WELCOME MAINTENANCE AND REPAIRS TO SANITARY FITTINGS PLUMBING FLOORING PLASTERING PLINTH PROTECTION AND CONNECTED WORKS IN ZONE A B AREA UNDER AGE B R N NO I OF GE NORTH SECUNDERABAD

Amount

M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M & L for preparing the old plastered or unplastered decorated surfaces of ceilings and applying one coat of white wash complete all as specified and as directed.

M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of old painted surfaces including brooming down or steel wire brushing scraping down smoke soot, moulds, moss: efflorescent salts and trading oil, greasy spots and applying one coat of oil bound distemper and including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish of any height etc complete all as specified and as directed.

All as per Sr item No.4 above, but on ceilings complete all as specified and as directed.

M&L for preparation of old painted surfaces including brooming down or steel wire brushing scraping down smoke soot, moulds, moss: efflorescent salts and trading oil, greasy spots and applying one coat of plastic emulsion(Royal shyne luxury emulsion) and including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish of any height etc complete all as specified and directed.

M&L for complete removal of existing treatment of old painted wall surfaces and applying 3.00 mm thick white cement based wall care putty smooth finish.etc of approved make & shade on walls and other places of up to any height complete all as specified and as directed.

M&L for applying one coat of priming with alkali resistant priming paint over the putty surface and approved make & shade on walls of up to any height etc, complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over the primer surface of approved make & shade on walls of up to any height etc, complete all as specified and as directed.

M&L for applying two coats of plastic emulsion (Royal shyne luxury emulsion) over the primer surface of approved make & shade on walls of up to any height etc., including preparation of old surfaces complete all as specified and as directed.

M & L for preparation of old painted wooden surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted steel and iron surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed.

Refixing in same opening of any description exc 1 sqm each but not exceeding 2 Sqm each complete all as specified and as directed.

M&L for Removing of existing old wooden doors & windows paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth and Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works, etc complete all as specified and as directed.

Material and labour for applying two coats of French polishing on old surfaces of any description, width or girth duly preparation and cleaning of the old surfaces complete all as specified and as directed.

Material and labour for applying one coat of French polishing on old surfaces of any description, width or girth duly preparation and cleaning of the old surfaces complete all as specified and as directed.

M & L for preparing old surfaces of wood and wood based material of any description and girth not otherwise described and treated with one coat of creosote oil complete all as specified and as directed.

Supply and fix stainless steel curtain rod of 25 mm bore fancy type complete all as specified and as directed.

Supply and fix in repairs for stainless steel curtain rod brackets (decorative type) suitable for curtain rod of 25 mm dia, complete all as specified and as directed.

Supply and fix in repairs 140 mm long double legged door stopper of aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as directed complete all as specified and as directed.

M&L in repairs 18mm thick Plywood grade BWR type BB, fixed with screws to frame work, fixed with screws to timber frame work complete all as specified and as directed.

M&L in repairs 12 mm thick Plywood grade BWR type BB, fixed with screws to frame work, fixed with screws to timber frame work complete all as specified and as directed.

M&L for Decorative laminate 0.9mm thick Type I of texture surface finish, colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.

S&F 200mm long stainless steel decorative handle fixed with screws complete all as specified and as directed.

S&F 200mm long stainless steel hinge for cabinets auto close concealed type complete all as specified and as directed.

S&F stainless steel telescopic type ball bearing drawer channel of any size complete all as specified and as directed.

S&F stainless steel kitchen basket of size 17"x20"x4" of size complete all as specified and as directed.

All as per item No.28 above but of size 17x"x20"x6"

All as item No.28 above but of size 17x"x20"x8

Supply and fix Stainless steel dust bin holder 10" dia complete all as specified and as directed.

Supply and fix stainless steel bottle pullout of size 106 mm X 476 mm X 130 mm complete all as specified and as directed.

M&L in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.

M&L in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.

S & F in repairs continuous (piano) hinges, mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws complete all as specified and as directed.

Supply and fix in repairs 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

M&L for IInd class hard wood plain fillets of sectional area exc 6 Sqcm & not exc 13 Sqcm area, square, rectangular or triangular in section, clean sawn, secured with nails or brads with bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and as directed.

M&L for IInd class hard wood plain fillets of sectional area exc 13Sqcm & not exc 25 Sqcm area square, rectangular or triangular in section, clean sawn, secured with nails or brads.with bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and as directed.

S&F 40mm dia, cupboard knobs brass, polished and fixed with nut, screw and washer of mild steel, bright finished etc complete all as specified and as directed.

Supply and fix in ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed with beads complete all as specified and as directed.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and complete all as specified and as directed.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Taking down cement plaster from brick/stone wall of any description etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and as directed

M & L for rendering 5 mm thick in cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 sqm each patch complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash on ceilings complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and wall putty etc complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for half brick thick walls with flyash old size bricks, straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in floor of paving not exceeding 15 centimetres thick below or above ground level complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection , at 3 metre interval and every change of direction duly filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials outside of MoD land complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 etc: complete all as specified and directed.

M&L for Rendering 10 mm thk in CM (1:4) as in backing coat of cement plaster for laying of wall tiles etc: complete all as specified and directed.

M&L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc complete all as specified and directed.

M&L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm in skirting / dado etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match etc., complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match etc., complete all as specified and directed.

S&F Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

M&L for Glazed (Coloured) ceramic tiles in vertical surfaces 300 x 450 x 8 to 9 mm/ 450 x 350 x 8 to 9 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20 to 25mm thick machine cut and machine polished cudapah stone slab for kitchen platform jointed and set in CM 1:3 and fixed including rounding to edge of stone slabs one side edge etc complete all as specified and as directed.

M&L for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over & including 10mm thick bedding/backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed.

Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Demolition of concrete in sunken floor incl removal of filling etc complete incl removal of demolished material to a distance complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair face of brickwork or concrete surfaces of sunken floors duly mixed with water proofing compound @ 2% by weight of cement or as per manufacturer's instructions in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant items in this schedule.

Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litre per SQM after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP polymeric membrane of weight 3 kilogram per SQM and minimum 3mm thick reinforced with polyster non oven fabric (weight not less than 150 gm/SQM) over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per SQM over that providing a sand layer of 25mm thick in sunken floors complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for plain cement concrete, type E2 (1:5:10) mix (using 40 mm graded stone aggregates) for filling in sunken floor and mass concrete complete all as specified and as directed.

Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends etc complete all as specified and directed

S&F UPVC/PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in ground shape etc complete all as specified and as directed.

S&F 75mm bore UPVC/PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints, complete fittings etc fixed to wall fixed with MS clamps 8mm dia with two nuts/wall nails etc complete all as specified and as directed.

S&F 110mm bore UPVC/PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints, complete fittings etc fixed to wall fixed with MS clamps 8mm dia with two nuts/wall nails etc complete all as specified and directed.

S&F 75mm bore UPVC/PVC (SWR) bends any radius diminishing pieces or tapers with access doors etc, complete all as specified and as directed.

S&F 110mm bore UPVC/PVC (SWR) bends any radius diminishing pieces or tapers with access doors etc, complete all as specified and as directed.

S&F 75mm bore UPVC/PVC (SWR) branch piece, single (single Y) equal or unequal with access doors etc, complete all as specified and as directed.

S&F 110 mm bore UPVC/PVC (SWR) junction single (single T) equal or unequal with access doors etc, complete all as specified and as directed.

S&F for 75mm bore UPVC/PVC (SWR) vent cowl etc, complete all as specified and as directed.

S&F for 110 mm bore UPVC/PVC (SWR) vent cowl etc, complete all as specified and as directed.

Supply and fix 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed to wall ceiling or in floors etc. complete all as specified and as directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.

Cutting and grooving of wall for fixing of CPVC pipe lines and after fixing of CPVC pipe line and making good of all cutting surfaces etc complete all as specified and directed.

S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow, Tee, bends, unions, sockets, male and female Threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

S&F Tubes, ‘medium grade’ galvanised, 15 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F in repair for gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed.

S&F in repair for 20mm gun metal, globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as directed.

Cutting holes into or through brick/ stone walls built in cement mortar of superficial area n exc 150 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F stainless steel sink with drainage board, 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement mortar to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed. Make : Nirali/Blue star ISI marked.

Supply and fix in repairs stainless steel sink overall size 495mmx420mm bowl size 410mmx330mmx160mm made out of stainless steel 1 mm thick for kitchen with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall, CI brackets and connecting to union / pipe complete all as specified and as directed. Make : Nirali/Blue star ISI marked.

S&F in repairs stainless steel kitchen plate rack of Cat No P-348 etc complete all as specified and directed. Make: Prayag polymers Pvt Ltd or equivalent as approved by GE.

Supply and fixed in repairs PVC waste pipe 32/40 mm dia fixed to WHB/Kitchen Sink complete all as specified and as directed

S&F in repairs vitreous china water closet 'Orissa' pattern of size 580mm X 440mm, white with integral foot rest (excluding flushing cistern), but including PVC flush pipe and provision of cement concrete bedding complete all as specified and as directed.

S&F in repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed..

S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed.

S&F in Low level flushing cistern 10 ltr capacity, PVC incl waste pipe, down take pipe, pair of CI brackets and all accessories complete all as specified and as directed.

Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

Supply and fix in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed. Make: CAT No 92072 of HINDWARE (S-10/P-18) Pastel colour or equivalent in PARRYWARE/CERA/JAQUAR as approved by GE.

S&F in repairs vitreous China counter top wash basin of size 600 x 450 x 190 mm with 32mm dia brass chromium plated waste coupling and cast iron brackets complete all as specified and as directed. Make: CAT No Jaquar Code- QNS-WHT-7601AT No 10051 or equivalent in HINDWARE PARRYWARE/CERA as approved by GE.

Material and labour for cutting of granite slab for fixing of under counter wash basin including rounded and grinding the stone with necessary arrangements complete all as specified and as directed.

Supply and fix in repairs towel ring brass chromium plated complete all as specified and as directed. Make: CAT No F880007 or HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fix in repairs of brass chromium plated towel rack 600 mm long with lower hangers, brass screws and wooden/plastic cleats complete all as specified and as directed. Make: CAT No F840010 or HINDWARE or equivalent in JAQUAR / PARRYWARE/CERA as approved by GE.

Supply and fixed in repairs soap dish brass complete all as specified and as directed Make: CAT No F880011 of HINDWARE or equivalent model in JAQUAR/ PARRYWARE/CERA as approved by GE

Supply and fix in repairs toilet paper holder with flap, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed. Make: CAT No F880003 or HINDWARE or equivalent in JAQUAR/PARRYWARE/CERA as approved by GE.

S&F in repairs CP brass 32 mm bottle trap for wash basins / urinals with inlet and outlet screwed for pipe connections including necessary packing, union and cap and fixed complete all as directed. Make :Jaquar, Code ALD 769 or equivalent in Hindware/Parryware/Cera as approved by GE.

Supply and fix in repairs 15mm bore brass Chromium plated wall mixer with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges for mixing hot and cold water, screwed down complete all as specified and as directed. Make: F330020 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fix in repairs 15mm bore brass Chromium plated wall mixer with provision for both hand shower and overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges (without) hand and overhead shower for mixing hot and cold water, screwed down complete all as specified and as directed. Make: F330022 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fix in repairs 15mm bore brass Chromium plated central hole basin mixer with out popup waste system with 450 mm long braided hoses, screwed down complete all as specified and as directed. Make: F330014CP of HINDWARE or equivalent in Parryware/CERA/JAQUAR as approved by GE.

Supply and fix in repairs over head shower 80mm dia round shape multi flow (ABS Body chrome plated with gray face plate) with rubit cleaning system complete all as specified and as directed. Make: CAT No F160008 of HINDWARE or equivalent in PARRYWARE/CERA/JAQUAR as approved by GE.

Supply and fix in repairs 125 mm dia brass chromium plated shower rose with swivel joints with stainless steel arm duly ISI marked complete all as specified and as directed.

Supply and fix in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc including screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed. Make: CAT No F160038 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fix in repairs 15mm dia brass chromium plated Two way Bib tap with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: CAT No F200004FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fix in repairs 15mm dia brass chromium plated Bib tap with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: CAT No F200004FT of HINDWARE or equivalent in PARRYWARE/CERA/JAQUAR as approved by GE.

Supply and fix in repairs 15 mm bore brass chromium plated Pillar cock long neck with aerator, high pressure with crutch handle, screwed down, and screwed for iron pipe or for unions complete all as specified and as directed Make: CAT No F330002CP of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fix in repairs of 15 mm bore stop cock, brass chromium plated angle cock with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: CAT No F200005FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fixed in repairs brass chromium plated concealed stop cock, regular body with adjustable wall flange screwed down, high pressure, with crutch handle, screwed both ends for 15mm dia bore iron pipe or for unions complete all as specified and as directed. Make: CAT No F200005FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

S&F in repairs CP angle cock 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs Pillar taps, fancy type, chromium plated, screwed down, high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and as directed.

Supply and fixed in repairs PTMT bath room mirror cabinet of size 330x430mm complete all as specified and as directed Make: CAT No 551 of PRAYAG or equivalent model in POLYTUF as approved by GE

Supply and fixed in repairs of 6mm thick frame less beveled rectangular wall mount plain mirror of any size and fixing of necessary Stainless steel finish solid mirror stud (12mmX19mmX2.5cm) complete all as specified and as directed Make: Saint-gobain, Modi guard or equivalent model as approved by GE

S&F in repair CP corner glass 12mm thick with brass bracket screws etc., complete all as specified and directed.

S&F in repairs Towel Rail, 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed.

Pragathi Infrastructure Co.

S.R.M.K Enterprises

SKY CONSTRUCTIONS

Vara Enterprises

abhilasha constructions

M/S DIVIJA BUILDERS