REPAIR TO SEWAGE LINES, MAN HOLE COVERS, DRAINS, REPAIR TO PATHS, CLEANING OF SEWAGE LINES, REPAIR TO BOUNDARY WALL AND OTHER ALLIED WORKS FOR CAMS AND DGIS UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10

Amount

M&L for cleaning of all blockages of Nahni traps/floor traps/bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150 mm to 250 mm internal dia by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge to maintain internal & external sewage system in functional state at all the time by engaging/deploying adequate Safaiwala for CAMA and DGIS from 0900 hours to 1700 hours at Complaint cell (AGE B/R-I) mentioned in the contract on daily basis, with manual/pressure cleaning pump and flexible rods and other necessary equipments (as per rules of public health), including digging required nos of pits for depositing sludge and furthure capping the pit with the 25 cm thick layer of soil complete all as specified and as directed.

Notes:- 1 The Nos of person indicated in above items as assumed by the department, shall remain present at the complaint cell of AGE B/R-I (south). Contractor may have to deploy more manpower in the particular area and deploy adequate sewage cleaning machinary/ equipments to clean the line and open blockages. Rates quoted shall be deemed to have considered all such contingencies. 2. In case of non availability/ absence of any of minimum required tradesmen, the recovery for the same shall be effected at double the minimum fair wages applicable for the relevant category or double the market rates whichever is higher, in addition to non payment of this item for the absence period proportionaly. 3. If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide adequate Safaiwala. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill.

Demolition of brick work/stone boulder measonary built in cement mortar or cement lime mortar of any description and in any position complete all as specified and as directed.

M&L for brick work using old size bricks of class designation 10, built in cement mortar (1:4), straight or curved on plan, exc 6 metre mean radius complete all as specified and as directed.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc. on walls and ceiling complete all as specified and as directed.

M&L for 15mm thick cement plaster cement mortar (1:4) on fair faces of briick or concrete surfaces, finished fair & even without using extra cement complete all as specified and as directed.

M&L for applying two coats of cement base paint, white or tinted on old wall plastered surface including preparation of surface complete all as specified and as directed.

Excavation in trenches in soft/loose soil n.exc 1.5m wide & n.exc 1.5m in depth as in foundation, mainholes etc.n exc 10 sqm on plan and n.exc 1.5m in depth and getting out complete all as specified and as directed.

Demolition and breaking up drain pipes 150 mm bore (salt glazed stoneware/ACC/RCC), set in cement mortar, including removal of waste material upto 500 metre distance at the place notified by the Engineer-in Charge of following sizes of pipe:-

M&L for salt glazed stoneware drain pipes 150 mm bore, laid in trenches and jointed in cement mortar (1:4) and tested complete all as specified.

M&L for plain cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate as in bed to drain pipes 150 mm bore including packing under and haunching against sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for salt glazed stoneware drain pipes 200 mm bore, laid in trenches and jointed in cement mortar (1:4) and tested complete all as specified and as directed.

M&L for plain cement concrete 1:3:6, type C-2, using 40mm graded stone aggregate as in bed to drain pipes 200 mm bore including packing under and haunching against sides of pipes after they are laid and tested complete all as specified and as directed.

Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25cm thick, in soft/loose soil complete all as specified and as directed.

Removal of excavated surplus soil to a distance n.exc 50 metre at a level n.exc 1.5m above or below the starting point complete all as specified and as directed.

S&F in repairs SFRC manhole cover size (1200 X 600 x 70mm) thick, set in cement mortar 1:4 complete all as specified and as directed. Make of SFRC Manhole/drain cover and frame :- (a) M/s PS Concrete. (b) M/s KK Manhole. (c) M/s BRHL concrete industries.

Desilting/desludging/cleaning of drains (covered/uncovered) of average width in between 30 cm to 1.00 m and depth n.exc 1.5 m, removing all blockage from drains such as plastic pieces, soil etc and removing the materials out side of cantonemet area complete all as specified and as directed.

M&L in repairs salt glazed stone ware gully trap, square or round mouthed,150mm x 150mm size, shape as required,including dismantling and taking out of old GT and jointing with old connection and pipes complete all as specified and as directed.

Extra for forming fair furnished drain or channels 30 cm inner girth in cement concrete using cement including forming moulds,mitred/stopped ends etc. complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B-1 using 20mm graded stone aggregate as in coping, benching rounded or chamferred on edges includind use and waste of form work complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc. complete all as specified and as directed.

M&L for cement concrete 1:3:6, type C-1 using 20mm graded stone aggregate for plinth protection etc. complete all as specified and as directed.

M&L for Rubber moulded colour glosy finish Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes in floors, path/hard standing etc. with grey cement and pigment (Coloured Tiles) complete all as specified and as directed.

M&L for Glossy finished pre-polished coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade over and including 50mm thick sand cushioning with grey cement and pigments complete all as specified and as directed.

Providing precast cement concrete 1:2:4 solid building blocks or slabs exc. 10cm thick Type B-1, using 20mm graded stone aggregates (with plain or interlocking joints as directed) as, in walls with using CM 1:4 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparation of old painted Steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint of approved shade/tint complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in soft/loose soil complete all as specified and as directed.

M&L for PCC 1:2:4, Type B-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F rolled mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc, flat iron fillets (for escuring wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to GDE Fe 290 grade E-165 complete all as specified and as directed.

Dismantling post or struts (Wood, Steel or RCC) any section including taking out embeded in natural ground and making good the disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

S&F 5-10mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed.

S&F Mild steel round bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hopping for colours hooking ends and binding with a including security bolts post and struts in fencing including cutting top to shape Fe 290 (Gde -E-165) as directed drilling holes notching for wire etc. complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, strainig bolts, etc. including provision of binding wire complete all as specified and as directed.

M&L for Cleaning of sewage lines of 150mm to 300mm bore including manholes by super sucker machine with water jet pressure, the sucked wastage material will be collected in tanker and disposed off out of MoD land. All T&P will be provided by contractor including water for pressure to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole complete all as specified and as directed. Note : A pucca bound register shall be maintained at site showing the date and type of machine brought by the contractor with machine number, licence number etc and the total hours deployed at site. These details shall be got signed by JE/Engr-in-Charge and contractor which may be asked while claiming the payment of work done.

S&F in repairs galvanised, 2strand, stell barbed wire, 2.24mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails starining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and as directed.

Retraining resecuring including making good staple etc. galvanised, 2strand, stell barbed wire, 2.24mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails starining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

A N BUILDERS

M/S.M.S.Devi.Const.Co

Vijeta Solutions

VED PRAKASH ARORA

P R Constructions

DEV CONSTRUCTION

tomar and associates

Bidder Name

A N BUILDERS