8670 MAINT REPAIR REPLACEMENT OF STREET LIGHT FLOOD LIGHT HIGHMAST LIGHT GARDEN LIGHT AND OTHER ELECTRICAL ALLIED WORK IN AICTS AND CONNECTED AREA OF AGE EM I OF GE S PUNE

Amount

Repair / maintenance of street / security lights any type, flood lights, post top lanterns or any other external lights in its position fixed on pole /building structure or by taking down to ground, if required, testing all the components / parts, wiring etc, identifying and replacing the defective components like electronic driver, surge protection device (SPD) connection wires/ cable, MCB etc including re-fixing the fitting to its original position (if taken down), including repair / maintenance of street light control timer & junction box complete all as directed by Engr-in-charge. Note:- (i) The cost of labour and allied expenses deemed to be included in unit quoted rates of this item. (ii) All spare parts required for smooth functioning of street light will be provided by Engr-in-Charge free for fixing only. (iii) One electrician and one helper to be present ON WORKING DAYS during the contract period for attending the complaints with ladder and tools, The contractor's representative will report to concerned JE E/M at 0900 hrs daily to collect the list of defective street light fittings and will submit the completion report on the same day before 1700 hrs to the JE E/M.

Item no.1.00 contd............... (iv) The contractor has to rectify the defects / repair and make the street light functional within 24 hours from the time the list of defective street lights is handed over to him / his rep by the concerned JE E/M. In case the street light is not made functional for whatsoever reason within the specified time limit, an amount of Rs 150/- per such defective street light per day will be recovered from the amount due to him through RAR / Final Bill. The contractor shall carry out repair / maint work simultaneously for AICTS and connected area (v) T & P and Vehicle mounted hydraulic ladder (If required) shall be arranged by the contractor and the cost of same shall be deemed to be included in unit quoted rate of this item. (vi) The contractor shall maintain proper record of repair / maint in a binded register duly bringing out the details of spares replaced on each and every street light and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vii) Attending of one number of complaint and make it functional shall be measured as one job.

Supply and fix in replacement Electronic driver suitable for 90watts LED security light fittings complete all as directed by Engr-in-charge.

Supply and fix in replacement Electronic driver suitable for 36/40/ 45 / 48 / 50/60 watts LED road way/Flood light/post top complete all as directed by Engr-in-charge.

Supply and fix in replacement Electronic driver 10 watt bolard fitting complete all as directed by Engr-in-charge.

Supply and fix in replacement PCB LED set for 10 watt suitable for bollard fitting complete all as directed by Engr-in-charge.

Supply and fix in replacement PCB LED set suitable for 40/70 watt Post Top fitting complete all as directed by Engr-in-charge.

Supply and fix in replacement Electronic driver suitable for 150 watts flood lightscomplete all as directed by Engr-in-charge.

Supply and fix in replacement Electronic driver suitable for 100 watts flood lights complete all as directed by Engr-in-charge.

Supply and fix in replacement Electronic driver suitable for 60/50/30 watts flood lights complete all as directed by Engr-in-charge.

Supply and fix in replacement surge protection device(SPD) of capacity 10KV compatible with industrial & outdooor LED fixtures complete all as specified and directed by engr-in -charge.

Supply and fix in replacement of MCB SP 230 volts B curve 5 to 32 amps complete all as specified and directed

Supply and fix in replacement of MCB SPN 230 volts B curve32 amps complete all as specified and directed

Supply and fix in replacement of MCB TPN 230 volts C curve 63 amps complete all as specified and directed

Supply and fix in replacement of digital time switch, DIN type daily / weekly with 25 ON/OFF programmes , 16 amps 250 volts AC complete all as specified and directed

Supply and fix in replacement of Power contactor 16/18 amps 3 pole complete all as specified and directed

Supply and fix in replacement of Power contactor 40 amps 3 pole complete all as specified and directed

Supply and fix in replacement of PVC insulated Copper conductor FRLS grade three core cable 1.5 sqmm, ISI marked complete all as specified and directed

Supply and fix in replacement PVC insulated Copper conductor FRLS grade three core cable 2.5 sqmm, ISI marked complete all as specified and directed

Supply and fix in replacement MCCB 63 Amps 4 pole 415 volts complete all as specified and directed

Supply and fix in replacement relay of capacity 110V-240V AC Capacity complete all as specified and directed

S&F in repair integral LED Street Light Luminaire 36W comprising of epoxy powder coated pressure die cast aluminium housing, enclosed with toughened glass cover , energy efficient LED, lens and IP 66 protection with system efficiency 125 lm/W complete all as specified and directed by Engr in charge. Make- HALONIX CAT NO- HLSLD-14-36-CWL-R-P or equivalent cat part in crompton / Luker.

S&F in repair Integral LED Street Light Luminaire 72W comprising of epoxy powder coated pressure die cast aluminium housing, Enclosed with toughened glass cover , energy efficient LED, lens and IP 66 protection with system efficiency 125 lm/W complete all as specified and directed by Engr in charge. Make- HALONIX CAT NO- HLSLD-01-72-CWL-R-P or equivalent cat part in crompton / Luker.

S&F in repair Integral LED Street Light Luminaire 90W comprising of epoxy powder coated pressure die cast aluminium housing, Enclosed with toughened glass cover , energy efficient LED, lens and IP 66 protection with system efficiency 125 lm/W complete all as specified and directed by Engr in charge. Make- HALONIX CAT NO- HLSLD-01-90-CWL-R-P or equivalent cat part in crompton / Luker.

S&F in repair Integral LED Street Light Luminaire 140 W comprising of epoxy powder coated pressure die cast aluminium housing, Enclosed with toughened glass cover , energy efficient LED, lens and IP 66 protection with system efficiency 125 lm/W complete all as specified and directed by Engr in charge. Make- HALONIX CAT NO- HLSLD-06-140-CWL-R-P or equivalent cat part in crompton / Luker.

S&F in repair LED flood lights fitting 30 watt CW/WW/GR/RGB highly efficient with integral type mid power made of pressure die cast aluminium housing with toughened glass and IP 66 protection with system efficiency 100 lm/W complete all as specified and as directed.

S&F in repair LED flood lights fitting 50 watt CW/WW/GR/RGB highly efficient with integral type mid power made of pressure die cast aluminium housing with toughened glass and IP 66 protection with system efficiency 100 lm/W complete all as specified and as directed.

S&F in repair LED flood lights fitting 120 watt highly efficient with integral type mid power made of pressure die cast aluminium housing with toughened glass and IP 66 protection with system efficiency 125 lm/W complete all as specified and as directed. Make- HALONIX CAT NO- HLSLD-ML-27-120-CWDL-R-P or equivalent cat part in crompton / Luker.

S&F in repair LED flood lights fitting 150 watt highly efficient with integral type mid power made of pressure die cast aluminium housing with toughened glass and IP66 protection with system efficiency 125 lm/W complete all as specified and as directed. Make- HALONIX CAT NO- HLSLD-ML-27-150-CWDL-R-P or equivalent cat part in crompton / Luker.

S&F in repair LED flood lights fitting 250 watt highly efficient with integral type mid power made of pressure die cast aluminium housing with toughened glass and IP66 protection with system efficiency 125 lm/W complete all as specified and as directed. Make- HALONIX CAT NO- HLSLD-ML-27-150-CWDL-R-B-P or equivalent cat part in crompton / Luker.

S&F in repair LED flood lights fitting 300 watt highly efficient with integral type mid power made of pressure die cast aluminium housing with toughened glass and IP66 protection with system efficiency 125 lm/W complete all as specified and as directed. Make- HALONIX CAT NO- HLSLD-ML-27-150-CWDL-R-B-P or equivalent cat part in crompton / Luker.

S&F in replacement inverter RTC operational LED street light 90 Watts pipe mounted HSG made of pressure die cast aluminium alloy for effective thermal management (heat sink) excellent corrosion resistant tempered protective toughened glass or PC cover IP 66 LED street light, system wattage consist of max 45 watt composite/individual optical lens cover to ensure better uniformity. High efficiency long life SMD LED module with lumen efficacy>110 lm/W within built emergency inverter operational principal i.e on emergency inverter light output -initial lumen at battery mode operate at 15-20% of rated Im within built RTC ON/OFF Timing Auto ON(Astro Sun set-30 mins) and Auto Off (Astro Sun Rise). Emergency Inverter back up 1.5-2 hrs at battery fully charge STC operation(3.7 v/ oooo WH Li-ion battery) CRI>70,IP 66 Color temp5700 K THD<10% and PF>0.95 Life class of 50,000 hrs@L70,Operating temperature -10 to+45 Deg C, input supply voltage Range 140-270 V Frequency 50-60 Hz, internal surge protection 5 KV Test certificate to be submitted, certificationLM79 for luminaries LM 80 for LED source, complete all as directed by Engr-in-Charge. Make : HALONIX -HLSLD-ML04-90CWL-INV-RTC-R-B or equivalent cat part from the makes as mentioned here-in-after.

S&F in replacement inverter RTC operational LED flood light 60 Watts pipe mounted HSG made of pressure die cast aluminium alloy for effective thermal management (heat sink) excellent corrosion resistant tempered protective toughened glass or PC cover IP 66 LED street light, system wattage consist of max 45 watt composite/individual optical lens cover to ensure better uniformity. High efficiency long life SMD LED module with lumen efficacy>110 lm/W within built emergency inverter operational principal i.e on emergency inverter light output -initial lumen at battery mode operate at 15-20% of rated Im within built RTC ON/OFF Timing Auto ON(Astro Sun set-30 mins) and Auto Off (Astro Sun Rise).Emergency Inverter back up 1.5-2 hrs at battery fully charge STC operation(3.7 v/ oooo WH Li-ion battery) CRI>70,IP 66 Color temp5700 K THD<10% and PF>0.95 Life class of 50,000 hrs@L70,Operating temperature -10 to+45 Deg C, input supply voltage Range 140-270 V Frequency 50-60 Hz, internal surge protection 5 KV Test certificate to be submitted, certificationLM79 for luminaries LM 80 for LED source, complete all as directed by Engr-in-Charge. Make : HALONIX -HLSLD-ML30-60 CWL-INV-RTC-R or equivalent cat part from the makes as mentioned here-in-after

Taking down unserviceable post top / gate light and supply and fix LED Post top light fitting CW/WW, 15 watts with die cast aluminium spigot, spun aluminium powder coated top cover Aluminium PDC heat sink, opal PC diffuser and clear acrylic for 360 degree indirect light, IP 65 protection, resistant to impact and corrosion, glare free and better uniformity, including necessary fixing arrangements as required at site complete complete all as specified and as directed by Engineer-in-Charge.

Taking down unserviceable post top/gate light and supply and fix LED Post top light fitting CW/WW, 40 watts with die cast aluminium spigot, spun aluminium powder coated top cover Aluminium PDC heat sink, opal PC diffuser and clear acrylic for 360 degree indirect light, IP 65 protection, resistant to impact and corrosion, glare free and better uniformity, including necessary fixing arrangements as required at site complete all as specified and as directed by Engineer-in-Charge.

S& F in repair 120 watt LED ornamental street light with spun aluminium designed housing with clear acrylic for city beautification complete all as specified and directed by Engr in charge. Make- HALONIX CAT NO- HLOSL-04-120-CWL or equivalent cat part in Crompton / Luker makes.

Taking down unserviceable post top/gate light and supply and fix LED Post top light fitting CW/WW, 70 watts with die cast aluminium spigot, spun aluminium powder coated top cover Aluminium PDC heat sink, opal PC diffuser and clear acrylic for 360 degree indirect light, IP 65 protection, resistant to impact and corrosion, glare free and better uniformity, including necessary fixing arrangements as required at site complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs garden security light fittings LED CW/WW type suitable for 10 watt LED inverted pyramid tripod type LED bollard with soft 360 light, IP 65 protection, resistance to corrosion complete including with necessary fixing arrangements with PCC (1:3:6 ) type C-1 as in foundation of suitable size, operation on 230 volt 50 Hz AC supply including all standard fittings and fixture complete all as directed by Engineer-in-Charge (Make :- Crompton Cat No LBLSN-10-CDL/WW or equivalent cat part in Wipro / Philips / Helonix)

Supply and fix in repairs garden security light fittings LED CW/WW type, 10 watts LED bollard aluminium pipe housing with soft 360 light, IP 65 protection, resistance to corrosion complete hight 640/800/1000 mm including with necessary fixing arrangements with PCC (1:3:6 ) Type C-1 as in foundation of suitable size, operation on 230 volt 50 Hz AC supply including all standard fittings and fixture complete all as directed by Engineer-in-Charge

Dismantling/ taking down of pole up to 16/21 metre height of high mast light by engaging suitable capacity crane and repairing by replacing of unserviceable top pulley of pole and other part such as winch motor, steel wire, power cable and servicing, toping of oil and greasing the gear wheel assembly and hoisting, re-fixing and connecting up complete all as directed by Engr in charge. Note:- a) Repair of light fittings & light fitting spares such as steel wire, motor, power cable etc will be measured and paid separately. b) The entire work shall be carried out with well experienced professionals who undertake the high mast poles dismantling /repair works. c) Minor spares such as screws, bolt / nuts, grease etc shall provided by the contractor without any extra cost.

Supply and fix in repair stainless steel rope twisted of size10mm/6 mm dia with necessary connections proper binding on both sides from bottom drum mast top connecting hook including taking down old unserviceable complete all as specified and directed by Engr-In-Charge

Disconnecting electric connection and taking down carefully fractional motor from highmast housing of any type and capacity, removing the burnt winding of motor and M&L for rewinding the same with super enameled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and refixing to original position complete all as directed by Engineer-in-charge.

S & F in replacement of factory made PVC Junction boxes of size 250x200x80mm for street light fittings including with weather proof IP-54 protection, hinged door, with Bakalite connector 100 Amps capacity, 4 way and 01 No. MCB SP of 6 Amp, necessary fixing arrangement with two nos of clamp, nuts, bolts, including 2 Nos. of suitable size of double compression cable glands for cable entry and exit complete all as specified and directed by Engr-In-Charge

S & F in replacement factory made PVC Junction boxes of size 140mm x 140 mm x 95 mm for out door light fittings, including with weather proof IP-54 protection, hinged door, with Bakalite connector 100 Amps capacity, 4 way and 01 No. MCB SP of 6 Amp, necessary fixing arrangement with 02 nos. of clamp, nuts, bolts, including 2 Nos. of suitable size of double compression cable glands for cable entry and exit complete all as specified and directed by Engr-In-Charge

S& F GI tubing light grade with all fitting like bend elbow socket etc 40 mm dia ISI marked with all fittings laid in trenches and fixed pole by flat iron clamps, nut, bolt, washers suitable size including refixing of existing cable complete all as specified and directed.

S& F GI tubing light grade 50 mm dia ISI marked with all fittings laid in trenches and fixed pole by flat iron clamps, nut, bolt, washers suitable size complete all as specified and directed.

M&L for removing existing damaged reflected strips from LT street pole and supply and fixing of new 2 inch width retro reflective tape fixed to Street light Poles with red colour complete all as directed by Engr-in- Charge

M&L for removing existing damaged reflected strips from pole supply and fixing of new 2 inch width retro reflective tape fixed to Street light Poles with yellow colour complete all as directed by Engr-in- Charge

M&L for removing existing damaged reflected strips from pole supply and fixing of new 2 inch width retro reflective tape fixed to street light poles with white colour complete all as directed by Engr-in- Charge

M & L for making hole on a street light pole top and bottom for entry of service wire of 2.5 /1.5 sqmm disconnecting the existing service connection from junction box and fitting and same has been reconnecting to junction box and fitting complete all as directed by Engr-in-charge. Note:- Service wire will be measured & paid for separately

Labour for trimming / pruning tree branches overhanging or interfering or obstructing electrical pole or street lights complete all as directed in such a way that the clearance between Street light pole and tree branches should not be less than 1.5 mtrs around the Pole / Fitting and disposal where directed not exceeding 50 mtr complete all as specified and as directed by Engr-in-Charge. Note- (i) The cost of T&P / ladder required for trimming and punning of tree or branches deemed to be included in unit quoted rate. (ii) Distance between two poles will be measured as one span.

Taking down unserviceable old bracket from street light pole and supply and fix new street light bracket made out of MS pipe heavy duty 40 mm dia and not exceeding 1.5 mtr in length for fixing of fittings with two nos. of MS clamp fabricated out of MS flat of suitable size including nut, bolt, washers etc to fix the bracket on pole complete all as directed by Engr-in-charge.

M & L for fixing galvanised Steel hexagonal lantern carraige suitable for 04 Flood Light fiiting made of GI Pipe of suitable dia, medium grade hollow rectangular section for top including nut & bolt and duly painted complete all as directed. Note:- (i)The drawing of tringular lantern carraige will be approved by Engr-in-Charge. (ii) Febrication Charges deemed to be included in unit quoated rate.

Dismantling unserviceable steel poles / struts and removing from site, any size including dismantling of PCC complete all as directed.

Supply, errecting and fixing in replacement of steel tubular swaged welded pole of over all height 9.0m long, 410-SP-22 type, conforming to IS-2713 (Part I to III 1998) with cast iron base plate, finial tapper plug cap, bolt, nut and washer etc., with and including the following provisions complete all as specified and directed by Engr-in-charge:- (i) Pole upto 1.5 m top of coping shall be painted with 2 coats of black and white strips alternate 30cm each over one coat of red oxide primer. (ii) Steel tubular pole above 1.5 m shall be painted with 2 coats of aluminium paint over a coat of red oxide primer. (iii) Pole below ground shall be treated with one coat of bituminous paint. (iv) Each poles shall be numbered.

Taking down of old unserviceable cable and Supply, lay, jointing, testing and commissioning of LT under ground cable XLPE insulated and sheathed heavy duty armoured with aluminium conductor 1100 volt grade with cable glands, lugs etc complete all as specified and directed for the following sizes of cable:- (a). 6 sqmm 4 core

(b). 10 sqmm 4 core

(c). 16 Sqmm 4 core

(d). 25 Sqmm 4 core

(e). 35 Sqmm X 4 Core

Excavation in trenches not exceeding 1.5 m wide and not exc. 1.5 m depth for laying cables, foundation for pole etc and getting out in soft/loose soil complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exc. 1.5 m depth for laying cables, foundation for pole etc and getting out in Hard /Dence soil complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exc. 1.5 m depth for laying cables, foundation for pole etc and getting out in Soft / dis-itegrated rock complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and exc. 1.5 m depth but not exc. 3.0m as foundation for pole etc and getting out in soft / loose soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

M&L for laying reinforced cement concrete pipes, class NP2 of dia 100 mm, 2 nos half round (for bottom and top) and before laying exacaved area shall be levelled complete all as specified and directed Engr-in-charge.

Material & labour cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation complete all as specified and directed.

Material & labour PCC 1: 3 : 6 type C-1 (using 20 mm graded crushed stone aggregate) as in stays and coping of poles including necessary form work incluidng dismandiling of existing PCC complete all as specified and directed.

M&L for cutting of hard standing by providing suitable T&P to make suitable size bore for fixing GI pipe in road / cutting hard stranding etc. and making good the disturbed surface and matching with existing with PCC 1:2:4, Type B-1, by using 20mm graded stone aggregate, 100mm thick (Chequered tiles / Road / PCC) complete all as directed by Engr-in-charge

Supply and laying 32mm bore, GI pipe, light grade, laid under roads / floor / trenches with & including necessary fittings and fixtures complete all as specified and directed.

S & F in replacement of illuminated display board of minimum size (2.5 x 0.2 x 0.9) Mtr (LxBxH) with Flex of Light Blue (MES Colour), Colour of letters shall be white, outer side fabrication bordered with Aluminium angle Frame of size (20 x 20) mm x 3mm thick, inner side fabricated with 12mm MS square bar and aluminium sheet for top, bottom, back side and left side and right side of the display board, (35 X 35 ) medium grade hollow rectangular bar duly painted with black color shall be fixed both side of board with 2 Nos. 30 mm x 4mm thick MS flat of 0.20m length welded to GI pipe and nut bolt and washer with display board not less than 2.50m and PCC 1:4:8 for foundation including all internal wirings and illuminated with LED 40 W Tube light fitting 01 No, SMC/FRP Junction Box 140mm x 140mm x 95mm inner dimension make Sintex / National, the board must be openable from back side for maintenance of tube light, control wiring etc including its fixing arrangement and written Letters in capital not less than 10 letters and more than 40 letters, size of letters proportion with overall size of board complete all as directed by Engr-in-Charge. Note : (i) Before manufacturing Boards, drawing and design of Board including colour of board shall be approved by Engr-in-charge.

Material and labour for painting of steel tubular pole 9 m height including cross arm, clamp, back plate etc in situ on with one under coat and one finishing coat with aluminium paint after cleaning preparation of surface including making alternate yellow and black strip 30 cm wide 5 nos. with two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge

M&L for testing of fault locating in LT cable with the help of bringing Cable fault locating machine at site complete all as specified and directed by Engr-in-Charge. Note- Machine for locating of fault will be arranged by the contractor at his own cost and nothing extra on this account will be admissible.

M&L in replacement for heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables 6 to 16 Sqmm 4 core including all accessories required and excavation & earthwork complete all as specified and directed by Engr-in-Charge

S&F in replacement for heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables 25 to 35 Sqmm 4 core including all accessories required and earthwork complete all as specified and directed by Engr-in-Charge

S&F in replacement for heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables50 to 70 Sqmm 3.5 core including all accessories required, complete all as specified and directed by Engr-in-Charge

Supply & fix timeline distribution board, timeline 40 amps 3 pole, 230 volts with Astronomincal time switch Cat Part No TL040ASO of Indo Asian or equivalant to L&T /Havells / Schneider, to be fixed for wall and pole with mounting arrangement. The distribution board shall be mounted on MS angle iron frame made out of 40x40x5mm size and which will be grouted 30cm in ground with PCC 1:3:6 type C-1 as in foundation of suitable size and 70 cm (30cm +40 cm) above ground level including with necessary fittings and fixtures complete all as specified and directed by Engr-in-Charge.

Supply and fix in replaement of MCCB, 250 Amps, 25 KA, 4 Pole, 415V with thermal release complete all as specified and as directed.

Supply and fix in replaement of MCCB, 200 Amps, 25 KA, 4 Pole, 415V with thermal release complete all as specified and as directed.

Supply and fix in replaement of MCCB, 100 Amps, 16 KA, 4 Pole, 415V with thermal release complete all as specified and as directed.

Supply and fix in replaement of MCCB, 125 Amps, 16 KA, 4 Pole, 415V with thermal release complete all as specified and as directed.

Attending urgent complaints of operation theatre shadowless type Lights provided in all OTs room for direct / reflection free illumination of AICTS with dual control panel and two domes LED light with various capacity of including replacement of accessories of OT lights. Fault may be due to various switchgear defect, overload, short circuit, earth fault, neutral fault, over heating, high voltage or any other fault to be rectified immediately by OEM of respective make as per site requirement including replacement of defective & worn out parts by new spares parts complete all as directed by Engineer-in Charge. Note :- (i) Spare parts will be measured and paid separately under respective items of BOQ as “Supply only” (ii) Attending one complaint and make it functional shall be measured as one Job.

Supply only in repairs Power Supply unit suitable for OT Light of Dr. Mach (LED 3 SC) and testing for its smooth functioning state and producing test certificate for the same complete all as directed by Engr-in-charge. Make- Dr. Mach or equivalent.

Supply only in replacement display unit suitable for OT Light of Dr. Mach / Hospedia and testing for its funtional state and producing test certificate for the same complete all as directed by Engr-in-charge. Make- Dr. Mach or equivalent.

Supply only in repairs Cluster board suitable for OT Light of Dr. Mach / Hospedia and testing for its funtional state complete all as directed by Engr-in-charge.

Supply only in repairs Sterilizable handle for OT Light of Dr. Mach (LED 3 SC) and testing for its smooth functioning state complete all as directed by Engr-in-charge. Make- Dr. Mach or equivalent.

Supply only in repairs transformer 0-230V, 0-12V/ 500 Va suitable for OT Light of Dr. Mach/ Hospedia and testing for its funtional state complete all as directed by Engr-in-charge. Make- Dr. Mach or equivalent.

S & F in replacement of 12 volt, 26 AH, SMF battery complete as directed by Engineer-in-charge. Make- Exide/Amaron or equivalent make as approved

S & F in replacement of 12 volt, 42 AH, SMF battery complete as directed by Engineer-in-charge. Make- Exide/Amaron or equivalent make as approved

Supply and Fix in replacement integral LED aviation light comprising housing with polycarbonate enclosure, aviation light is to be fixed on highmast light frame/ Over head Tank complete all as specified and directed.

Taking down the letter sign board of any capacity from any hight and repairs/ replacing the defective parts like electronic drivers connection wires, strip ighting and refixing the same to its original position complete all as directed by Engr-In-Charge. Note :- Cost of spare parts of sign board which are required for smooth functioning of sign board shall be deemed to be included in unit quoted rate.

M & L for earthing with galvanised steel earth plate electrode 600x600x6mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I including RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil / strata etc complete all as specified and directed by Engr-in-Charge. Note : GI earthwire and GI protection pipe upto 7.5 mtr length shall be included in this item.

M&L for marking of pole numbers on street light poles with synthetic enamel paint or stickers made out of suitable material of approved shape and size or as per sample provided by Engr-in-charge.

metro electrical services (BID ID -3279104)

Leo Enterprises (BID ID -3279514)

Rama Electricals (BID ID -3279953)

M/s Harshal Traders (BID ID -3279912)

SBS Enterprises (BID ID -3279795)

PROLINK COMPUTERS (BID ID -3278538)

RELIABLE ENTERPRISES (BID ID -3277890)

Crown Chemicals (BID ID -3279929)

SUNIT TRADING CORPORATION (BID ID -3279606)