Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹21.5 LAccepted-AOC | L-1 | Accepted-AOC BEING L1 | |
| 2 | L-2₹24.5 L+₹2.1 L (9.29%)Rejected-Finance C O S 1 ESS GEE COMPLEX NEAR J K BANK SONAWAR BAZAR B B CANTT SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹25.9 L+₹3.5 L (15.7%)Rejected-Finance R O KHREW TEH PAMPORE DISTT PULWAMA PIN 191103 J K | PULWAMA | JAMMU AND KASHMIR | 191103 | L-3 | Rejected-Finance L-3 | |
| 4 | L-4₹27.4 L+₹5.0 L (22.4%)Rejected-Finance | L-4 | Rejected-Finance L-4 | |
| 5 | L-5₹29.8 L+₹7.4 L (33.1%)Rejected-Finance | L-5 | Rejected-Finance L-5 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
30 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 861 EWS
GE 861 EWS c/o 56 APO
REPAIR TO DRAINS PCC PATH FENCING HARD STANDING AND OTHER B R WORKS AT KHUNMOH GRN UNDER GE 861 EWS
2023_MES_593924_1
GE 861 EWS-24/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE 861 EWS
As per tender documents
7 documents required · 7 mandatory
₹500
GE 861 EWS
₹80,000
Yes
21 Jul 2023
9 May 2023
6 Jun 2023
9 May 2023
30 May 2023
23 May 2023
Amount
Demolition of cement concrete in ground floor and paving n/exe 15 cm thick below or above GL.
Demolition of brick or stone masonry built in cement mortar including all necessary arches, quoins, pillars etc but exculding ashlar facings, dressed stone work and precast concrete aritlces.
Demolition of reinforced cement concrete of any description ( reinforcement cut as reqd to facilitate demolition ).
Demolition of cement concrete of any description and in any position not otherwise specially provided complete.
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and directed.
Dismantling structural steel work including doors, gates etc but excluding framed trusses etc complete all as specified and directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.
M&L for squared rubble walling , brought upto courses , well bounded , bedded and solidly hearted , built in cement mortar 1:6 complete all as specified and directed.
All as per item No 9 here-in- before but but except stones complete all as specified and directed.
M&L for for flush pointing to random rubble masonry in cement mortar 1:3 complete all as specified.
M&L for brick work with sub class ‘B’ brick straight or curved on plan exceeding 6m mean radius in cement motar 1:6 complete all as specified.
All as per item No 12 here-in- before but but except bricks complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified & directed.
M&L for rendering15 mm thick in cement mortar 1:6 finishing on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.
M&L for 50 mm thick, PCC 1:3:6 type C-1 (20mm gradded agg) as in repair to plinth protection finished even and smooth without using extra cement complete all as specified and directed.
M&L for PCC 1:2:4 type B-2, (using 20mm graded aggregate) as in grouting of angle posts, pillars, coping,plinth courses,parapets and raillings etc including necessary form work complete all as specified and directed.
M&L for 25 mm thick 1:2:4, type B-0 (using 12.5 mm graded agg) as in flooring finished even and smooth w/o using extra cement complete all as specified and directed.
M&L for Non skid ceramic coloured 7 to 8mm thick (square/ rectangular), area of each tiles exc 0.11 but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15 mm thick in cement mortar 1:4 for laying floor finish complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7 / 450 x 350 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick cement plaster in cement mortar 1:4 complete all as specified and directed.
M&L for PCC 1:2:4 type B-1, (using 20mm graded aggregate) as in surface channel and drains complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6, type C2 (using 40 mm graded aggregate) as in sub base for receiving floor finishes etc. complete all as specified and directed.
M&L for 100 mm thick PCC 1:2:4 type B2, (using 40 mm graded aggregate) as in hard standing/floor finishes etc. laid in alternate panels complete all as specified and directed.
M&L for chequerd cement concrete tiles, glossy finish 30cm x 30cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors laid over 15 mm thick screeed bed in cement mortar 1:6 complete all as specified and directed.
M&L for coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15656 -2006 of 60 mm thick M-35 with grey cement and pigment all as specified and directed.
M&L for sand filling under floors or foundation, and receiving to interlocking tiles/paver block, complete all as specified and directed.
M&L for pre-cast cement concrete (reinforced) type B-1, 1:2:4 (using 20mm graded aggregates) as in manholes cover slab set in cement mortar 1:4. including necessary form work complete all as specified and directed.
M&L in repairs for precast cement concrete, RCC 1:2:4, type B0 (using 12.5 mm graded aggregate) as in louvers and jallies, 40 mm thck (measured solid) including pre-cast pillars of size 125 mm x 125 mm in section including all moulding, complete set in cement mortar 1:4 on wall etc all as directed..
M&L for RCC 1:2:4, Nominal mix, type B1 (using 20 mm graded aggregate) as in beams, cantilevers bressumers lintels over 1.5 span beam supported on walls etc complete all as specified and directed.
M&L for RCC 1:2:4, Nominal mix, type B1 (using 20 mm graded aggregate) as in slab supported on walls, beams and column in floors, roof landings, balconies, canopies, deck slabs, culverets supported on walls etc complete all as specified and directed.
Form work to sides of RCC/PCC beam/band in wall and similar work complete all as specified and directed.
Form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work not exceeding 200mm complete all as specified and directed.
M&L for MS TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for MS TMT bars 5 mm dia and over, upto and including 10 mm dia, cut to length, bent to shape as in stirrups, spacer and binders etc complete all as specified and directed.
S&F angle iron for posts, struts in fencing including cutting tops, to shape as required, drilling holes, notching for wire, including welding etc, confirming to Fe-290 Gde, E-165 complete all as specified and directed.
S&F framed work such as grills, gratings etc, with ends of bars, shouldered, riveted, framed guard bars, confirming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F framed work as in doors or gates of angle or other section with gusset plate, rails braces etc, complete drilling for fixing of steel sheeting,hanging, fastening and fixing complete all as specified and directed.
S&F in repairs for galvanised, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs, 75 mm spacing and straining and fixing to any type of standard rails and straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, steples or steel pins as directed. (Each line wire to be measured).
S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side laps, fixed with L-type or J-type or cranked hook bolts, in roofs, wall etc with grade of zinc quoting 275 complete all as specified and directed.
S&F 0.63mm thick galvanised, Plain mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
M&L for two coats of synthetic enamel paint on new steel surfaces as in roof sheets, over 10cm width or girth including preparing with redoxide zinc chrome (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc as required complete all as specified and directed..
M&L for preparation of new surfaces of steel, over 10cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide primer on angle iron complete all as specified and directed.
M&L for preparing new plastered surface of walls and applying three coats of white wash on walls complete all as specified and directed.
M&L for preparing new plastered or un plastered surface of walls and applying two coats of Cement base paint on walls a coat of alkali resistance primer complete all as specified and directed.
M&L for preparing old plastered or un plastered surfaces of walls and applying one coat of Cement base paint on walls complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and directed.
M/S A.N CONSTRUCTIONs
M/S SHEIKH FEROOZ AHMAD
M/S MOHAMMAD SHABAN AND CO
M/S STARE BUILDERS
BHAT CONSTRUCTIONS AND BUILFERS
M/S GASSI CONSTRUCTION AND CO
M/S RASHID CONSTRUCTION
osho traders
M/S AKMAL CONSTRUCTIONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .