REPAIR TO OTM/PROCESS BLDG WITH ASSOCIATED B/R WORKS AT HEMRL UNDER GE (I) RnD PASHAN

Amount

Dismantling of Wrought iron (or) mild steel work ,of any descriptionn not otherwise provided for complete all as specified and directed.

Dismantling Fencing wire mesh any type complete all as specified and directed.

Material and labour for MS angle posts, struts in fencing including cutting to shape as directed and drilling holes, notching for wire etc, flat iron fillets, bolts exc 5cm long etc including all necessary drilling, bolting, riveting, welding etc and similar work conforming to Fe 290 or grade E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, Complete all as specified and directed by Engineer-in-Charge.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Supply and fixing mild steel round bars for fixing chain link fencing, in required length bent to shape required, including cranking, bending spirally for hooping etc Fe-410-W Gde E-250 quality A Fe-290 (Gde E-165) 10mm dia complete all as specified and directed

Material and Labour for hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete all as specified and directed.

Material and labour for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graged aggregate as in plinth protection/hard standing path etc finishing the surface without using extra cement even and smooth complete all as specified and directed.

Material and labour for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' thickness of slab 75mm complete all as specified and directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for and removing the debris from site complete all as spcified and directed by Engineer-in-Charge.

Excavation in trenches; not exc 1.50 m depth & n. exc1.50m wide for foundation & getting out in any type of soil complete all as specified and directed.

Returning filling including spreading, leveling watering & Well ramming in layers n.exc 25 cm thick in soils complete all as specified and directed.

Removing excavated material in any type of soil exc 250m & not exc 500m and depositing where directed at a level n. exc 1.50m above starting point complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling & mass concrete complete all as specified and directed.

Demolition of brick work/stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks, complete all as specified and directed.

Material and labour for Precast cement concrete block masonry exceeding 10 cm in width with solid block of PCC(1:3:6) type C1 and setting in CM 1:6 complete all as specified and directed.

Dismantling stone slabs and tiles bedded and pointed in any type of mortar any thickness & any description complete all as specified and directed.

Material and labour for Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade laid over and including 50mm thick crushed sand cushioning complete all as specified and directed.

M&L for granite slab 20mm thick machine cut, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing as in urinal partition etc complete all as specified and directed.

Material and labour for Rounding to edges of Granite slab 20 mm thick on one edge, such as in , cills, cooking platform,etc and other similar situations complete all as specified and directed.

Material and labour for 40mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in flooring complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 18 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Material and labour for factory made precast chequered cement concrete tiles, size 30cmx30cmx22 to 25mm, hydraulically pressed, different colours, glossy finished, set jointed in neat cement slurry and pointed with white cement and coloured pigment to match the surface laid over and including 20mm thick screed bed, in CM (1:6) , complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and removing the rubbish off the premises complete all as specified and directed

Material and labour for 25mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in sub base flooring complete all as specified and directed.

Material and Labour for Glazed ceramic coloured tiles (450x300) x 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc. set and jointed in neat cement slury and pointed in coloured cement to match the colouring tile fixed over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Material and labour for Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15mm thick screed in CM 1:6 complete all as specified and directed.

Material an labour for double charge vitrified coloured Ceramic tiles dark shade 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified.

Material an labour for double charge Virified coloured Ceramic tiles dark shade 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:3 complete all as specified and directed

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as spcified and directed.

Supply and Fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings cladding fixed with self tapping screws complete all as specified and directed.

Supply and Fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as spcified and directed.

Material and labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Material and labour for walling of random rubble, brought upto course, well bonded, bedded and solidly hearted, built in CM (1:6) but except stone including removing mortar and cleaning the stone, stacking for measurement and removal and disposing of debris etc complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 20mm on Granite or Trap Stone complete all as specified and directed.

Material and labour for keyed pointing to random rubble, uncoursed or brought upto courses in CM 1:3 complete all as specified and directed.

Material and labour for PCC 1:3:6 type C1 using 20mm graded stone aggregate for coping including necessary form work complete all as specified and directed

Supply and fix framed work such as grills, gratings etc with ends of bars shouldered/rivetted or forged into spikes framed guard bars barred iron doors ladders framed balusters walkways, railing, framework for water tanks conforming to Fe-290 gd E165 complete all as specified and directed.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to FE 410-W(Gde -E-250) quality-A complete all as spcified and directed.

Material and Labour for Preparation of new steel surfaces exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and Labour for Preparation of new steel surfaces n exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down Chowkats or frames including shutters not exceeding 1.5 Sq.M each (Without taking off shutters from the frames). complete all as specified and directed

Taking down shutters of any description exceeding 1 Square Metre but not exceeding 2 Square Metre each complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-Charge.

M&L for Aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighting 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed Note : The rate for aluminium work is inclusive of filling the gaps between wall and aluminium structure with plaster/putty as per site conditions

Supply and Fix powder coated Aluminium sliding windows three track with two glass shutters using and including 4 mm thick glass tinted and one shutter with and including stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated section, Aluminium cleat, PVC track, bearing, handle lock rubber beading, etc complete all as specified and directed. Note Size of aluminum sections are as under :- (i) Three track top & vertical – Jindal main – 2010 Section No 20621 or equivalent section in other approved make. (ii) Three track bottom - Jindal main – 2010 Section No 20620 or equivalent section in other approved make. (iii) Shutter vertical section - Jindal main – 2010 Section No 20606 or equivalent section in other approved make. (iv) Shutter top & bottom - Jindal main – 2010 Section No 20604 or equivalent section in other approved make. (v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605 or equivalent section in other approved make.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, floor door spring, ruber neoprene packing,handles 2 Nos in each door, hinges, suitable handle anodised aluminum snap beading screws etc. complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

Material and labour for rough cast wired glass n exc 0.5 sqm, 6.4mm thick and glazing with oil putty in square complete all as specified and directed.

Supply and fix 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directed.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour for one coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed.

Taking down and refixing in same position shutters of any description exceeding 1 sqm but not exceeding 2sqm each including easing and repair works complete all as specified and directed.

Supply and fix factory made solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement.complete all as specified and directed

Supply and fix Mild steel flat iron as in hold fasts or similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed

Supply and Fix 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed.

Supply and Fix 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.

Supply and Fix 150 mm long aluminum anodized barrel tower bolts of extruded section complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for rendering 15mm thick in two layers on fair faces of brick work or concrete surfaces 10mm in CM 1:6 and top layer 5mm thick in CM 1:4 mixed with integral water proofing compound finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately)

Material and labour for rendering 10 mm thick in CM 1:6 on internal surfaces of brick wall finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 5 mm thick plastering in CM 1:3 on ceiling and finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed.

Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper over a coat of 1mm thick interior wall care putty and a coat of primer complete all as specified and directed

M&L for preparation of newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15486:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed.

M&L for preparation of old ceiling surfaces and applying one coat of oil bound distemper complete all as specified and directed

Material and labour for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for complete removal of existing treatment of Surfaces of any description wood, steel, iron, concrete, brick, stone, etc including preparation and applying of two coat of fire resistance paint over and including a coat of primer complete all as specified and directed.

Material and labour for welding in repairs thickness of metal exc 6mm but n exc 9mm, exc 2.5cm but n exc 5cm in length complete all as specified and directed.

Supply and Fix in repairs 20mm gun metal gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and Fix in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt 210 grams) complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store .complete all as specified and directed

Supply and Fix 15mm bore Tubes Medium grade galvanised with necessary fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

Fixing only steel tubes, of 15mm bore any grade to walls and ceilings or laying in floors with necessary fittings complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store .complete all as specified and directed

Fixing only GI tubes, of 20 mm bore any grade to walls and ceilings or laying in floors complete all as specified and directed.

Supply and Fix 20 mm bore Tubes Medium grade galvanised with necessary fittings and fixed complete to wall and ceiling or laid in floor with necessary fittings complete all as specified and directed.

Cutting chases, pinning in, making good to facings of block/slab/stone/brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10 cm grith complete all as specified and directed.

Taking down PVC water tanks exc 250 but not exc 500 ltrs capacity complete all as specified and directed.

All as per Srl Item No 82 above but exc 500 ltrs but not exc 1000 ltr capacity complete all as specified and directed.

Supply and Fix rotational moulded polythene water storage tank (Cylindrical vertical with closed top) triple layered hoisted and fixed in position 500 ltrs capacity including disonnecting and refixing the GI pipe and fittings complete all as specified and directed.

All as per Srl Item No 84 above but capacity of tank 1000 ltrs. complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 250 litre and n. exc 500 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified & as directed.

Disconnecting existing tanks of capacity exc.500 litre and n. exc 1000 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified & as directed.

Supply and Fix in repairs Vitreous China wash basin, white, flat back, size 580mm x 450mm including brackets, including cutting for and pinning in ends of brackets or erecting stand and including 32mm bore waste coupling of PTMT (half or full threaded) complete all as specified and directed.

Supply and fix in repair long body 15mm bore chromium plated Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams) complete all as specified and directed.

Supply and Fix in repair 15mm bore fancy type long(swan) neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 650 grams) complete all as specified and directed.

Supply and Fix in repair soap dish, stainless steel fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and Fix in repairs brass chromium plated tubular towel rail 20mm dia complete all as specified and directed.

Supply and Fix in repairs angular stop cock copper alloy, screwed down, high pressure, screwed both ends fancy type chromium plated for 15mm bore Min wt 400 grams complete all as specified and directed.

Supply and Fix in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed.

Supply and Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap complete all as specified and directed.

Supply and fix in repair, 10 litre capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed.

Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc. including all pipe fittings. complete all as specified and directed

Supply and fix in repair 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fix in repair 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 32 mm ,45gms, suitable for vitreous china wash basin complete all as specified and directed.

Supply and fix in repairs 1.2metre long chromium plated health faucet including holder fixed to wall. complete all as specified and directed

Supply and fix in repairs plastic water closet seat cover, white colour, soft closing type, with and including mild steel chromium plated or aluminium hinging device complete all as specified and directed.

M&L for 12mm thick particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed staples on snap grid including providing anodised aluminium snap grid frame work for false ceiling including Hangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed by Engr-in-Charge.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Demolition and breaking up drain PVC (SWR) pipes jointed in cement mortar/solvent, of any dia of pipe in any position with wall or in floor etc complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

Supply and fix 75 mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

Supply and fix 110 mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

Supply and fix 75 mm PVC (SWR) branch piece single (single Y) equal or unequal with access door complete all as specified and directed.

Supply and fix 110 mm PVC (SWR) branch piece single (single Y) equal or unequal.with access door complete all as specified and directed.

Supply and fix 75 mm PVC (SWR) junction single (T single) equal or unequal.with access door complete all as specified and directed.

Supply and fix 110 mm PVC (SWR) junction single (T single) equal or unequal with acess door complete all as specified and directed.

M/S NILESH BUILDERS (BID ID -3298784)

VIRENDRA FABRICATORS (BID ID -3299428)

S.K.HARAL (BID ID -3299591)

M/S.J.V.Datar (BID ID -3299842)

Sunil Constructions (BID ID -3299995)

Rays Breakers (BID ID -3299977)