Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.7 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹19.0 L+₹36,315.65 (1.95%)Rejected-Finance 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹19.2 L+₹49,365.53 (2.64%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹19.6 L+₹96,005.80 (5.14%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹19.7 L+₹1.1 L (5.70%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
Refer Docs
EMD Value
₹49,000
Closing Date
5 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST MATHURA
Garrison Engineer East Military Engineer Services Mathura Cantt Mathura 281001
SPECIAL REPAIR TO BLDG NO E-32 MH LINE UNDER GE (EAST) MATHURA
2022_MES_569030_1
8200-1321/E8
Open Tender
Civil Works
Item Rate
180 days
GE EAST MATHURA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE EAST MATHURA
₹49,000
20 Jan 2023
14 Dec 2022
7 Jan 2023
14 Dec 2022
5 Jan 2023
29 Dec 2022
14 Dec 2022 - 5 Jan 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
M&L 25 mm thick cement concrete type B-0, 1:2:4 (using 12.50mm graded stone aggregate) as in levelling course for laying floor tiles etc complete all as specified and as directed.
M&L for Non skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles of size 450x300x7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10 mm thick backing coat of cement mortar 1:3 complete all as specified and as directed.
M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.
M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in cement motar 1:3 complete all as specified and as directed.
M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat oil bound distemper oil emulsion complete all as specified and as directed.
M&L for providing 1mm thick wall care putty on plastered surfaces of walls complete as specified and as directed.
Taking down cement plaster of any description from brick wall or concrete surface including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 10 mm thick on concrete surfaces as in ceiling in cement mortar 1:3 finished even & fair complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 finished even and fair complete all as specified and as directed.
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with liquid WPC as per manufacturers instructions finishing the surface even and fair complete all as specified and as directed. Note : Liquid WPC shall be mesured & paid separately under relavent item of this BOQ.
Supply only liquid water proofing compound of approved make complete all as specified and as directed.
M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved by GE
M&L for preperation of new plastered surfaces of walls and applying two coats of oil bound distember over a coat of alkali resistant primer complete all as specified and as directed.
M&L for preparing new plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint dark shade over a coat of primer (100% Acrylic) including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for preparation of new plastered surface of ceilling and applying three coats of white wash on ceiling surface complete all as specified and as directed.
S&F in repair 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets, stops end caps etc. complete all as specified and as directed.
Dismantling, stone slabs of any description or thickness in floors/laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for 20mm thick Granite (of any type) work black colour as approved by Engineer-in-Charge (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.
S&F sinks made of stainless steel sheet 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections complete all as specified and as directed.
Taking up or down 20 mm bore steel tubing and connections complete all as specified and as directed.
S&F steel tubes, galvanised, medium grade, 15mm bore with and including all fittings fixed to walls and ceiling or laid in floor complete all as specified and as directed.
S&F steel tubes, galvanised, medium grade, 20mm bore with and including all fittings fixed to walls and ceiling or laid in floor complete all as specified and as directed.
S&F chromium plated Hand jet health faucet 15 mm bore with 8mm dia & 1.2 mtr long flexible tube and wall hook with all connected fittings complete all as specified and as directed.
S&F in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down screwed for 15mm bore dia iron pipe complete all as specified and as directed.
S&F in repair angular cock, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for 15mm bore dia iron pipes complete all as specified and as directed.
S&F in repair bib taps long body cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipes 15mm bore dia complete all as specified and as directed.
S&F in repair basin mixer cast copper alloy chromium plated 15 mm bore with 450mm braided connection pipe complete all as specified and as directed.
S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps, waste chain and plug but including bracket complete all as specified and as directed.
S&F in repairs wash down water closet (pedestal pattern) complete (excluding flushing cistern or flush pipe) pedestal pan and trap including Plastic water closet seat cover white, closed pattern with flat bottom and cover with mild steel hinge chromium plated including connection to drain (or outgoing pipe) and flushing pipe, antisyphonage pipe etc, complete and all as specified and as directed.
S&F in repair PVC valveless syphonic action type flushing cistern Low level of 10 litre capacity, white with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.
S&F in repairs wall mixer 15 mm bore cast copper alloy chromium plated with connector and including hand shower and head shower arrangement with connecting legs, wall flanges and wall bracket for hand shower complete all as specified and as directed.
S&F in repairs Hand shower (ABS brass chromium plated body) with 8mm dia, 1.20mtr long flexible tube & wall hook complete all as specified and directed by Engineer-in-Charge.
S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and and directed.
S&F in repair OVERHEAD shower(with Arm) Dia 200 mm round shape single flow (body and face plate stainless steel with chrome finish )with rubit cleaning system complete all as specified and as directed.
M&L in repair sink mixer with EXTENDED swinging spout (wall mounted model )with connecting legs and wall flanges complete all as specified and as directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm including fixing complete all as specified and as directed.
