Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2Substation

Package Name Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation

Specification No. Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193

1 Fill up only green shaded cells in Sch-1, Sch-2, Sch-3, Sch-4, Sch-7 and Bid Form 2nd Envelope.

2 All the cells in Sch-5 & Sch-6 are auto filled, therefore no cell is required to be filled up there.

3 Instructions / error messages, if any, will be displayed automatically after selecting the cell.

4 After filling up all the schedues, save the file, take print out of all the schedules and Bid form and sign & stamp and submit them as hard copy of the 2nd envelope (Price part) of the bid. Also ensure to submit the soft copy of the the same file on CD/ DVD.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

I While filling up the worksheets following may please be observed :

(i) Fill up only green shaded cells.

(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.

(iii) Select only the options provided in pull down menus.

(iv) Do not link any cell of this work book with any other work book.

(v) Do not use copy & paste or cut & paste options for filling up the data.

(vi) Do not reformat any of the cell of the work book.

II This Workbook consists of following worksheets :

Opening page of the workbook.

Names of Bidder :

● Select Sole Bidder or JV (Joint Venture) from the pull down menu. Do not leave this cell blank.

● Select nos. of the JV Partners other than the Lead Partner from drop down menu.

● In case of JV partners more than 2, enter details of 3rd & more partners along with details of 2nd partner.

● Fill up names and address of the Sole Bidder and /or Joint Venture.

● Fill up date in dd-mmm-yyyy format from drop down menu.

● Click for Sch-1 given at the right top of the worksheet to go to Sch-1.

Sch-1 (Ex-works Prices) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Corresponding cell for mode of transaction shall be come enable only after filling up the unit rate, therefore first fill up the unit rate and then mode of transaction for the corresponding item.

● Select either Direct or Bought-out from the drop down menu. Do not leave the cell blank the same shall be deemed to be Bought-out if the cell is left blank.

● Total amount shall get calculated automatically.

● Type Test charges shall appear automatically after filling up Sch-7 appropriately.

Sch-2 (Freight & Insurance Charges) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-3 (Erection Charges) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-4 (Training Charges) :

● Not applicable, hence no cell is required to be filled up.

Sch-4b (Maintenance Charges during and after Defect Liability Period) :

● Not applicable, hence no cell is required to be filled up.

Sch-5 (Summary of Taxes and Duties applicable on the Goods) :

● No cell is required to be filled in by the bidder in this worksheet.

● Summary of all the Schedules without considering discount (mentioned in the work sheet discount) shall be displayed automatically.

● No cell is required to be filled in by the bidder in this worksheet.

Sch-7 (Type Test Charges) :

● Fill up the rates & location where type tests are proposed.

● Total of this Sch-7 shall automatically appear in Sch-1.

Bid from 2nd Envelope :

● Fill up ref. no. as bidder's ref no. of this letter.

● This letter shall consider the net price as per Sch-6 (After Discount).

● Fill up names & Designation of the representatives of other JV partner(s) if the bidder is JV (Joint Venture) .

● Fill up additional information as required.

Happy Bidding !

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Sole Bidder 1 Sole Bidder 1

Joint Venture 2 or More JV (Joint Venture) 2 or More

Enter following details of the bidder

Specify type of Bidder [Select from drop down menu] Sole Bidder Sole Bidder 1 0 Sole Bidder 1 0

Name of Sole Bidder …….. …….. …….. …….. …….. ……..

Address of Sole Bidder …….. …….. …….. …….. …….. ……..

Name of other Partner - 1

Address of other Partner - 1

Name of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..

Address of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..

email ID of Bid Signatory

Mobile No. of Bid Signatory

Tel No. of Bid Signatory

Fax No. of Bid Signatory

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 1 Schedule - 1 Direct Total 0 Sole Bidder `

BO Total #REF! 0

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002

CIVIL ITEMS Direct

All Prices are in Indian Rupees. Bought-Out

SI. No. PR No PR Line Item No Activity Description Material Code HSN Code HSN CODE (to be filled by bidder) Rate of GST applicable (in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Item Description Unit Qty. Unit Ex-works price (excluding GST) Total Ex-works price (excluding GST) GST Tax as confirmed by Bidder

PART A (Substation Portion)

I SUPPLY ITEMS Revaluation of J column Tax Calculation

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

1 1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil 18 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil SQM 545 Included 0.00 0 0.00

2 2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 18 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. CUM 110 Included 0.00 0 0.00

3 3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 18 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. CUM 87 Included 0.00 0 0.00

4 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 18 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) CUM 63 Included 0.00 0 0.00

5 5 Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns 18 Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns SQM 69 Included 0.00 0 0.00

6 6 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 18 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : Included 0.00 0 0.00

7 7 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) 18 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) CUM 22 Included 0.00 0 0.00

8 8 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete 18 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete CUM 228 Included 0.00 0 0.00

9 9 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 18 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Included 0.00 0 0.00

10 10 Cement mortar 1:6 (1 cement : 6 coarse sand) 18 Cement mortar 1:6 (1 cement : 6 coarse sand) CUM 67 Included 0.00 0 0.00

11 11 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in 18 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in Included 0.00 0 0.00

12 12 cement mortar 1:4 (1 cement : 4 coarse sand) 18 cement mortar 1:4 (1 cement : 4 coarse sand) SQM 224 Included 0.00 0 0.00

13 13 12 mm cement plaster of mix : 18 12 mm cement plaster of mix : Included 0.00 0 0.00

14 14 1:6 (1 cement: 6 fine sand) 18 1:6 (1 cement: 6 fine sand) SQM 224 Included 0.00 0 0.00

15 15 12 mm cement plaster finished with a floating coat of neat cement of mix 18 12 mm cement plaster finished with a floating coat of neat cement of mix Included 0.00 0 0.00

16 16 1:4 (1 cement: 4 fine sand 18 1:4 (1 cement: 4 fine sand SQM 380 Included 0.00 0 0.00

17 17 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 18 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. SQM 380 Included 0.00 0 0.00

18 18 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more 18 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more KG 1892 Included 0.00 0 0.00

19 19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. 18 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. KG 276 Included 0.00 0 0.00

20 20 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 18 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required SQM 802 Included 0.00 0 0.00

21 21 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 18 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete KG 11000 Included 0.00 0 0.00

22 22 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) 18 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) Metre 71 Included 0.00 0 0.00

23 23 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 18 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work SQM 530 Included 0.00 0 0.00

24 24 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 18 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. Included 0.00 0 0.00

25 25 80x1.25 mm M.S. laths with 1.25 mm thick top cover 18 80x1.25 mm M.S. laths with 1.25 mm thick top cover SQM 24 Included 0.00 0 0.00

26 26 Providing and fixing ball bearing for rolling shutters 18 Providing and fixing ball bearing for rolling shutters Nos 4 Included 0.00 0 0.00

27 27 Finishing walls with water proofing cement paint of required shade : 18 Finishing walls with water proofing cement paint of required shade : Included 0.00 0 0.00

28 28 New work (Two or more coats applied @ 3.84 kg/10 sqm) 18 New work (Two or more coats applied @ 3.84 kg/10 sqm) SQM 112 Included 0.00 0 0.00

Total Ex-works Price 0.00 0.00

Total Type Test charges as per Schedule-7 0.00

Total Ex-works Price including Type Test charges 0.00

Total GST Tax as confirmed by Bidder 0.00

Note : Specify amount of GST on the transaction between the Contractor and the Employer.

* In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Place : Printed Name :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 1 Direct Total 0 Sole Bidder `

BO Total #REF! 0

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

(SCHEDULE OF RATES AND PRICES : EX-WORKS PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2

Plant and Equipment (including Mandatory Spares Parts) to be supplied, including Type Test Charges for Tests to be conducted. Direct

All Prices are in Indian Rupees. Bought-Out

SI. No. Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct / Bought-out)

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

Total Ex-Works Price Direct 0.00 Direct

Total Ex-Works Price Bought Out 0.00

Total Ex-Works Price 0.00

Total Type Test charges as per Schedule-7 #REF! #REF! #REF!

Total Ex-works Price including Type Test charges #REF! #REF! #REF!

Discount Sch-1 #REF! MPD Sch-1 #REF!

Dis Alert #REF!

Note : Specify amount of Excise Duty, Sales Tax/'VAT and other taxes payable on the transaction between the Contractor and the Employer and octroi/entry tax as applicable for destination site/state on all items of supply including bought-out finished items (to be identified in the Contract), which shall be dispatched directly from the sub-vendor’s works to the Employer’s site (sale-in-transit), separately in Schedule-5. Excise Duty, Sales tax and other levies for all the bought-out items are to be included in the EXW Price (Col. No. 5) only and not to be indicated in Schedule-5.

Place : Printed Name :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 2

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : NOT APPLICABLE To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002

LOCAL TRANSPORTATION, IN-TRANSIT INSURANCE, LOADING AND UNLOADING

All Prices are in Indian Rupees.

SI. No. PR No PR Line Item No Activity Description Material Code Description Unit Quantity Unit Freight, In-transit Insurance, loading & unloading Charges Total Freight, In-transit Insurance, loading & unloading Charges

PART A (Substation Portion)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

1 Erection Hardware for 400kV I type layout-Bus Work (For two diameters)as per technical specification 1 Included

2 Erection Hardware for 400kV I type layout-Line bay as per technicalspecification 2 Included

3 Erection Hardware for 400kV I type layout-Spare bay of half dia as pertechnical specification 3 Included

4 400KV SUSPENSION INSULATOR STRING AND ASSOCIATED HARDWARE FITTINGSWITH DROP CLAMP SUITABLE FOR QUAD CONDUCTOR 4 Included

5 Air conditioning system for Switchyard Panel Room of 6m length 5 Included

6 4.5 kg CO2 type Portable Fire extinguisher 6 Included

7 Fire Detection and Alarm System for Switchyard Panel Room of 6 mlength 7 Included

8 Illumination System for switchyard panel room of 6 m length 8 Included

9 LED FLOOD LIGHT LUMINARIESTYPE FL-1 (150W) AS PER TECHNICALSPECIFICATION 9 Included

10 LIGHTING FIXTURE LED LUMINAIRES TYPE FL2 AS PER TECH. SPECIFICATIONS 10 Included

11 Lighting Panel type ACP-2 as per technical specification 11 Included

12 Sub Lighting panel (outdoor) type SLP (Switchyard and Street Lighting) 12 Included

13 40 MM MS ROD FOR MAIN EARTHMAT 13 Included

14 COLOR IP CAMERA, WITH PAN, TILT AND ZOOM FACILITIES, ALONGWITH ALLREQUIRED ITEMS, ACCESSORIES, LINE INTERFACE UNITS, FIBER PATCH CORDS,POWER SUPPLY UNITS, JUNCTION BOXES, CABLES, FIBER OPTIC CABLES, ETC.,AND INCLUDING INTEGRATION IN EXISTING HARDWARE AND SOFTWARE FORAUGMENTATION OF VISUAL MONITORING SYSTEM AS PER TECHNICALSPECIFICATION. 14 Included

15 1.1KV GRADE 3CX2.5 SQMM CONTROL CABLE 15 Included

16 1.1KV GRADE 5CX2.5 SQMM CONTROL CABLE 16 Included

17 1.1KV GRADE 10CX2.5 SQMM CONTROL CABLE 17 Included

18 1.1KV GRADE 19CX1.5 SQMM CONTROL CABLE 18 Included

19 1.1KV GRADE 27CX1.5 SQMM CONTROL CABLE 19 Included

20 4PAIR, 0.5 SQ.MM SCREENED CABLE 20 Included

21 1.1KV GRADE 3.5CX70 SQMM (PVC) POWER CABLE 21 Included

22 1.1KV GRADE 2CX6 SQMM (PVC) POWER CABLE 22 Included

23 1.1KV GRADE 4CX6 SQMM (PVC) POWER CABLE 23 Included

24 ETHERNET INTERFACE 10/100 BASE T WITH LAYER-2 SWITCHING (MIN 8INTERFACES PER CARD) 24 Included

25 24F (DWSM) APPROACH FIBRE OPTIC CABLE 25 Included

26 GI PIPE INSTALLATION HARDWARE FOR APPROACH CABLING 26 Included

27 GI ELBOW INSTALLATION HARDWARE FOR APPROAH CABLING 27 Included

28 GI FLEXIBLE CONDUIT INSTALLATION HARDWARE FOR APPROAH CABLING 28 Included

29 SUBSTATION GRADE LAYER 2 LAN SWITCH 29 Included

30 SUBSTATION GRADE LAYER 3 LAN SWITCH 30 Included

31 WAMS Miscellaneous - Armored Fibre Optic Cable and associatedtermination (e.g. L2 Switch) for connecting PMU panels located indifferent control room of a station 31 Included

32 LIU - FO PATCH PANEL-12 PORT 32 Included

33 1.1KV GRADE 4CX16 SQMM (PVC) POWER CABLE 33 Included

Total F&I Price 0.00

Place: Printed Name :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 2 Dis

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 As per Lum-sum 0

(SCHEDULE OF RATES AND PRICES : FREIGHT & INSURANCE CHARGES) AS per Percent #REF!

As per lum-sum on Sch-2 0.00%

Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-2 #REF!

Contracts Services, 3rd Floor Total Discount #REF!

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002 Multipackage Discount 0.00%

All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)

SI. No. Description Unit Quantity Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

Total F&I Price #REF!

Place : Printed Name :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 3

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!

As per lum-sum on Sch-3 0.00%

Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-3 #REF!

Contracts Services, 3rd Floor Total Discount #REF!

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002 Multipackage lum-sum 0.00%

INSTALLATION CHARGES Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)

All Prices are in Indian Rupees.

SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) SAC CODE (to be filled by bidder) Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Charges Total Charges Total GST as confirmed by Bidder Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges

PART A (Substation Portion)

I ELECTRICAL ITEMS Revaluation of J column Tax Calculation

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

1 420kV, 3150A, 63KA, Isolator (3-phase)(Double Break) with one E/S 1 420kV, 3150A, 63KA, Isolator (3-phase)(Double Break) with one E/S 1 Installation, testing and commissioning of pre-wired, fluorescent fitting/LED/ compact fluorescent fitting of all types, comlete with all accessories and tube etc. directly on celing/ wall, including connection with 1.5 Sq. mm FRLS PVC insulated, copper conductor, sigle core cable and 18 Installation, testing and commissioning of pre-wired, fluorescent fitting/LED/ compact fluorescent fitting of all types, comlete with all accessories and tube etc. directly on celing/ wall, including connection with 1.5 Sq. mm FRLS PVC insulated, copper conductor, sigle core cable and Each 4 Included 0.00 0 0

2 420 kV, 3000A, 63KA, 1-Phase CurrentTransformer with 120% extended currentrating 2 420 kV, 3000A, 63KA, 1-Phase CurrentTransformer with 120% extended currentrating 2 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as req 18 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as req Each 4 Included 0.00 0 0

3 420 kV Bus Post Insulator (Except for wave traps) 3 420 kV Bus Post Insulator (Except for wave traps) 3 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 18 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. Each 4 Included 0.00 0 0

4 420kV, 3150A, 63kA Circuit Breaker(3-Phase) without closing resistor(with support structure) 4 420kV, 3150A, 63kA Circuit Breaker(3-Phase) without closing resistor(with support structure) 4 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed Medium duty PVC conduit , with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required 18 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed Medium duty PVC conduit , with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Included 0.00 0 0

Erection Hardware for 400kV I type layout-Bus Work (For two diameters)/bays as per specification 5 Erection Hardware for 400kV I type layout-Bus Work (For two diameters)/bays as per specification 5 Group A 18 Group A Point 4 Included 0.00 0 0

Erection Hardware for 400kV I type layout-Transformer Bay as per specification 6 Erection Hardware for 400kV I type layout-Transformer Bay as per specification 6 Group B 18 Group B Point 4 Included 0.00 0 0

5 Erection Hardware for 400kV I type layout-Spare bay of half dia as per specification 7 Erection Hardware for 400kV I type layout-Spare bay of half dia as per specification 7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class medium class PVC conduitas required . 18 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class medium class PVC conduitas required . Included 0.00 0 0

400KV SUSPENSION INSULATOR STRING AND ASSOCIATED HARDWARE FITTINGS WITH DROP CLAMP SUITABLE FOR QUAD CONDUCTOR 8 400KV SUSPENSION INSULATOR STRING AND ASSOCIATED HARDWARE FITTINGS WITH DROP CLAMP SUITABLE FOR QUAD CONDUCTOR 8 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 18 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 20 Included 0.00 0 0

400KV TENSION INSULATOR STRING AND ASSOCIATED HARDWARE FITTINGS WITH TURN BUCKLE SUITABLE FOR QUAD CONDUCTOR 9 400KV TENSION INSULATOR STRING AND ASSOCIATED HARDWARE FITTINGS WITH TURN BUCKLE SUITABLE FOR QUAD CONDUCTOR 9 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 18 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 20 Included 0.00 0 0

6 400KV TENSION INSULATOR STRING AND ASSOCIATED HARDWARE FITTINGS WITHOUT TURN BUCKLE SUITABLE FOR QUAD CONDUCTOR 10 400KV TENSION INSULATOR STRING AND ASSOCIATED HARDWARE FITTINGS WITHOUT TURN BUCKLE SUITABLE FOR QUAD CONDUCTOR 10 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 18 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required Included 0.00 0 0

400kV Circuit Breaker Relay Panel (with Automation) 11 400kV Circuit Breaker Relay Panel (with Automation) 11 5/6 A switch 18 5/6 A switch Each 4 Included 0.00 0 0

Augmentation of existing 400kV bus bar protection scheme.(No. of bays as per specification)-(with Automation) 12 Augmentation of existing 400kV bus bar protection scheme.(No. of bays as per specification)-(with Automation) 12 15/16 A switch 18 15/16 A switch Each 4 Included 0.00 0 0

Augmentation of Substation automation System for 400kV Main bay as per Technical Specification : Other Make 13 Augmentation of Substation automation System for 400kV Main bay as per Technical Specification : Other Make 13 3 pin 5/6 A socket outlet 18 3 pin 5/6 A socket outlet Each 4 Included 0.00 0 0

Augmentation of Substation automation System for 400kV Tie bay as per Technical Specification : Other Make 14 Augmentation of Substation automation System for 400kV Tie bay as per Technical Specification : Other Make 14 6 pin 15/16 A socket outlet 18 6 pin 15/16 A socket outlet Each 4 Included 0.00 0 0

7 Air conditioning system for Switchyard Panel Room of 6m length 15 Air conditioning system for Switchyard Panel Room of 6m length 15 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 18 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Each 4 Included 0.00 0 0

8 4.5 kg CO2 type Portable Fire extinguisher 16 4.5 kg CO2 type Portable Fire extinguisher 16 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required 18 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required Included 0.00 0 0

Fire Detection and Alarm System for Switchyard Panel Room of 6 m length 17 Fire Detection and Alarm System for Switchyard Panel Room of 6 m length 17 3 Module 18 3 Module Each 4 Included 0.00 0 0

9 Illumination System for switchyard panel room of 6 m length 18 Illumination System for switchyard panel room of 6 m length 18 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required 18 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required Included 0.00 0 0

LED Flood Light Luminaries Type-FL-1 as per technical specification 19 LED Flood Light Luminaries Type-FL-1 as per technical specification 19 40 A 18 40 A Each 1 Included 0.00 0 0

10 LED Flood Light Luminaries Type FL-2 (250W) as per technical specification 20 LED Flood Light Luminaries Type FL-2 (250W) as per technical specification 20 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without 18 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without Included 0.00 0 0

Sub Lighting panel (outdoor) type SLP (Switchyard and Street Lighting) 21 Sub Lighting panel (outdoor) type SLP (Switchyard and Street Lighting) 21 6 way, Double door 18 6 way, Double door Each 1 Included 0.00 0 0

22 Lighting Panel type ACP-2 as per technical specification 22 Lighting Panel type ACP-2 as per technical specification 22 18 sqm 18 Included 0.00 0 0

23 40 mm MS rod for Main Earthmat 23 40 mm MS rod for Main Earthmat 23 18 cum 0.3 Included 0.00 0 0

24 Color IP camera, with PAN, TILT and ZOOM facilities, alongwith all required Items, Accessories, Line Interface units, Fiber patchcords, Power supply units, Junction Boxes, Cables, Fiber Optic Cables, etc., and including Integration in existing Hardware andSoftware for Augmentation of Visual Monitoring System as per technical specification. 24 Color IP camera, with PAN, TILT and ZOOM facilities, alongwith all required Items, Accessories, Line Interface units, Fiber patchcords, Power supply units, Junction Boxes, Cables, Fiber Optic Cables, etc., and including Integration in existing Hardware andSoftware for Augmentation of Visual Monitoring System as per technical specification. 24 18 each 10 Included 0.00 0 0

