PETTY REPAIR FOR DAY TO DAY SERVICES AND OTHER CONNECTED WKS IN DEPOT AND ADM AREA AT 15 FAD JINDRAH UNDER GE ARMY DHAR ROAD

Amount

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed by Engr-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

Checking of floor, plinth, plaster etc requiring masonry work and carrying out minor repairs such as edges, patches etc, including petty repairs material like sand, cement & aggregate to make it functional complete all as specified and directed by Engr-In-Charge. Note : Any items required to be replaced or major repair shall be paid under respective items.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and directed by Engr-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

Cleaning of sewage line upto first man holes blockage of WC, EWC, Bathroom, floor trap of WHB/Kitchen pipe etc complete all as specified and directed.

Cleaning of sludge from the manholes by taking out loose sediment sand,girt,ash,sludge water, rags ,fibres or vegetation from including removal of sludge/debris to a distance exc 250m but n exc 500m and buried under ground complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including racking out joints , hacking for key, scrubbing down with water, etc. max upto four storey and below including scaffloding complete all as specified and directed.

M & L rendering 15 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces finished fair and even (using water proofing compound) max upto four storey and below including scaffloding complete all as specified and directed. Note : WPC shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M & L for preparation of new plastered surface of walls, priming plastered and other surfaces with a coat of alkali resistant priming paint and applying two coats of cement base paint white or tinted complete all as specified and directed

M & L rendering 10 mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) including taking down plaster complete all as specified and directed.

M & L rendering 5 mm thick cement plaster 1:3 on fair faces of brick work or concrete ceiling surfaces finished even and smooth (without using extra lime or cement) including taking down plaster complete all as specified and directed.

M&L for preparing plastered new surface of wall and applying one coat of primer on plastered surfaces with alkali resistant priming paint and applying two coats with distemper oil emulsion, white or tinted incl applying 1 mm thick wall care putty complete all as specified and directed

M & L for preparation of new plasterd surface of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of 100% required shade (Company Depot tinted) in Camouflage pattern with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.50 litre/10 sqm over new surfaces complete upto max of four storey and below including scaffolding all as specified and directed

M&L for preparing new plastered and undecorated surface of ceiling and applying three coats of white washing complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S & F mild steel framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 but (except bricks) complete all as specified and directed.

75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair, complete all as specified and directed.

M&L for machine pressed gloosy finish cement concrete chequered tiles of size 300x300x25mm (coloured red/yellow), jointed and pointed in neat cement slurry with grey cement and pigments to match the colour of fills inclduing 20mm thick in CM 1:6 screed bed complete all as specified and directed.

M&L for 25mm thick sand filling under floors or in foundations including watering and consolidation as cushioning for laying of paver blocks complete all as specified and directed. Note :- Punned thickness of sand shall be measured and paid.

M & L for machine pressed precast concrete with grey cement and pigment interlocking paver block (coloured red/yellow) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.

S & F steel water tubes 15 mm bore (concealed), medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old water tubes complete all as specified and directed.

S & F steel water tubes 20 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) complete all as specified and directed.

M & L for joint free Non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layer of mortar 15 mm thick of cement plaster (1:6) complete all as specified & directed.

Glazed ceramic tile 450X350mm X 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layer of mortar 15 mm thick of cement plaster (1:6) complete all as specified & directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S & F pressed steel frames 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed.

S & F 35 mm thick factory made plain shutters second class hardwood rails and style, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick well seasoned second class hardwood glazed and skeleton shutter open rebated and prepared to receive glass/gauge without sash bars edge of framing plain chamfered or round, fitted with cut and mitred bends for securing glass gauge etc provided with styles and rails etc size of member of shutters with antifungal and antitermite preservation as per IS as specified in SSR part-I Sec-8 clause 8.24(a) fitted to chowkhats complete all as specified.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc including making good of existing jambs complete all as specified and directed

S&F powder coated (minimum thickness of powder coating 50 micron) aluminum sliding / side hung window, door and ventilator shutters, side hung type without sash bars, aluminum sections weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, powder coated aluminum fittings such as peg stays 150mm long (01 No) hinges type B 21 100mm long (02 Nos) suitable handle (1 No) etc complete all as specified and directed

S&F 3mm thick figured glass pin head type and glazing with oil putty in squares nexc 0.5sqm in each pane

S&F aluminum alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples

M & L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, including teak wood lipping 19 x 6mm thick fixed with nails complete all as specified and directed.

S&F 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixing to wooden frame complete all as specified and directed.

S&F 100mm long fancy type Brass handles, cast type, polished bright complete all as specified and directed.

S&F magnet catcher fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one priming coat of pink primer complete all as specified & directed.

S & F 150 mm aluminium handles, cast type, anodised complete all as specified and directed.

S & F 100 mm aluminium handles, cast type, anodised complete all as specified and directed.

S & F 200 mm aluminium anodised, barrel, tower bolts of extruded section fixed complete all as specified and directed.

S & F 100 mm aluminium anodised, barrel, tower bolts of extruded section fixed complete all as specified and directed.

S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S & F 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S & F 75 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S&F in repairs 3mm thick figured glass pin head type and glazing with oil putty in squares nexc 0.5sqm in each pane including hacking out old broken glass of any thickness complete all as specified and directed.

S & F in repairs 100 mm hasp and staples safety type, of aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified and directed

S & F in repairs 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S & F in repairs 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed.

S & F in repairs 150mm aluminium handles, cast type, anodised complete all as specified and as directed.

S & F in repairs 200mm long aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S & F in repairs sheet glass, 3 mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

S & F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed tinned tacks, or galvanised wire staples complete all as specified and directed.

Resecuring or easing & adjusting shutters of any description exc 1 sq. m and not exc 2 sq. m each, without taking down shutters complete all as specified and as directed.

Resecuring or easing & adjusting shutters of any description n exc 1 sq. m each, without taking down shutters complete all as specified and as directed.

S & F steel water tubes 15 mm bore (concealed), medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old water tubes complete all as specified and directed.

S & F steel water tubes 20 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets incl 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

M & L for 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repairs 15 mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S & F in repair Swan Neck, Left Hand Operating Knob Pillar Tap of 15mm bore dia, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repairs 15 mm brass chromium plate mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed

S & F in repairs wall mixer brass chromium plated hot and cold as specified and directed.

S & F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe). Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as direced.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed

S & F in repairs plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed

S & F in repair jet spray CP with flexible pipe complete all as specified and directed

S & F in repairs 10 litres flusing cistern and flushing pipe (exclusive of brackets), including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and including flush pipe of PVC 32 mm dia pipe 600 mm long complete all as specified and directed.

S & F in repairs stop valve, 15 mm bore dia cast copper alloy, fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified & directed.

S & F in repairs 15 mm bore dia fancy type, stop valves, chromium plated, cast copper alloy, screwed down, high pressure, with long shank and cup, crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed

S & F in repairs bib taps, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified & directed.

S/F in repair hand health faucet as specified and directed.

S & F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

S & F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, for iron pipe of size 15 mm bore complete all as specified and directed.

S & F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, for iron pipe of size 20mm bore complete all as specified and directed.

S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and directed

S&F in repair CP Soap dish 100mmx50mm complete all as speicified and directed

S & F in repairs 125 mm brass chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack of size not less than 24"x31"x10", 0.63mm thick with adequate shelves all as specified and directed

S & F in repairs sinks with drainage board made of stainless steel 1.0 mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S/F in repair fancy type cabinet mirror as specified and directed

S & F in repair shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and as directed.

M & L 75 mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repair Grating doom 100 mm dia of PTMT (Min weight 25 gms) complete all as specified and directed

Material & Labour for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old water tank complete, all as specified and as directed. Note : Water storage tank shall be White and screwed lid

Material & Labour for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old water tank complete, all as specified and as directed. Note : Water storage tank shall be White with screwed lid

S & F in repairs 20 mm ball brass stop valve, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc., including cleaning or refixing or removal to store complete all as specified and directed

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) bends of any radius, complete all as specified

S & F in repairs 75mm bore PVC (SWR) bends of any radius, complete all as specified

S&F Deco window zebra blinds for windows day and night blinds with aluminium cassette including all necessary fittings all as specified and directed./

Deduct Schedule of Credit of Rs. (-) 77810.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

MandeepConstructionCo (BID ID -3325445)

K S BUILDERS (BID ID -3311520)

SINGH CONST CO (BID ID -3309248)

M/S SHUBAM ENGINEERS (BID ID -3324908)