REPAIR OF CHARPOY AND CERTAIN WOODEN ITEMS UNDER GE DIPATOLI

Amount

Charpoy GI pipe (FD-220) S & F following components of Charpoy GI pipe including dismantling unservicable one, complete all as specified and as directed. (a) Long rail made of 32 mm dia GI Tubing medium grade ISI mark 1.88 mtr long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy. (Make : Jindal/Bansal/Tata)

3 way 32 mm dia GI elbow ISI mark, complete all as specified and as directed.

Check nuts of 32 mm dia , complete all as specified and as directed.

Conversion of 32 mm dia long rail obtained from item No 1 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow, complete all as specified and as directed.

Conversion of 32 mm dia short rail obtained from item No 4 above into two numbers leg including fixing to 3 way 32 mm dia after one end threaded, complete all as specified and as directed.

Removing old unserviceable/rusted MS Plate and S/F new MS Plate of size 900mmx40mm x 5mm duly painted with black colour after applying red oxide after making two Nos hole, complete all as specified and as directed.

M & L for removing old U/S plywood and S/F New 12 mm BWR phenol bonded commercial plywood of size 2020 mm x 900 mm including fixing of plywood with new 12 Nos Nut and bolts (with cuck nut) (bolt size 75mmx6). Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per drg before fixing the ply top, complete all as specified and as directed.

M & L for removing old Nylon Newar and S/F New 12 mm BWR phenol bonded commercial plywood of size 2020 mm x 900 mm including providing 900mmx40mm x 5mm MS plate two Nos(duly painted with black colour after applying red oxide) for support with 12 Nos heavy duty Nut and bolts( with cuck nut)(bolt size 75mmx6).Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per drg before fixing the ply top, complete all as specified and as directed.

Chair School with hand board(FD/E6/MAP/05) Supply and fixing legs with arm of right side of chair school with hand board which is made out with 25mm round pipe wall thickness 1.6mm as shown in drg.

Supply and fixing legs with arm of left side of chair school with hand board which is made out with 25mm round pipe wall thickness 1.6mm and front of arm should be 20mm dia as shown in drg.

Supply and fixing stiffener of chair school with hand board is made out 25mm round pipe wall thickness 1.6mm as shown on drg.

Supply and fixing wire tray of chair school with hand board as shown on drg.

Removing old U/s PVC shell and S & F New PVC Shell, complete all as specified and as directed.

Removing old U/s Hand rest and S & F New hand rest made Up of 18mm thick pre-laminated MDF board exterior quality of teak line shade including provision of 4mm thick teakwood beading all around and screwed to 25mm dia hollow steel pipe with flat patti as shown on drg.

Preparation of the old painted steel surfaces by scraping with emery paper and joined welding as required, cleaning and applying one coat of synthetic enamel paint of black shade of approved quality.

PVC shoe , complete all as specified and as directed.

Table 600 x600 mm Wdn S&F new components of 1st class HW (Teak/shisham) including dismantling unservicable one all as specified and as directed. Leg, complete all as specified and as directed.

Front/Side rail , complete all as specified and as directed.

Top18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

M/S NEHAL ENTERPRISES

Y P ANAND