Rehabilitation of Kazhuthaivetti Drain in Bhuvanagiri Taluk of Cuddalore District.

Amount

Earthwork excavation for foundation in all kinds of soils and sub soils exept hard rock requiring blasting but including all other incidental charges such as, shoring, strutting, baling out water, refilling the sides of foundation with excavaled earth and depositing the surplus earth as directed by the departmental officer. (Open Exacavation)

Supplying and filling with clean river sand in layers of not more than 15 cm thick, well watered, rammed and consolidated etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and spreading sand gravel mix ratio of 30 : 70 for 10 cm thick where places required at site of work including watering and consolidation using power roller, etc, complete complying with standard specifications and as directed by the departmental officers

Earth work deploying earth moving machinery for desilting channel and forming bund on either side and depositing the earth on banks including jungle clearance etc complete complying with standrad specificaations and as directed by the departmental officers Having width 3m to 10m

Supplying and spreading of gravel including stacking the same for premeasurements and watering consolidation, ramming etc., complete complying with standard specifications and as directed by the departmental Officers.

Providing and placing in position of Plain cement concrete M 10 grade using M. Sand & hard blue granite broken stone jelly of 40mm size mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers.

Providing and placing in position of plain cement concrete M 15 using M. Sand hard blue granite broken stone jelly of size 20 mm mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

Below G.L upto 1.50m depth

Above Ground Level Upto 4.50M Height

Providing and placing in position of plain cement concrete M 20 using M. sand hard blue granite broken stone jelly of size 20 mm mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

Below G.L upto 1.50m depth

Below Ground Level upto 1.50 m to 4.50m Depth

Providing and placing in position of plain cement concrete M 20 grade using M. Sand graded hard blue granite broken stone jelly of 60% of 40 mm size and 40% of 20 mm size mixing with mixer machine and laying in layers oincluding the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

Below G.L upto 1.50m depth

Above Ground Level Upto 4.50M Height

Providing and placing in position of Reinforced Cement Concrete M 20 using M.sand hard blue granite broken stone jelly of 20 mm size mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick excluding form works, centring, shuttering and steel fabrications compacting, consolidation by using vibrators, finishing, watering, curing, etc complete complying with standard specifications and as directed by the departmental officers

Below Ground level upto 1.5 m depth

Below Ground Level upto 1.50 m to 4.50m Depth

Above Ground Level Upto 4.50M Height

Supplying and laying of ready mix for M 25 grade of concrete having charaterstic strength not less than specified in the IS 456 - 2000 using Ordinary portland cement with minimum cement content of 300 Kg / cum confirming to IS 8112. Coarse aggregates having a specific gravity of 2.60 using 20 mm down graded hard blue granite broken stone jelly and fine aggregate without flyash as per IS 383 - 1970 ( 2007 ) with suitable water cement ratio not less than 0.45 and not exceeding 0.50 of water quality confirming to IS 456 - 2000 including use of plasticizer of approved make & dosage of required grade at all locations and levels with specified high workability as per IS 1199 - 1959 ( 2004 ). The initial & final setting time confirming IS 12269 - 1987 ( 2004 ) with maximum temperature of concrete at the time of placing should not exceed 32 0 C. The admixtures affecting the quality and strength of the concrete should not be used and should confirm IS 9103 - 1979 [ usual admixture - Air entraining & water reducing ]. ges as per IS 456 - 2000, 4031 - ( Part 3 & 6 ) / 1988 ( 2005 ) & ( Part 2 ) / 1999 ( 2004 ) and 516 / 1959 ( 2004 ), 4926 - 1976 ( 1990 ), mix design details to be got approved before commencement of the work adopting pour card system and other OK cards. Excluding the cost of form works, centering and shuttering placed in position etc, complete complying with standard specifications and as directed by the departmental officers. (RCC work)

Supplying and erecting centering for vertical plain / RCC concrete walls of supply channel, retaining wall etc for following height height with necessary supports, all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 7.50 cm x 5.0 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, etc., complete complying with standard specifications and as directed by the departmental officers

i) For 0 to 0.90M Height

ii) For 0 to 1.80M Height

iii) For 0M to 2.70M / 3.00M Height

iv) For 3.00M to 4.00M Height

Supplying, fabricating and placing in position of Mild Steel or Ribbed Tor Steel for all RCC works as per design & drawing given including cost of steel, binding wire and labour charges for cutting, bending, laying in position and tying with binding wire, etc. complete complying with standard specifications and as directed by the departmental officers

Supplying and laying with graded hard blue granite broken stone jelly of varying of size from 80 mm, 63 mm, 50 mm, 40 mm, 25 mm, 20 mm, 12 mm and 10 mm in equal proportions for formation of filter drains and filter bed as shown in drawing etc complete complying with standard specifications and as directed by the departmental officers

Gravel backing for revetment in layers not exceeding 15 Cm thick including stacking for premeasurement, watering, consolidation and trimming the top surface so as to receive the rough stones, etc complete complying with standard specifications and as directed by the departmental officers

Providing launching apron using new jeddy stone of size not less than 300 mm thick and weight not less than 40 Kg including the cost of new wedges for filling the gaps, finishing etc complete complying with standard specifications and as directed by the departmental officers

Supplying and placing in position of plain cement concrete blocks of size 1.50x1.50x0.90m of M 20 grade concrete using hard blue granite broken stone jelly of size 20 mm mixing with mixer machine and laying in rows including dewatering wherever necessary, compacting, consolidation by using vibrators, finishing, watering, curing including the cost of erecting and centering including necessary support for plain surfaceses for concrete block of size 1.50 m X 1.50 m X 0.90 m using MS sheets of size 1.50 m X 0.90 m of 10 gauge stiffened with MS angle of size ISS 25 mm X 25 mm X 3 mm supported by MS flats of size 25 mm X 3 mm, conveyance to site with all labour charges etc. complete complying with standard specifications and as directed by the departmental officers

Hire charges for dewatering with 5.00 HP diesel driven pump with 6'' dia suction and delivery pipe (diesel engine with 1500 RMP) inclusive of cost of fuel,maintenance and operator wages etc., complete. (No.transport and fixing charge will be paid for pump).

Providing and placing in position of wheep holes for retaining wall using 110 mm dia (6kg / Cm2) PVC pipe heavy duty (PVC Finolex) including cost of all metrails, labour charges etc complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing in position of demarcation R.C.C. pre cast post in Cement concrete of grade M 15 with well graded aggregates and the nominal maximum size of coarse aggregate of size 20 mm of size 0.20 x 0.20 x 1.45 M and 0.45 x 0.20 x 0.30 m base fixing the post 30 Cm depth below ground level, the post includes using 4 numbers of 10 mm RTS main rod to a length of 1.33 M, using 8 mm MS @ 15 cm spacing as strips with steel centering and painting the post with enamel paint allround the post etc. complete and conveying the post to the site of demarcation boundary such as canal bund/water spread area etc including earth work excavation for foundation (45x45x45cm) in HSC having the base plain cement concrete of 15 cm of grade M 7.5 with well graded aggregates and the nominal maximum size of coarse aggregate of 40 mm of 10 cm thick, and the post embedded by using Cement concrete of grade M10 with well graded aggregates and the nominal maximum size of coarse aggregate of 20 mm of 30cm thick as per the drawing enclosed including cost of earth work, concrete, moulding charges, steel reinforcement, finishing, painting them and marking at top of post, etc .complete complying with standard specifications and as directed by the departmental officers

Fabricating, supplying and erection of Screw Gearing Steel Shutters of Size above 2.70 m x 1.20m width consist of Skin plate made out of 8 mm thick Mild Steel plate and horizontally stiffened with 150 x7 5 mm RSJ at an interval not more than 0.50 m and vertical stiffeners made out of 100 x 50 mm MS channel at an interval not more than 0.60m and provided with 10 mm thick Mild Steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipments. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipments. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red oxide primer. The rate including cost of materials, consumables, labours, power charges, conveyance charges, charges for all equipments required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty 5years etc., complete.

Fabricating, supplying and fixing of 80 mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod, conveying and stacking at section store. The Screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and warranty 5years etc., complete.

Fabricating, Supplying and fixing of Top Beam made up of 200 x100mm (ISMB 200) duly drilled to suit the Head set Assembly with required bed bolt made out of 25 mm Mild Steel Round rod duly threaded with suitable anchorage arrangements to a height of 0.60m with necessary Fish plate made out of 16mm Mild Steel Plate of size 0.20 x 0.30m 2 nos. with required holes. Conveying and leading the top beam arrangements to the worksite. Fixing the top beam arrangements at the top of the vent to correct position including dismantling the existing eroded top beam, conveying and stacking at the section store. The top beam should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, cost of petty civil works conveyance charges for labours and materials and warranty 5years including all other taxes etc., complete.

Fabricating supplying and fixing of shutter Groove Angle made up of 100 x 100 x 10mm Mild Steel angle for required height including welding hold fast of size 40 x 40 x 6mm Mild steel angle 3Nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The Groove angle should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours, charges for all fabricating and hoisting equipments, conveyance, petty civil works and warranty 5years etc., complete.

Fabricating, Supplying and fixing of Horn Type Head Set Assembly heavy duty (approximate 150 Kg) consist of the bottom and top portions made up of cast iron including moulding, machining and the hexagonal nut made up of gunmetal threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the work site. Fixing the head set assembly to the top beam by using required bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at section store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for wooden pattern, moulding and charges for all machining equipments, conveyance charges for labours and materials and warranty 5years etc., complete.

GST 18% IN FIGURES