25 Excavation in all kind of soil including rock for all leads and lifts, backfilling, disposal of surplus earth within a lead up to2Km as per technical specification. The surplus earth shall be roughly graded . 25 Excavation in all kind of soil including rock for all leads and lifts, backfilling, disposal of surplus earth within a lead up to2Km as per technical specification. The surplus earth shall be roughly graded . 25 18 each 5 Included 0.00 0 0

26 Providing and laying of Plain Cement Concrete (PCC) (1:4:8) 26 Providing and laying of Plain Cement Concrete (PCC) (1:4:8) 26 18 each 20 Included 0.00 0 0

27 Providing and laying of Plain Cement Concrete (PCC) (1:2:4) 27 Providing and laying of Plain Cement Concrete (PCC) (1:2:4) 27 18 kg 100 Included 0.00 0 0

28 Providing and laying Plain Cement Concrete 1:5:10 (1 cement : 5 sand : 10 brick aggregate) 28 Providing and laying Plain Cement Concrete 1:5:10 (1 cement : 5 sand : 10 brick aggregate) 28 18 kg 100 Included 0.00 0 0

29 Providing and laying of Reinforced Cement Concrete M25 mix including pre cast, shuttering, Grouting of pockets & underpinning butexcluding steel reinforcement 29 Providing and laying of Reinforced Cement Concrete M25 mix including pre cast, shuttering, Grouting of pockets & underpinning butexcluding steel reinforcement 29 18 SQM 150 Included 0.00 0 0

30 Steel Reinforcement 30 Steel Reinforcement 30 18 sqm 25.2 Included 0.00 0 0

31 Misc. Structural steel including rails, embedments, edge protection angles, gratings etc. but excluding the reinforcement steel andsteel for lattice and pipe structures. 31 Misc. Structural steel including rails, embedments, edge protection angles, gratings etc. but excluding the reinforcement steel andsteel for lattice and pipe structures. 31 18 metre 66 Included 0.00 0 0

32 Stone spreading in switchyard excluding PCC 32 Stone spreading in switchyard excluding PCC 32 18 each 10 Included 0.00 0 0

33 Antiweed treatment 33 Antiweed treatment 33 18 each 10 Included 0.00 0 0

34 Cable Trench including all types of crossings, all metallic works and sump pit including concrte and reinforcement steel Section 2-2 34 Cable Trench including all types of crossings, all metallic works and sump pit including concrte and reinforcement steel Section 2-2 34 18 each 50 Included 0.00 0 0

35 Cable Trench including all types of crossings, all metallic works and sump pit including concrte and reinforcement steel Section 3-3 35 Cable Trench including all types of crossings, all metallic works and sump pit including concrte and reinforcement steel Section 3-3 35 18 sqm 30 Included 0.00 0 0

36 Cable Trench including all types of crossings, all metallic works and sump pit including concrte and reinforcement steel Section 4-4 36 Cable Trench including all types of crossings, all metallic works and sump pit including concrte and reinforcement steel Section 4-4 36 18 sqm 30 Included 0.00 0 0

37 Switchyard Panel Room - Civil Works. All civil works as per drawing and specifications complete, including - brickwork, finishing(external and internal), windows etc. However, excavation, PCC, RCC and reinforcement shall be paid separately as per BPS. 37 Switchyard Panel Room - Civil Works. All civil works as per drawing and specifications complete, including - brickwork, finishing(external and internal), windows etc. However, excavation, PCC, RCC and reinforcement shall be paid separately as per BPS. 37 18 sqm 20 Included 0.00 0 0

38 Earthwork in excavation & filling in all types of soil and soft/disintegrated rock in open areas/nallas/channels, to the requiredslopes, shapes, levels, elevations and profile, including trimming of bottom and slopes of excavation, bailing out rain(dewatering), pumping, removal of slush, preparing embankments/marginal banks, loosening, dressing, spreading material in layers notexceeding 200mm, as per direction of Engineer-in-Charge, water flooding, compacting to achieve 95% consolidation at optimum moisturecontent, finishing etc. all complete, for all leads and lifts within leveling boundary, including disposal of surplus earth andstacking of unsuitable material within a lead of 2.0 Km beyond substation boundary, with all labour, material, tools, tackles andequipment, safeguards and incidentals, Royalty,taxes etc. as necessary, as per drawings, specification and directions of theEngineer-in-Charge. Clearing of jungle is included in this item. (Only excavation/cutting will be measured for payment purpose.) 38 Earthwork in excavation & filling in all types of soil and soft/disintegrated rock in open areas/nallas/channels, to the requiredslopes, shapes, levels, elevations and profile, including trimming of bottom and slopes of excavation, bailing out rain(dewatering), pumping, removal of slush, preparing embankments/marginal banks, loosening, dressing, spreading material in layers notexceeding 200mm, as per direction of Engineer-in-Charge, water flooding, compacting to achieve 95% consolidation at optimum moisturecontent, finishing etc. all complete, for all leads and lifts within leveling boundary, including disposal of surplus earth andstacking of unsuitable material within a lead of 2.0 Km beyond substation boundary, with all labour, material, tools, tackles andequipment, safeguards and incidentals, Royalty,taxes etc. as necessary, as per drawings, specification and directions of theEngineer-in-Charge. Clearing of jungle is included in this item. (Only excavation/cutting will be measured for payment purpose.) 38 18 sqm 10 Included 0.00 0 0

39 Drain including culverts but excluding concrete & reinforcement steel-Section A-A 39 Drain including culverts but excluding concrete & reinforcement steel-Section A-A 39 18 sqm 90 Included 0.00 0 0

40 Drain including culverts but excluding concrete & reinforcement steel-Section B-B 40 Drain including culverts but excluding concrete & reinforcement steel-Section B-B 40 18 metre 250 Included 0.00 0 0

41 Drain including culverts but excluding concrete & reinforcement steel-Section C-C 41 Drain including culverts but excluding concrete & reinforcement steel-Section C-C 41 18 metre 50 Included 0.00 0 0

42 Drain including culverts but excluding concrete & reinforcement steel-Section D-D 42 Drain including culverts but excluding concrete & reinforcement steel-Section D-D 42 18 metre 50 Included 0.00 0 0

43 RCC culvert crossings including supplying and laying hume pipe 250mm dia of grade (NP-3) excluding concrete as per specification. 43 RCC culvert crossings including supplying and laying hume pipe 250mm dia of grade (NP-3) excluding concrete as per specification. 43 18 metre 50 Included 0.00 0 0

44 RCC culvert crossings including supplying and laying hume pipe 300mm dia of grade (NP-3) excluding concrete as per specification. 44 RCC culvert crossings including supplying and laying hume pipe 300mm dia of grade (NP-3) excluding concrete as per specification. 44 18 metre 50 Included 0.00 0 0

45 RCC culvert crossings including supplying and laying hume pipe 450mm dia of grade (NP-3) excluding concrete as per specification. 45 RCC culvert crossings including supplying and laying hume pipe 450mm dia of grade (NP-3) excluding concrete as per specification. 45 18 metre 50 Included 0.00 0 0

46 Erection of Lattice Structures (MS Steel), to be designed during detailed engineering, for towers, beams and equipment supportstructure including pack plates / packwashers and gusset plates excluding fasteners and foundation bolts 46 Erection of Lattice Structures (MS Steel), to be designed during detailed engineering, for towers, beams and equipment supportstructure including pack plates / packwashers and gusset plates excluding fasteners and foundation bolts 46 18 each 8 Included 0.00 0 0

47 Erection of fasteners ( nuts, bolts and washers ) including step bolts for lattice and pipe structures to be designed duringdetailed engineering 47 Erection of fasteners ( nuts, bolts and washers ) including step bolts for lattice and pipe structures to be designed duringdetailed engineering 47 18 each 8 Included 0.00 0 0

48 Supply & erection of Erection of foundation bolts including nuts, checknut and washers for lattice and pipe structures to be designed during detailedengineering 48 Supply & erection of Erection of foundation bolts including nuts, checknut and washers for lattice and pipe structures to be designed during detailedengineering 48 18 each 5 Included 0.00 0 0

49 Ethernet Interface 10/100 Base T with Layer-2 switching (Min 8 Interfaces per card) 49 Ethernet Interface 10/100 Base T with Layer-2 switching (Min 8 Interfaces per card) 49 18 each 3 Included 0.00 0 0

50 Fibre Optic Approach cabling: Including installation hardware like GI pipe, elbow, conduits, accessories etc.: 24 Fibre 50 Fibre Optic Approach cabling: Including installation hardware like GI pipe, elbow, conduits, accessories etc.: 24 Fibre 50 18 each 2 Included 0.00 0 0

51 SUBSTATION GRADE Layer 2 LAN SWITCH 51 SUBSTATION GRADE Layer 2 LAN SWITCH 51 18 each 8 Included 0.00 0 0

52 SUBSTATION GRADE Layer 3 LAN SWITCH 52 SUBSTATION GRADE Layer 3 LAN SWITCH 52 18 each 10 Included 0.00 0 0

53 Services:- Armored Fibre Optic Cable and associated termination equipment 53 Services:- Armored Fibre Optic Cable and associated termination equipment 53 18 each 8 Included 0.00 0 0

54 SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF LIU-FO PATCH PANEL-12 PORT 54 SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF LIU-FO PATCH PANEL-12 PORT 54 18 metre 50 Included 0.00 0 0

55 1.1kV grade Power Cables (PVCinsulated)along withlugs,glands,straight joints &accessories,etc. 55 1.1kV grade Power Cables (PVCinsulated)along withlugs,glands,straight joints &accessories,etc. 55 18 each 5 Included 0.00 0 0

56 1.1kV grade Control Cables (PVCinsulated) along withlugs,glands,straight joints &accessories,etc. 56 1.1kV grade Control Cables (PVCinsulated) along withlugs,glands,straight joints &accessories,etc. 56 18 metre 11 Included 0.00 0 0

Total Charges 0.00 0 0

Total GST as confirmed by Bidder 0.00

* In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Place : Printed Name :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 3

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES : ERECTION CHARGES) AS per Percent #REF!

As per lum-sum on Sch-3 0.00%

Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-3 #REF!

Contracts Services, 3rd Floor Total Discount #REF!

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002 Multipackage lum-sum 0.00%

All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)

SI. No. Description Unit Quantity Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! (a) Detailed Soil Investigation

#REF! #REF! #REF! #REF! #REF! (b) All kinds of soil except fissured rock & hard rock

#REF! #REF! #REF! #REF! #REF! (e) River Crossing Location

#REF! #REF! #REF! #REF! #REF! (f)

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

Total Erection Price (A+B) #REF!

