REPAIR TO INTERNAL WATER SUPPLY, CHAJJA, FLOORING, PLINTH PROTECTION, TILES AND OTHER MISC WORKS UNDER AGE B/R-I AT ITARANA, ALWAR

Amount

Taking down cement plaster of any description on walls, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed.

M&L for demolition of concrete (unrreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to location outside defence land complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar includin gall quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L fly ash brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 complete all as specified and directed.

M&L rendering 15mm thick,plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:4 including finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick,plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:6 including finished surfaces fair and even complete all as specifed and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified.

M&L 5mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in bedding layer of floor finished the surface even and rough complete all as specified and directed.

M&L for coloured non skid ceramic tiles(Ist quality) 7 to 8mm thick area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm, as in floors etc., laid over and including 15 mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per item No 12.00 above but in skirting over and including 10 mm thick plaster in cement mortar 1:6 including necessary cutting of tiles as required size all as specified and as directed.

M&L for coloured non skid ceramic tiles(Ist quality) 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc., laid over and including 15 mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic tiles (Ist quality) (coloured) 300mm x 200mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.

M&L Glazed ceramic coloured tiles(Ist quality) in vertical surface 450x300 x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in Cement& Sand Mortar 1:4 complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, beded and pointed in any mortar including removing the dismantled material complete all as specified and as directed.

M&L for 16-18mm thick Granite black colour (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, staircase treads and like jointed over and including 15mm thick screed in cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, compltee all as specified.

Taking down Chowkhats or frame with shutters (without taking off shutters from the frames) not exc 2.0 Sqm each.

Taking down Chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4..00 Sqm each.

S&F Mild steel framed work such as grills, gratings, etc using angle Iron ,flat Iron ,round bars with end of bars shouldered and or rivetted or forged into spikes ,framed guard bars barred into iron doors ,walkways railing framework amd similler work confiming to Fe 290 ,GDE E-165 all as specified and directed.

S&F 35mm thick, factory made panelled door shutter (two panel), plain, framed with 2nd class hard wood lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS-1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.

S&F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 10mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast complete all as specified and directed. (SS Butt Hings shall be paid seperately supply only).

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F stainless steel butt hinges, 100mm medium weight and fixed complete all as directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as directed.

S&F mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia, 300mm leng, with and including a minimum of 6 bolts and nut, four on bolt plate and two on staple plate and fixed complete all as directed.

S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring).

M&L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed.

M&L preparing new surfaces plastered or unplastered on walls etc & applying two coats of distemper oil emulsion over a layer of chalk whiting preparatory to distempering complete all as specified & directed.

M&L preparing new surfaces plastered or unplastered on walls etc & applying two coats of cement base paint over primer with alkali- resistant primering paint complete all as specified & directed.

M&L for preparing plastered or unplastered new surfaces of ceiling & applying three coats white wash complete all as specified & directed.

Complete removal of existing treatment & preparation of old surfaces by washing rubbing down and stopping of plastered surfaces and applying two coats of Cement based paint white or tined on walls including over a one coat of alkali-resistant priming paint complete all as specified and directed.

M&L for prepararing surfaces plastered or unplastered old surfaces of ceilings and applying one coat of white wash complete all as specified & directed.

M&L for preparation of old wall surfaces by washing rubbing down and stopping of distempered surfaces and applying one coat of distemper oil emulsion white or tined on walls including cornices etc complete all as specified and directed.

Hacking out old broken glass of any thickness/size & any description from wooden or steel frame fixed with clips /putty /wooden beading and S&F with 3mm thick ordinary sheet glass fixed with clips and oil putty/wooden beading completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

All as per item No 38.00 above but 3mm thick figured glass, pin head type.

Hacking out old broken glass from metal/aluminium frame incl punching or drilling out old glazing pins/springs/clips/ beading and providing & fixing new of any thickness/size of any description and S&F for 5.5 mm thick Sheet glass, ordinary quality and glazing in square exc 0.5 sq. m in each pane complete all as specified.

