REPAIR REPLACEMENT OF FITTINGS FIXTURES OF INTERNAL ELECTRIFICATION AND CONNECTED WORKS AT ICGS AND ICGAS RATNAGIRI AND REPAIR REPLACEMENT OF EXTERNAL ELECTRIFICATION XLPE HT LT CABLES AND ITS CONNECTED ITEMS AT OTM AND OPERATIONAL TECHNICAL AREAS IN

Amount

Taking down existing unserviceable point wiring of any description/type/size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified & directed by Engineer in Charge.

Disconnecting and removing the MCB DBs from any height, stripping out the fitting for examine replacement of unserviceable spare parts, reassembling, refixing in original position including minor repairs for the smooth functioning and testing complete all as specified & directed by Engineer in Charge.

Material & Labour for Point wiring on surface conduit with 1.5 Sqmm copper conductor single core FRLS PVC insulated unsheathed 1100 Volt multistranded drawn through conduit and including rigid 20 mm PVC conduit and conduit accessories of suitable diameter medium grade and modular accessories including fixing/grouting sunken/ surface along with existing flush box of suitable thickness covered with suitable modular cover plate including running up of 1.5 Sqmm copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for one Light/Fan Point Controlled by One Switch NOTE: 1. Modular Cover Plate is inclusive of the rated quoted by the contractor 2. Cutting & Chases will be measured and paid separately.

All as per Serial item No 3 here in before, but for One light point controlled by two way switch 5 amps, Single Pole.

All as per Serial item No 3 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

All as per Serial item No 3 here in before, but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Serial item No 3 here in before, but for One Bell point controlled by one, one way switch 5 amps, Single Pole.

All as per Serial item No. 3 here in before, but for using 2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sqmm copper conductor FRLS PVC insulated cable as earth continuity conductor.

Material & Labour for Point wiring on surface conduit with 1.5 Sqmm copper conductor single core FRLS PVC insulated unsheathed 1100 Volt multistranded drawn through PVC Casing and Capping and accessories of suitable size and modular accessories including fixing/grouting sunken/ surface along with existing flush box of suitable thickness covered with suitable modular cover plate including running up of 1.5 Sqmm copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for one Light/Fan Point Controlled by One Switch NOTE: 1. Modular Cover Plate is inclusive of the rated quoted by the contractor 2. Cutting & Chases will be measured and paid separately.

All as per Serial item No 9 here in before, but for One light point controlled by two way switch 5 amps, Single Pole.

All as per Serial item No 9 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

All as per Serial item No 9 here in before, but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Serial item No 9 here in before, but for One Bell point controlled by one, one way switch 5 amps, Single Pole.

All as per Serial item No. 9 here in before, but for using 2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sqmm copper conductor FRLS PVC insulated cable as earth continuity conductor

Material & Labour for Point wiring on surface conduit with 1.5 Sqmm copper conductor single core FRLS PVC insulated unsheathed 1100 Volt multistranded drawn through Existing PVC conduit and accessories of suitable size and modular accessories including fixing/grouting sunken/ surface along with existing flush box of suitable thickness covered with suitable modular cover plate including running up of 1.5 Sqmm copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for one Light/Fan Point Controlled by one way switch 5 amps, Single Pole. NOTE: 1. Modular Cover Plate is inclusive of the rated quoted by the contractor 2. Cutting & Chases will be measured and paid separately.

All as per Serial item No. 15 here in before, but for One light point controlled by two way switch 5 amps, Single Pole.

All as per Serial item No. 15 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

All as per Serial item No. 15 here in before, but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Sl item No. 15 here in before, but for One Bell point controlled by one, one way switch 5 amps, Single Pole.

All as per Serial item No. 15 here in before, but for using 2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sqmm copper conductor FRLS PVC insulated cable as earth continuity conductor

Supply & Fixing single pole Modular switch 1 way 6 Amps, one Module

Supply & Fixing single pole Modular switch 1 way 16 Amps, one Module

Supply & Fixing single pole Modular switch 2 way 6 Amps, one Module

Supply & Fixing Modular Bell Push 6 Amps, one Module

Supply and fixing socket outlet modular type multipurpose 2/3 Pin, 6 amps, 230 volts combined 2 Module

Supply and Fixing socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module

Supply & Fixing two Module Modular ceiling fan regulator 5 stepped type heavy duty suitable to work on 230 volts complete all as specified.