Place : Printed Name :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 4

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

(SCHEDULE OF RATES AND PRICES )

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002

Training Charges for Training to be imparted

SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Training Charges excluding GST Total Training Charges excluding GST Total GST as confirmed by Bidder

Revaluation of J column Tax Calculation

NOT APPLICABLE Revaluation of J column Tax Calculation

Included 0.00 0 0

Total Training Charges 0.00 0

Total GST as confirmed by Bidder 0.00

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 4b

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

(SCHEDULE OF RATES AND PRICES )

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002

Maintenance Charges during & after Defect Laibility Period

SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Maintenance Charges excluding GST Total Maintenance Charges excluding GST Total GST as confirmed by Bidder

0 Revaluation of P column Tax Calculation

A. #REF! Revaluation of P column Tax Calculation

1 Included 0.00 0 0

2 Included 0.00 0 0

3 Included 0.00 0 0

4 Included 0.00 0 0

B. #REF! Revaluation of P column Tax Calculation

1 Included 0.00 0 0

2 Included 0.00 0 0

3 Included 0.00 0 0

4 Included 0.00 0 0

Total Maintenance Charges during and after Defect Liabilty Period 0.00 0

Total GST as confirmed by Bidder 0.00

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 5

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

(SUMMARY OF TAXES & DUTIES APPLICABLE

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002

Sl. No. Item Nos. Total Price (INR) After Discount After MPDiscount

1 TOTAL GST ON GOODS Excise Duty #REF! Excise Duty #REF!

Total GST on Schedule-1 0.00

2 TOTAL GST ON SERVICES Sales Tax 0.00 Sales Tax 0.00

Total GST on Schedule-3 0.00 #REF! 0 #REF! 0

GRAND TOTAL [1+2] 0.00 Grand Total after Discount #REF! Grand Total after MPD #REF!

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 5

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

SUMMARY OF TAXES & DUTIES APPLICABLE ON GOODS

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002

Sl. No. Item Nos. Total Price (INR)

1 TOTAL GST ON GOODS 0.00

Total GST for Supply of Goods (inter-alia including Type Test Charges) between the Contractor and the Employer (identified in Schedule 1') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable.

2 TOTAL GST ON SERVICES 0.00

Total GST on Installation Services (Schedule-3), Training to be imparted in India (Schedule-4a) and Maintenance Charges during and after Defect Liabilty Period (Schedule-4b)

GRAND TOTAL [1+2] 0.00

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 6

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

(GRAND SUMMARY)

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002

Sl. No. Description Total Price (INR)

1 TOTAL SCHEDULE NO. 1 0.00

2 TOTAL SCHEDULE NO. 2 0.00

3 TOTAL SCHEDULE NO. 3 0.00

4 TOTAL SCHEDULE NO. 4 0.00

4b TOTAL SCHEDULE NO. 4b 0.00

Maintenance Charges during & after Defect Laibility Period

5 TOTAL SCHEDULE NO. 5 0.00

Taxes and Duties

6 TOTAL SCHEDULE NO. 7 0.00

GRAND TOTAL [1+2+3+4+5] 0.00

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule - 6 After Discount

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

(GRAND SUMMARY)

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002

Sl. No. Description Total Price (INR)

1 TOTAL SCHEDULE NO. 1 0.00

2 TOTAL SCHEDULE NO. 2 0.00

3 TOTAL SCHEDULE NO. 3 0.00

4 TOTAL SCHEDULE NO. 4 0.00

4b TOTAL SCHEDULE NO. 4b 0.00

Maintenance Charges during & after Defect Laibility Period

5 TOTAL SCHEDULE NO. 5 0.00

Taxes and Duties

6 TOTAL SCHEDULE NO. 7 0.00

GRAND TOTAL [1+2+3+4+5] 0.00

Date : -- Printed Name :

Place : Designation :

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Schedule 7

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!

As per lum-sum on Sch-7 0.00%

Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-7 #REF!

Contracts Services, 3rd Floor Total Discount #REF!

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002 Multipackage Discount 0.0000%

Type tests on Earthwire, Hardwar Fittings & accessories of conductor & earthwire:

SL. NO. PR No Line Item No Code HSN Code Whether HSN in column ‘2’ is confirmed. If not indicate applicable the HSN code * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) Total GST as confirmed by Bidder Revaluation of M column Tax Calculation Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)

1 Included 0.00 0 0.00

2 Included 0.00 0 0.00

TOTAL TYPE TEST CHARGES 0.00

Total GST as confirmed by Bidder 0.00

Date : -- Printed Name :

Place : Designation :

Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 0 0

(SCHEDULE OF RATES AND PRICES ) 0 0

Bidder’s Name and Address (Sole Bidder) :

SL. NO. Description of Test #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 As per Lum-sum 0.00%

(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) AS per Percent #REF!

As per lum-sum on Sch-7 0.00%

Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-7 #REF!

Contracts Services, 3rd Floor Total Discount #REF!

Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,

Address : …….. …….. …….. …….. …….. …….. SCO Bay 5-10, near Haryana Pollution Control board Office,

…….. …….. …….. …….. …….. …….. Sector 16A, Faridabad, Haryana 121002 Multipackage Discount 0.0000%

Type Tests on Earthwire

SL. NO. Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)

(a) #REF! #REF! #REF! #REF! #REF!

(b) #REF! #REF! #REF! #REF! #REF!

Sub-Total (I) #REF!

TOTAL TEST CHARGES (I) #REF!

Discount Sche-7 #REF! MPD Sche-7 #REF!

Dis Alert #REF!

Date : -- Printed Name :

Place : Designation :

Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 0 0 0

(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) 0 0 0

Bidder’s Name and Address (Sole Bidder) : 0

SL. NO. Description of Test 0

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Letter of Discount

LETTER OF DISCOUNT

Contract Services

Power Grid Corporation of India Ltd.,

Rajasthan Projects Office, 4th Floor, REIL House,

Shipra Path, Mansarovar, Jaipur-302020 Rajasthan

Subject : Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2

With reference to the subject tender, we hereby offer unconditional discount on the prices quoted by us as per details given here below : Eq Weightage of Rs/ % Final Discount Factor

1 Discount on lum-sum basis on total price quoted by us without Taxes & Duties. [The discount shall be proportionately applicable on all the items of all the Schdules i.e. Sch-1 (without type test charges), Sch-2, Sch-3, Sch-4a, Sch-4b & Sch-7] In Rs. 0.00 0.0000000000%

2 Discount on percent basis on total price quoted by us without Taxes & Duties. [The discount shall be applicable on all the items of all the Schdules i.e. Sch-1 (without type test charges), Sch-2 , Sch-3, Sch-4a, Sch-4b & Sch-7] In Percent (%) 0.00 0.00%

3 Discount on lum-sum basis on the Schedules as given below : [The discount shall be proportionately applicable on all the relevent items of the respective Schdules.] In Rs.

Schedule-1 : Ex works prices In Rs. 0.00 0.0000000000% Schedule-1 : Ex-Works Price 0.0000000000%

Schedule-2 : Freight & Insurance In Rs. 0.00 0.0000000000% Schedule-2 : Freight & Insurance 0.0000000000%

Schedule-3 : Erection Charges In Rs. 0.00 0.0000000000% Schedule-3 : Erection Charges 0.0000000000%

Schedule-4a : Training Charges In Rs. 0.00 0.0000000000% Schedule-4a : Training Charges 0.0000000000%

Schedule-4b : Maintenance Charges during and after DLP In Rs. 0.00 0.0000000000% Schedule-4b : Maintenance Charges 0.0000000000%

Schedule-7 : Type Test Charges In Rs. 0.00 0.0000000000% Schedule-7 : Type Test Charges 0.0000000000%

4 Discount on percent basis on the Schedules as given below : [The discount shall be applicable on all the relevent items of the respective Schdules.] In Percent (%)

Schedule-1 : Ex works prices In Percent (%) 0.00 0.00%

Schedule-2 : Freight & Insurance In Percent (%) 0.00 0.00%

Schedule-3 : Erection Charges In Percent (%) 0.00 0.00%

Schedule-4a : Training Charges In Percent (%) 0.00 0.00%

Schedule-4b : Maintenance Charges during and after DLP In Percent (%) 0.00 0.00%

Schedule-7 : Type Test Charges In Percent (%) 0.00 0.00%

Discount(s) offered at sl. No. 1 to 4 will get displayed and accounted for automatically in the respective items of the Schedules.

5 We hereby offer Multi-package discount as given below:

Multi-Package Discount(s) offered at sl. No. 5 will not get automatically accounted for in the respective items of the Schedules. The same shall be worked out saparately for evaluation.

Please consider this letter of discount as the integral part of our price bid.

Thanking you, we remain,

Yours faithfully,

For and on behalf of …….. …….. …….. …….. …….. ……..

Date : -- Printed Name :

Place : Designation :

Details of Octroi

Sl No. Description of Items Amount on which Octroi is applicable Rate of Octroi Octroi

Details of Entry Tax

Sl No. Description of Items Amount on which Entry Tax is applicable Rate of Entry Tax Entry Tax

Details of Other Taxes & Duties

Sl No. Description of Items Amount on which Other Taxes & Duties are applicable Description of Taxes & Duties Rate of Taxes & Duties Amount of Taxes & Duties

Tender Enquiry No.: NR1/NT/W-CIVIL/DOM/I00/26/03989- SRM RFX --5002005193 Bid Form 2nd Envelope Sole Bidder 1 st 1 January

0 2 nd 2 February

BID FORM (Second Envelope) 3 rd 3 March

Bid Proposal Ref. No. 5 th 5 May

Date : -- 6 th #VALUE! 6 June

7 th #VALUE! 7 July

To: 8 th #VALUE! 8 August

Contracts Services, 3rd Floor 9 th #VALUE! 9 September

Power Grid Corporation of India Ltd., 10 th 10 October

SCO Bay 5-10, near Haryana Pollution Control board Office, 11 th 11 November

Sector 16A, Faridabad, Haryana 121002 12 th 12 December

Name of Contract : Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 15 th

Dear Ladies and/or Gentlemen, 16 th

Schedule 1 Plant and Equipment (Including Mandatory Spare Parts) to be supplied, including Type Test Charges. 21 st

Schedule 2 Local Transportation, In-transit Insurance, loading and unloading 22 th

Schedule 3 Installation Charges. 23 th

Schedule 4 Training charges for training to be imparted. 24 th

Schedule 4b Maintenance Charges during & after Defect Laibility Period.

Schedule 5 Taxes and Duties not included in Schedule 1 25 th

Schedule 6 Grand Summary [Schedule 1to 5] 26 th

Schedule 7 Break-up of Type Test Charges for Type Tests to be conducted 27 th

2.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced. 31 st

3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

3.1 100% of applicable Taxes and Duties i.e GST which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 1

5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of …….. …….. …….. …….. …….. ……..

Date : -- Printed Name :

Place : Designation :

In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him.

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

STATEMENT OF QUOTED / CORRECTED PRICES

All Figures are in Rupees

Sl. No. Price Component Quoted Price Corrected Price

1 TOTAL SCHEDULE NO. 1:Ex-Works Price of Plant and Equipment including Type Test Charges 0.00 0.00

2 TOTAL SCHEDULE NO.2: Local Transportation, Insurance and other Incidental Services. 0.00 0.00

3 TOTAL SCHEDULE NO.3: Installation Charges 0.00 0.00

4 TOTAL SCHEDULE NO.4: Training Charges Not Applicable Not Applicable

5 TOTAL BID PRICE: (Excluding Taxes & Duties) 0.00 0.00

6 DISCOUNT #REF! #REF! #REF!

7 NET BID PRICE (Excluding Taxes & Duties) #REF! #REF!

8 TAXES & DUTIES PAYABLE ADDITIONALLY

A) EXCISE DUTY 0 0.00

B) CENTRAL SALES TAX 0 0.00

C) VAT #REF! 0.00

D) ENTRY TAX / OCTROI #REF! 0.00

F) TOTAL TAXES & DUTIES #REF! 0.00

8 TOTAL BID PRICE (INCLUDING TAXES & DUTIES) #REF! 0.00

9 TOTAL SCHEDULE NO.7: Type Test Charges [Total of this Schedule is included in Schedule-1 above] 0.00 0.00

I) Bidder has indicated the following taxes and duties additionally applicable for their bid:

Excise Duty % as Excise Duty

#REF! VAT #REF! #REF!

#REF! Entry Tax/ Octroi #REF! #REF!

Others as Others

II) With regard to Entry Tax, it may be mentioned that the substations covered under the subject pacakge falls in State of MP, where an entry tax @ 2% of Purchase Price is applicable. In view of the above, the taxes and duties inter-alia including entry tax applicable for the bids are calculated :

a) Ex-Works Price of Direct Supplies (after discount, if any) Rs. 0

b) Excise Duty, as applicable on (a) above at the rate : 10.00% Rs. 0

c) Amount on which Sales Tax is applicable 0.00 0

d) CST, as applicable on (a) + ED (b) above at the rate : 2.00% Rs. 0

e) VAT, as applicable on (a) + ED (b) above at the rate : 1.00% 0

g) Purchase Price for Entry Tax (Total Ex-Works+F&I+ED+CST+Others) Rs. 0

h) Entry Tax, as applicable on (e) above at the rate : Rs. 0.00

Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation Statement of Quoted / Corrected Prices Page

Spec. No. Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)

STATEMENT OF QUOTED / CORRECTED PRICES

All Figures are in Rupees

Sl. No. Price Component Quoted Price Corrected Price

1 TOTAL SCHEDULE NO. 1:Ex-Works Price of Plant and Equipment including Type Test Charges 0.00 0.00

2 TOTAL SCHEDULE NO.2: Local Transportation, Insurance and other Incidental Services. 0.00 0.00

3 TOTAL SCHEDULE NO.3: Installation Charges 0.00 0.00

4 TOTAL SCHEDULE NO.4: Training Charges Not Applicable Not Applicable

5 TOTAL BID PRICE: (Excluding Taxes & Duties) 0.00 0.00

6 DISCOUNT #REF! #REF!

7 NET BID PRICE (Excluding Taxes & Duties) #REF! #REF!

8 TAXES & DUTIES PAYABLE ADDITIONALLY

A) EXCISE DUTY #REF! 0.00

B) CENTRAL SALES TAX /VAT #REF! #REF!

C) ENTRY TAX / OCTROI #REF! #REF!

D) OTHERS #REF! 0.00

E) TOTAL TAXES & DUTIES #REF! #REF!

8 TOTAL BID PRICE (INCLUDING TAXES & DUTIES) #REF! #REF!

9 TOTAL SCHEDULE NO.7: Type Test Charges [Total of this Schedule is included in Schedule-1 above] 0.00 0.00

I) Bidder has indicated the following taxes and duties additionally applicable for their bid:

a) Excise Duty Rs. #REF!

b) CST /VAT Rs. #REF!

c) Entry Tax / Octroi Rs. #REF!

d) Others Rs. #REF!

II) Bidder has offered following discount(s)

III) With regard to Entry Tax, it may be mentioned that the substations covered under the subject pacakge falls in State of MP, where an entry tax @ 1% of Purchase Price is applicable. In view of the above, the taxes and duties inter-alia including entry tax applicable for the bids are calculated : Details of dicounts

a) Ex-Works Price of Direct Supplies (after discount, if any) Rs. 0 Gross LS #REF! #REF! #REF! Gross % #REF! #REF! #REF!

b) Excise Duty @ 10.3% of (a) above Rs. 0 #REF! #REF!

c) CST / VAT @ 2% of Ex-Works of Direct Supplies (a) + ED (b) above Rs. #REF! Sch-1 Direct LS #REF! #REF! #REF! Sch-1 Direct % #REF! #REF! #REF!

d) Others Rs. Sch-1 BO LS #REF! #REF! #REF! Sch-1 BO % #REF! #REF! #REF!

e) Purchase Price for Entry Tax (Total Ex-Works+F&I+ED+CST+Others) Rs. #REF! Sch-2 LS #REF! #REF! #REF! Sch-2 % #REF! #REF! #REF!

f) Entry Tax @ 1% of (e) above Rs. #REF! Sch-3 LS #REF! #REF! #REF! Sch-3 % #REF! #REF! #REF!

Sch-7 LS #REF! #REF! #REF! Sch-7 % #REF! #REF! #REF!

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Statement of Quoted / Corrected Prices Page Different Manner #REF!

Text for Discount #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

POWER GRID CORPORATION OF INDIA LTD.

Details of Measurement

Name Of Work : : Fabrication of 2-Nos Closed Store shed for Oil shed Drum/ hardware fittings at Bhadla-2 Substation

Schedule Items-CIVIL

Sr.No DSR-2023 Item No Dsecription of works Nos. Length (M) Breadth (M) Height/Depth (M) Quantity Unit

1 2.28 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil

Surface Area 2 16.5 16.5 545 sqm

2 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m 2.8.1 All kinds of soil.

3 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

IN footing-Excavated Earth 110

Deduction-Footing Qty(RCC) -16

Deduction-Column Qty(RCC) -6

Total Qty 87 cum

4 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Ramp Area 2 1 2 2 0.15 1.2

Total Qty 63 cum

5 4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Foundation:PCC 2 48 1.5 0.075 11 sqm

Column Shuttering 2 48 0.45 1.2 52

Ramp Area 2 2 2 0.15 1.2

Flooring Top Surface 2 16.5 0.1 3.3

Total Qty 69 sqm

6 5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Total Qty 22 cum

7 2.25 a) Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete

Surface Area 2 16.5 11.5 0.6 228 cum

8 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand)

Foundation: For closed the store(Below the Foundation) 2 2 16.5 0.6 1 40 cum

9 6.12 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in

6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand)

Above Foundation: For closed the store 2 2 28 2 224 sqm

10 13.1 12 mm cement plaster of mix :

13.1.2 1:6 (1 cement: 6 fine sand) 2 2 28 2 224 sqm

11 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix

13.7.2 1:4 (1 cement: 4 fine sand 2 1 16.5 11.5 380 sqm

12 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Flooring Top Surface 2 16.5 11.5 380 sqm

13 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Raft Steel(1500x1500): 1500/150=10+1=11 No in one side so, as per Drawing bothways, Total No of Steel- 11x2x2= 44 nos, Total Length of steel= 1500+200+200 = 1900m and wt of steel= 1.9x0.61x44 Nos = 50.996 Kg in one raft. 2 12 50.996 1223.904 KG

In Column: In Drawing showing 8Bar@16 Dia, Length-1.774x8x 1.58= 22.13 kg in one column 2 12 22.13 531.12

Striups: 8Dia@150C/C= 1200/150=8+1=9 Nos,Strips length- Column sixe 450x450 so Total Length= 1480+144=1624mm. Wt of one stirup in one column= 1.624x.39x9 = 5.70kg. 2 12 5.7 136.8

Total Qty 1892 kg

14 10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Foundation Bolts : 4 Nos 20 Dia bolt-Length-1000mm 12 4 48 Nos

weight of M20 bolt= 5.75kg for 1m Length 48 5.75 276

Total Qty 276 kg

15 12.5 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Iron Profile Sheet 2 15.6 10.6 330.72

Total Qty Says 802 SQM

16 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

1 Columns(175 ISMB) 2 10 4.56 91.2 19.6kg/m

Divider(175 ISMB) 2 4 10 80

Columns(ISMB 300) 2 2 4.56 9.12 46 kg/m

B Says Total Weight 419.52

3 Divider (90x90x8 mm) 2 4 11.25 90 10.8 kg /meter

Principal raft (90*90*8 mm) 2 4 10.64 85.12

Principal raft support (90*90*8 mm) 8 1 3.85 30.8

C Says Total Weight 2742.336

Total Weight 707.52

Purlin- Zed 2 37 5 370

D Total Qty 744.4

Total Weight (a+b+c+d) 11000 Kg

17 12.51.1 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

Total Qty 70.6 Meter

18 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Prline Zed 2 37 5 0.7 259.0

Base Plate Top & Bottom 2 2 12 0.3 14.4

Principal raft (90*90*8 mm) 2 4 10.64 0.3616 30.8

Principal raft support (90*90*8 mm) 8 7 0.3 0.3616 6.1

MS Door shutter 2 2 3 2 1.1 13.2

Total Qty 530 Sqm

19 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover 2 2 3 2 24 sqm

10.7 Providing and fixing ball bearing for rolling shutters 2 2 4 Nos

20 13.44 Finishing walls with water proofing cement paint of required shade :

13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) 2 1 28 2 112 Sqm

Sr.No DSR-2022 Electricals Item Unit Qty

Part A: Total Schedule Items As Per DSR-2022

1 1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting/LED/ compact fluorescent fitting of all types, comlete with all accessories and tube etc. directly on celing/ wall, including connection with 1.5 Sq. mm FRLS PVC insulated, copper conductor, sigle core cable and Each 4

2 19.1 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as req Each 4

3 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. Each 4

4 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed Medium duty PVC conduit , with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

1.10.1 Group A Point 4

1.10.2 Group B Point 4

5 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class medium class PVC conduitas required .

