EI work

Amount

Dismantling the existing old & unusable electrical wiring, switch board,power plugs, fans point etc. all the entire floor from its own position with own tools & tackles, manpower and mending good the damages as per G.S.(Salvage value of less cost materials)

Supplying and fixing double door 6 way Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Legrand- Enclosure (607716)/ Siemens/ABB). (D-10/14)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+4 way (Legrand-Enclosure (607710)/Siemens/ABB). (D-9/13).

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (Legrand/Siemens/ABB) (D-5/6)

415 V, 63 A FP Isolator

240 V, 32 A DP Isolator

Supplying and fixing following type MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Legrand/Siemens/ABB). (D-6/7)

240 V, 6-32 A SP MCB

Supply & fixing of blank plate for modular box- NS

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. Average run 6 mtr (E-14/2b)

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish ON BOARD (E-15/4a.)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. (E-16/7)

20 mm. size

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.((Polycab/Havells/Finolex/RR Kabel) (E-9/1)

2 x 2.5 sqmm + 1 x 1.5 sqmm

3 x 1.5 sqmm.

2 x 4 sqmm + 1 x2.5 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-5/9]

Supply & Fixing 240 V, 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-6/17a]

Supply & Fixing 240 V, 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required[E-6/17b]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required[E-7/26]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall as per GS. (E-4/11)

150 mm x 100 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws. (E-5/13)

150 mm x 100 mm x 65 mm

Supplying of single LED Tube light with fitting complete with all accessories & 230 V. 20W. T-LED Tube.(Philips - TMC 501 P 1xT-LED 22W P3241 with one no. LED tubes 20W B2B 865 T8 / CG - IGP161LT8-16 & 1 no. LTT8-8/Wipro).(N-S)

Supply & fixing of 230 V, 9 W LED Lamp fixed on batten /angular Holader as per GS.

Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener (C-2/14b)

Supply & Delivery of 1200 mm dia sweep AC 68 Watt,safety wire &P2 capacitor ceiling fan(colour approved by EIC) with complete accessories like blades, canopy, fork, rubber bush etc.without regulator. (Orient Quasar Ornamental/ Crompton- Aura PVC antidust/ ).(N-S)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire as per G.S. (C-3/21-a)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.[E-6/18a)

Supply &Delivery of 230 V, 45 W street light fittings.(Philips-BRP046 LED 36 CW MR S1 PSU GR/similar of Crompton/similar of Wipro).

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [C3/18]

Supplying of 240 V 300 mm/ 9" dia ( 920 rpm ) exhaust fan (EPC /Crornpton/Orient ). [NS]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust. (C-4/28).

Supply & Fixing Al. louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 23 cm Exhaust fan (9") [D-14/32 a]

Excavation of soil for installation of Earth Electrode and filling & ramming. - Soft soil. (G-1/1.).

Earthing with 50 mm dia(ISI medium) GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe. (G-1/2.a.)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the busbar as per GS. (G-2/4.a.).

Connecting the equipments to earth busbar incl. S & F 10 SWG GI (Hot Dip) wire on wall/floor as per GS. (G-2/5-iv).

Supplying & fixing medium gauge 40 mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. (F-6/11-c)

Supply and Delivery of following size of 1.1 Kv grade XLPE/PVC armoured Al cable. (Polycab/Gloster/RR cable). (N-S)

4 core 35 sq mm

3 core 6sq mm

Laying of following size of carmoured Al cable on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. As necy., mending good damages and painting. (F-1/2-d).

4 core 35 sq mm

3 core 6 sq mm

Supplying and fixing of following size ompression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cable.(F-4/7).

4 core 35 sq mm

3 core 6 sq mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. (F-5/8-b).

4 core 35 sq mm

3 core 6 sq mm

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 6A MCB, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws with bolts, nuts etc. including painting with anticorrosive paint. NS

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[E-9/17]

GUHA ENTERPRISE (BID ID -5641376)

Arya Electric (BID ID -5721804)

EFFORTECH (BID ID -5722819)