S&F in repair stainless steel Towel Rail 600 mm long (Minimum weight 190 gms) fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S&F in repair Towel Rack stainless steel 600 mm long with lower hangers complete all as specified and as directed.
S&F in repair Waste coupling 32mm bore of PTMT (half or full threaded) for 32mm bore dia of discharge pipe (min. weight 32mm-45gms) complete all as specified and as directed.
S&F stainless steel Grating doom 100 mm dia of chromium plated (minimum wight 25gm) complete all as specified and as directed..
S&F Towel Ring of cast copper alloy 150mm chromium plated fixed with & including chromium plated brass screws & wooden/plastic cleats (min. weight 90 gms) complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.
S&F toilet paper holder grade 304 stainless steel with wall flange of 180x90x70mm in size complete all as specified and as directed.
S&F in repair corner glass shelf with bracket fixed to wall complete all as specified and as directed.
M&L for Pressed steel frames of size125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. supplied and fixed complete all as specified and as directed.
S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and as directed.
M&L for providing Precast cement concrete type C1 1:3:6 (using 20 mm graded stone aggregate) as in filling of pressed steel frame complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for Aluminium frame aluminium grill etc (sliding, fixed or casement) powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
S&F 5 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.50 square metre in each pane complete all as specified and as directed.
M&L for Aluminium anodised window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m powder coated (minimum wt of powder coating 50 micron) including necessary joitning cleats, glazing clips, rubber packing, aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
S&F Aluminium anodised, barrel tower bolts 75mm long of extruded section and fixed complete all as specified and as directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.
S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels veneeri type on both sides complete all as specified and as directed.
S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded and fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F extruded aluminium handles of size 150mm long fabricated type anodised complete all as specified and as directed.
S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20 mm iron pipe complete all as specified and as directed.
Supply and fix in repair rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) 1000 liters capacity white colour triple layer, hoisted and fixed on roof in position including all connections complete all as specified and as directed.
S&F in repair PVC (SWR) 110mm bore bends any radius with oval access complete all as specified and as directed.
S&F in repair PVC (SWR) 75mm bore bends any radius complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 110 mm bore single socketed, excluding fitting in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 75 mm bore single socketed, excluding fittings in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 110 mm bore single socketed, including necessary fitting in any length with rubber ring joints fixed to wall and including demolition of old pipes complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 75 mm bore single socketed, including necessary fitting in any length with rubber ring joints fixed to wall and including demolition of old pipes complete all as specified and as directed.
S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 900mm x 750mm x 255 mm complete all as specified and as directed.
S&F in repair 150mm Floor door stopper of brass body and tongue, with hard drawn steel spring complete all as specified and as directed.
S&F 18 mm thick solid PVC Kitchen PVC Sheet one side prelam sheet kitchen/ cupboard cabinet shutter of density 600 kg/cum bent at 90 degree as per modular kitchen and finish all edges at level for making edge lipping/ bending or 0.5 mm thick PVC sheet lipping at all four edges using bonding lape etc as per Manufacture's specification complete all as specified and as directed.
S&F PVC Cabinet of required size fabricated by joining 12 mm thick WPC board ply fixed with each other using solvent cement fixed with screw and solvent cement adhesive etc. complete all as specified and as directed.
S&F 18mm thick PVC shelf/partion of required size consisting of panel of celuka PVC ply and for supporting the hold of shelf /partion and shall provided 3 edges in size18 mmx 18mm as per required lengththe front side of the edge visible in the front of the shelf /partion to be edge lipped by 18 mm widthx1mm thick PVC sheet of density 600 kg/cum manufactured complete all as specified and as directed.
S&F Magnatic catcher (KTS-20) full extension load capacity 8 kgs complete all as specified and as directed.
S&F stainless steel handles, cast type polished bright of 100 mm size for kitchen cabinet shutters complete all as specified and as directed.
S&F extruded stainless steel handles, cast type polished bright of 150 mm size for cupboard shutters complete all as specified and as directed.
S&F auto closing hinges 35 mm of 0 crank( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed.
S&F stainless steel Tower bolt 150 mm size for kitchen cabinet complete all as specified and as directed.
S&F Continuous (piano) hinges width of flaps 40 mm (when opened) mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F stainless steel 304 grade kitchen modular baskets for storage of plates, cups, grain basket, glass cutlery, bottles etc as per required size complete all as directed.
Dismantling PVC WPC board ply or insulation board any thickness incl all fitting of kitchen cabinet complete all specified and directed complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below ground level) complete all as specified and as directed.
M&L for 50mm thick cement concrete M-10 grade (Nominal mix) (using 20mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed.
Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.