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 20

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 20

6 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

1.24.1 5/6 A switch Each 4

1.24.3 15/16 A switch Each 4

1.24.4 3 pin 5/6 A socket outlet Each 4

1.24.5 6 pin 15/16 A socket outlet Each 4

7 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Each 4

8 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required

1.27.2 3 Module Each 4

9 2.12 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required

10 2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without

2.3.1 6 way, Double door Each 1

POWER GRID CORPORATION OF INDIA LTD 765/400/220 KV BHADLA-2 SUB STATION

Name Of Work : : Fabrication of 2-Nos Closed Store shed for Oil Drums at Bhadla-2 Substation

S.No. DSR 2023 Item No Description Unit Quantity Rate Amount

Schedule Items-Civil

1 2.28 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil SQM 545 ₹ 0.00

2 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. CUM 110 ₹ 0.00

3 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. CUM 87 ₹ 0.00

4 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) CUM 63 ₹ 0.00

5 4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns SQM 69 ₹ 0.00

6 5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) CUM 22 ₹ 0.00

7 2.25 a) Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete CUM 228 ₹ 0.00

8 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: ₹ 0.00

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) CUM 67 ₹ 0.00

9 6.12 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in ₹ 0.00

6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand) SQM 224 ₹ 0.00

10 13.1 12 mm cement plaster of mix : ₹ 0.00

13.1.2 1:6 (1 cement: 6 fine sand) SQM 224 ₹ 0.00

11 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix ₹ 0.00

13.7.2 1:4 (1 cement: 4 fine sand SQM 380 ₹ 0.00

12 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. SQM 380 ₹ 0.00

13 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more KG 1892 ₹ 0.00

14 10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. KG 276 ₹ 0.00

15 12.5 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required SQM 802 ₹ 0.00

16 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete KG 11000 ₹ 0.00

17 12.51.1 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) Metre 71 ₹ 0.00

18 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work SQM 530 ₹ 0.00

19 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. ₹ 0.00

10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover SQM 24 ₹ 0.00

20 10.7 Providing and fixing ball bearing for rolling shutters Nos 4 ₹ 0.00

21 13.44 Finishing walls with water proofing cement paint of required shade : ₹ 0.00

13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) SQM 112 ₹ 0.00

Electricals Item ₹ 0.00

Part A: Total Schedule Items As Per DSR-2022 ₹ 0.00

1 1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting/LED/ compact fluorescent fitting of all types, comlete with all accessories and tube etc. directly on celing/ wall, including connection with 1.5 Sq. mm FRLS PVC insulated, copper conductor, sigle core cable and Each 4 ₹ 0.00

2 19.1 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as req Each 4 ₹ 0.00

3 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. Each 4 ₹ 0.00

4 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed Medium duty PVC conduit , with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required ₹ 0.00

1.10.1 Group A Point 4 ₹ 0.00

1.10.2 Group B Point 4 ₹ 0.00

5 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class medium class PVC conduitas required . ₹ 0.00

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 20 ₹ 0.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 20 ₹ 0.00

6 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required ₹ 0.00

1.24.1 5/6 A switch Each 4 ₹ 0.00

1.24.3 15/16 A switch Each 4 ₹ 0.00

1.24.4 3 pin 5/6 A socket outlet Each 4 ₹ 0.00

1.24.5 6 pin 15/16 A socket outlet Each 4 ₹ 0.00

7 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Each 4 ₹ 0.00

8 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required ₹ 0.00

1.27.2 3 Module Each 4 ₹ 0.00

9 2.12 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required ₹ 0.00

10 2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without ₹ 0.00

2.3.1 6 way, Double door Each 1 ₹ 0

: Attachments : General guidelines for filling up the Attachments Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3(JV), 3(QR), Attach QR, 4, 4(A), 4(B), 5, 5(A), 6, 9, 10, 11, 12, 13, 15, 16, 18. 19 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

5 Attachment 14 Integrity Pact: To be submitted as per ITB Clause No. 9.3(o) and as per remarks in the Attach 14.

6 Attachment 18 Safety Pact: To be submitted as per ITB Clause No. 9.3(s) and as per remarks in the Attach 18.

7 Attachment 20: Declaration of Key Managerial Person and Power of Attorney holder: Format is annexed Seperetely herewith this Volume

8 Attachment 21: Affidavit (submission of Hard Copy in ‘Original’) signed and stamped with company seal for correctness of all the information/details/data/ documentary evidences

9 Attachment 22: Declaration by the bidder regarding events encountered pursuant to ITB Clause 2.1: Format is annexed Seperetely herewith this Volume

10 Attachment 23: Certification by the Bidder per order no. F.No.6/18/ 2019-PPD dated 23/07/2020 issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India (DoE Order) in line with ITB 2.1: Format is annexed Seperetely herewith this Volume

11 Attachment 24: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII Order and MoP Order, if applicable: Format is annexed Seperetely herewith this Volume

11 Attachment 25: Certification by the Bidder per order no. F.No.6/18/ 2019-PPD dated 23/07/2020 issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India (DoE Order) in line with ITB 2.1: Format is annexed Seperetely herewith this Volume

12 Attachment-25: Bid Securing Declaration to be submitted by the Bidder.

Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Sole Bidder 1

JV (Joint Venture) 2 or More

Enter following details of the bidder

Specify type of Bidder SOLE BIDDER

Name of Sole Bidder

Address of Sole Bidder

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Attachment-3(QR)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Qualifying Requirement Data)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

As per Annexure – A (BDS) – QR

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Attachment-QR

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

Qualifying Requirement Data

Bidder’s Name and Address (Sole Bidder): To:

Contract & Material Department

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region Transmission System - I

SCO BAY 5-10, Sector-16

Faridabad-121002, Haryana

Dear Ladies and/or Gentlemen,

In support of the additional information required as per ITB clause 9.3(c) of the Bidding Documents, we furnish herewith our details/documents etc., alongwith other information, as follows:

We are furnishing the following details/document in support of qualifying requirement for the subject package(s).

Qualification of bidder will be based on meeting the minimum pass/fail criteria specified below regarding the Bidder’s technical experience and financial position as demonstrated by the Bidder’s responses in the corresponding Bid Schedules. Technical experience and financial resources of any proposed subcontractor(s) shall not be taken into account in determining the Bidder’s compliance with the qualifying criteria. The bid can be submitted by an individual/ joint venture firm. At any stage of evaluation if any shortcoming/ discrepancy/ deficiency is observed in the documents/ details submitted by the bidder and or it is observed that the bidder is not meeting the stipulated QR, respective bid shall be summarily rejected. The owner may assess the capacity and capability of the bidder, to successfully execute the scope of work covered under the package within stipulated completion period. This assessment shall inter-alia include (i) Document verification; (ii) Bidder’s works visit (if required), (iii) Details of works executed, works in hand, anticipated in future & the balance capacity for the present scope of work; (iv) Details of plants and machinery, manpower and financial resources; (v) Details of quality system in place; (vi) past experience and performance; (vii) customers feedback; (viii) Banker’s feedback; etc.

0.0 Technical Experience:

1.1.1 The bidder should have successfully executed similar works (i.e civil works like PCC/RCC/Painting and other building works including services etc.) for Govt or Semi Govt. or reputed private Sector Organization within the last 7 years from the originally scheduled date of bid opening, as per following i. One single work/ project of a value of not less than Rs. 70.08 Lakhs (80% of estimated cost) or ii. Two works/ projects, each of a value of not less than Rs. 43.80 Lakhs (50% of estimated cost) or iii. Three works/ projects, each of a value of not less than Rs. 35.04 Lakhs (40% of estimated cost)

1 Name of the work

2 Name of the Client

3 Address of Client

4 Contact Details of Client Authorised Dealer/Sub dealer

5 Work Order Details Authorised Representative

Date Certificate of Authorized Dealership Submitted

Authorization of Manufacturer Submitted

6 Copy of Work order uploaded

Please upload Work Order Name of Manufacturer

7 Date of Completion of Work No

8 Completed amount for the work (Rs. Lakh) OBD 2016-01-05T00:00:00Z

7 Document submitted as Proof of Completion

Completion Cerificate No

8 Details of Document for Proof of Completion Any other document, authenticated by the client

Reference No. MAAT 127

9 Proof of Completion Uploaded Two Work

Please upload Proof of Completion

Work 2 (if any)

1 Name of the work

2 Name of the Client

3 Address of Client

4 Contact Details of Client

5 Work Order Details

6 Copy of Work order uploaded

Please upload Work Order

7 Date of Completion of Work

8 Completed amount for the work (Rs. Lakh)

7 Document submitted as Proof of Completion

8 Details of Document for Proof of Completion

9 Proof of Completion Uploaded

Please upload Proof of Completion

Work 3 (if any)

1 Name of the work

2 Name of the Client

3 Address of Client

4 Contact Details of Client Authorised Dealer/Sub dealer

5 Work Order Details Authorised Representative

Date Certificate of Authorized Dealership Submitted

Authorization of Manufacturer Submitted

6 Copy of Work order uploaded

Please upload Work Order Name of Manufacturer

7 Date of Completion of Work No

8 Completed amount for the work (Rs. Lakh) OBD 2016-01-05T00:00:00Z

7 Document submitted as Proof of Completion

Completion Cerificate No

8 Details of Document for Proof of Completion Any other document, authenticated by the client

Reference No. MAAT 127

9 Proof of Completion Uploaded Two Work

Please upload Proof of Completion

0.9 Financial position

Minimum Average Annual Turnover (MAAT)* of the bidder should be Rs. 131.41 Lakhs for best three financial years out of last five financial years commencing from Financial Year 2017-18. *Note: - Annual Gross revenue from operations/ gross operating income as incorporated in the profit & loss account excluding other income.

Performance Report from Client

Acceptance of Final Bill by Client

Sr. No. Financial Year Turnover (in Rs. Lakh) Copy of Balance Sheet & P/L Account Uploaded Certificate from CA

a 2017-18 Any Other (Please Specify)

Average Turnover for Best Three Years

The bidder shall furnish following documents/details with its bid a) The bidder shall submit documents in support of meeting the technical experience mentioned at Para 1.1 above in the form of LOA/ Work order & completion certificate/payment certificate or any other document evidencing the same. b) The bidder shall submit audited / certified copies of Balance Sheet and Profit and Loss account in support of meeting the financial position as mentioned at Para 1.2 . Note-I : In the event the bidder is not able to furnish the information of its own (i.e., separate), being a subsidiary company and its accounts are being consolidated with its group/ holding/ parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/ holding/ parent company) duly certified by any one of the authority [(i) Statutory Auditor of the bidder or (ii) Company Secretary of the bidder certifying that such information / documents are based on the audited accounts as the case may be). Note II: Similarly, if the bidder happens to be group/ holding/ parent company, the bidder should submit the above documents/ information of its own (i.e., exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/ documents are based on the audited accounts as the case may be.

Relaxation for MSEs/ STARTUPS MSEs^/ START-UPs^^ meeting the necessary requirements shall also be considered qualified if they meet 80% (Eighty percent) of the requirements of Minimum Average Annual financial turnover (MAAT ) for the best three financial years out of the last five financial years as above. ^MSEs as defined in bidding documents. ^^START-Ups as defined by DIPP, applicable as on the originally scheduled date of bid

1 Copy of PAN Card Uploaded

Please upload Copy of PAN Card

1.1 PAN Card Number

2 Status of the Bidder

3 MOA & AOA/ Certificate of Incorporation Uploaded

Please upload Copy of Relevent Document

Date : Printed Name :

Place : Designation :

Private Limited Company

Public Limited Company

Affidavit of Proprietorship Uploaded

Parnership Deed Uploaded

MOA & AOA/ Certificate of Incorporation Uploaded

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Attachment-4

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Form of Certificate of Origin and Eligibility)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

We hereby certify that equipment and materials to be supplied are produced in [Name of Countries], eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]

We hereby certify that our company is incorporated and registered in [Name of Countries], eligible source country. [Name of Countries] [Name of Countries] [Name of Countries],

country. country. [Name of Countries], [Name of Countries],

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)

Attachment-4(A)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

S.No. For Equipment Item Description Unit Quantity

Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)

Attachment-4(B)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Attachment-5

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Bought-out & Sub-contracted Items)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of furnishing and installation of the subject Package:

Sl. No. Item Description Quantity proposed to be bought/ sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

We hereby declare that, we would not subcontract the erection portion of the contract (if any) without the prior approval of Employer.

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Attachment-5(A)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

1. We hereby furnish the details of the items, components, raw material, services which we propose to buy / avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the subject package.

Sl. No. Item Description Quantity Proposed to be bought / sub-contracted Name of Micro and Small Enterprises (MSEs)

Name Category (Micro or Small)

2. The above is a list of items we propose to procure from MSEs. However, based on the situations during the execution of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEs carried out by us, as per the format provided at Section VI, Forms & Procedures, Volume-Iof Bidding Documents, shall be submitted along with the bills for payment against supplies made/works done during execution of contract.

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Alternative, Deviations and Exceptions to the Provisions)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Annexure I to

(Alternative, Deviations and Exceptions to the Provisions)

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Attachment-9

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Work Completion Schedule)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject Package i.e., Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract

1 Detailed Engineering and drawing submission Shall be as per Delivery Schedule (Completion Period) given in SCC. Hence Not Required to be Filled here.

a) commencement

2 Procurement of equipment/ components & assembly

a) commencement

a) commencement

4 Manufacturing

a) commencement

5 Shipments & Delivery

a) commencement

6 Establishment of site office

7 Installation at Site

a) commencement

8 Testing & Pre-commissioning

a) commencement

9 Trial Operation

a) commencement

Date : Printed Name :

Place : Designation :

Note : Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Attachment-11

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

We declare that we are aware of and have gone through the "Code of Business Conduct and Ethics for Senior Management Personnel" and "Code of Business Conduct and Ethics for Board Members" of POWERGRID (hereinafter referred to as the "Code of Conduct"). We further understand that as per the "Code of Conduct", Senior Management Personnel including Board Members, who have retired / resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred "Code of Conduct", within 1 year from the date of cessation of service / directorship unless approved by the Competent Authority.

Accordingly, We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

*In case the date of joining in the bidder's organization of such ex-employee is within 1 year from the date of retirement / resignation from POWERGRID, No Objection Certificate / approval from the Competent Authority must be furnished alongwith the bid or subsequent through clarification pursuant to ITB Clause 21.

In case of non-submission of No Objection Certificate / approval of the Competent Authority, as required, We understand that POWERGRID shall deal with such cases as per its Policy and Procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard.

We further declare that any misrepresentation or submission of false / forged documenmts / information in this regard shall be dealt with as per the provisions of the Integrity Pact and / or the Bidding Documents and / or POWERGRID's policy and procedure.

Date : Printed Name :

Place : Designation :

1. "Code of Business Conduct and Ethics for Senior Management Personnel" and "Code of Business Conduct and Ethics for Board Members" are available on POWERGRID's website http://www.powergridindia.com.

2. The information in similar format should be furnished for each partner of joint venture in case of joint venture bid.

3. In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated '-' against the same, it shall be deemed that they have not employed any such person in their organization.

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Price Adjustment Data)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

We hereby confirm that the prices of Services offered by us will remain FIXED & FIRM during the performance of the contract and will not subject to any variation on any account.

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Declaration regarding Social Accountability)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

Attachment 14 Integrity Pact: To be submitted as per ITB Clause No. 9.3(o) and as per remarks in the Attach 14.

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

I We have read the provisions in the Bidding Documents regarding furnishing the option for advance payment. Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents, we hereby confirm to opt the following:

Interest Bearing Initial Advance

Supply Portion: NOT APPLICABLE No

Services Portion: NOT APPLICABLE No

II We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1 Name of the Supplier/ Contractor in whose favour payment is to be made

2 Address with PIN Code and State

Registered Office:

Correspondence Address:

3. (a) Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

3. (b) Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment/notification/order [Indicate Yes / No]

Note: Documentary evidence is to be attached. Please refer remarks at the end of the attachment.

3. (c) If 3(b) is 'Yes' please mention whether you are (Proprietary MSE/ Partnership MSE/ Private Limited Company) owned by SC/ST entrepreneurs

3. (d) Are you a MSE owned by women in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro and Small Enterprises (MSEs) Amendment Order 2018 including subsequent amendment/notification/order [Indicate Yes / No]

Note: Documentary evidence is to be attached.

4 Permanent Account (PAN) No.

5 GSTIN Numbers

I. GSTIN in the Sates/UT from where the supply of goods take place

Name of the States/UT GSTIN number

II. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)

Name of the States/UT GSTIN number

9 PF Registration No. of the Company

10 PF Regional Office covered (with Address)

11 Name of Contact Person

12 Contact Details

13 Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account: Saving Account

14 9 digit MICR code printed at bottom in middle, next to cheque no.

15 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

Remarks: The definition of MSEs owned by SC/ST is as given under:

a. In case of proprietary MSE, proprietor(s) shall be SC/ST.

b. In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.

c. In case of Private Limited Companies, at least 51% share shall be held by SC/ST promoters.

Documentary Evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Attachment-16

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Additional Information)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

In support of the additional information required as per ITB Sub-Clause 9.3 (q) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

0.0 The Bidder shall furnish

A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(q)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Bidder (Sole Bidder)

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

(iii) As per para BDS/ITB clause 9.3 q, Bidder shall furnish the details of their Provident Fund Code Number

Sl. No. Name of Bidders/JV Partners Provident Fund Code Number Details

0.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(q)(ii)]

2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3 Details regarding previous transgressions of Integrity Pact

The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country.

3.1 Details regarding previous transgressions of Integrity Pact that occurred in the last 10 years

Year Name of client Details of Transgression of Integrity Pact by the bidder

0.0 OTHER INFORMATION

4.1 Current Contract Commitments of works in progress

Bidders (individual firms or each partners of JV) should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

4.2 Financial Data:

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

Total Liability

Current Liability

Profit before taxes

Profit after taxes

4.3 Provident Fund Code Number of the Bidder:

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Attachment-17

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Declaration for tax exemptions, reductions, allowances or benefits)

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

1 We confirm that we are solely responsible for obtaining following tax exemptions, reductions, allowances or benefits in respect of supplies under the subject package, in case of award. We further confirm that we have considered the same in our bid thereby passing on the benefit to POWERGRID while quoting our prices. In case of our failure to receive such benefits, partly or fully, for any reason whatsoever, the Employer will not compensate us.

2 We are furnishing the following information required by the Employer for issue of requisite certificate if and as permitted in terms of the applicable Govt. of India policies/procedures (in case of award):

Applicable Act, Notification No. and Clause Ref. No. Sl. No. Description of item on which applicable Country of origin Remarks, if any

(The requirements listed above are as per current Notification of Govt. of India indicated above. These may be modified, if necessary, in terms of the Notifications.)

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Attachment-17

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contracts & Materials dept.

Name : …… ……. …….. …… ……. …….. Power Grid Corporation of India Ltd.,

Address : …… ……. …….. …… ……. …….. Northern Region–I, Regional Headquarter,

…… ……. …….. …… ……. …….. SCO Bay No. 5 to 10, Sector 16A,

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : Printed Name : Printed Name :

Place : Designation : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Attachment-17

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : Printed Name : Printed Name :

Place : Designation : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

Attachment 18 Safety Pact: To be submitted as per ITB Clause No. 9.3(s) and as per remarks in the Attach 18.

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)

Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation

Bidder’s Name and Address (Sole Bidder): To:

Contracts & Materials dept.

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region–I, Regional Headquarter,

SCO Bay No. 5 to 10, Sector 16A,

Faridabad-121002, Haryana

Further, we hereby confirm that except as mentioned in the Attachment – 6 (Alternative, Deviations and Exceptions to the Provisions) hereof forming part of our First Envelope :

Date : Printed Name :

Place : Designation :

Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193) Bid Form 1st Envelope 1 one 1 st 1 January

2 two 2 nd 2 February

BID FORM (First Envelope) 3 three 3 rd 3 March

4 four 4 th 4 April

Bid Proposal Ref. No.: 5 five 5 th 5 May

Date: 6 six 6 th 6 June

7 seven 7 th 7 July

To: 8 eight 8 th 8 August

Contracts & Materials dept. 9 nine 9 th 9 September

Power Grid Corporation of India Ltd., 10 ten 10 th 10 October

Northern Region–I, Regional Headquarter, 11 eleven 11 th 11 November

SCO Bay No. 5 to 10, Sector 16A, 12 twelve 12 th 12 December

Faridabad-121002, Haryana 13 thirteen 13 th

14 fourteen 14 th

Name of Contract : Fabrication of 2-Nos Closed Store shed for Oil Drum at Bhadla-2 Substation 15 fifteen 15 th

Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th

0.0 Having examined the Bidding Documents, including Amendment Nos. ...[Enter the Amendment]… dated …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in single envelope. ...[Enter the Amendment]… …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in single envelope. 17 seventeen 17 th

0.0 We meet the eligibility requirements and have no conflict of interest in accordance with ITB Clause 2.

0.0 Attachments to the Bid Form Bank Draft 18 eighteen 18 th

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th

(a) Attachment 1: Bid Security Bank Guarantee INR Banks certified Cheque Zero 20 twenty 20 th

(b) Attachment 2 : A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Please note that if bid validity is less than 07 (seven) months, your bid may be rejected Bank Guarantee (0) 21 st

(c) Attachment 3 (QR) & Attach QR: The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3 (c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents Attachment-3(QR). FDR 22 th

SOLE BIDDER CDR/TDR Applicable 23 th

(d) Attachment 4, 4A & 4B : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. A list of Special Tools & Tackles to be used by us for erection, testing & Commissioning and to be handed over to Employer, the cost of which is included is our Bid Price, is also enclosed as per your format as Attachment 4A. A list of Special Tools & Tackles to be brought by the contractor for erection, testing & Commissioning and to be taken back after completion of work, whose cost in not included in our bid price, is enclosed as per your format as Attachment 4B. 0 Not Applicable 24 th

(e) Attachment 5 : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 25 th

(f) Attachment 5(A) : The details of the items, components, raw materials, services which we propose to buy / avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the subject package in case of award, giving details of the name and category of the proposed Micro and Small Enterprises (MSEs).

(g) Attachment 6 : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 26 th

(h) Attachment 7 : NOT APPLICABLE The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. (Not Applicable) 27 th

(i) Attachment 8 : NOT APPLICABLE Manufacturer’s Authorisation Forms. 28 th

(j) Attachment 9 : Work Completion Schedule. 29 th

(k) Attachment 10 : Guarantee Declaration. 30 th

(l) Attachment 11 : Information regarding ex-employees of Employer in our firm. 31 st

(m) Attachment 12 : Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.

(n) Attachment 13 : Declaration regarding Social Accountability.

(o) Attachment 14 : Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.

(p) Attachment 15 : Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

(q) Attachment 16 : Additional Information.

(r) Attachment 17 : Declaration for tax exemptions, reductions, allowances or benefits

(s) Attachment 18 : Safety Pact

(t) Attachment 19 : Declaration.

(u) Attachment 20 : Declaration of Key Managerial Person jointly with Power of Attorney Holder

(v) Attachment 21 : Affidavit (submission of Hard Copy in ‘Original’) signed and stamped with company seal by a full time Director/ CEO/ Chairman-cum-Managing Director

(w) Attachment 22: Declaration by the Bidder regarding events encountered pursuant to ITB Clause 2.1

(y) Attachment 24: Certification by the Bidder per order no. F.No.6/18/ 2019-PPD dated 23/07/2020 issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India (DoE Order) in line with ITB 2.1

(x) Attachment 23: Certification by the Bidder per order no. F.No.6/18/ 2019-PPD dated 23/07/2020 issued by Public Procurement Division

(y) Attachment 24: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII Order and MoP Order, if applicable

0.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.

0.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

0.9 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

0.9 We also understand that, in case of award on us, you shall pay directly, if so required /reimburse to us octroi/entry tax as applicable for destination site/state on all items of supply including bought-out finished items, which shall be dispatched directly from the sub-vendor’s works to the Employer’s site (sale-in-transit). Further, Service Tax, if applicable, for the services to be rendered by us, the same is included in our bid price in Second Envelope.

0.0 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

0.0 We confirm that no Sales Tax/VAT in any form shall be payable by you for the bought out items which shall be despatched directly by us under the First Contract (as referred in para 5.1 below) [or Letter of Award, if 5.1 Not applicable] to the project site. However, you will issue requisite Sales Tax declaration/Vatable forms in respect of such bought out items, on production of documentary evidence of registration with the concerned Sales Tax Authorities.

0.0 Construction of the Contract

0.9 We declare that we have studied Clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us two separate Contracts viz ‘First Contract’ for ex-works supply of all equipment and materials including mandatory spares and ‘Second Contract’ for providing all the services i.e. inland transportation for delivery at site, insurance, unloading, storage, handling at site, installation, testing and commissioning including Trial operation in respect of all the equipment supplied under the ‘First Contract’ and other services specified in the Contract Documents. We declare that the award of two contracts, will not, in any way, dilute our responsibility for successful operation of plant/equipment and fulfillment of all obligations as per Bidding Documents and that both the Contracts will have a cross-fall breach clause i.e. a breach in one Contract will automatically be classified as a breach of the other contract which will confer on you the right to terminate the other contract at our risk and cost.

0.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:

(a) ITB 13 Bid Security

(b) GCC 2.14 Governing Law

(c) GCC 55.0 Terms of Payment

(d) GCC 8.3 Performance Security

(e) GCC 6.0 Taxes and Duties

(f) GCC 38.0 Liquidated Damages for Delay by Contractor

(g) GCC 39.0 Guarantee

(h) GCC 40.0 Defect Liability

(i) GCC 20.5 Patents and Royalties

(j) GCC 61.0 Limitation of Liability

(k) GCC 57.0 Settlement of Disputes

(l) GCC 59.0 Arbitration

Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.

0.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award/Letter of Award/Work Order to us, and to achieve the completion within the time stated in the Bidding Documents.

0.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

0.0 We agree to abide by this bid for a period of 180 (One Hundred Eighty) days from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period.

0.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

0.0 We understand that you are not bound to accept the lowest or any bid you may receive.

0.0 Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution, if we are awarded the contract, are listed below:-

Name and address of agent Amount and Currency Purpose of Commission or gratuity

(If none, state “none”)

0.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions.

0.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : Printed Name :

Place : Designation :

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 (Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)) Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 (Specification No.:NR1/NT/W-CIVIL/DOM/I00/26/03989 (Rfx: 5002005193)) Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Checklist for Bid Submission

1 Soft copy of First Envelope Bid Form Duly Filled Excel Sheet of Attachment and Bid Form to be uploaded in Soft Copy along with Bid. To be submitted in Soft Copy.

2 Power of Attorney (POA) Duly notarized (on Stamp Paper of requisite value), indicating that the person(s) signing the bid has(ve) the authority to sign the bid. In case of bid submitted by a Joint Venture of two or more firms as partners, if allowed as per stipulated Qualification Requirements in Annexure-A (BDS), bidder shall submit. Power of Attorney for Joint Venture and Joint Venture Agreement as per given format Submission of Hard copy in ‘Original’and uploading of Scanned Copy

3 MSE Status Certificate (if applicable) Udyam Registration Certificate and certificate for Registration under category of Micro/Small enterpises. Submission of Hard copy and uploading of Scanned Copy

4 Bid Security The bid security shall, at the bidder’s option, be in the form of a crossed bank draft in favour of POWERGRID or a bank guarantee from a reputed bank selected by the bidder. Alternatively, same can be submitted as online payment through POWERGRID ONLINE PAYMENT UTILITY- https://epay.powergrid.in, a link of which is provided on the POWERGRID website www.powergridindia.com. The copy of ‘Online Payment Acknowledgement – Suppliers’ generated subsequent to the payment shall be submitted along with hard copy part of the bid. The format of the bank guarantee shall be in accordance with the form of bid security included in the Bidding Documents. Bid security shall be valid upto 250 days from the date of Bid Opening. The Bid Security shall be in favour of Power Grid Corporation of India Limited payable at New Delhi. Submission of Hard copy and uploading of Scanned Copy

5 Bidding Document Fee Bid document cost for amount as specified in BDS- Hard copy of document related to online payment of bid document cost as indicated in BDS or Exemption certificate to be submitted along with hard copy part of bid. Copy of the payment proof may be uploaded online on the portal. Submission of Hard copy and uploading of Scanned Copy

6 Attachment-8: Manufacturers Authorization Form Not applicable

7 Attachment-14: Integrity Pact To be submitted on a non-judicial stamp paper of Rs. 100/-. (in two originals, Signed on each page by Power of Attorney Holder and duly witnessed) Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

8 Attachment-18: Safety Pact To be submitted on a non-judicial stamp paper of Rs. 100/-. (in two originals, Signed on each page by Power of Attorney Holder and duly witnessed) Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

9 Attachment 20: Declaration of Key Managerial Person jointly with Power of Attorney holder Signed by CEO/Managing Director/Company Secretary/ Director/ CFO/ any of the partner in case of partnership firm/ any other officer entrusted with substantial powers of the management of the affairs of the company/firm and POA Holder To be submitted in Soft Copy.

10 Attachment-21: Affidavit regarding correctness of Information To be submitted on Firm/Company's Letterhead. Signed and stamped with company seal by a full time Director/ CEO/ Chairman-cum-Managing Director and attested/ notarized by a Magistrate/ Notary for correctness of all the information/details/data/ documentary evidences etc. as submitted by the bidder are correct. To be submitted in Soft Copy.

11 Attachment-22: Declaration by the bidder regarding events encountered pursuant to ITB Clause 2.1. (In case of a Joint Venture bid, the declaration shall be given by all partners of the Joint Venture) On Firm/Company's Letterhead To be submitted in Soft Copy.

12 Attachment-23: Certification by the Bidder as per order no. F.No.6/18/2019-PPD dated 23/07/2020 issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India (DoE Order) in line with ITB 2.1 (In case of a Joint Venture bid, the declaration shall be given by all partners of the Joint Venture) On Firm/Company's Letterhead To be submitted in Soft Copy.

13 Attachment 24: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII Order and MoP Order (In case of a Joint Venture bid, the declaration shall be given by all partners of the Joint Venture) To be submitted on a non-judicial stamp paper of Rs. 100/-. Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

14 Attachment 25: Compliance for E-REVERSE AUCTION On Firm/Company's Letterhead To be submitted in Soft Copy.

15 Documents for Qualifying Requirement (QR) In support of meeting the qualifying requirements (QR) such as copy of letter of award/ work order, completion certificate, copy of audited balance sheet for five years etc., shall be uploaded by the bidder along on the portal as part of technical bid To be submitted in Soft Copy.

NOTE: This checklist is not exhaustive and issued for the purpose of reference Only. In case of any ambiguity, the provisions of Bidding Documents shall prevail.