all as specified and as directed.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar CM (1:6) complete all as specified and as directed.

Removing cement mortar from and cleaning stones, obtained from masonry of any description (except ashlar facings and dressed stone work) and stone setts from pavings; stacking for measurement including all extra handling and removal and disposing off rubbish

All as per Sl Item No 29 above but except stone complete all as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm on lime/sand stone all as specified and directed.

Material and labour for raised pointing to RR masonry in CM (1:4) all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for precast cement concrete louvres and jallies type B-0, (1:2:4), using 12.5mm graded stone aggregate, 50mm thick (measured solid),all mouldings including demolition of existing RCC jallies complete all as specified and as directed.

Material and labour for preparation of new surfaces (plastered or un-plastered) of walls or RCC Jaffries and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement plaster in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing granite or stone slabs of any type and position complete all as specified and as directed.

Demoition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour plain cement concrete, (1:3:6), type C-2 using 40mm graded stone aggregate as in floors, plinth protection, 75 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as directed by Engr-in-Charge.

Material and labour for 75mm thick plain cement concrete, (1:4:8), type D-2, using 40mm graded stone aggregate as in sub base including demolition of existing flooring n.exc. 15cm below or above GL complete all as specified and as directed.

Material and labour for precast interlocking paver block with grey cement and pigment, factory made, any shape and size, rubber moulded, glossy finish conforming to IS 15658-2006 of 60 mm thickness, made out of M-35 grade concrete including material and labour for 50 mm thick crushed stone sand filling under floors and demolition of existing interlocking paver blocks complete all as specified and as directed.

Material and labour for coloured glossy finish chequered cement concrete tiles of size 300 x 300 x25 mm size with grey cement and pigments, set jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

VP DEVELOPERS AND CONTRACTOR

DARSHAN ENTERPRISES

MANIYA CONSTRUCTION CO

Shri Sant Cosntruction

V.R.PRAJAPATI AND CO.

M/S JAYCONSTRUCTION CO

AMW Construction and developers

S S CONSTRUCTION COMPANY

M/S SANDEEP CONSTRUCTION COMPANY