Supply & Fixing ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified

Supply & Fixing Single pole and Neutral enclosure with a two pin and earth plug and socket metal clad complete with one sing pole MCB 20 Amps (AC Box) all as specified and directed.

Material & Labour for Submain wiring in replacement with 2 runs of single core 4 sqmm PVC insulated sheathed multistranded FR 1100 volts grade with copper conductor drawn through existing non-metallic rigid PVC conduit and conduit accessories of medium grade including one run of single core 4 sqmm PVC insulated sheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain wiring complete all as specified and as directed.

All as per Serial item No 30, but two runs of single core 2.5 sqmm and one run of single core 2.5 sqmm as earth continuity conductor

All as per Serial item No 30, but two runs of single core 6 sqmm and one run of single core 6 sqmm as earth continuity conductor

All as per Serial item No 30, but two runs of single core 10 sqmm and one run of single core 10 sqmm as earth continuity conductor

Material & Labour for Submain wiring in replacement with four single core 10 Sqmm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn through existing non-metallic PVC conduit and conduit accessories of suitable diameter medium grade including running up of one runs of 10 Sqmm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note: Four runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.

Material & Labour for Submain wiring in replacement with four single core 6 Sqmm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn through existing non-metallic PVC conduit and conduit accessories of suitable diameter medium grade including running up of one runs of 6 Sqmm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note: Four runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.

Material & Labour for Cutting chases, pinning including making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete.

Supply & Fixing of MCCB incoming TPN DB VERTICAL type, suitable for 100/125 Amps MCCB as incommer, made of sheet steel, powder painted with NUTRAL bus bar 160 Amps, neutral link, IP-43-IK09 protection grade 415Volts VTPN with 8-way Double door complete all as specified and as directed by the Engineer-in-Charge. (Note:- Incoming MCCB will be paid separately)

Supply & Fixing of MCB DB made of sheet steel, powder painted with neutral suitable bus bar capacity, neutral link, earth bar and Din rail ,230 Volts SPN with 4-way Double door, IP-43-IK09 protection grade complete all as specified and as directed

Supply & Fixing of MCB DB made of sheet steel, powder painted with neutral suitable bus bar capacity, neutral link, earth bar and Din rail ,230 Volts SPN with 8 way Double door, IP-43-IK09 protection grade complete all as specified and as directed

Supply & Fixing of MCB DB made of sheet steel, powder painted with neutral suitable bus bar capacity, neutral link, earth bar and Din rail ,230 Volts SPN with 12 way Double door, IP-43-IK09 protection grade complete all as specified and as directed

Supply & Fixing of MCB SPN 40 Amps, breaking capacity 10 KA of rating complete.

Supply & Fixing of MCB SP 6 to 32 Amps, breaking capacity 10 KA of rating complete.

Supply & Fixing of MCCB 4 Pole, 125 Amps, 415 Volt breaking capacity 16 KA of rating complete.

Taking down carefully by unscrewing from boards/outlet boxes, fittings such as lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings etc for refixing at site in original position (when found serviceable in all respects complete) Note: Consumable items for Serial Item No 45 to 83 will be measured and paid separately

Supply & Replace switch piano single pole flush type 5 amps, 230 volts

Supply & Replace switch piano single pole flush type 15 amps, 230 volts

Supply & Replace single pole Modular switch 1 way 6 Amps, 1 Module

Supply & Replace single pole Modular switch 1 way 16 Amps, 1 Module

Supply & Replace single pole Modular switch 2 way 6 Amps, 1 Module

Supply & Replace bell push 5 A flush type

Supply & Replace Modular Bell Push 6A, 1 Module

Supply and Replace socket outlet modular type multipurpose 2/3 Pin, 6 amps, 230 volts combined 2 Module complete all as specified and as directed

Supply and Replace socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and as directed

Supply and Replace socket outlet flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts complete all as specified and as directed