M&L brick work with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L Precast cement concrete type B0 1:2:4 (using 12.5 mm graded aggregate) set in cement mortar 1:4 as in louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frame complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. and getting out in soft/ loose soil complete all as specified and as directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil all complete all as specified and as directed.
Removing of excavated surplus materials to a distance exc 50 m but nexc 100 mm and depositing where directed a level n.exc 1.5 mtrs above the starting point complete all as specificed and as directed.
Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed 150mm int dia of pipe.
M&L for cement concrete 1:3:6 type C-2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm int dia of pipe complete all as specified and as directed.
M&L for Salt glazed stoneware drain pipes, grade `A` of 150 mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.
Construction of Soakage, well excavation in ordinary soil, foundation in PCC M-10 grade (Nominal mix) using 40 mm graded aggregate, wells of honey combed and solid brick work in CM , RCC slab covers, filling with brick bats, complete of size 1.80 mtr dia and 3.0 mtr deep all as specified and shown on drawings.
M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregates) as in foundation filling & mass concrete complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benchings etc.complete all as specified and as directed.
M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for MS TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item No 106.00 here-in-before but MS round bar 10 mm dia and over as in handles of manhole covers complete all as specified and as directed.
M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in cover slabs for manholes etc. complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of Brick work or concrete surface in cement mortar 1:6 complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (above or below ground level) including intelocking tiles complete all as specified and as directed.
M&L for sand filling under floors or in foundations incl watering and consolidation complete all as specified and as directed.
M&L 100 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub base complete all as specified and as direction.
M&L for glossy pattern chequred cement concrete tiles of size 30cm x 30cm x 25mm with grey cement and pigments, set jointed and pointed in neat cement slurry in floors laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for rubber moulded machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed.
Dismantling of existing roof treatment any thickness and descriptin including roof tiles etc. and removal of dismantled materials complete all as specified and as directed.
M&L rendering 10 mm thick bedding layer in cement mortar 1:3 using water proofing compound @ 3% by weight of cement or as per manufacturers instructions, on roofs to receive water proofing treatment finished even and smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound confirming to IS-2465-1075 complete all as specified and as directed.
M&L APP based polymeric membrane not less than 3 mm thick, weighing not less then 3.5 kg / Sqm, reinforeced with polyster non-woven fabric (weighing not less than 150 gm/sqm) and upper side of membrane thermally insulated with white mineral gravel finish, uniformly embeded during manufacturing process, shall be used. It shall be laid by torch application. Side overlaps shall be 100 mm and the ends shall be 100 mm and all overlaps and jointed shall also be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 30cm and then inserted inside the parapet in a grooves.The same shall be finished by a membrane flashing over a coat of cold applied bituminous primer confiming to IS:3384. @ 0.40kg per Sqm complete all as specified and directed.
M&L for providing cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in coping, coving, roof padding, padding in sunken slab as directing mixed with liquid water proofing compound complete all as specified and as directed.
M&L for cement concrete tiles 25cm x 25cm x 22mm thick, with grey cement and no pigments, machine pressed, set in neat cement slurry in floor over and including 15 mm thick screed bed in cement mortar 1:6 and filling the joints with Tile Max premium cementitious grout material of JK Cement or its equivalent complete all as specified and as directed.
M&L for chipping of unsound/deteriorated up to 50mm average thickness from slabs, beams, columns, chajja etc with manual chisel including tapering of all edges including cleaning of exposed concrete surface and reinforcement with wire brushes etc and disposal of debris complete all as specified and as directed.
Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 40 mm average depth including saw-cutting of all edges making square shoulders of the cavities complete all as specified and as directed. Note :- (i) All loose unsound and cracked concrete shall be removed out side MD land. (ii) Thickness will be measured excluding plaster
M&L for applying two coats of epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ Krishna Conchem) as approved by the Engineer-in-Charge for old and new reinforcement any dia complete all as specified and as directed. Note :- Epoxy based passivating, protecting & bonding coat of zinc rich system will be paid for separately.
Supply only epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ BASF) as approved by the Engineer-in-Charge. Note :- Payment will be made for the total weight of resin and hardener in manufactured specified proportion.
M&L for mixing and applying SBR latex modified cementitious bond coat using cement 2.2 kg per square metre on prepared concrete surfaces of parent material complete all as specified and as directed.
M&L mixing and applying SBR latex modified cement mortar 25 mm thick in cement sand mortar in proportions of 1:3 (1 cement and 2 graded quartz aggregate) with polymer admixed in proportions as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed. Note :- SBR latex will be paid for separately.
Supply only approved SBR latex from FOSROC/BASF/DR FIXIT/ SIKA for bonding coat/Polymer modified cement mortor complete all as specified and as directed. Note: Rate will be in terms of solid contents of polymer.
M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632 complete all as specified and as directed.
M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.
M&L for Treatment of soil under existing floors using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632, emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete as specified and as directed.