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed tinned tacks or GI wire stampe or nails and screws/wooden beading complete all as specified & directed.

S&F in repairs particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified & directed.

S&F in repairs MS dropery rod 19/20 mm dia fancy type with PVC coloured sleeves fixed with suitable brackets two Nos & PVC colour bowl two Nos at end for door/window compleete all as directed by Engr-in-charge.

S&F in repairs SS Curtain rod 19/20mm dia as including suitable fancy type brackets fixed wity rawl plug, screw etc complete all as specified.

S&F in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), complete all as specified & as directed.

S&F in repairs brass mortice lock, vertical type, size 65mm, 2 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.

S&F in repairs MS helical door spring 300 mm size with roller & roller plate fixed to wooden or steel frames with Screws/welding as required at site complete all as specified.

S&F in repairs 300 mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed all as spd.

S&F in repairs Extruded aluminium alloy handle, fabricated type, anodised, 125mm size, (ISI marked) complete all as specified.

S&F as in repairs 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified

S&F in repairs butt hinges 100 mm long medium weight cold rolled MS fixed in repairs to wooden or pressed steel/angle iron frames by welding all as specified.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed overall length 140 mm complete all as specified & directed.

S&F in repairs MS steel window stay 300 mm long for steel windows all as specified and directed by Engineer-in-Charge.

S&F in repairs handles for steel windows all as specified and directed by Engineer-in-Charge.

Welding in repairs not exceeding 6mm thick and not exceeding 2.5 cm in length all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description not exc 1 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.

S&F for 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as directed.

S&F for 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting not exc 10cm girth complete all as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position with ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms all as specified in SSR Part I including dismantaling existing water tanks complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position with ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms all as specified in SSR Part I including dismantaling existing water tanks complete all as specified and directed.

S&F in repairs ball valves of 20mm dia, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed, minimum weight - 210 gms of including taking down existing ball valves any type all as directed by Engr-in-Charge. Make : Prayag or equivalent as approved by GE.

S&F in repairs vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified. Make : Hindware/Cera as approved by GE.

S&F in repairs vitreous china squatting pan 'orissa pattern' size 580mm x 450mm white with integral foot rest (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed.

S&F in repairs vitreous china wash basin white of size 550mm x 400mm with padestal stand (ISI marked) including 32 mm CP waste coupling & PVC flexible waste pipe of min 90cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs Jet spray PVC butterfly plated for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F in repairs health fusset chromium plated suitable for 15 mm bore pipe including 1 M long PVC tubes for EWC complete all as specified & directed by Engineer-in-Charge.

S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion, complete all as specified.

S&F in repairs for PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as directed.

S&F in repairs for PVC internal fittings (kit) complete for low level flushing cistern tank, all as specified and directed by Engineer-in-Charge. Make : Commander/Perryware.

S&F in repairs for towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed by Engr-in-charge including taking down existing towel rail complete all as specified and directed.

S&F in repairs CP toilet paper holder with cover complete all as specified and directed.

S&F in repairs waste coupling 32mm of PTMT (half or full threaded) (minimum wt 45 gms complete all as specified & directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified an directed.

Supply and replacement in repairs of brass spindles, phases of brass of any size required 3/4/5 for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed.

S&F in repairs for MS grating CP 75/100mm dia, with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.

S&F in repairs 15mm bore pillar taps, Cast Copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed.

S&F in repairs brass chromium plated shower rose with long arm 150mm size fixed to 15mm bore pipe all as directed.

S&F in repairs sink with draining board made out of stainless steel 1mm thick sheet for kitchen with plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mm x 460mm with bowl size 410mm x 330mm x 160mm incl 32 mm PVC flexible waste pipe complete all as directed.

S&F in repairs waste coupling for sink as per sample approved complete all as directed.

