NIT No. 12/EE(EM)M-10/(22-23)Item No-1

Capacitive type water level indicator: - - Digital display through capacitive type water level indicator, water level indicator should be suitable for clear water tank, with the capability to observe the water depth in meter/feet as per the requirement up to 10-meter depth. This system should operate on 220v AC.Power supply of the digital water level indicator should be 24 VDC ±10%,Type: 2/3/4 Wire, Beam Angle (α): 12°/ 14°/ 5°, Applied Material: PC/IP65 housing, Ingress Protection against short circuit, Process Temperature: -10° C TO 60° C, Ambient Temperature: -10° C TO 55° C, Operating Pressure: Atmospheric, Accuracy: ± (0.2% Of measured distance +0.05% of range),Resolution (depend on distance): 1mm to 10mm, Output: Analog: 4-20mA, Top mounted.LCD Display, controller having 2 relay 4 outputs, contact rating 230V AC, 7amp., configurable as control outputs on separate set Points, with pre-defined logic with 7 segments LED, supported by 4 key tack-tile keyboards, Input will be 4-20 mA linear with resolution. Supply 230V AC 50Hz & output 12-30VDC 120 mA. Supply of Enclosure and frame of SS to hang the sensor, all the accessories fitted should be in powder coated paint CRC sheet cabinet, Supply of 3 core shielded copper wire 1.5 sq. mm (as per site requirement). Khel Gaon (2 Nos UGR) C-7 SDA BPS (1 No UGR) C-3 SDA BPS (1 No UGR) Make: NEUMANN/SKOPE/ Any DJB Approved make.

Including all the charges of installation, testing & Commissioning of the above system like laying cables, civil work etc. and any other work required as per the site engineer.

DEEPAK ENTERPRISES