5th Dry Docking Repairs of TUG TARINI

General Services & Docking (DECK SIDE DEFECT)

Cost of Dry Dock Charge: NOTE: 1) The firm shall quote the no. of days requiring at Dry Dock for repairs 2) The amount for Dry Dock related charges shall be paid by PPA directly to M/s. Sadhav Offshore. 3) The Dry Dock charges will be considered for financial evaluation purpose only for this tender. 4) If the Firm take more days at dry dock than quoted days then the applicable dry dock charges for the additional days shall be recovered from the firm.

Ship's Hull under water portion, bilge keel to be scrapped the marine growth and to be grit blast the entire under water portion up to main deck make completely rust free and show the bare surface after taking all precautions for inspection of IRS surveyor.

To paint under water area with 6 coats of epoxy paint by airless spray (2 coats primer + 2 coats sealer + 2 coats anti-fouling), paint PPA supply.

The hull portion above water level, main deck to be thoroughly grit blasted & power cleaned to make completely rust free and free of all foreign/loose materials after taking all precautions.

The above water level area to be painted with 4 coats of epoxy paint by airless spray(2 coats primer + 2 coats of finish paint), paint PPA Supply.

Draft marks, L.L. marks and 'TUGS' name to be painted with enamel white paint, paint PPA supply.

Both anchor and chain have to be lowered, scrapped and grit blasted to SA 2.5. All the joining shackles (4 nos. each side) are to be opened and overhauled. The chain to be calibrated and to submit the report for survey by IRS surveyor. Both anchor and chains to be painted with 2 coats of epoxy paint by airless spray. After finishing the paint work, connect the joining shackle and mark with white/red paint and seizing wire. Hoist both anchors in position and secure properly . paint PPA supply.

Both chain lockers to be power cleaned, chipped, scrapped and painted with 4 coats of epoxy paint(2coats primer + 2 coats black epoxy). Paint PPA supply .

Existing zinc anodes (10kgs.) in the underwater area are to be removed and fitted back with new anodes. MAKE SARGAM WITH TEST CERTIFICATE.