SPECIAL REPAIR OF FIRE HYDRANTS OF 222 ABOD AND PROVISION OF RAIN WATER HARVESTING FOR OTM ACCN 14 FAD UNDER GE NARANGI

Amount

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in, including spreading ,leveling watering and well ramming in layers n. exc. 25cm in soft/loose soil complete all as specified and as directed

Removing excavated materials n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point in soil complete all as specified and as directed.

Materials and labour for cutting raod / digging trench less tunnel for passing pipe of any size and making good the disturbed surfaces with PCC (1:2:4) type B2 using 20mm graded aggregate complete all as specified and as directed.

Taking up 100mm bore cast iron water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead, segregating and stacking properly at site complete all as specified and as directed.

Taking up 150mm bore cast iron water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead, segregating and stacking properly at site complete all as specified and as directed.

Taking up 200mm bore cast iron water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead, segregating and stacking properly at site complete all as specified and as directed.

Supply, laying and testing ductile iron pressure pipe socket and spigot end, class K-7, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for Push - on- joint with inside cement mortar lining, internal metallic zinc coationg and external black bitumen coating of size 100 mm dia duly ISI marked laid in trenches etc and making good distrubed surface as of existing road/pavement/ PCC surface complete all as specified and directed.

Supply, laying and testing ductile iron pressure pipe socket and spigot end, class K-9, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for Push - on- joint with inside cement mortar lining, internal metallic zinc coationg and external black bitumen coating of size 100 mm dia duly ISI marked laid in trenches etc and making good distrubed surface as of existing road/pavement/ PCC surface complete all as specified and directed.

Supply, laying and testing ductile iron pressure pipe socket and spigot end, class K-9, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for Push - on- joint with inside cement mortar lining, internal metallic zinc coationg and external black bitumen coating of size 150 mm dia duly ISI marked laid in trenches etc and making good distrubed surface as of existing road/pavement/ PCC surface complete all as specified and directed.

Supply, laying and testing ductile iron pressure pipe socket and spigot end, class K-9, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for Push - on- joint with inside cement mortar lining, internal metallic zinc coationg and external black bitumen coating of size 200 mm dia duly ISI marked laid in trenches etc and making good distrubed surface as of existing road/pavement/ PCC surface complete all as specified and directed.

Materials and labour for run lead joint for 200 mm bore spigot and socket pipes and fittings, testing including taking out old/defective /wornout joint complete all as specified and directed. Note:- Cost of excavation and earth work shall deemed to be included in the unit rate quoted.

Materials and labour for run lead joint for 150 mm bore spigot and socket pipes and fittings, testing including taking out old/defective /wornout joint complete all as specified and directed. Note:- Cost of excavation and earth work shall deemed to be included in the unit rate quoted.

Materials and labour for run lead joint for 100 mm bore spigot and socket pipes and fittings, testing including taking out old/defective /wornout joint complete all as specified and directed. Note:- Cost of excavation and earth work shall deemed to be included in the unit rate quoted.

Materials and labour for CI fittings for spigot and socket pipes/ flanged pipe of size upto 200 mm bore such as bends(any type,radius and angle) tapers any type (straight, bend, increasing,decreasing or double socket etc) Tee pieces single branch, 'Y' junction ,double branch, cross(all sockets or socket and spigot) collars caps and plugs complete all as specified and as directed.

Materials and labour for PCC type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete including dismantling of existing concrete complete all as specified and as directed.

Material and labour Mild steel studs nuts and bolts of any size and any length with suitable Mild Steel washer of any size for jointing of flange pipes/valve gland etc, complete all as specified and as directed.

Taking out 50mm bore (dia) galvanised iron water tubing from trenches/ wall with all fittings and accessories, segregating and stacking properly at site complete all as specified and as directed.

Supply and laying tubes 50mm bore (dia), medium grade, galvanised, with all fittings, laid in trenches, complete as all specified and as directed.

Supply and fixing cast iron flanged ends sluice valve suitable for 80mm bore pipes, conforming to IS-780, Class PN-1.6 with MS nuts, bolts, washers, etc, any pattern including taking out old unserviceable one and testing complete all as specified and as directed.

Supply and fixing cast iron flanged ends sluice valve suitable for 100mm bore pipes, conforming to IS-780, Class PN-1.6 with MS nuts, bolts, washers, etc, any pattern including taking out old unserviceable one and testing complete all as specified and as directed.

Supply and fixing cast iron flanged ends sluice valve suitable for 150mm bore pipes, conforming to IS-780, Class PN-1.6 with MS nuts, bolts, washers, etc, any pattern including taking out old unserviceable one and testing complete all as specified and as directed.

Supply and fixing cast iron flanged ends sluice valve suitable for 200mm bore pipes, conforming to IS-780, Class PN-1.6 with MS nuts, bolts, washers, etc, any pattern including taking out old unserviceable one and testing complete all as specified and as directed.

Supply and fixing cast iron non return valve 150 mm dia both side flanged (ISI Marked) confirming to IS 5312 (Pt-I) including nut and bolts washers, etc, any pattern including taking out old unserviceable one and testing complete all as specified and as directed.

Supply and fix fire hydrant landing valve type A (single head outlet) of 63 mm dia of size conforming to IS 5290 including taking out old unserviceable one and testing complete all as specified and as directed.

Supply and fix hose box made of 18 gauge MS Sheet 800mmx 600 mm x 250 mm with double door with 4 mm thick glass and door frame made of 16 gauge MS sheet for keeping 2 Nos hose pipe of length 15 mtr each, branch pipe, nozzle coupling etc and painted two coats of synthetic enamel paint of fire red colour out side and brilliant white colour inside complete all as specified and as directed.

Supply and fix 63mm dia gun metal branch pipe instantaneous inlet, made threaded outlet, 15mm bore nozzle short conforming IS-903 including taking out old unserviceable and testing complete all as specified and as directed.

Supply, fixing and commissioning of wall mounting swinging type first aid fire hose reel with drum, (IS:884-1995) hanging bracket, 30 mtr long and 20mm dia high pressure hose reel as per IS 444 with gunmetal shut off nozzle having 5mm dia orifice. The hose reel shall be conforming to IS-884-1985. Rae shall including for 25 mm dia MS pipe connection from riser to hose reel sockets, nipples, elbows and ball valve (25mm dia). Drum shall be fixed on adjoining wall through anchor fasteners/cement concrete book or Ms stand as per site reauirement and the rate of fixing/hanigng items in the rates quoted (for internal hydrant and one each an either side of stage) including taking out old unserviceable one and testing complete all as specified and as directed.

Supply and fix 63mm dia 15 mtr long controlled percolating rubberised fabric hose conforming to IS 8423 (Type 'A') incl gen metal male and female instantaneous coupling, bound and rivetted to hose pipe with 1.5mm dia copper wire complete in all respects, hose BSI marked, conforming to IS 636 type II and complete male female coupling conforming to IS 903 including taking out old unserviceable one and testing complete all as specified and as directed.

Supply and fix fire hydrant stand post 1.5 mtr high single head outlet gunmetal of 80mm dia with 63mm brigade hose of 63mm with couplings conforming to IS-903 (for external hydrant) complete all as specified and as directed.

Supply and fix fire brigade inlet connection 4 way in fire sump complete all as specified and as directed.

Supply and fix in replacement fire alarm sounders / Sirens electronic type horizontal two stage continous normal operation for atleast 50 minutes with sound level 65 db to 120 db Measured at 1.5m with sound output Variation of + 5 db 1500m range complete all as specified and as directed.

Supply and fix 200mm bore MS pipe, heavy duty, class "CMS" , 6mm thick, IS : 1239 (Part-1): 2004 with all necessary fitting like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc welding or screwed joints as required, fixed with standard clamps and structural steel supports as required at site including painting with two coats of synthetic enamel paint of post office red colour over a coat of red oxide primer including taking down and testing and commissioning complete all as specified and as directed.

Supply and fix 150mm bore MS pipe, heavy duty, class "CMS" , 6mm thick, IS : 1239 (Part-1): 2004 with all necessary fitting like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc welding or screwed joints as required, fixed with standard clamps and structural steel supports as required at site including painting with two coats of synthetic enamel paint of post office red colour over a coat of red oxide primer including taking down and testing and commissioning complete all as specified and as directed.

Supply and fix 100mm bore MS pipe, heavy duty, class "CMS" , 6mm thick, IS : 1239 (Part-1): 2004 with all necessary fitting like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc welding or screwed joints as required, fixed with standard clamps and structural steel supports as required at site including painting with two coats of synthetic enamel paint of post office red colour over a coat of red oxide primer including taking down and testing and commissioning complete all as specified and as directed.

Supply and fix 80mm bore MS pipe, heavy duty, class "CMS" , 6mm thick, IS : 1239 (Part-1): 2004 with all necessary fitting like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc welding or screwed joints as required, fixed with standard clamps and structural steel supports as required at site including painting with two coats of synthetic enamel paint of post office red colour over a coat of red oxide primer including taking down and testing and commissioning complete all as specified and as directed.

Supply and fix 25mm bore MS pipe, heavy duty, class "CMS" , 6mm thick, IS : 1239 (Part-1): 2004 with all necessary fitting like tees, elbows, flanges, reducers, gaskets, nuts and bolts etc welding or screwed joints as required, fixed with standard clamps and structural steel supports as required at site including painting with two coats of synthetic enamel paint of post office red colour over a coat of red oxide primer including taking down and testing and commissioning complete all as specified and as directed.

Supply and fix in repairs Gun-metal globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 50mm bore and IS : 778-84 Marked CL-1 Pressure tested 2.4 Mpa, testing complete all as specified and as directed.

Supply and fix in repairs Gun-metal globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore and IS : 778-84 Marked CL-1 Pressure tested 2.4 Mpa, testing complete all as specified and as directed.

Supply and fix in repairs Gun-metal globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 15mm bore and IS : 778-84 Marked CL-1 Pressure tested 2.4 Mpa, testing complete all as specified and as directed.

Supply and fix in repairs 150 mm dia flanged end basket with Foot valve conforming to IS 4038 ,stainer fabricated from 16 gauge brass sheet with 3 mm slots,made from MS bdy with bottom and top removable flanges with nuts,bolts etc complete including joints and jointing materials as per site requirement complete all as specified and as directed.

Materials and labour for galvanised steel pipe, 40mm bore, light grade including fittings as required for protection of Cable laying in trenches and/or fixing to Poles, Walls, etc. with MS Clamps, Nuts, Bolts, Washers etc., complete all as specified and as directed.

Supply and fix in repairs female coupling from fire hydrand and Supply and fix gun metal female coupling of fire hydrant of 65mm dia as per sample ISI marked suitable for fire hydrant fixed complete all as specified and as directed.

Materials and labour for reinforced cement concrete 1:2:4 type B1(20mm graded stone aggregate) in bases for column, thrust blocks for pipes,basement, slab for Pit chamber include MS handle, or roof slab for water tank etc complete all as specified and as directed.

Materials and labour for surface dressing n exc 15 cm deep Cutting of bushes / wild growth of any kinds and taking out root of wild growth by digging and making good surface including removing all unwanted material such as bushes branches, bushes roots , shrubs, brushwood, undergrowth roots and sweeping neat and clean arround outer area of sum well and sewage pump houses premises complete all as specified and as direceted.

Material and labour for cement concrete in 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in foundation filling and mass concrete including dismantling of existing concrete complete all as specified and as directed.

Materials and labour for rendering 10mm thick cement plaster in cement mortar 1:4 on fair faces of brick or concrete surfaces, water line support pillar include taking down old plaster complete all as specified and directed.

Taking out old UNSV MS Angle/ channel/ Sheet from Open well & Jack well sumps and supply & fabricated MS Covers from 50x50x6mm thck MS Angle Iron frame, MS sheet of size 3mm thick, MS rods, (Fe.290.Gde-E-165) include handle for lifting complete include painting with one coat of Red oxide paint and two coat of synthetic enamel paint as per existing size complete all as specified and directed. (Note : Job include cutting corroded structure by welding, fabrication of new structure by welding, cutting and fixing with suitable arrangements).

Construction of brick masonary valve pit of size 100x100x100cm, (internal dimension) one brick thick wall in cm 1:4 on 100mm thick PCC 1:4:8 type D2 as in foundation, and 10mm thick rendering internally, externally upto 15cm below GL providing valve pit cover made of 3mm thick MS sheet/plate, welded with 40x40x6mm angle iron frame alround including provision of hinges, handle and locking arrangement including 40x40x6mm angle iron frame fixed on top of valve pit by means hold fast 150mm long, embedded in PCC 1:2:4 type B1, block of size 230x200x100mm,including two coats of anti-corrosive paint over a coat of red oxide primer and necessary earth work in soft/loose soil complete all as specified and as directed.

Construction of brick masonary valve pit of size 90x90x90cm, (internal dimension) one brick thick wall in cm 1:4 on 100mm thick PCC 1:4:8 type D2 as in foundation, and 10mm thick rendering internally, externally upto 15cm below GL providing valve pit cover made of 3mm thick MS sheet/plate, welded with 40x40x6mm angle iron frame alround including provision of hinges, handle and locking arrangement including 40x40x6mm angle iron frame fixed on top of valve pit by means hold fast 150mm long, embedded in PCC 1:2:4 type B1, block of size 230x200x100mm,including two coats of anti-corrosive paint over a coat of red oxide primer and necessary earth work in soft/loose soil complete all as specified and as directed.

Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and as directed.

Materials and labour for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified

Supply, erection, testing and commissioning of Vertical Open well type Submersible pump, electric driven 415 V, TP suitable for 550 LPM at 16 Mtr head not less than 3 HP capacity complete all as specified and directed each set comprising of the following :- Make : Kirloskar KOS-318+ or equivalent make in KSB/CRI (a) 1 No.- Vertical Non Clog open well submersible type pump. (b) 1 No. - Suitable rating Submershible motor with class 'E' insulation 1500 RPM synchronous speed, operating on 415+ 10% volts, 3 phase, 50 Hz A.C. supply. (c) 1 Nos. -50 mm dia dial type pressure gauges. (d) 1 Lot- Mounting frame with fixing arrangement. (e) 1 Lot-PCC cement concrete foundation for the pump unit. (f) S & F Nesessary special CI fittings and all other fixtures to fix the pump-motor in existing site. (g) S & F suitable capacity DOL starter in metal cover complete include submersible wire of 1.5sqmm core of suitable length from starter to morter complete.

Materials and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 4 core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Supply and fix in repair/replacement MCB DB IP-43 of sheet metal enclosure double door 4 way with 200 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate.

Supply and fix in repair/replacement MCBs, TPN 20 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule)

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation ,filling and mass concrete complete all as specified and directed .

Material and labour for mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed

Material and labour for mild steel TMT bar of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed

Material and labour for form work to sides and soffit of floor or roof beam, beam haunchings, girders, bressummers lintels, cantilevers, shellves including supports, overhangings etc., also splays between floor and beam as in fair finished complete all as specified and directed.

Material and labour for RCC M-25 design Mix (using 20mm graded stone aggregate) as in foundation footings, foundation beam,plinth beams and bases of columns basement slabs, and mass complete all as specified and directed.

Material and labour for RCC M-25 design Mix (using 20mm graded stone aggregate) as in slabs supported on walls beam and colums in floors, roofs, landind, deck slabs and shelves complete all as specified and directed.

Material and labour for RCC M-25 design Mix (using 20mm graded stone aggregate) as as in columns pillers, piers, posts and struts complete all as specified and directed.

Use and waste formwork to sides of concrete foundations, footing ,bases of colums, plinth beams in rough finished flat surfaces of concrete and similar work complete all as specified and directed.

Material and labour for hard core with broken stone or boulder of gauge not exc 63 mm, deposited , spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed

Material and labour for 75 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate ) in floor without using extra cement finishing cement concrete surface even and smooth complete all as specified and as directed

Supply and fix framed brackets of angles or tees with web and flanges cut to shape, drilled & countersunk for screw, including bending & welding angles as necessary, gusket plates, riveting etc..n exc 10kg each brackets, conforming to Fe.290Gde-E-165(Brackets over 10kg each to be measured under 'structural steel') complete all as specified and as directed

Supply and fix plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections for use in sliding Iron doors usingFe 410 -W (GdeE- 250) qualityA complete all as specified and as directed

Supply and fix bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed

Material and labour brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified.

Material and labour for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces and finishing the surfaces even and smooth without using extra cement etc complete all as directed.

Material and labour for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified.

Supply and fix 1.00 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of Zinc coating 125 complete all as specified and directed.

Supply and fix 150 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix PVC (SWR) pipes 150mm dia single socketed, in any length with rubber ring joints, fixed to floor complete all as specified and as directed.

Supply and fix 150 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed.

Supply and fix 150 mm dia PVC (SWR) junction, single, (single T) equal or unequal provided with access door complete all as specified and directed.

Material and labour for concrete bed in cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) for drain pipes, 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Supply and fix rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

Material and labour for preparation of newly steel surface of any description over 10cm width or girth, not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer over complete all as specified and directed.

Supply and fix 20mm bore Gun-metal, globe or gate valves,with iron wheel head, crewed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix Gun-metal globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 50mm bore and IS : 778-84 Marked CL-1 Pressure tested 2.4 Mpa, testing complete all as specified and as directed.

PURBANCHAL BUILDERS (BID ID -3450869)

KAKWANI BUILDERS (BID ID -3450219)

Rana Kr Phookan (BID ID -3450982)

M/s DAS AND CO (BID ID -3450653)

S. R. TRADING (BID ID -3450796)