Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.0 LAccepted-AOC AT BALANTAR POST PATHARA VIA KHALLIKOTE DIST GANJAM ORISSA 761029 | GANJAM | ODISHA | 761029 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹12.7 L+₹1.2 L (10.2%)Rejected-Finance AT AMRITPUR PO NB CHILKA VIA BALUGAON DIST KHURDA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L2 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹21,000
Closing Date
7 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Chilka
Garrison Engineer Chilka PO INS Chilka Distt Khordha Odihsa 752037
REPAIRS TO JOINERY , ROLLING SHUTTER AND CONNECTED WORKS IN ZONE-I AREA AT INS CHILKA UNDER GE CHILKA
2022_MES_548825_1
GE/CHL/8815 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Chilka
MES Enlisted Contractor of Class E category a i
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer Chilka
₹21,000
Yes
11 Nov 2022
30 Aug 2022
14 Oct 2022
30 Aug 2022
7 Oct 2022
15 Sept 2022
30 Aug 2022 - 8 Sept 2022
Amount
Taking down shutters of any descrption not exceeding 1 Sqm each from chowkhats, complete all as specified and as directed.
Taking down shutters of any description, exceeding 1.0 Sqm but not exceeding 2 sqm each, from chowkhats, complete all as specified and as directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each complete all as specified and as directed. Note:- Taking down shutter and refixing in same opening complete all as specified and as directed.
Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed. Note- Taking down shutter and refixing in same opening.
S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
S&F 30 mm thick 2nd class hard wood, Glazed & skeleton window shutters, open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (b); supplied & fitted to Chowkats complete all as specified and as directed.
All as per item No 8 above but without sash bars complete all as specified and as directed.
S&F 35 mm thick 2nd class hard wood, Glazed & skeleton door shutters, open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a); supplied & fitted to Chowkats complete all as specified and as directed.
S&F 35 mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowklats complete all as specified and as directed.
S&F 300 mm long mild steel ordinary rat & tail rod pattern spring including roller and roller plate complete all as specified and as directed.
S&F in repairs 300 mm long mild steel ordinary rat & tail rod pattern spring including roller and roller plate complete all as specified and as directed.
S&F 150 mm long extruded aluminium alloy handle, cast type anodised complete all as specified and as directed.
S&F 125 mm long extruded aluminium alloy handle, cast type anodised complete all as specified and as directed.
S&F 75 mm long brass handle, cast type polished body complete all as specified and as directed.
S&F in repairs 125 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.
S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 125 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F in repairs 125 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F in repairs 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.
S&F in repairs 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.
S&F in repairs 150 mm size aluminium, plate type II, gate and shutter, hooks and eyes complete all as specified and as directed.
S&F 100 mm long, hasp & staple, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screw complete all as specified and as directed.
S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F 75 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F 3 mm thick, sheet glass, ordinary quality and glazing with oil putty / beading in square not exceeding 0.5 sqm each pane complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty / beading in square not exceeding 0.5 sqm each pane fixed complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and including 2nd class hard wood beads of suitable size straight (any size) for glazed or gauged joinery , renewed including mitred etc and painting exposed surfaces of beads with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and including 2nd class hard wood beads of suitable size straight (any size) for glazed or gauged joinery , renewed including mitred etc and painting exposed surfaces of beads with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F mild steel work as in flat iron for hold fasts etc, complete all as specified and as directed.
M&L applying two coats of synthetic enamel paint over a coat of pink primer including preperation of new wooden surfaces of any description exceeding 10 cm width or girth complete all as specified and as directed.
S&F in repairs door closer, hydraulically regulated, designation No. 3, universal type suitable for door shutters of weight between 61 to 80 Kg with aluminium (die cast) body complete all as specified and as directed.
S&F in repairs 40 mm dia, cupboard knobs fixed with nuts, screws and washers of aluminium anodised complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick style considering of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded both side Prelam PVC sheet used PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification and as shown on drawing complete all as specified and as directed.
Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key,scrubbing down with water etc complete all as specified and as directed.
M&L 10mm thick rendering on brick work or concrete surface in cement mortar 1:6 , surface finished even and fair complete all as specified and as directed.
M&L applying two coat of oil bound distemper over a coat of primer including preparation of newly plastered surface of walls complete all as specified and as directed.
M&L applying three coats of white wash on walls including preparation of newly plastered surface of walls complete all as specified and as directed.
S&F in repairs 0.56 mm thick plain aluminium sheeting in straight flashing to the shutter with screw of suitable size complete all as specified and as directed.
S&F in repairs 140 mm Floor door stopper of aluminium alloy body and tongue, anodised with hard draw steel spring complete all as specified and as directed.
S&F in repairs 18 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws in timber frame work in cup board shelves complete all as specified and as directed.
S&F Continuous piano hinges mild steel, bright finish or electrogalvanised 30mm width of flaps (when open) complete all as specified and as directed.
S&F in repairs 75 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
M&L applying one coat of synthetic enamel paint including preperation of old painted wooden surfaces complete all as specified and as directed.
S&F framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted of forged into spikes or framed guard bars and similar work complete all as specified and as directed.
M&L applying two coat of synthatic enamel paint over one coat of red oxide primer including preparation of new steel surface over 10 cm width or girth complete all as specified and as directed.
Cutting holes in brick walls, exceeding half but not exceeding one brick wall built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3, or in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and as directed.
S&F in repairs mild steel mortice lock, 4 levers, vertical type, size 65mm long complete all as specified and as directed.
Taking down existing unserviceable rolling shutter of any description not exceeding 10 sqm ,oiling , greasing and certain other minor work to make its fully functional and refixing of cover hood in same position complete all as specified and as directed.
S&F in repairs 20 mm dia stainless steel curtain rod with fixing designer bracket complete all as specified and as directed.
S&F in repairs door seal with brush(as per sample) fixed with screw at the bottom of doorl complete all as specified and as directed.
Taking down shutter of any description not exceeding 1 sqm , easing , adjusting and re-fixing in the same openig complete all as specified and as directed.
Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm, easing , adjusting and re-fixing in the same openig complete all as specified and as directed.
S&F for anodised powder coated of any colour (thickness of powder coated not less than 50 micron) aluminium grill of Make "Deco grill" and DG-202 model with aperature size 60 mmx45mm fixed with suitable channel complete all as specified and as directed
S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window or ventilator shutters side hung type without sash bars, aluminium section minimum weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading ,screws,anodised aluminium fitting such as peg stay 150 mm long -01 No, 100 mm long aluminium hinge type B-21-02 No,aluminium handle of suitable size -02 No and other accessories complete all as specified and as directed. Make of Aluminimum section:-Jindal/Hindalco/Ajit India Ltd Note :- Glass or stainless steel wire cloth shall be measured and paid seperately under respective item as considered therein
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .