Renovation work of library at Ground floor and first floor and Horticulture works in the institute building at NIPCCD Hauz Khas New Delhi

GRAND TOTAL 1,29,83,430.00

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Dismantling tile work in floors and roofs laid in cement

mortar including stacking material within 50 metres lead.

15.23.1 For thickness of tiles above 10 mm and up to 25 mm SQM 200.00 73.40 14,680.00

Dismantling doors, windows and clerestory windows (steel

1.2 15.12 or wood) shutter including chowkhats, architrave, holdfasts

etc. complete and stacking within 50 metres lead:

15.12.1 Of area 3 sq. metres and below EACH 65.00 367.30 23,874.50

Dismantling wooden/aluminium / Gypsum partitions,/

doors, windows, fixed glazing and false ceiling including

1.3 15.57 disposal of unserviceable surplus material and stacking of SQM 45.00 56.35 2,535.75

serviceable material with in 50 meters lead as directed by

Engineer-in-Charge.

Carriage of material by mechanical transport including

loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per

direction of Engineer-in-charge.

Dismantling stone slab flooring laid in cement mortar

15.25 including stacking of serviceable material and disposal of CUM 10.00 266.45 2,664.50

unserviceable material within 50 metres lead

TOTAL OF DISMANTLING 91,330.75

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/ MR 2023 DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

1 FLOORING WORKS

Providing and laying vitrified floor and wall tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and conforming

to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement

1.01 11.41A mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600X1200 mm

Marble stone flooring with 18 mm thick marble stone, as per sample of marble

approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar

1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including

rubbing and polishing complete with :

11.23.5 Udaipur green marble 4.75 sqm 2428.6 11,535.85

TOTAL FLOORING WORKS 8,31,788.65 -

2 FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle

cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm

long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50

mm of required length with nuts & bolts of required size and other end of angle hanger

fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to

centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

2.01 12.45 including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm

and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including

fixing of gypsum board to ceiling section and perimeter channel with the help of dry

wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3 layers covering upto

150 mm on both sides of joint and two coats of primer suitable for board, all as per

manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with

Digitally signed by AMIT

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011

12.45.1 (Board with BIS certification marks) 130.00 Sqm 1355.00 1,76,150.00

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner

with suitably spaced joints to get required length and of size 24x38 mm made from 0.30

mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size

24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between

main "T" at 600 mm center to center to form a grid of 1200x600 mm andsecondary cross

"T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be

interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall

angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid

including, required cutting/making, opening for services like diffusers, grills, light fittings,

12.52 fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI

slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm

long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size

85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed

width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete

for all heights as per specifications, drawings and as directed by Engineer-in-charge.

12.5mm thick Gypsum board tile made of of size 595x595 mm

TOTAL FALSE CEILING WORKS 4,81,750.00 -

3 WALL FINISHES WORKS

Supply and installation of Aluminium Framed Glass Partition for Access and Cabin

System for minimal frame, room dividing solutions.Single glazed mullion free

demountable glass partition using Toughened/ Laminated glass in proprietary natural

anodised/Black aluminium sections ALT 50 of size 50mm x 30mm with Concealed

sealing (No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party

test certificate. The profile will have Carpert Groove at the Bottom on both sides for

accomodating max. 8mm carpets. THe Glass to be fixed with help of Proprietary

Stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim

junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction

profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to

provide clutter free view at both side of section. The Glass to be Offset mounted

towards outer edge leading to minimum aluminium frame on one side. Optional Profile

Bottom Seal pair for additional accoustic. Glass thickness-10 (LSG).shall be included in

Digitally signed by AMIT

Providing wood work in frames of doors, windows, clerestory windows and other frames,

wrought framed and fixed in position with hold fast lugs or with dash fasteners of

3.02 9.1 required dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 0.17 cu m 142949.70 24,301.45

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed

3.03 8.27 with rawl plug and drilling necessary holes for rawl plug etc. including priming coat

8.27.1 Kiln seasoned and chemically treated hollock wood 0.03 cu m 187277.65 5,618.33

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

3.04 9.53 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm 12.00 Each 228.25 2,739.00

Providing and Fixing FHHS 3100 (EN 1154) - Double cylinder Floor Spring with Top-Bottom

Patch,pivot and Bottom Patch Lock Maximum door weight 100 Kg. Maximum door

width 1000 mm.Closing speed : 120°,Final closing speed : 15-0°. Hold Open (standard):

90° hold open.Suitable for 10-12 mm glass

Weight of floor spring approx : 6kg

5 Years Warranty against manufacturing defect with 5,00,000 cycles Tested approved

make and model all complete as per the direction of Engineer-in-charge.

Providing and fixing 12mm thick frameless toughened glass door shutter of approved

brand and manufacture, including providing and fixing top & bottom pivot & double

acting hydraulic floor spring type fixing arrangement and making necessary holes etc.

3.06 21.18 for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door 34.00 Sqm 5325.90 1,81,080.60

handle, lock and stopper etc.to be paid separately).

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-

effect film to reproduce Sand-blasting effect on glass with customised designs, thickness

of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum tensile

strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of

installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS

warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed by

3.07 MR 3M India Limited Architectural Market Department. Contractors payment wouldn't be 18.00 Sqm 1980.00 35,640.00

released until & unless he/she produces orginal warranty certificate from the

Digitally signed by AMIT

Providing & supplying of Window Blinds as per the approved sample in required shade

and style consisting, of Roller Blinds comprising of optima screen Fabric comprising of

22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm,

Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-

5659-2 .The tear resistance should be complying to ISO4674 & breaking resistance – ISO

5081. The DRIVE UNIT shall be of clutch for quick,easy and safe installation,moulded

plastic with steel spring support and inserted into the tube end. It shall be driven by a

ball chain pulley with ball chain and can be positioned at right side or left hand side of

the Shade. The Shade when lowering or raising, shall be automatically locked in position

upon release of the ball chain by means of a built in friction lock.Universal clutch for left

and right hand operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be molded of

plastic witha steel location pin. The plug shall be inserted into the tube end. (Opposite

to the Drive Unit) for ease of installation. TheSUPPORT BRACKETS shall be of coated steel

& provided with covers and used in right hand or left hand positions differentiated by

MR the acceptance of the of the rectangular drive unit support or the round idler plug 32.10 Sqm 2806.00 90,072.60

pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The

Bracket should be protruding outside maximum of80mm.The ROLLER TUBE shall be of

extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shall

incorporate a key way integral with the tube to accommodate the spline. The BOTTOM

RAIL shall be a Flat Bottom made up of powder coated steel. The BALLCHAIN shall be

2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm

3.08 pitch to form an endless ballchain.It is used for raising or lowering action of the shades.

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high

and in line with external glazing as per details of Architect. Rate to include finishing

3.09 MR exposed surfaces of the Pelmet with enamel paint of approved shade or 1mm 58.00 RM 800.00 46,400.00

PLYWOOD PARTITIONING- Providing and fixing full height partly double skin wooden

partitions made out of Frame work to be 50X50X1.60mm

thick aluminum section weight not less than 0.836 kg/rmt with

maximum distance of 450mm c/c both ways(Horizontal/Vertical)

or as directed. Floor or slab with 65 to 75 mm long screw. The

3.1 MR vertical GI member shall be placed at 450 to 500 mm center to 6.00 SQM 3000.00 18,000.00

center and horizontal members to be placed at 600 mm c/c or

as directed by the Engineer as per site conditions with

necessary grooves and cuts etc. including anti-termite treatment

to all wooden members.

INSULATION- Providing and fixing thermal insulation with Resin Bonded Fibre glass wool

conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin

Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by

criss crossing GI wire etc. complete as per directions of Engineer-in-Charge

Digitally signed by AMIT

PLYWOOD PANELLING- Plywood panelling using 12mm fire retardant Ply fixed on both

3.12 MR side on Aluminium Frame 50mm x 25mm as per approved sample and architectural 22.00 SQM 2250.00 49,500.00

drawings. Aluminium frame to be fixed to walls, floor and RCC Ceiling using fastners.

LAMINATE CLADDING- P/F 1 mm thick laminate including 4 mm thick MDF as per design

for passage wall plywood panelling complete with filling of grooves with matching or

3.13 MR contrast color, as per the direction of the engineer in charge. 22 SQM 1590.00 34,980.00

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

6.13 designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course

3.15 6.15 of half brick masonry. 45.00 Sqm 104.80 4,716.00

13.4 12 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface

to prepare the surface even and smooth complete.

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and

13.83 manufacture, including applying additional coats wherever required to achieve even

shade and colour.

13.85Applying priming coats with primer of approved brand and manufacture,

having low VOC (Volatile Organic Compound ) content

With water thinnable cement primer on wall surface having

13.85.3 VOC content less than 50 grams/litre 630.00 Sqm 73.95 46,588.50

4.00 UPVC WINDOWS

Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc

alloy (zamak) powder coated handle on every panel along with multi-point locking

system, adjustable nylon rollers with SS 304 body

Digitally signed by AMIT

Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x

(74mm & above). (Height upto 2.5 metr

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height

5.01 MR vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm 12.00 Sqm 4200 50,400.00

dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304

containing 7.5% nickle (Interior Grade) Brushed /Mat finish, complete as per direction of

the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

A.1 1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed

medium class PVC conduit, with modular switch, modular plate, suitable GI box

and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc as required.

A.2 1.55 Wiring for group controlled (looped) light point/ fan point/call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed PVC conduit, and earthing the

point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as

A.3 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper Metre 270 334.00 90,180.00

conductor single core cable in surface/ recessed medium class PVC conduit alongwith

1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop

earthing as required.

A.4 1.24 Supplying and fixing following modular switch/ socket on the existing modular

plate & switch box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 38 122.00 4,636.00

1.24.5 6 pin 15/16 amp socket outlet Each 25 197.00 4,925.00

A.5 1.26 Supplying and fixing modular blanking plate on the existing modular plate & Each 30 40.00 1,200.00

switch box excluding modular plate as required.

A.6 1.27 Supplying and fixing following size/module, GI box along with Modular base & cover

plate on existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

B.1 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following

sizes of FR PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 70 334.00 23,380.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 120 439.00 52,680.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 90 1005.00 90,450.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre

7.1 Supply, fabrication and fixing of steel frame work in position for cable

tray/Panels fabricated out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50

channels, flats etc.complete with providing of Anchor fastners and all necessary

hardwares as required for fixing, including cutting, bending, welding, drilling,

bolting etc. as per design as required and painted with one coat of primer and two

coats of enamel paint of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of

following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. as

required for fixing and including the cost of providing loop earthing with 2 nos.

50 mm x 6 mm GI earth strips complete as per specifications, as required and as

7.2 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized

raceway with internal partition/compartmentized of the following sizes

including providing removable 3 mm thick GI cover, knock out holes and fixing

accessories earthing with 8 SWG copper earth wire complete as required including

floor supports, bends, access boxes, tap off boxes and cross over as per

specification and site requirement. (overhead / wall mounted recovery & function

boxes shall be 1.6 mm thick)

c) MR 150 mm wide x 38 mm deep raceway RM 30 1,290.20 38,706.00

7.4 MR Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI sheet junction Nos. 4 1,537.01 6,148.04

box including providing 3 mm thick stainless steel cover as per specification.

D.1 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. Each 13.00 -

D.2 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature -

circuit breaker suitable for inductive load of following poles in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

D.3 2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB -

DB complete with connections, testing and commissioning etc. as required.

