C/o Circuit House at Kalaktang, West Kameng District.

Amount

Basement, G+2 RCC framed structure building - 2022.98 Sqm

Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Providing and laying in foundations and plinth cement concrete 1 : 5 :10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 : 1.5 : 3) (1 cement :1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 : 1.5 : 3) (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).

d) Lintels, beams, girders, bressumers and cantilevers etc.

e) Column, pillars, posts and struts etc.

f) Stairs (excluding landings) except spiral stair cases.

Reinforcement of RCC work including bending, binding and placing in position complete. b) Cold twisted bars.

Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.

Extra for half brick masonry in superstructure above plinth level and up to floor two level.

Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete b) Size of Tile 600x600 mm

Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confiorming to IS : 15622 of approved make, in all colours and shades, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc.., complete. b) Size of Tile 600x600 mm

Supplying and fixing fully glazed shutters made out of best available hard wood for windows and clerestory windows using 7.50 Kg/Sq.m. 3 mm thick glass panes including applying one coat of approved wood primer. a) 35 mm thick including anodized aluminum butt hinges, with necessary screws.

12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Applying one coat of distemper primer of approved brand and manufacture on wall surface.

Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Providing two coats of acrylic based wall putty/ wall filler of Asian Paits/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the halp of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

Interior Walls : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Interior Walls : Finishing walls with water proofing cement paint of required shade : a) New work (Two or more coats applied @ 3.84 kg/10 sqm)

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.

Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws. a) 38mm thick best available local wood class - B I

Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).

Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. b) Ornamental grill.

Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. a) 300 x 16 mm

Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete.

Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.

Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.

Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.

Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.

Providing and fixing 40 mm dia GI Pipe outlet in cement mortar 1 : 3 (1 cement : 3 fine sand) including cutting and making good the wall.

Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 fine sand) including shuttering complete.

Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). a) 15 mm nominal bore

Providing and fixing brass bib cock of approved quality. a)15 mm nominal bore

Providing and fixing brass stop cock of approved quality. a) 15 mm nominal bore

Providing and fixing PVC connection pipe with brass union. A) 30 cm length a) 15 mm nominal bore

Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. a) Long Pan patten WC Pan

Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.

Providing and fixing a pair of white vitreous china foot rest of standard pattern for squatting pan WC. a) 250 x 130 x 30 mm

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required. a) One urinal basin with 5 Litres CI automatic flushing cistern

Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.

Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.

Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). a) 750 x 20 mm size

Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. a) 100 x 100 x 100 mm

Roofing - Shingles Profile Surface Treatment Color : Coated Features Tamper Proof, Corrosion Resistant, Durable Coating, Water Proof Size:As Per client need

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). Including Transportation and installation charge. a) Super Austenitic Stainless Steel Square Pipe Size: 40 x 40 x 3.0 mm, Wt.-3.76 kg/m

Providing and fixing stainless steel railing 0.75 m high with 7.5 x 5 cm top and bottom rails 7.5 x 5 cm sides and 5 cm x 5 cm intermediate vertical bars placed at 22.5 cm centre to centre.

Monastic painting and Budthist muneral design.

Painting (one or more coats) with superior exterior including cost of tradetional architectural painting work in different colours and tradetional feature works (in 4 Floor)

Budthist muneral design

Septic tank for 100 users

Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.

Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone shingle 20 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).

Centring and shuttering including strutting, propping etc and removal of form work for :

b) Walls including attached buttresses, pilasters etc.

c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).

Reinforcement of RCC work including bending, binding and placing in position complete. b) Cold twisted bars.

12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).

Neat cement punning.

Providing and fixing CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).

Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. a) 100 mm dia

Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. a) 100 x 100 x 100 mm

Plumbing line Inlet, Outlet & Vent pipe etc

Fire Hydrant System

Two way FB Connection Gun Metal

Hydrant Valve 63mm 1Psc (IS: 937) Stainless Steel

Short Branch pipe 63mm 1psc (IS: 903) Stainless Steel

RRL Hose 63mmx30mtr(1Psc) (IS: 636) Stainless Steel

Manual Swing Hose Reel Drum (IS: 844) with company fitted 30Mtr.

Hose Box (24"x24"x10") for 30 Mtr.

MS Pipe 4" Dia x 20"

MS Pipe 3" Dia x 20"

MS Pipe 6" Dia x 20"

MS 4" Band

MS 6" Band

Two way Flange

Flange 200

Gate Valve 4"

Foot Valve

Non Return Valve with Flange

Tap Putting

Installation, Fabrication & Fitting Charges

Interior & Miscellaneous Items

WOODEN FURNITURE

Types of Bed Sizes: Single Bed Size, Length: 72 to 78 inches (1.83m to 1.98m) Breadth:30, 36 or 42 inches (76.2 cm, 91.4 cm, 1.07 m) with10" mattresses.

Types of Bed Sizes: Double Bed Size Length:72 to 75 inches (1.83m to 1.91m) Breadth:48 inches (1.22 m) for VIP Suite with10" mattresses.

Types of Bed Sizes: Double Bed Size Length:72 to 75 inches (1.83m to 1.91m) Breadth:48 inches (1.22 m) with 10" mattresses.

Bed Side Table: Dimensions (In Centimetres) H 39.878 x W 39.878 x D 39.878

Coffee Table: Dimensions (In Centimetres) H 41.9 x W 80 x D 39.9

Modular 3+1 Seater Sofa Set: Dimensions (In Centimetres) 3 Seater : H 68.6 x W 203.2 x D 76.2; 1 Seater : H 68.6 x W 91.4 x D 76.2

Office Table 1.4 M in Melamine Finish Dimensions Length 55.1 x Width 25.5 x Height 29.5 Inches

Wooden 2 Door Cabinet Brand The Attic Colour Honey Material Wood Product Dimensions 35D x 78W x 118H Centimetres Special Feature Hinged Mounting Type Floor Mount Finish Type Lacquered

DeckUp Muvo Engineered Wood Book Shelf and Display Unit (Dark Wenge, Matte Finish , Set of 3 Shelves)Shelf Type Engineered Wood Product Dimensions 28D x 80W x 106H Centimetres Mounting Type Floor Mount Room Type Office, Living Room Material Wood

FUGO Ergonomic Brown Chair for Study & Office| Gaming Chairs Revolving Rolling Chair for Office Work at Home (Material-Faux Leather) Product Dimensions 44D x 69W x 69H Centimetres

Push Back Theatre Chair Material: Moulded PU foam of 48 to 52 density. Tubular stand structure of 25 x 50 x 1.6 mm thick Seat frame.

Rezzan Solid Wood 8 Seater Dining Set In Honey Oak Finish Dimensions (In Centimetres) H 88.9 x W 45.72 x D 45.72

Brown Wooden Office Conference Table, Seating Capacity: 30 People

Dressing table

Sony Bravio Colour TV 43''

Sony Bravio Colour TV 32''

Geyser

Room heater

Exhaust fan

Water Purifier Kent

Modular Kitchen

Sintex tank (2000 Ltr)

CPVC Pipe (20 mm)

Submersible Water pump 1.5 HP

LG 1.5 Ton 5 Star AI DUAL Inverter Split AC (Copper, Super Convertible 6-in-1 Cooling, HD Filter with Anti-Virus Protection, 2022 Model, PS-Q19YNZE, White)

Vguard AC stabilizer, Model no . : VGB500

Installation Charge@2000 per AC

ELECTRICAL ITEMS

62.5 KVA 3ph ( CPCB-III) SILENT DG set comprising Cummins engine model 4BTAA3.3-GII developing at 1500 RPM duly coupled with Stamford make 62.5 KVA/415V alternator mounted on a common MS Channel base frame including Manual control panel, Fuel Tank, Battery with leads and with Acoustic Enclosure.

Installation Charge

250kVA 3-Phase Oil Cooled Distribution Transformer Power Rating: 250kVA Number of Phase: 3-Phase Voltage Ratio: 11kV/433V Cooling Type: Oil Cooled Winding Material: Copper Standards: IS-1180

Installation Charge

Providing, supplying, installation and commissioning of passenger elevator etc. complete for 8 to 10 person.

IP CAMERA WITH NVR (FULL HD DIGITAL SYSTEM) FOR RESTAURANT

Dahua 32 Channel Network video Recorder (NVR),4 Sata (connect upto 4 nos.of HDD)

RJ-45 Connector

Surveillance Hard Disk Drive 4000GB (sata)

Net gear 16 Port Gigabit POE Switch

D-Link Floor Rack 27U with all Accessories

Misc items, (HDMI Cable ,Box ,HDMI over LAN converters over LAN converte

Installation Charge except electrical items

False Ceiling (Gypsum boards & PVC Ceiling Panel, For Office, Thickness: 7mm with LED strip lighting.

Retaining wall 6.00 Mtr height - 32.00 Mtr

Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaning earth locally for road work. i) Ordinary soil A. Manual means (Depth upto 3 m)

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M15

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification Granular material

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications

M/S KONCHO TAMPHEL (BID ID -7681)