Supply and Replace socket outlet flush type multipurpose 2 in 1, 3 Pin, 5/15 amps, 230 volts complete all as specified and as directed

Supply & Replace switch socket combination modular type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified and as directed

Supply & Replace switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps modular type complete all as specified and as directed

Supply & Replace Modular ceiling fan regulator stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed

Supply & Replace electronic type regulator 5 stepped heavy duty for ceiling fan suitable to work on 230 volts complete all as specified and as directed

Supply & Replace bell ding dong working on 230 volts AC Supply complete all as specified and as directed

Supply & Replace lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and as directed

Supply & Replace MCB SP 6 to 32 Amps 240 volts 10KA for fixing on MCB DB's complete all as specified and as directed

Supply & Replace MCB SPN 40 to 63 Amps 240 volts 10KA for fixing on MCB DB's complete all as specified and as directed

Supply & Replace MCB Three pole, 415 volts suitable for fixing on MCB DB of capacity 32/40 Amps including removing the existing unserviceable one and making good the disturbed surface to match with the existing surface complete all as specified and as directed

Supply & Replace MCB Four pole/TPN, 415 volts suitable for fixing on MCB DB of capacity 63/100 Amps including removing the existing unserviceable one and making good the disturbed surface to match with the existing surface complete all as specified and as directed

Supply & Replace MCCBs 415 Volt,16KA, 100 amps 4 Pole suitable for DB including removing the existing unserviceable one and making good the disturbed surface to match with the existing surface.

Supply & Replace MCCBs 415 Volt,16KA, 125 amps 4 Pole suitable for DB including removing the existing unserviceable one and making good the disturbed surface to match with the existing surface.

Supply & Replace MCCBs 415 Volt,16KA, 63 amps 4 Pole suitable for DB including removing the existing unserviceable one and making good the disturbed surface to match with the existing surface.

Supply & Replace ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified.

Supply and replace PVC Round blocks.

Supply and replace PVC Dummy sheets circular type of 4 inch.

Supply and replace PVC Dummy sheets circular type of 6 inch.

Supply and replace Rigid PVC casing & capping 20/25 mm wide.

Supply and replace PVC rectangular box (Gang box) with 5 Amps switch socket.

Supply and replace PVC rectangular box (Gang box) with 5/15 Amps switch socket.

Supply and replace PVC wire of Flexible cord with copper conductor multi standed of twin core 0.5 Sqmm

Supply and replace PVC copper wire of 1.5 sqmm single core multistranded

Supply and replace PVC copper wire of 2.5 sqmm single core multistranded

Supply and replace PVC copper wire of 4 sqmm single core multistranded

Supply and replace PVC copper wire of 6 sqmm single core multistranded

Supply and replace Service wire twin core of 10.0 sqmm aluminium type flat unarmored

Supply and replace Plug top 5 Amps 3 pin 250 Volts

Supply and replace Plug top 15 Amps 3 pin 250 Volts

Supply & Fixing of Surface Modular Box of 12 way along with 12-way Modular plate and 4 Nos of 16/6 Amps Switches and 6/16Amps multipurpose Sockets with connected internal wiring complete all as specified and directed by Engineer in Charge. Note: Modular Plate, Switches & Sockets are inclusive of the rate quoted

Supply & Fixing of Surface Modular Box of 6 way along with 6 way Modular plate and 2 Nos of 16/6 Amps Switches and 6/16Amps multipurpose Sockets with connected internal wiring complete all as specified and directed by Engineer in Charge. Note: Modular Plate, Switches & Sockets are inclusive of the rate quoted

Material & Labour in replacement of PVC 3 Core 1.5 Sqmm all as specified and directed

Material & Labour in replacement of PVC 3 Core 2.5 Sqmm all as specified and directed

Supply and Fix in replacement of XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 10 Sqmm 4 core, laid in trenches/ducts /encased in GI pipe /fixed to pole complete all as specified and directed. Note:- Rate is inclusive of cable gland & cable lugs.

Ditto all as per Serial Item No 88, but for cross sectional area 16 sqmm 4 core.