S&F in repairs mirror cabinet (PTMT) fixed on wall with cadmium plated brass screws as per approved by GE all as directed.

S&F in repairs bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Prayag/Cera/Marc.

S&F in repairs for bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe (Min. wt 90 gms) and complete all as specified and directed. Make : Prayag/Poly tuff or equivelant.

S&F in repairs 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 15mm bore, two way angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in reapirs 15mm bore, stop valve external threaded, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed

S&F in repairs PVC flexable waste pipe 32/40 mm dia & approx 900 mm long with PVC waste coupling suitable for WHB, sink & urinal complete all as specified & directed.

S&F in repairs brass CP Wall mixer for mixing hot & cold water suitable for 15mm bore dia pipe screwed down for iron pipe and fixed copmplete all as specified and directed.

Dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia all as per direction by Engr In Charge.

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with MS clamps as per site requirement complete all as directed.

S&F PVC(SWR) Vent cowl 75mm dia complete all as directed.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as directed.

All as per item No 97.00 here in before but fixed to walls with clamps complete all as directed.

S&F PVC (SWR) bends 75mm dia any radius complete all as directed.

S&F PVC (SWR) 75mm dia floor trap, plain with grating including jointing with solvent cement all as directed.

Treatement for sunken portion is as follows :- (i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L for providing 12 mm dia holes of 40mm deep @2.00m c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3, all as specified and as directed by Engineer in-Charge. (iii) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement. (WPC will be measured and paid seperately). (iv) M&L for applyin evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces.(v) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion) etc. (vi) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick. (WPC will be measured and paid separately) on top. (vii) M&L for plastering in CM 1:4, 15 mm thick with water proofing compound at the rate of 2% by weight of cement and finishing the surface seven and fair.(WPC will be measured and paid seperately). Note :- Above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect. (b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated. (c) Horizontal flat area to be measered.

Dismantling Asbestos Cement Corrugated or Semicorrugated in Roof covering all as per direction by Engr In Charge.

Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc, if type 3 or any all as per direction by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs all as per direction by Engr In Charge.

S&F for steel work in tubular section for purlin/rafters etc including special shaped washer etc. complete using induction butt welded tubes conforming to IS 1161-1998 grade St- 240 as specified.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tesile strength of 550 Mpa as in roof covering to wall, fixed with self tapping screws as specified.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified.

S&F for 9mm thick of size 600mm x 600mm HSPC (high pressure steam cured) Pre-primetered self embossed, textured designer board to be fixed & including make Armstrong GI based powder coated snap grid/section size 600mm x 600mm with main runner 38mm x 24mm x 0.9mm thick, cross tee 28.6mm x 24mm x 0.9 mm and wall angle 19x19xo.9 mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper with preparation of sufaces etc complete all as specified.

M&L for 75mm thick cement concrete (1:3:6) type C1 using 20mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.

M&L cement concrete 75mm thick 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified & directed.

M&L for rubber moulded concrete colour tiles with grey cement pigment of size 300 mm x 300 m x 22-25 mm thick laid over and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over sand cushing complete all specified and directed. Note :- Sand cushioning will measured and paid seperately.

Supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 cm thick in each layer complete all as directed.

M&L precast (Factory casted) cement concrete kerb stone casted in PCC (1:2:4) Type B-1 using 20mm graded stone aggregates with plan or interlocking joints (as directed) with solid blocks, exc. 10 cm in width and setting and jointed in cement mortar 1:6 complete all as specified & directed.

M&L for aluminum powder coated (Thickness of powder coating not less than 50 micron) as in ventilators half fixed and half louvers type and small window single leaf cut to size, jointed together with cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections for fixing glass sheet and necessary fittings complete, screws plugs, handle, tower bolt, stay hocks etc all as specified and directed. (Make JINDAL/ HINDALCO). Notes :- (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of glass sheet will be measured seperately.

shiva construction

M/s S Amarjit Singh