D.4 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet -

steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper

bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/ RCCB/ Isolator)

D.5 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 -

volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300

milliamperes in the existing MCB DB complete with connections, testing and

commissioning etc. as

D.6 MR Charges for shifting of existing EPBAX room to new roo complete as per instruction of L.S 1 25000 25,000.00

Engg- In charge

SCHEDULE OF QUANTITIES-HVAC

S NO 2019/DSR EM DESCRIPTION UNIT QTY. RATE

DSR ITEM NON DSR ITEM

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units

suitable for cooling and heating, having all hermetically sealed inverter type

Scroll Compressor(s), minimum two compressors for above 14 HP

modules,microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation

etc. complete as required. The unit shall deliver the rated capacity at AHRI

Conditions and work even at 50°C ambient temperature without tripping.The

unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power

supply. The unit shall be filled with first charge of the refrigerant and ready for

use as required. The COP at AHRI conditions shall not be less than 3.1 and

IEER not less than 6.5 .

Supply, installation, testing and commissioning of following minimum

capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit

equipped with synthetic washable media pre-filter, fan section with low

noise fan/dynamically balanced blower, multispeed motor, coil section with

DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

2 2 necessary supports, vibration isolation, cord less remote control etc., suitable

for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as

required. The unit shall have automatic force shut down provision in case of

fire on receiving signal from BMS System. The cooling capacity of indoor unit

will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

2.5 MR Corded Remote Nos. 12 2,500.00 30,000.00

Lifting, Shifting, Supply, Installation, Testing & Commissioning of

3 Interconnecting "Y" & "T" Joints i.e. Refnet Joints/ Header with Insulation for

refrigerant piping

3 Copper piping

Supply, Installation, testing and commissioning including vaccumiazation

and Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV/VRF system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as

given below for Suction and Liquid lines, all accessories as per specifications

etc. as required :

6.4 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick

9.5 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick

12.7 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick

15.86 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick

19 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick

22.2 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick

28.58 mm dia (OD) (Soft Drawn) with tube thickness 1.2 mm with 19 mm thick

6 Cable Wiring

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes

6.1 1.14 of FRLS PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit asc required.

7 Drain Piping

Supply, installation, testing and commissioning of PVC drain water with

necessary clamps, fittings

such as bends tees etc. and duly insulated.

MR 40 mm dia (9 mm thick insulation) Rm 95 374.00 35,530.00

Designing, fabricating, transporting, unloading, storing, fixing in position,

testing and commissioning the following sheet steel cubicle type panels

fabricated from 1.6mm thick CRCA sheet, dust and vermin proof, indoor

type TPN Panels with hinged lockable doors fabricated from 2mm thick

CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear

access for cable alley and with segregated bus-bar chamber with tinned

aluminium bus bar and including supplying and fixing following switchgears,

meters and accessories, inter-connections, bonding to earth, powder

coated painting and marking as specified. Switch boards complete as per

schematic diagram:or its equivalent as per the requirement of site

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic

diagram and as detailed in

the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker

of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat

shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required

intervals complete for cross section, size supports & their spacing etc. for

withstanding fault level of 25 MVA for 1 Sec

a) 40 Amps, TPN, MCB+ ELCB -2 Nos.

b) 32 Amps, TPN, MCB + ELCB - 2nos Each 1 1,02,895.00 1,02,895.00

Panel Complete as above

WIFI- DATA AND NETWORKING

S NO DSR/ MR DESCRIPTION UNIT QUANTITY

RATE TOTAL AMOUNT TOTAL AMOUNT

RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the

growing requirements of wireless networks by delivering a better user

experience. The 1830 Series extends support to a new generation of Wi-Fi

clients, such as smartphones, tablets, and high-performance laptops that have Nos. 1 68,820.00 68,820.00

integrated 802.11ac Wave 1 or Wave 2 support.

(DSR Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

1.53.1) Connectivity of Hub to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, METRE 410 57.00 23,370.00

Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installation , Testing and Comissioning of I/O port for CAT6 cable Nos. 12

termination 400.00 4,800.00

at Workt table end. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos. 12

at Work Table end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow 400.00 4,800.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos. 12

termination 400.00 4,800.00

at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos. 12

at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow 400.00 4,800.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) 12

for information outlet (I/O) to end user device connectivity.High Speed Gigabit

24AWG U/UTP Patch Cord Blue, LSZH, C6, 2M Nos. 400.00 4,800.00

Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) 12

for information outlet (I/O) to Rack end device connectivity. (Rack end), High

Speed Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M Nos. 400.00 4,800.00

Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) 12

for information outlet (I/O) to end user Redantant device connectivity.High

Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow) Nos. 400.00 4,800.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) 12

for information outlet (I/O) to Rack End Redantant device connectivity.High

Speed Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow) Nos. 400.00 4,800.00

Digitally signed by AMIT

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Nos. 1

Jack Panel for CAT6 cable termination at rack end. Data Active

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Nos. 0

Jack Panel for CAT6 cable termination at rack end. Data Active Redandant 3,500.00 -

UTP Components for VOICE -

(DSR Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

1.53.1) Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6 RM 410 57.00 23,370.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos. 12

termination 400.00 4,800.00

at Work table end. Keystone Unshielded Outlet, 180DG C6, (Ivory)

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable Nos. 12

termination 400.00 4,800.00

at Rack end. Keystone Unshielded Outlet, 180DG C6, (Ivory)

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

at Rack End. Keystone Unshielded Outlet, 180DG C6, For Voice Active Riser Nos. 12 400.00 4,800.00

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Nos. 1

Jack Panel for CAT6 cable termination at rack end. Voice Active

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Nos. 1

Jack Panel for CAT6 cable termination at rack end. Voice Active --- Riser Side 3,500.00 3,500.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet)

for information outlet (I/O) to end user device connectivity. (Rack end), High

Speed Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M Nos. 8.00 400.00 3,200.00

Supply , Installtion , Testing and Comissioning 24 port Poe switch for internet.

Supply , Installtion , Testing and Comissioning 8 port switch for CCTV Nos. 1.00 15,800.00 15,800.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CCTV

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265

Vandal Proof Dome camera with 2.8 to 12mm

Motorized Lens,Smart IR, up to 30M IR distance,Up to 120 dB

WDR (Wide Dynamic Range),3D DNR (Digital Noise

1 MR Reduction),H.265+, H.265, H.264, MJPEG,Corridor mode, Nos 7 10000.00 70,000.00

Triple streams,3-Axis, IP67, IK10 Vandal Resistant,Colour:

0.005Lux (F1.4, AGC ON), 0 Lux with IR,Video Compression

2 Supply, Installation, Testing and Commissioning of

16Ch Embedded Network Video Recorder with 4 Sata

MR Supports 1 ×RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Nos 1 20000.00 20,000.00

Redundant power

3 SITC of SSD Hard Disk Drive 6TB, 24/7 surveillance Nos 1 20000.00

MR category Only complete etc as required.etc.all complete. 20,000.00

Supply, Installation, Testing & Commissioning of 32" Flat Screen

HD led (24X7) with Interfaces include HDMI, DVI, D-

sub, Component and Composite input as well as RS-232C

4 and RJ45 for extensive connectivity, remote control and 1 30000.00 30,000.00

wall mount unit / floor stand complete with making

connections etc complete as reqd.

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 1 6200.00 6,200.00

Supply , Installtion , Testing and Comissioning of sheilded RM 570 57.00

6 MR twisted pair CAT 6 cable(STP) complete etc as required 4 pair 32,490.00

Total : A - CCTV 1,78,690.00

Digitally signed by AMIT

Electrical Lighting

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of Recessed luminaire with LED (Light

Emitting Diode), system power: 28 W, luminous flux of 2800 lm, colour temperature of 6000

K, Neutral white, 230 V constant current driver, 70% of luminous flux after 50,000 operating

hours, energy-efficient LEDs, CRI

1 MR > 80, CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct light emission, Luminaire housing in Aluminium Nos 45 2899 1,30,455.00

Extrution, polyester white powder coat applied over a 5- stage pre-treatment, Opal diffuser

for glare-free uniform light, integral electronic control gear,

Supply, Installation, Testing and Commissioing of Recessed downlight with HPE (High-

Performance Efficiency) with LED (Light Emitting Diode), system power: 12 W, Luminous flux of

luminaire 1320 lm, 110 LM/W system efficacy, Colour temperature of 4000 K, Neutral white, CRI >

80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-

efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester powder white

2 MR coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for Nos 65 1395.00 90,675.00

homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant/Recessed luminaire with LED (Light

Emitting Diode), system power 28 W, luminous flux of luminaire 3080 lm, 110 LM/W

system efficacy, direct light emission CRI>80, colour temperature of 4000K, Neutral white,

230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient

3 MR LEDs, luminaire profile in aluminium, Plastic moulded end caps, Polyester powder Nos 10 3450 34,500.00

Aluminium white coloured coat applied over a 5- stage pre-treatment, high efficiency glare-

free snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS (Zero Halogen

Low Smoke) internal wiring, integral Electronic control gear, adjustable suspender,

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max = 1500 mm

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FAS

FIRE DSR/ MR DESCRIPTION UNIT QUANTIT RATE TOTAL AMOUNT

FIRE DSR/ MR DESCRIPTION UNIT QUANTIT RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of Pcs

intelligent analog addressable photothermal detector

1 17.2.4 complete with mounting base complete as required. 10.00 2,858.00 28,580.00

Supplying, installation, testing & commissioning of Pcs

addressable manual call point complete as required.

Supplying, installation, testing & commissioning of Pcs

17.2.15 addressable horn cum strobe complete as required. 2.00 3,506.00 7,012.00

Supplying, installation, testing & commissioning of fault Pcs

17.2.7 isolator complete with base as required. 2.00 3,270.00 6,540.00

Supplying, installation, testing & commissioning of Pcs

response indicator on surface/recessed MS Box having

17.2.5 two LED, metallic cover complete with all connections 2.00 276.00 552.00

etc as required.

CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured RM

cable, 600/1000V rated with annealed copper

17.5.2 conductor having XLPE insulation, steel wire armouring & 210.00 173 36,330.00

FRLS outer sheath complete as required.

Supplying and fixing of fire panel conventional as per Nos

5 MR instruction of EIC 1.00 22500

Digitally signed by AMIT

FURNITURE DETAILS

TOTAL AMOUNT TOTAL AMOUNT

TOTAL AMOUNT TOTAL AMOUNT

S No DRS NO. Item Item Description Unit Qty Rate

DSR (INR) NON-DSR

Providing and placing in position mid back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is

made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w)

× 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888

for 25% compression. The armrest has an up=Down adjustment of 8.5 ± 0.5cm which is provided in armrest structure.

Armrest top has an integrated layer of thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon

with textured top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving type, Single

1 MR Mid back chair Nos 30 11,500.00 3,45,000.00

point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2.

The lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The

height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad

has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. It shall be SCS IAQ certified for Indoor Air Quality.Complete

all as per the direction of Engineer in Charge.

Providing and placing in position high back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back

is made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn. Seat Size:-

47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2 kg/m cube and hardness 16± 2 kgf as

per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.5 ± 0.5cm which is provided in armrest

structure. Armrest top has an integrated layer of thermoplastic elastomer. Armrest is made up of plastic injection moulded

High back chair nylon with textured top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving type,

for All cabin Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration

of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric.

The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber

pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. This shall come along a headrest from same family. It shall

be SCS IAQ certified for Indoor Air Quality.Complete all as per the direction of Engineer in Charge.

3 MR Student Chair Ergonomic design High Quality virgin plastic kids chair Nos 4 1000.00 4,000.00

Providing and placing in position Study chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. Chair Size:-

4 MR Study Chair 55cm(w) × 50cm (D). The lumber support consists mouled polyurathene foam & covered with PU leather fabric.. It shall be Nos 36 5,200.00 1,87,200.00

SCS IAQ certified for Indoor Air Quality.Complete all as per the direction of Engineer in Charge.

Providing and placing in position of main table of main table with overall size of table 2100 x 1980 x 750mm. The main

table shall be of size 2135 x 900 x 750mm. The side unit shall be 1050 x 450 x 675mm The table is made of 25 mm thick

MDF.Both Side 1mm laminate pressed on to top with 2 mm edge bending tape. Soft closing access flap within-build

power box are provided on work surface for wire management. The understructure is made of 25 mm thick Pre-laminated

twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is

5 MR FF Cabin1 Table Nos 1 40,000.00 40,000.00

made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm

thick PVC lipping. Drawer fronts made of 18 mm thick MDF one side pre-laminate board with 1mm laminate pressed on to

top with 2 mm edge bending tape pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long

metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing . Handles are provided for ease of

opening. Pedestals are provided with lock for security.complete all as per the direction of Engineer-in-charge.

Digitally signed by AMIT

Providing and placing in position of main table of main table with overall size of table 2100 x 1575 x 750mm. The main

table shall be of size 2100 x 750 x 750mm. The side unit shall be 900 x 375 x 675mm The table is made of 25 mm thick

MDF.Both Side 1mm laminate pressed on to top with 2 mm edge bending tape. Soft closing access flap within-build

power box are provided on work surface for wire management. The understructure is made of 25 mm thick Pre-laminated

twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is

6 MR GF Cabin Table Nos 2 30,000.00 60,000.00

made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm

thick PVC lipping. Drawer fronts made of 18 mm thick MDF one side pre-laminate board with 1mm laminate pressed on to

top with 2 mm edge bending tape pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long

metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing . Handles are provided for ease of

opening. Pedestals are provided with lock for security.complete all as per the direction of Engineer-in-charge.

Providing and placing in position of reception table with overall size of table 1650 x 1600 x 750mm. The main table shall

be of size 1500 x 675 x 750mm. The side unit shall be 900 x 375 x 675mm. The table is made of 25 mm thick MDF – one side

pre-laminate board confirming to IS-14587:1998 with 1 mm laminate pressed on to top. Soft closing access flap within-

build power box are provided on work surface for wire management. The ERU top is made of 18 mm thick MDF one side

pre-laminate board confirming to IS-14587:1998 with 1mm laminate pressed on to top. The modesty panel is made of 25

Reception Table mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 1mm laminate pressed on to top. The

& FF Cabin 1&2 understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with

matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre- laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 18mm thick MDF one side

pre-laminate board with 1mm laminate pressed on to top pedestal construction is BOX-BOX-FILE type Handles are

provided for ease of opening. Pedestals are provided with lock for security.Complete all as per the direction of Engineer

Providing and placing in position panel & tile based modular workstation, with partition thickness as 52.4 mm

thk and ht - 1200 including powder coated aluminium trims. Tiles: The tiles on the top most frame shall be glass writing

board/ clear glass tile. Bottom tiles - Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel thickness

comprises of 38mm (35 mm Minimum) thick paper honeycomb + 3mm MDF on each sides + 0.6mm decorative

laminate or fabric on both sides. The uprights and horizontals shall be made of aluminium extrusion having average wall

thickness of 1.2 mm & powder coated with epoxy- polyester powder. Particle board framing is used on outer

Work Station boundary of these blocks as well as intermediately at certain locations forming conduit for passing cables.

8 MR L Shape These blocks are located in the mid segment of the panels and can be provided with cutouts for mounting switch Nos 0 - -

boxes (above or below the worktops). Top tiles can be offered in variety of combinations. The fins along the depth shall

be 22.8mm thick. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping edge banding of

size 1350mm W1 x 1450mm W2 x 600D x 750H. Brackets shall be made from 2mm thick CRCA steel. Pedestals

with legs - Nova pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height

3dr = 2box+1file. The work shall be carried out as per the instructions and guidance received from

engineer incharge. The product must be UL Greenguard, BIFMA Level 3 certified.Complete all as per the

direction of Engineer in Charge.

Providing and placing in position of main table with overall size of table 1200 x 1450 x 750mm. The main table shall be of

size 1200 x 675 x 750mm. The side unit shall be 900 x 375 x 675mm The table is made of 25 mm thick MDF – one side pre-

laminate board confirming to IS-14587:1998 with 1mm laminate pressed on to top with 2 mm edge bending tape. Soft

closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25

mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with1mm laminate pressed on to top with 2 mm

edge bending tape. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-

14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin

FF Reading area board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made

9 MR Table 1 &2 of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick Nos 4 32,500.00 1,30,000.00

PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 1mm laminate pressed on to top

with 2 mm edge bending tape pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal

Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are

provided for ease of opening. Pedestals are provided with lock for security.complete all as per the direction of Engineer-in-

Digitally signed by AMIT

Providing and placing in position Centre table.The Glass shall be 10+/-0.3mm thick black tinted toughened glass UV

Reception glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade

Waiting FF having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 900mm Depth=750mm

height=450mm.Complete all as per the direction of Engineer in Charge.

11 MR Providing and Placing in the position of three seater long sofa has been designed for visitors. Nos 2 35,000.00 70,000.00

12 MR Providing and placing in position Kids table. Size 900mmx 900mmx 400mm. Worktop shall be made from 25mm thick MDF Nos 1 14500.00 14,500.00

one side prelaminate board with 1mm laminate pressed on to top with 2 mm edge bending tape on sides.

13 MR Providing and placing in positionStudy table. Size 900mmx 900mmx 750mm. Worktop shall be made from 25mm thick Nos 4 25000.00 1,00,000.00

MDF one side prelaminate board with 1mm laminate pressed on to top with 2 mm edge bending tape on sides.

14 MR Library area 1 Providing and placing in positionStudy table. Size 750mmx 600mmx 750mm. Worktop shall be made from 25mm thick Nos 1 12000.00 12,000.00

MDF one side prelaminate board with 1mm laminate pressed on to top with 2 mm edge bending tape on sides.

15 MR ReadingTable Nos 4 10000.00 40,000.00

s Refurbish Repairing Exisiting table & making electrical provision with Repolish. Size 1800mmx 1200mmx 750mm.

16 MR ReadingTable Nos 1 40000.00 40,000.00

s Refurbish Repairing Exisiting table & making electrical provision with Repolish. Size 3600mmx 1800mmx 750mm.

17 MR existing Nos 2 3500.00 7,000.00

Refurbish Repairing Exisiting table & making electrical provision with Repolish. Size 1800mmx 1800mmx 650mm.

18mm thick pre-laminated HDHMR board for durability and strength

Full Height Shelves made of 18 mm thickness and back made of 12 mm thickness

18 MR storage 2400mm Door storage cabinet with lock and key facility with sheves and filing drawers SQM 38 10,500.00 3,99,000.00

Ht. 400 mm Depth , 2 tone laminate on shutter

Size- Design as per the engineer incharge

18mm thick pre-laminated HDHMR board for durability and strength

Shelves made of 18 mm thickness and back made of 12 mm thickness

19 MR Slider glass shutter cabinet with lock and key facility with shelves as per books SQM 48 5,600.00 2,68,800.00

400 mm Depth , 1mm laminate on complete carcase

Size- Design as per the engineer incharge

18mm thick pre-laminated HDHMR board for durability and strength

KidsMedium Ht. Shelves made of 18 mm thickness and back made of 12 mm thickness

20 MR Storage 1200mm Door storage cabinet with lock and key facility with sheves and filing drawers SQM 3 10,500.00 31,500.00

ht 450 mm Depth , 2 tone laminate on shutter

Size- Design as per the engineer incharge

18mm thick pre-laminated HDHMR board for durability and strength

Low Height Shelves made of 18 mm thickness and back made of 12 mm thickness

21 MR storage 750mm Door storage cabinet with lock and key facility with sheves and filing drawers SQM 10.68 10,500.00 1,12,140.00

ht. 450 mm Depth , 2 tone laminate on shutter

Size- Design as per the engineer incharge

18mm thick pre-laminated HDHMR board for durability and strength

Overhead Shelves made of 18 mm thickness and back made of 12 mm thickness

Storage Door storage cabinet with lock and key facility with shelves 300 mm Depth , 2 tone laminate on shutter

Size- Design as per the engineer incharge

18mm thick HDHMR board for durability and strength

Shelves made of 36 mm thickness and back made of 12 mm thickness

23 MR adjusted as per Client Requirement with all visible area with 1mm laminate SQM 60 7500 4,50,000.00

Size- Design as per the engineer incharge

Digitally signed by AMIT

36mm thick laminated HDHMR board for durability and strength

with cold rolled steel sheet thickness 1mm as per site incharge with combination of wood & Metal display storage book

Book Shelf Both

558 mm Depth , 2 tone laminate on shutter

Size- 1850mm x 558mm x 2100mm Check durabilty as per site books weight

36mm thick laminated HDHMR board for durability and strength

25 MR Magzine Shelf Nos 5 4500 22,500.00

Size- 900mmx750mmx400mm still the site incharge will guide the size

Rotatble Book 18mm Thick Laminated HDHMR board with Base & Rotatable top

Shelf with Dia of 750mm & Height 1200mm

Digitally signed by AMIT

Schedule of Quantities: Signages and Artwork

S No Description Unit Qty Unit price DSR Non-DSR Amount

1 MAIN SIGNAGE

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted Each 1 5000 5,000.00

/White milky acrylic 3mm laser cut pasted on top with proper names (Library) laser cut

acrylic letters in approved colour.Fixing provision using 3M VHP double sided tape as required.

Signage Size 36x18 inch

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted

/White milky acrylic 3mm laser cut pasted on top with proper names/ Departments written

using plottercut vinyl or laser cut acrylic letters in approved colour.Inserting provision for

changing names .Fixing provision using 3M VHP double sided tape as required. Each 6 1,967.00 11,802.00

Signage Size 12x5 inch

3 FLOOR DIRECTORY

Providing and fixing of Acrylic signageboard of 5mm Acrylic with textured wood finish pasted /White

milky acrylic 3mm laser cut pasted on top with proper names

/Departments written using plottercut vinyl or laser cut acrylic letters in approved colour. Provision Each 2 10,000.00 20,000.00

of fixing screws/ Studs etc or as per the direction of the engineer.

4 FIRE EVACUATION MAP / SIGN.

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with Evacuation Plan Each 2 2,250.00

Printed on photoluminescent media and inserted between the two frames. Should be fixed on 4,500.00

the wall using 4 Screw/ SS studs. Size 12 inch x 17 inch

5 FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Made from acrylic sheet of 8 mm

thickness laser engraved, Transformer to be inbuilt. Maintenance free sealed nickel cadmium

battery included • 120V/277V AC Operation • Crystal clear acrylic face panel• Engraved letters

increase visibility • Anodized aluminum faceplate • Field applied chevron directional indicators Each 2 2,850.00 5,700.00

simplify installation • Long life, energy-saving LED lamps • Dual-voltage 120V/277V AC

Operation • UL listed. To be installed at stairs entry. Size 310mm x 175mm

6 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet at base with

photoluminescent film self adhesive & colored vinyl ( Red/Green) Plotter cut and pasted on top.

Both side / Single Side facing Complete including fixing on wall with screws and washers or hanging

on ceiling with GI chain/GI Bar complete as per technical specifications and directions of Engineer.

a Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 4 617.00 2,468.00

b Photoluminescent, Floor Level - 18"x6" Each 4 617.00 2,468.00

c Photoluminescent, Fire Alarm Call Point - 10"x8" Each 4 535.00 2,140.00

d Photoluminescent, Fire do not use lift- 10"x8" Each 4 535.00 2,140.00

e Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 8 535.00 4,280.00

Digitally signed by AMIT

7 Wall Art Duplex wall

Hand painting directly on wall Creating design and creation of Art work concept on given

subject. With initial visit to site, preparation of various designs with different material,

providing the samples, layout for approval, improvisation in short listed creative’s and

making of final layout for final production by enlargement of drawing as per ratio of 3 Sqm 4000.00 12,000.00

actual size, to prepare detailed drawings (full scale) based on the Concept drawings .

8 Wall Painting Digital Art

Customised wall Painting with Moulding frame & Canva Digital print as mentioned by

team/Client with 4mm Mdf back & canva pasted on top of it with moulding 35mm 3 Sqm 750.00 2,250.00

TOTAL 74,748.00

Digitally signed by AMIT

S.No DSR 2020 / MR Rate (In DSR Amount (In

Description Quantity Unit DSR Rate MR Amount

Trenching in ordinary soil up to a depth of 60 cm

including removal and stacking of serviceable materials

and then disposing of surplus soil, by spreading and

2.1 neatly levelling within a lead of 50 m and making up the 464 Cum 78.10 36238.40

trenched area to proper levels by filling with earth or

earth mixed with sludge or / and manure before and

after flooding trench with water (excluding cost of

imported earth, sludge or manure)..

2 Supplying and stacking of well decayed cattle manure at

2.25 site including royalty and carriage up-to 5 km. lead 250 Cum 247.50 61875.00

3 Supply of farm yard manure (FYM)/leaf mould in bag

containing 20 kg in a bag at site.

Supply and stacking of garden soil (sandy loam) at site.

5 Rough dressing the trenched ground including breaking

6 2.7 Fine dressing of the ground. 7500 Sqm 3.70 27750.00

7 Spreading of sludge, dump manure and/or good earth in

required thickness as per direction of Engineer-in-

charge. (cost of sludge, dump manure and/ or good

earth to be paid separately).

Anti-termite treatment of lawn area through premise

2.56 30.50% I P. one liter premise diluted in 499 liters water 7500 Sqm 7.55 56625.00

and applying solution @ 1.00 litre solution per sqm lawn

or bed area.(two application) i/c cost of chemical) and as

per direction of Engineer-in-charge

9 Mixing earth and sludge or manure in the

2.9 required proportion specified or 450 Cu m 36.55 16447.50

directed by the Engineer-in- charge.

Digitally signed by AMIT

Digging holes in ordinary soil and refilling the same with

the excavated earth mixed with manure or sludge in the

ratio of 2:1 by volume (2 parts of

stacked volume of earth after reduction by 20% : 1 part

2.14 of stacked volume of manure after reduction by 8%)

flooding with water, dressing including

removal of rubbish and surplus earth, if any, with all

leads and lifts (cost of manure, sludge or extra good earth

if needed to be paid for separately)

holes 1.2 m dia and 1.2 m deep

holes 60 cm dia and 60 cm deep

holes 45 cm dia and 45 cm deep

13 Grassing /Laying with Mexican grass turf including

watering and maintenance of the lawn for 60 days or

more till the grass forms a thick lawn, free from weeds

and fit for mowing including supplying good earth, if

needed (the grass and earth shall be paid for

14 Supply of shade loving Zosefia grass turf with earth

20mm to 25mm thickness of existing ground

prepared with proper level and ramming with tools

wooden (Dhurmos) and than rolling the surface with

light roller make the surface smoothen and light

waterning with sprinkler and maintenance for 30 days or

more till the grass establish properly, as per direction of

Engineer- in-charge.

Preparation of beds for hedging and shrubbery by

excavating 60 cm deep and trenching the excavated base to

a further depth of 30 cm, refilling the excavated earth

after breaking clods and mixing with sludge or manure in the

ratio of 8:1 (8 parts of stacked volume of earth after reduction

2.13 by 20%: one part of stacked volume of sludge or manure after 75 Cum 222.85 16713.75

reduction by 8%), flooding with water, filling with earth if

necessary, watering and finally fine dressing, leveling etc.

including stacking and disposal of materials declared

unserviceable and surplus earth by spreading and leveling as

directed, within a lead of 50 m, lift upto 1.5 m complete (cost

of sludge, manure or extra earth to be paid for separately).

Digitally signed by AMIT

Supply and Stacking of Dypsis decaryi (Triangle palm)

Palm plant at site with the ht. 210- Nos

240 cm. with 12 to 14 suckers, well developed, fresh and

healthy with lush green foliage in 35 cm size of big poly

bag & as per direction of the Engineer-in-charge.

17 Supply and stacking of wodyetia bifurcata plant of ht.

240-270 cm bottom girth 35- 40 cm well developed in Nos

big size HDPE bags as per direction of the Engineer- in-

Supply and Stacking Travelar palm plant well developed

MR with fresh & healthy leaves foliage at site with the 220 to 20 2000.00 40000.00

250 cm ht specimen plant in 40 cm bag

& as per direction of the Engineer-in-charge.

Supply and Stacking Phoenix dectaliformis palm plant

MR well developed with fresh & healthy leaves foliage at site 40 1350.00 54000.00

with the 115 to 130 cm ht specimen plant in 20 cm bag

& as per direction of the Engineer-in-charge.

20 Providing and Roystonia regia (Royal Palm)/maxican

Fan Palm plant well developed with fresh & healthy

MR leaves foliage at site with the 425-450 cm ht specimen 20 4090.00 81800.00

plant in 40 cm big bag & as per direction of the

Engineer-in-charge.

21 Supply and stacking of plant Ficus panda of height 60- 90

cm, with 8-10 branches, and healthy foliage, bushy in big Nos

size HDPE bag as per direction of the Engineer- in-

Supply and stacking of plant Humingbird bush of height Nos

60-75 cm. with 6-8 branches in poly bags of size 25 cm as

per direction of the Engineer- in-charge.

22 Supply and Stacking of Dracaena rosea plant, having ht.

45 cm & above with 8 to10 leaves, well developed, fresh Nos

and healthy in Poly bag & as per direction of the

Engineer- in-charge.

23 Supply and Stacking of Dracaena (Song of India Green)

plant, having ht. 45cm

MR & above with 8 to10 leaves, well developed, fresh and 225 318.00 71550.00

healthy in Poly bag & as per direction of the Engineer-in-

Digitally signed by AMIT

24 Supply and Stacking of Dracaena (Margineta) plant,

having ht. 45 cm & above with 8 to10 leaves, well Nos

developed, fresh and healthy in Poly bag & as per

direction of the Engineer- in-charge.

Supply and Stacking of Dracaena

fragrans”Massangeana"/victo ria plant/waranickii Nos

plant plant, having ht. 45-60 cm with full of

leaves, well developed, fresh and healthy in Poly bag &

as per direction of the Engineer-in-charge.

26 Supply and Stacking of Croton petra Bangalore variety

plant, having ht. 60-75 cm with 4 to

MR 6 branches, well developed, fresh and healthy colourfull 175 400.00 70000.00

leaves in Poly bag & as per direction of the Engineer-in-

27 Supply and Stacking of plant Cpressus golden of height

130-150 cm., conical haped, well formed with healthy Nos

foliage in Poly bag

& as per direction of the Engineer-in-charge.

28 Supply and Stacking Agave foetida plant hybride well

developed with fresh & healthy foliage 10 and above Nos

attractive leaves in Poly bag & as per direction of the

Engineer-in-charge.

Supply and Stacking Nolino plant well developed with Nos

fresh & healthy foliage 20 and above attractive leaves

in poly bag & as per direction of the Engineer-in-charge.

Supply and Stacking of Red Latan Palm(Latania

MR lontaroides) plant, having ht. 60 cm to 75 cm, well 30 1409.00 42270.00

developed with 8 to 10 leaves, fresh & healthy foliage in

Poly bag & as per direction of the Engineer- in- charge.

31 Supply and Stacking Cycus cirsnallis plant well

developed with fresh & healthy 35 to 40 lush green Nos

leaves in poly bag & as per direction of the Engineer- in-

Supply and Stacking Ficus black /starlight pillar shape

MR plant with fresh, healthy and attractive foliage 70 to 75 85 790.00 67150.00

cm spread, specimen bushy plant in Poly bag & as per

direction of the Engineer-in-charge.

Digitally signed by AMIT

Supply and Stacking Bamboo Buddha vally variety

MR with umbrella shape plant having 180cm to 210cm ht. 225 850.00 191250.00

with fresh & healthy foliage well developed in Poly bag

& as per direction of the Engineer-in-charge.

Supply and stacking of Bougainvillia spp single head ball Nos

topiary ht. 85-100cm well developed in big size HDPE

Bags as per direction of the Engineer-in-charge.

Supply and Stacking of Lady palm plant, having ht.

120 cm with 12 to 15 equal suckers, well developed,

full of fresh & healthy leaves from bottom to top in Poly

bag & as per direction of the Engineer- in- charge.

36 Supply and Stacking Pine topiary well developed with

fresh & healthy 5 to 6 big ball specific size and shape 150 Nos

to 180cm ht in poly bag & as per direction of the

Engineer-in- charge.

37 Supply and Stacking Golden Bottle Brush topiary well

developed with fresh & healthy 5 to 6 big ball specific Nos

size and shape 150 to 180cm ht in poly bag & as per

direction of the Engineer-in- charge.

Supply and Stacking of Alpinia Variegated (three in one)

10225.0 plant having ht. 30 cm and above, with fresh and healthy 50 121.00 6050.00

variegated foliage in Poly bag (minimum 25 Nos. per

sqm) as per direction of the Engineer-in- charge.

39 Supply and Stacking of Verbena plant of height 15 cm to

20 cm, bushy and multi- branches in Poly bag (minimum

25 Nos. per Sqm) as per direction of the Engineer-in-

Supply and Stacking of Ophiopogon jaburan( variegated) Nos

plant,full of variegated leaves in Poly bag

& as per direction of the Engineer-in-charge.

MR Supply and stacking of Madhumalti plant, branches in 50 125.00 6250.00

Poly bag & as per direction of the Engineer-in-charge.

Digitally signed by AMIT

Providing and Displaying of Raphis palm plant, having ht.

75 cm to 90 cm with 12 to 15 equal suckers, well Nos

developed, full of fresh & healthy leaves from bottom to

top in 25 cm size Earthen pot / Plastic pot

& as per direction of the Engineer-in-charge.

Providing and Displaying of Terminelia mantly plant of Nos

height 165-180 cm. thick stem in big size in 36 cm

Cement Pot as per direction of the Engineer-in- charge.

44 Providing and Displaying of Ixora var.height 30 cm to 45

MR cm. in 20 cm size of Earthen pots / Plastic pots & as per 50 500.00 25000.00

direction of the Engineer-in- charge.

45 Providing and Displaying of Codiaeum variegatum plant,

having ht. 45 cm & above with Nos

2 to 3 branches, well developed, fresh and healthy leaves

in 25 cm size of Earthen pot / Plastic pot.

46 Providing and Displaying of Monkey Palm (Bamboo

palm) plant, having ht. 130 cm & above with 8 to10

MR clubs, well developed, fresh and healthy in 20 cm size of 100 500.00 50000.00

Earthen pot / Plastic pot & as per direction of the

Engineer-in-charge.

47 Providing and Displaying of Ribbon grass/Fountain grass

having ht. 30 cm & above with 8 to10 leaves, well

MR developed, fresh and healthy in 20 cm size of Earthen 155 115.00 17825.00

pot / Plastic pot & as per direction of the Engineer-in-

Supply of fox 14"fiber planter square/round.

Supply of fox 20"fiber planter square/round.

supply of G.T. fox rectangular planter(90*30*30cm)

51 Supply of 6-8"ceremic pot for table top with the NASA Nos

aproved indoor air purifying plants.

supply of fox rectangular fiber planter(60*30*15cm)

53 MR supply of potting mixture for pots 1500 Kg 36.50 54750.00

MR Supplying and installing of Foundtain of granite/ marble 1 Nos 125000.00 125000.00

including lighting as per instruction of Engg In charge

Digitally signed by AMIT

Structural steel work riveted, bolted or welded in built

up sections, trusses and framed work, including cutting, 550 KG 133.70 73535.00

hoisting, fixing in position and applying a priming coat of

approved steel primer all complete.

Structural steel work riveted, bolted or welded in built

up sections, trusses and framed work, including cutting,

hoisting, fixing in position and applying a priming coat of

approved steel primer all complete.

10.16.1 Hot finished welded type tubes 2200 KG 194.40 427680.00

Digitally signed by AMIT