Construction of New Panchayat Office Building in Melnagar Panchayat Survey No . 367/1 West Arni Block of Tiruvannamalai District under AGAMT II 2024 2025

Amount

Construction of New Panchayat Office Building in Melnagar Panchayat Survey No:367/1 West Arni Block of Tiruvannamalai District under AGAMT II 2024 2025

Panchayat Office Building

Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation.

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.

Cement concrete 1:2:4 mix usin 20 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete.,For Foundation

Supplying and filling with filling sand in layers not more than 15 cm thick ,well rammed, wattered and compacted etc,complete For Foundation

Supplying and Filling the Excaveted Earth including cost and conveyance and filling charges etc., as per std. Specification

Brick work with cement mortar 1:5 mix using II class bricks for foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc ,complete.

Column above Grade beam

Perapat Wall

Reinforced cement concrete 1:11/2:3 mix using 20 mmHBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete.,

For Column upto Lintel

Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc.

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete., Below G.L

Above G.L

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Paving the floor with heat proof tiles and 0.30 x 0.30 x 0.18 mm size laid in cm 1:2 20mm thick and pointing with white cement using 0.40kg/sqm mixed with colouring pigments to suit colour of the tiles including finishing etc. complete

Paving the Floor with scratch proof vertified tiles of size 600x600x8mm laid in CM 1;2,10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to siut the colour of the tiles including cost and conveyance of all materials to site and all labour charges etc complete

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Dadooing the walls with new Glazed tiles of size 150 x150 x6 mm laid in CM 1:2 ,10 mm thick and pointig with white cement using 0.40 Kg/m2 including finishing the joint and pointing flush with ties surface

Plastering with Cement Morter 1:5 mix 12 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Plastering with Cement Morter 1:3 mix 10 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete. Door 1.00 x 2.50 m

Toilet door 0.75 X 2.10 m

Fabrication and supply of mild steel Window of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete. Window 1.2 x 1.3 m

Window 1.8 x 1.3 m m

Towards cost and supply of Rolling shutter of size 1.20X2.10m

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Painting two coats with approved Plastic Emulsion paint over one coat of Primaring coat over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers. (S.I No. 359 B)

Painting two coat of new iron works such as steel Doors,windows,ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats,ete.

Labour charges for fixing of Steel Door including all labour charges etc. complete. (SOR PG 28 SI NO 114)

Solid PVC Door Shetter using 19mm MS Sq Tube forstrap(Sor pg 42 SI no 125)

Supply and fixing of Water closet with "P" trap, PVC Pipes, Jolly 0.60 x 0.45m, Precast slab for Manhole cover & Lock and key etc. complete.

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of

Cost of white glazed earthernware wash hand basin without pedestal

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

Supply and fixing of Pvc tank 1000lit including cost all material and labour charge (SOR PG88 SI NO 362)

Supply and fixing of MS Hand rail including cost of all matrial and labour charge

Electrification Arrangements

LIGHT POINT SD 20

FAN POINT SD 20

FAN point SD112

Plug point (SD38)

CFL lamp (SD80)

TUBE Light Fittings ( SD 88 )

DPI swtich of 500 V (SD142)

G I Pipe (SD69)

Service Wire (SD64)

Bulk head fitting (SD83)

EB Service Connection Deposit SD 129

Water Supply and Sanitary Arrangements

25mm UPVC pipe

25mm UPVC elbow

25mm UPVC Bend

25 mm UPVC Tee

110 mm PVC PIPE 6Ksc

110mm pvc tee

110mm pvc elbow

15 mm diacp down tap

Cost & Supply of Cudappah Slab including cost and conveyance of all materials to work site and labor charges etc complete.

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Pandiayn R