Sanitary work for construction of Geological office at Solar Colony U.T Leh Ladakh.

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Dumping stone excluding cost of stones. in Horizontal on level

providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah.

Dry random rubble masonry with hard stone in foundation and plinth.Nasllah

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level :1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. and removal of form work for: a) Edges of slabs and breaks in floors and walls (Above 20 cm wide)

b)Suspended floors, roofs, landings, balconies and access platforms.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in?charge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe , 25mm OD(SDR-7.4)

providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in?charge.)External work including trenching, refilling etc.)PN-16 pipe , 32mm OD (SDR-7.4)

providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in?charge.)External work including trenching, refilling etc.)PN-16 pipe , 40mm OD (SDR-7.4)

providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.

Providing and fixing brass bib cock of approved quality (20 mm nominal bore)

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing & fixing White vitreous china water closet squatting pan(Indian type W.C. pan) with 100mm sand cast Iron P or Strap, 10 ltr low level P.V.C flushing cistern includingh flush pipe (of approved make) "manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.Long pan pattern white vitreous china W.C pan of size 580mm

Providing & fixing White vitreous china pedestal type water closet (Europan type W.C. Pan) with seat and lid, 10 liter low and level white vitreous china flushing cistern and CP flush fittings, C.I/ brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete includinhg painting of fittings and brackets, cutting and making good the walls and floors wherever required.W.C pan with ISI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C.P flish bend.

Providing and fixing white vitreous china flat White P.V.C automatic flushing cistern, of approved make wuth fittings, C.I/M.S brackets, standard size of C.P btrass flush pipe, spreaders with unions ans clamps complete, (all in C.P. brass )_with waste fittinngs as per IS:2556, C.I trap with outlet grating and other couplings in C.P brass including painting wherever reqired . Rannge of two half stall urinals with 5 litre white P.V.C automatic flushing cistern of approved quality.

Providing and fixing wash basin with C.I/M.S brackets, 15mm C,P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and bracjets, cutting and making good the walls wherever required.White vitreous China wash basin size 660x460 mm with single 15mm C.P brass ][illar taps with elbow operated levers ISI marked. (CERA, JAQUAR or equivalent)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception, of pipes and fittings.

Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walkls wherever required. Kitchen sink with drain board. 510x104mm bowl depth 178mm.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm tgick hard board backingh. a)Circular shape 450mm dia

Providing and fixing 600x120x5mm glass shelf edge riund of supported on anodized aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40mm lonng screws, rawl plugs, etc. complete

Providing andf fixing toilet paper holder C.P brass.

Providing and fixing Ceremic glazed floor tiles 300x300mm ( thick to be spedified by the manufactures) of 1st quality conforming to IS:15622 of approved make, laid on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) ibncluding pointing the joints with white, Ivory, Grey Fume Red Brown

Providing and fixing 1st quality ceramic glazed wall tiles xconforming to IS :15622 (thickness to be specified by way the manufacture) opf approved make in all colors, shades except burgunday , bottle green, black of any size as approved byb Engineer-in -charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement s,lurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Wall tiles.

Providing and fxing of heat tape on PPR pipe enforced make or equivalent complete job.

Providing and laying insulation work on PPR by way of using K-Flex inner wall conplete job.

Providing and fixing of materials for the insdulation of sintex of with nitrile tube, tapping with cello tape , Rockwoood 6 inch per side, wire mesh, polythene, tapping with cello tape aluminium sheet 26 gauge cladding with dia of opn contact basis a)1000 ltr

Providing asn lsying of matrials for the insulation of sintex of with nitrile tube, tapping with cellow tape, Rockwood 6 inch per sude, wire mesh, polythene, tapping with cellow tape alumin ium sheet 26 gauge cladding with dia of 2"0"

Carriage of materials by loading, unloading and stacking all complete job. A) Cement and an avg. lead 02 km

B)Sand an avg. lead 12 km

C)Stone Aggre. An avg. lead 10 km

D)Stone an avg lead 12 km

ibrahim sani