Ditto all as per Serial Item No 88, but for cross sectional area 25 sqmm 4 core.

Ditto all as per Serial Item No 88, but for cross sectional area 70 sqmm 3.5 core.

Ditto all as per Serial Item No 88, but for cross sectional area 35 sqmm 3.5 core.

Material and Labour in repairs for GI tubing 50 mm diameter medium grade including accessories for protection of cables on poles / under road crossing complete all as specified and as directed.

Ditto all as per Serial Item No 93, but for GI tubing 80 mm diameter.

Ditto all as per Serial Item No 93, but for GI tubing 100 mm diameter.

Supply, fixing and laying of XLPE insulated, screened, PVC bedded galvanised steel strip or wire armored electric power cable heavy duty with aluminium conductor HT 11 KV (E) volts grade cross sectional 95 sqmm 3 core, laid in trenches/ducts/encased in GI pipe /fixed to pole including taking out of unserviceable cable complete all as specified and directed.

Taking up of underground HT Cable of any size along with protection cover/ bricks and removing from site all as directed by Engineer-in-Charge. Note: - The rate shall deem to be includes necessary excavation of cable, retuning & filling/removal of Soil.

Taking down of faulty HT underground cable of size up to 120 sqmm from trenches /pole/wall etc for detecting fault including repair and jointing at site including relaying at the same location complete all as specified and directed. Note: - The rate shall deem to be includes necessary excavation of cable, retuning & filling/removal of Soil.

Taking down unserviceable Under Ground cable from trenches, wall, floor etc. up to 25 sqmm complete all as specified and directed. Note: - The rate shall deem to be includes necessary excavation of cable, retuning & filling/removal of Soil.

Taking down unserviceable Under Ground from trenches, wall, floor etc. above 35 up to 120 sqmm complete all as specified and directed. Note: - The rate shall deem to be includes necessary excavation of cable, retuning & filling/removal of Soil.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cables, erection of poles, struts/stays, leveling of yard etc not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and exceeding 1.5 metre in depth up to 3.0 metre for erection of poles, struts/stays, leveling of yard etc not exceeding 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Material & Labour for sand cushioning to underground cable and punning for cushioning of cable 8cm below the cable and 15cm above cable complete all as specified and directed. Note : Measurement shall be done after puning down of sand.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250 mm x 150 mm x 40 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables for protection complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover class HV type -I, flat of size 300mmx180mmx40mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables for protection complete all as specified and directed.

Relaying dismantled HT cable cover covering with width equal to length of bricks as mechanical protection to cable complete all as specified and as directed

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and as directed

Removing of excavated soil not exceeding 50 Metre from starting points complete all as directed.

Material and labour for end jointing kit, indoor type heat shrinkable, 95 sqmm to 120 Sqmm, 3 core suitable for 11 KV (E), XLPE insulated electric power cable complete all as specified and directed

All as per Serial item No 109 but for outdoor type jointing kit.

All as per Serial item No 109 but for straight through jointing kit.

Supply and Fix male contact/moving contact blade complete suitable for 11 KV GOD vertical type

Supply and fix female contact/fix contact jaw complete suitable for 11 KV GOD vertical type.

Supply and fix pin type porcelain insulator, vitreous white brown or green including one galvanised mild steel spindle two GI washer and GI Nuts 150 mm height 150 mm dia for 11000 volts grade complete all as specified

Supply and fix Disc type insulator, porcelain, vitreous 145mm high and 255mm dia ball and socket type, white, brown or green single disc assembly for tension with tension clamps for conductors, working pressure 11000 volts complete all as specified.

Dismantling of unserviceable insulators any type any size from existing poles all as directed

Material and labour for steel structure, cross arms bracing supports, clamps, back plates of any type, section including nuts, bolts, washers, welding, bending cold or hot in any size and shape all as directed Including two coats of aluminium paints over a coat of red oxide primer including preparation of surface all as directed by Engineer-in-charge

Dismantling of cross-arms of MS channel or angle sections etc. complete as specified and directed

Surface dressing not exceeding 15 cm deep and site clearance in soft and loose soil all as directed by Engineer-In-Charge

Underground Cable Testing / fault detection by authorized agency with Computerized Fault Detection Van complete to find the fault location for 11 KV rated UG cables as directed by Engineer-in-Charge at site. Note :- Any excavation and earth work and cable joint work involved will be measured and paid separately against respective item

Supply and fix switch air break gang operated triple pole mechanically operated mounted on insulator (09 insulators) and steel frame with operating mechanism including spring loaded mechanism set of three working from ground level, including locking arrangement of Current rating up to 200 Amps (Vertical type or horizontal type as per site requirement), 11000 volt complete all as directed by Engineer-In-Charge

Supply and fix in replacement swing out expulsion fuse assembly single pole (drop out fuse) for 11000 Volts of capacity 100 Amps complete with MS channel, post insulators etc complete all as specified

Dismantling air break gang operated switches and drop out fuses vertical/horizontal mounted including insulators and operating mechanism for repair/ replacement of broken/worn out components and insulators etc complete all as directed by Engineer -In-Charge

Supply and fixing in replacement of Danger notice plate of 1.6 mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in single red colour and fixed with MS clamps, bolts and nuts of approved size for HT pole of size 25 x 20 cm size including complete fixing arrangement with iron strip 25mm x 3mm with nut, bolts and paints and including removing of old notice plates etc complete all as specified and directed by Engineer-In-Charge

Dismantling of existing unserviceable HT/LT pole of any size & type from its position carefully and removing from the site and depositing in department store ward and necessary excavation and earth work in any soil/strata, demolition of concrete, disconnection of conductor from pole etc. complete all as directed

Supply and laying synthetic Rubber insulated mats 2 mm thick for voltage up to 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed

Supply, fixing & stringing of ACSR conductor on poles with jumpering and binding with aluminium conductors and in yards with and incl aluminum connectors of required shape and suitable for conductor size and including dismantling of old ACSR conductor etc complete all as directed and specified.

Supply and fix post type porcelain insulator, vitreous white brown or green including one galvanised mild steel spindle two GI washer and GI Nuts 150 mm height 150 mm dia for 11000 volts grade complete all as directed and specified.

Supply and fix fuse wire of 5/10 amps of 11KV volts grade complete all as specified

Supply and fix in replacement of gap less metal oxide type Lightning Arrestor (LA), 9.0 KV grade discharge current 65 KA, distribution class conforming to IS-3070 including taking out old unserviceable LA assembly complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Auguring/ Drilling /Boring of holes under road, pavement, hard standing by trenchless technology by manual /machine, including fixing of HDPE pipe of 100 mm bore diameter complete all as specified and directed by Engineer-In Charge

Material & Labour for cutting of hard standing / Road for laying of pipe line/cable and making good surfaces after laying of pipe line/ cable up to 30cm in depth & width complete all as specified and directed by Engineer-In Charge

Material & Labour for replacement of HT 11 KV bush insulator suitable for distribution transformer of any type Up to 315 KVA.

Material & Labour for replacement of LT bush insulator suitable for distribution transformer of any type up to 315 KVA

Material & Labour for HT bush rod made out of brass with nut bolt and washer suitable for distribution transformer any type up to 315 KVA

Material & Labour for LT bush rod made out of brass with nut bolt, rubber packing and washer suitable for distribution transformer any type up to 315 KVA

Material & Labour for filling of new transformer oil up to minimum level, dielectric strength of oil should not be less than 50KV at 2.5mm gap all as specified and directed by Engineer-In-Charge

Material and labour for painting of DISTRIBUTION transformer indoor/outdoor type with smoke gray color synthetic enamel paint one coat over the existing paint after cleaning and removing the dust and dirt and cleaning with sand paper complete including writing SM Nos and MES No on transformer body with letters 100 mm heigh with white synthetic enameled paint complete for transformer of capacity up to 315 KVA all as specified and as directed by Engineer-in-charge

Supply and fix breather of transformer of various capacities filled with silica gel including taking out of unserviceable silica gel complete all as directed by Engineer-in-charge

Taking of old silica Gel for dehydrating Breather of T/F cleaning the breather internally and externally and filling new silica gel blue colour in dehydrating breather

Material & Labour for replacement of 3 mm thick cable box cover of distribution transformer of any capacity complete including replacement of gasket 6 mm thick and bolts / nuts, washer complete all as specified and directed by Engineer-In-Charge

Supply and installation of fast earth electrode 3.0 metre length size model F84, having two M S pipe one inside the other with proper not deep galvanised outer diameter 88 mm and inner dia 48 mm and the cavity between the rod pipes is filled with ground resistance improvement powder, sealed with both end the outer pipe of electrode should be zinc coated, the electrode should burried directly in the ground by making boring of diameter 10" with boring machine highly conductive nonmagnetic and non-corrosive is to be connected with Gl strip 25 X 4 mm of 2 to 3 metre length to facilitate further connection to earth dolly and provision of earthing chamber in bricks wall size 45 x 45 x 15 cm an having PCC cover of required size and all as per IS 3034 (1981) complete all as directed Note: Gl strip to be measured and paid separately

Supply and fix galvanized earth strip 25 mm x 4 mm for earthing from earth plate to equipment complete all as specified and as directed

Re-routing/relaying of existing LT cable of any size PVC/XLPE insulated aluminium conductor armored with galvanised steel wire complete of any size and core from any position i.e ground /wall/poles/ culverts etc complete with protection cover, sand, pipe complete all as specified and directed by Engineer-in-charge Note:- (i) Old cable as obtained shall be re-used. (ii) Old serviceable protection cover, protection pipe and sand obtained under this item shall be reused if found serviceable. (iii) Earth work and any other new items shall be measured and paid separately under relevant items.

Material and labour for spray painting to outdoor type double door LT panels/feeder pillar box and replacement of door hinges, sliding bolts, cable entry MS sheets, cable glands, pedestal locks, bow handle and connected accessories where required by welding, cutting, drilling etc and including fixing with MS nuts and bolts and cleaning of panels from inside and outside and removing any faulty part of cable and preparing the cable for connection with suitable Aluminium lugs and insulating with proper colour code PVC tape where ever required and including two coats of spray painting by synthetic enameled paint complete all as specified and directed by Engineer-in-Charge. Note: 1) Proper shut down will be taken by the authorized representative only. 2) Panel should be made vermin proof and close properly after repair.

Material and labour for replacement of old unserviceable voltmeter/ Ammeter with Panel mounted multifunction three phase digital energy meter of accuracy Cl-1.0 for measuring Voltage, Current, KW, KVAR, KWH, KVAH and power factor and making the disturbed surface good by welding/riveting in MS sheet 1.6 mm thick on the hollow portion duly painted and calibrating the meter according to the CT all as specified and as directed at site. Make: Legrand cat no 414991 or equivalent in Schneider/Siemens/ABB

Material and labour for replacement of old unserviceable CT of LT Panel /Feeder pillar box with CT of ratio up to 200/5 Amps or as required at site according the load including connecting, disconnecting and testing complete all as directed at site.

Material and labour for replacement of old unserviceable indicators any type with LED based indicating lamps of RYB colour including disconnecting and connecting of the same all as directed at site. Make: Legrand/ABB/Siemens/L&T

Material and labour for fabrication of copper busbar including, bending cold or hot in any size and shape all as directed and including RYB insulation mounted on epoxy cast/polymer glass insulators all as directed by Engineer-in-charge

Material and labour for MCCB 250 Amps 4 pole 36 KA thermal adjustable type (Icu=Ics=100%) including accessories like spreaders, nut bolt etc etc suitable for 415 Volts, 3 Phase, 4 wire system adjustable thermal and magnetic setting including replacement of unserviceable one complete all as directed by Engineer-in-Charge

All as per Serial item No 156 but for MCCB 200 Amps 4 pole 36 KA thermal adjustable type.

All as per Serial item No 156 but for MCCB 160 Amps 4 pole 36 KA thermal adjustable type.

All as per Serial item No 156 but for MCCB 125 Amps 4 pole 25 KA thermal adjustable type.

All as per Serial item No 156 but for MCCB 100 Amps 4 pole 25 KA thermal adjustable type.

All as per Serial item No 156 but for MCCB 63 Amps 4 pole 25 KA thermal adjustable type.

Taking down MCCB with enclosure any type & any size.

Material & Labour for LT heat shrinkable, straight through type, suitable for XLPE Cable 1100 volts grade complete including disconnection and connection of LT cable to OH line of sizes 25 to 70 sqmm 3.5 core.

Material & Labour for Earthing complete with galvanized steel earth plate electrode 600mmx600mmx6 mm thick buried directly in ground earth (earth pit not less 2.25 metre deep below ground level) with top edge of the plate not less then1.5 metre below normal ground level connected to galvanised iron earthing strip 32mmx6mm thick by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No. 3 of MES SSR part-I 2010 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 metre length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of strata including PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site. Note: 1) Rate included for excavation & earth work in any type of strata as shown in electric plate no-3 in SSR Part-I. 2) Rate included for dismantling of old earth pit and removal from site.

Supply and fix galvanized earth strip 32 mm x 6 mm for earthing from earth plate to equipment complete all as specified and as directed.

Material and labour Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate for pedestal of poles/copping including necessary frame work, fair finishing to exposed surfaces using extra cement complete form, all as directed by Engineer In Charge

Material and labour for Cement concrete (1:3:6) type C -2 using 40 mm graded stone aggregate for foundation of pole /struts/mass concrete for stays, foundation and platform for transformer installation etc complete all as directed by Engineer In Charge.

Supply and fix in replacement of Aluminium lugs of size 16 Sqmm

All as per Serial item No 169 but for Aluminium lugs of size 25 Sqmm.

All as per Serial item No 169 but for Aluminium lugs of size 35 Sqmm.

All as per Serial item No 169 but for Aluminium lugs of size 50 Sqmm.

All as per Serial item No 169 but for Aluminium lugs of size 70 Sqmm.

All as per Serial item No 169 but for Aluminium lugs of size 95 Sqmm.

Taking down partly unserviceable/unserviceable,Security/street/Gate/Bollard light/Flood light fittings from pole/tower for necessary repair and make serviceable as per complaints given by dept through job card / complaint register on day today basis & all as specified and directed Engineer-in-Charge

Supply and fixing LED street light fitting 70Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

All as per Serial item No 176 but for LED street light fitting 45 Watt.

Supply and fixing in replacement of LED Driver suitable for 60/45/35 Watt LED Street Lights.

Supply and fixing in replacement of LED Driver suitable for 100/120/150Watt LED Flood Lights.

Supply and fixing in replacement of LED Driver suitable for 10/12 Watt LED Bollard Lights

Material and Labour for preparation of old painted surface and ZEBRA painting of PCC/steel poles 9/11 metre long along with road up to 1.5 metre height from pedestal, with two coats of enamel synthetic paints in 30 cm height including painting of pole coping with white paint complete all as directed by Engineer In Charge

Material & Labour for steel tubular pole/rail pole up to 9/11 metre long painting with two coats of enamel synthetic silver paints over a one coat of red oxide including painting of pole coping with white paint and zebra painting up to 1.5 metre from pole coping all as directed by Engineer-in-Charge

Material and Labour for preparation of old painted surface for steel structure, cross arms bracing supports, clamps, back plates of any type, section including nuts, bolts, washers, pipes mounted on PCC/steel poles 9/11 metre long along with road with two coats of enamel synthetic paints all as specified and directed by Engineer-in-Charge

Material and labour for writing pole number of minimum size 10 cm height with black paint over base of yellow paint on PCC/steel poles of LT/HT supply complete all as directed by Engineer In Charge

Material and labour for laying of 40 mm graded stone aggregate in layers not exceeding 15 cm thick including spreading, leveling all around the substation complete all as specified and directed.

Credit Amount shall be deducted to arrive the Contract Sum.

jkconstruction (BID ID -3471603)

Ruhi Construction (BID ID -3471546)

SHRIKALP ENGINEERS AND CONTRACTORS (BID ID -3471543)

Sri Krishna Construction (BID ID -3471973)

Ideal Infrastructure and Consultants (BID ID -3471727)

SHRI SAI ENTERPRISES (BID ID -3471948)