PROVIDING UPS PANEL AND ADDITIONAL PLUG POINTS ON UPS SUPPLY IN BLOCK G - PHASE I

(A) UPS work

Upgradation of existing 2 nos 30kVA stand alone UPS with Parallel redundancy synchronisation card and cables.

(B) Electrical & Data work

Supply installation, testing and commissioning of outgoing panel Single front, wall mounted ,indoor, all mccbs with rotary operating rotary handle, Construction: Structural members – 2.5mm , doors – 1.6mm CRCA, covers & partitions – 1.6mm CRCA, Gland Plates – 2mm CRCA, Gaskets: Soft EPDM rubber gaskets, completely derusted, chemically treated in 7 tank process Painting/ Powder coating in RAL 7032 Siemens Grey, 500A TPN thermal magnetic 36KA MCCB Cable Entry – Incomer 3nos of 4cx50sqmm YWY & Outgoing 4nos of 4cx50YWYsqmm:, Degree of Protection – IP52, Applicable Standard: IS:8623-1994, Insulation Volts: 660V, 50-60Hz, System Volts: 415V, 50Hz, 3-phase, 4-wire, Ambient Temperature: 40oC, Relative Humidity: 90%

Extension box panel on the existing Lighting panel as above

Supply installation, testing and commissioning of panel for UPS Single front, floor/wall mounted ,fully compartmentalized, with separate chambers for power, cables and busbars, indoor, all mccbs with rotary handle, Construction: Structural members – 2.5mm , doors – 1.6mm CRCA, covers & partitions – 1.6mm CRCA, base frame –75x75x5mm CRCA, Component Mounting Plates – 2mm CRCA, Gland Plates – 2mm CRCA, Gaskets: Soft EPDM rubber gaskets, completely derusted, chemically treated in 7 tank process Painting/ Powder coating in RAL 7032 Siemens Grey. Degree of Protection – IP52, Applicable Standard: IS:8623-1994, Insulation Volts: 660V, 50-60Hz, System Volts: 415V, 50Hz, 3-phase, 4-wire, Ambient Temperature: 40oC, Relative Humidity: 90%

Section 1 with

Incomer 500A Thermal Magnetic 36KA MCCB with rotary handles suitable for 4nos of 95sqmm YWY incomer with RYB lamp set and digital MF meter

1200A 4P 50KA Busbar

outgoing 7 sets 100A thermal magnetic based 4P MCCB with rotary handles with outgoings for each 2nos of 4cx25sqmm YWY cable

Section 2 with

With incomer 500A TPN MCCB 36 KA suitable for incomer 7nos of 4cx25sqmm YWY cables

800A 4P 50KA bus bar

Outgoing 20 sets of 60 A TPN MCCB each suitable for 4cx10sqmmYWY cable.

UPS Panel as above

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required.

(b) Cat B

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required.

(b) Cat B

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit (medium)of appropriate size as required.

(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20 mm conduit)

(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20 mm conduit)

Supplying and fixing following way TPN sheet steel, double door, Vertical type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphatized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required)

(d) 4 way (8+12), double door, Vertical type, Cat B

(e) 8 way (8+24), double door, Vertical type, Cat B

(f) 12 way (8+36), double door, Vertical type, Cat B

Supplying and fixing B series SP MCB 240V, suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required"

(c )5A TO 32A, Cat B

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.

(f) SP, Cat B

Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.

(J) TPN Cat B

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

4 Core 10 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.

(4) 4 x 10 Sq. mm.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 50 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 95 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.

100mm width x 50mm depth

200mm width x 50mm depth

300mm width x 50mm depth

Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.

100mm width x 50mm depth (16 SWG)

200mm width x 50mm depth (16 SWG)

300mm width x 50mm depth (16 SWG)

Supplying and fixing Cat 6, keystone jack RJ-45 information outlet compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 (ethernet) as per specification no. WG-NAS/KJ

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NA

Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing 1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-D in position as per specification No. WG-COC/PC

Supplying and fixing of following sizes of rigid PVC conduit along with accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required

Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required.

Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch one way 16/20 A on provided plate and box with wiring connections complete with neon indicator.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module complete.

Supplying and erecting slotted angles, frames, strips, etc. for fixing of trays complete with bending, cutting, drilling and welding complete erected at the position with necessary materials such as nut bolts,etc duly painted with one coat of red oxide and two coats of enamel paint to match the structures or as per directions

Please Enable Macros to View BoQ information