Taking down carefully aluminum/copper point wiring (light, fan, socket any type, power, bell etc. complete including fixtures (such as ceiling rose, socket, Pendent, regulator etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as specified and as directed.
Taking down carefully Submain wiring of any size and type complete and making good disturbed sufaces to match with the existing surfaces complete all as specified and as directed.
Taking down old unserviceable existing SPN/TPN DBs/enclousers any size and type/any descriptions including MCBs any type and making good disturbed surface of walls to match the existing surface complete all as specified and as directed.
M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less than 20mm dia) and its all accessories complete concealed in wall/roof incl cutting & chases and making good the disturbed surfaces to match the existing surface including modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc including earth wire of PVC insulated (FRLS) copper conductor multi strandered of 1.5 Sqmm size in green colour complete all as specified and as directed for the following:-
One light/fan/exhaust fan point controlled by one way modular switch 5 amp complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one way modular switch on the same board complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one way modular switch on independent board complete all as specified and as directed.
One bell point controlled by one push button on independent board complete all as specified and as directed.
All as per item No. 137.00 here-in-before but for 3/5 pin 16 Amps socket outlet with 4 Sqmm PVC insulated and unsheathed (FRLS) copper conductor cable independent point wiring complete all as specified and as directed .
S&F Modular switch single pole one-way, 6 Amps 1 Module complete all as specified and as directed.
S&F Modular bell push switch with indicator single pole one-way, 6 Amps 1 Module complete all as specified and as directed.
S&F Modular switch single pole one-way, 16 Amps 1 Module complete all as specified and as directed.
S&F Modular fan Regulator electronic step type, 2 Module complete all as specified and as directed.
S&F Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified and as directed.
S&F Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed.
Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals isolated body complete all as specified and as directed.
S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
S&F Bell Ding dong type, 230 Volts including connections complete all as specified and as directed.
S&F indoor decorative ultra slim surface/Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F in repair indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light fitting 1X9 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F indoor in repair indoor wall mounted fitting, brushed nickel finish fixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts-02 Nos complete all as specified and as directed.
S&F SP enclosure with a two pin and earth plug and socket complete with one single pole MCB 25 Amp complete all as specified and as directed.
S&F SP enclosure with a two pin and earth plug and socket complete with one single pole MCB 16 Amp complete all as specified and as directed.
S&F LED 9W lamp suitable for normal (Base Cap B22) type holder complete all as specified and as directed.
S&F in repair environmental friendly, ultra modern, energy saving, surface mounted, LED bulk head fitting of 10 watt complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.
Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified and as directed.
S&F for building security light bracket made out of 40mm dia medium grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including applying two coats of aluminium paint over a coating of red oxide primer complete all as specified and as directed.
S&F Sub main wiring with two run of single core 10 Sqmm cable PVC insulated unsheathed (FRLS) cable with strandard copper conductor, 1100 votls grade drawn through and including non metalic PVC conduit (not less then 25 mm dia med grade) including all its acessories concealed in wall/roof including necessary cutting/chase and making good distured surface including 10 Sqmm PVC insulated unsheathed stranded (FRLS) cable for earth wire complete all as specified and as directed. Note : Two runs of 10 Sqmm cable, one run of 10 Sqmm earth wire & 25mm PVC Conduit shall be measured as one unit length.
S&F powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted, triple pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as specified and as directed.
S&F in repair MCB TPN 40-100 Amps, 'C' series, breaking capacity 10KA, 240V including taking down old MCBs complete all as specified and as directed.
S&F in repairs MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail, cable ties for cable management, 240 V, complete all as specified and as directed.
S&F MCB SPN 40 to 63 Amps, 'C' series, breaking capacity 10KA, 415V complete all as specified and as directed.
S&F MCB SP 6-32 Amps, 'C' series, breaking capacity 10KA, 240V MCBs complete all as specified and as directed.
Taking down carefully service connection of any type complete all as and as directed.
Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables etc and getting out complete all as specified and as directed.
Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.
Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each after cables have been laid and tested complete all as specified and as directed.
Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor size 16 sqmm 4 core laid in trenches/duct/fixing on walls/poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and as directed
S&F exhaust fan, sturdy engineering plastic body AC single Phase 50Hz 230V of size 250mm sweep with, blades, and frame and louvers and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and as directed.
S&F exhaust fan, steel body AC single Phase 50Hz 230V of size 300mm sweep with, blades, and frame and louvers and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and as directed.
M&L for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete all as specified and as directed.
M/S ANIL KUMAR
ARCHI ENGINEERS
M/S SHRI RAM INFRASTRUCTURE
Shiva Traders
VASUNDHARA AND COMPANY
M/S PREETI CONSTRUCTION
M/s Hoti Lal Contractor
subhash construction co
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .